src/sys/kern/kern_time.c

1018 lines
25 KiB
C

/* $OpenBSD: kern_time.c,v 1.167 2023/10/17 00:04:02 cheloha Exp $ */
/* $NetBSD: kern_time.c,v 1.20 1996/02/18 11:57:06 fvdl Exp $ */
/*
* Copyright (c) 1982, 1986, 1989, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)kern_time.c 8.4 (Berkeley) 5/26/95
*/
#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/systm.h>
#include <sys/clockintr.h>
#include <sys/mutex.h>
#include <sys/rwlock.h>
#include <sys/proc.h>
#include <sys/ktrace.h>
#include <sys/signalvar.h>
#include <sys/stdint.h>
#include <sys/pledge.h>
#include <sys/task.h>
#include <sys/time.h>
#include <sys/timeout.h>
#include <sys/timetc.h>
#include <sys/mount.h>
#include <sys/syscallargs.h>
#include <dev/clock_subr.h>
int itimerfix(struct itimerval *);
void process_reset_itimer_flag(struct process *);
/*
* Time of day and interval timer support.
*
* These routines provide the kernel entry points to get and set
* the time-of-day and per-process interval timers. Subroutines
* here provide support for adding and subtracting timeval structures
* and decrementing interval timers, optionally reloading the interval
* timers when they expire.
*/
/* This function is used by clock_settime and settimeofday */
int
settime(const struct timespec *ts)
{
struct timespec now;
/*
* Don't allow the time to be set forward so far it will wrap
* and become negative, thus allowing an attacker to bypass
* the next check below. The cutoff is 1 year before rollover
* occurs, so even if the attacker uses adjtime(2) to move
* the time past the cutoff, it will take a very long time
* to get to the wrap point.
*
* XXX: we check against UINT_MAX until we can figure out
* how to deal with the hardware RTCs.
*/
if (ts->tv_sec > UINT_MAX - 365*24*60*60) {
printf("denied attempt to set clock forward to %lld\n",
(long long)ts->tv_sec);
return (EPERM);
}
/*
* If the system is secure, we do not allow the time to be
* set to an earlier value (it may be slowed using adjtime,
* but not set back). This feature prevent interlopers from
* setting arbitrary time stamps on files.
*/
nanotime(&now);
if (securelevel > 1 && timespeccmp(ts, &now, <=)) {
printf("denied attempt to set clock back %lld seconds\n",
(long long)now.tv_sec - ts->tv_sec);
return (EPERM);
}
tc_setrealtimeclock(ts);
KERNEL_LOCK();
resettodr();
KERNEL_UNLOCK();
return (0);
}
int
clock_gettime(struct proc *p, clockid_t clock_id, struct timespec *tp)
{
struct proc *q;
int error = 0;
switch (clock_id) {
case CLOCK_REALTIME:
nanotime(tp);
break;
case CLOCK_UPTIME:
nanoruntime(tp);
break;
case CLOCK_MONOTONIC:
case CLOCK_BOOTTIME:
nanouptime(tp);
break;
case CLOCK_PROCESS_CPUTIME_ID:
nanouptime(tp);
timespecsub(tp, &curcpu()->ci_schedstate.spc_runtime, tp);
timespecadd(tp, &p->p_p->ps_tu.tu_runtime, tp);
break;
case CLOCK_THREAD_CPUTIME_ID:
nanouptime(tp);
timespecsub(tp, &curcpu()->ci_schedstate.spc_runtime, tp);
timespecadd(tp, &p->p_tu.tu_runtime, tp);
break;
default:
/* check for clock from pthread_getcpuclockid() */
if (__CLOCK_TYPE(clock_id) == CLOCK_THREAD_CPUTIME_ID) {
KERNEL_LOCK();
q = tfind_user(__CLOCK_PTID(clock_id), p->p_p);
if (q == NULL)
error = ESRCH;
else
*tp = q->p_tu.tu_runtime;
KERNEL_UNLOCK();
} else
error = EINVAL;
break;
}
return (error);
}
int
sys_clock_gettime(struct proc *p, void *v, register_t *retval)
{
struct sys_clock_gettime_args /* {
syscallarg(clockid_t) clock_id;
syscallarg(struct timespec *) tp;
} */ *uap = v;
struct timespec ats;
int error;
memset(&ats, 0, sizeof(ats));
if ((error = clock_gettime(p, SCARG(uap, clock_id), &ats)) != 0)
return (error);
error = copyout(&ats, SCARG(uap, tp), sizeof(ats));
#ifdef KTRACE
if (error == 0 && KTRPOINT(p, KTR_STRUCT))
ktrabstimespec(p, &ats);
#endif
return (error);
}
int
sys_clock_settime(struct proc *p, void *v, register_t *retval)
{
struct sys_clock_settime_args /* {
syscallarg(clockid_t) clock_id;
syscallarg(const struct timespec *) tp;
} */ *uap = v;
struct timespec ats;
clockid_t clock_id;
int error;
if ((error = suser(p)) != 0)
return (error);
if ((error = copyin(SCARG(uap, tp), &ats, sizeof(ats))) != 0)
return (error);
clock_id = SCARG(uap, clock_id);
switch (clock_id) {
case CLOCK_REALTIME:
if (!timespecisvalid(&ats))
return (EINVAL);
if ((error = settime(&ats)) != 0)
return (error);
break;
default: /* Other clocks are read-only */
return (EINVAL);
}
return (0);
}
int
sys_clock_getres(struct proc *p, void *v, register_t *retval)
{
struct sys_clock_getres_args /* {
syscallarg(clockid_t) clock_id;
syscallarg(struct timespec *) tp;
} */ *uap = v;
clockid_t clock_id;
struct bintime bt;
struct timespec ts;
struct proc *q;
u_int64_t scale;
int error = 0;
memset(&ts, 0, sizeof(ts));
clock_id = SCARG(uap, clock_id);
switch (clock_id) {
case CLOCK_REALTIME:
case CLOCK_MONOTONIC:
case CLOCK_BOOTTIME:
case CLOCK_UPTIME:
memset(&bt, 0, sizeof(bt));
rw_enter_read(&tc_lock);
scale = ((1ULL << 63) / tc_getfrequency()) * 2;
bt.frac = tc_getprecision() * scale;
rw_exit_read(&tc_lock);
BINTIME_TO_TIMESPEC(&bt, &ts);
break;
case CLOCK_PROCESS_CPUTIME_ID:
case CLOCK_THREAD_CPUTIME_ID:
ts.tv_nsec = 1000000000 / stathz;
break;
default:
/* check for clock from pthread_getcpuclockid() */
if (__CLOCK_TYPE(clock_id) == CLOCK_THREAD_CPUTIME_ID) {
KERNEL_LOCK();
q = tfind_user(__CLOCK_PTID(clock_id), p->p_p);
if (q == NULL)
error = ESRCH;
else
ts.tv_nsec = 1000000000 / stathz;
KERNEL_UNLOCK();
} else
error = EINVAL;
break;
}
if (error == 0 && SCARG(uap, tp)) {
ts.tv_nsec = MAX(ts.tv_nsec, 1);
error = copyout(&ts, SCARG(uap, tp), sizeof(ts));
#ifdef KTRACE
if (error == 0 && KTRPOINT(p, KTR_STRUCT))
ktrreltimespec(p, &ts);
#endif
}
return error;
}
int
sys_nanosleep(struct proc *p, void *v, register_t *retval)
{
struct sys_nanosleep_args/* {
syscallarg(const struct timespec *) rqtp;
syscallarg(struct timespec *) rmtp;
} */ *uap = v;
struct timespec elapsed, remainder, request, start, stop;
uint64_t nsecs;
struct timespec *rmtp;
int copyout_error, error;
rmtp = SCARG(uap, rmtp);
error = copyin(SCARG(uap, rqtp), &request, sizeof(request));
if (error)
return (error);
#ifdef KTRACE
if (KTRPOINT(p, KTR_STRUCT))
ktrreltimespec(p, &request);
#endif
if (request.tv_sec < 0 || !timespecisvalid(&request))
return (EINVAL);
do {
getnanouptime(&start);
nsecs = MAX(1, MIN(TIMESPEC_TO_NSEC(&request), MAXTSLP));
error = tsleep_nsec(&nowake, PWAIT | PCATCH, "nanoslp", nsecs);
getnanouptime(&stop);
timespecsub(&stop, &start, &elapsed);
timespecsub(&request, &elapsed, &request);
if (request.tv_sec < 0)
timespecclear(&request);
if (error != EWOULDBLOCK)
break;
} while (timespecisset(&request));
if (error == ERESTART)
error = EINTR;
if (error == EWOULDBLOCK)
error = 0;
if (rmtp) {
memset(&remainder, 0, sizeof(remainder));
remainder = request;
copyout_error = copyout(&remainder, rmtp, sizeof(remainder));
if (copyout_error)
error = copyout_error;
#ifdef KTRACE
if (copyout_error == 0 && KTRPOINT(p, KTR_STRUCT))
ktrreltimespec(p, &remainder);
#endif
}
return error;
}
int
sys_gettimeofday(struct proc *p, void *v, register_t *retval)
{
struct sys_gettimeofday_args /* {
syscallarg(struct timeval *) tp;
syscallarg(struct timezone *) tzp;
} */ *uap = v;
struct timeval atv;
static const struct timezone zerotz = { 0, 0 };
struct timeval *tp;
struct timezone *tzp;
int error = 0;
tp = SCARG(uap, tp);
tzp = SCARG(uap, tzp);
if (tp) {
memset(&atv, 0, sizeof(atv));
microtime(&atv);
if ((error = copyout(&atv, tp, sizeof (atv))))
return (error);
#ifdef KTRACE
if (KTRPOINT(p, KTR_STRUCT))
ktrabstimeval(p, &atv);
#endif
}
if (tzp)
error = copyout(&zerotz, tzp, sizeof(zerotz));
return (error);
}
int
sys_settimeofday(struct proc *p, void *v, register_t *retval)
{
struct sys_settimeofday_args /* {
syscallarg(const struct timeval *) tv;
syscallarg(const struct timezone *) tzp;
} */ *uap = v;
struct timezone atz;
struct timeval atv;
const struct timeval *tv;
const struct timezone *tzp;
int error;
tv = SCARG(uap, tv);
tzp = SCARG(uap, tzp);
if ((error = suser(p)))
return (error);
/* Verify all parameters before changing time. */
if (tv && (error = copyin(tv, &atv, sizeof(atv))))
return (error);
if (tzp && (error = copyin(tzp, &atz, sizeof(atz))))
return (error);
if (tv) {
struct timespec ts;
#ifdef KTRACE
if (KTRPOINT(p, KTR_STRUCT))
ktrabstimeval(p, &atv);
#endif
if (!timerisvalid(&atv))
return (EINVAL);
TIMEVAL_TO_TIMESPEC(&atv, &ts);
if ((error = settime(&ts)) != 0)
return (error);
}
return (0);
}
#define ADJFREQ_MAX (500000000LL << 32)
#define ADJFREQ_MIN (-ADJFREQ_MAX)
int
sys_adjfreq(struct proc *p, void *v, register_t *retval)
{
struct sys_adjfreq_args /* {
syscallarg(const int64_t *) freq;
syscallarg(int64_t *) oldfreq;
} */ *uap = v;
int error = 0;
int64_t f, oldf;
const int64_t *freq = SCARG(uap, freq);
int64_t *oldfreq = SCARG(uap, oldfreq);
if (freq) {
if ((error = suser(p)))
return (error);
if ((error = copyin(freq, &f, sizeof(f))))
return (error);
if (f < ADJFREQ_MIN || f > ADJFREQ_MAX)
return (EINVAL);
}
rw_enter(&tc_lock, (freq == NULL) ? RW_READ : RW_WRITE);
if (oldfreq) {
tc_adjfreq(&oldf, NULL);
if ((error = copyout(&oldf, oldfreq, sizeof(oldf))))
goto out;
}
if (freq)
tc_adjfreq(NULL, &f);
out:
rw_exit(&tc_lock);
return (error);
}
int
sys_adjtime(struct proc *p, void *v, register_t *retval)
{
struct sys_adjtime_args /* {
syscallarg(const struct timeval *) delta;
syscallarg(struct timeval *) olddelta;
} */ *uap = v;
struct timeval atv;
const struct timeval *delta = SCARG(uap, delta);
struct timeval *olddelta = SCARG(uap, olddelta);
int64_t adjustment, remaining;
int error;
error = pledge_adjtime(p, delta);
if (error)
return error;
if (delta) {
if ((error = suser(p)))
return (error);
if ((error = copyin(delta, &atv, sizeof(struct timeval))))
return (error);
#ifdef KTRACE
if (KTRPOINT(p, KTR_STRUCT))
ktrreltimeval(p, &atv);
#endif
if (!timerisvalid(&atv))
return (EINVAL);
if (atv.tv_sec > INT64_MAX / 1000000)
return EINVAL;
if (atv.tv_sec < INT64_MIN / 1000000)
return EINVAL;
adjustment = atv.tv_sec * 1000000;
if (adjustment > INT64_MAX - atv.tv_usec)
return EINVAL;
adjustment += atv.tv_usec;
rw_enter_write(&tc_lock);
}
if (olddelta) {
tc_adjtime(&remaining, NULL);
memset(&atv, 0, sizeof(atv));
atv.tv_sec = remaining / 1000000;
atv.tv_usec = remaining % 1000000;
if (atv.tv_usec < 0) {
atv.tv_usec += 1000000;
atv.tv_sec--;
}
if ((error = copyout(&atv, olddelta, sizeof(struct timeval))))
goto out;
}
if (delta)
tc_adjtime(NULL, &adjustment);
out:
if (delta)
rw_exit_write(&tc_lock);
return (error);
}
struct mutex itimer_mtx = MUTEX_INITIALIZER(IPL_CLOCK);
/*
* Get or set value of an interval timer. The process virtual and
* profiling virtual time timers are kept internally in the
* way they are specified externally: in time until they expire.
*
* The real time interval timer's it_value, in contrast, is kept as an
* absolute time rather than as a delta, so that it is easy to keep
* periodic real-time signals from drifting.
*
* Virtual time timers are processed in the hardclock() routine of
* kern_clock.c. The real time timer is processed by a timeout
* routine, called from the softclock() routine. Since a callout
* may be delayed in real time due to interrupt processing in the system,
* it is possible for the real time timeout routine (realitexpire, given below),
* to be delayed in real time past when it is supposed to occur. It
* does not suffice, therefore, to reload the real timer .it_value from the
* real time timers .it_interval. Rather, we compute the next time in
* absolute time the timer should go off.
*/
void
setitimer(int which, const struct itimerval *itv, struct itimerval *olditv)
{
struct itimerspec its, oldits;
struct timespec now;
struct itimerspec *itimer;
struct process *pr;
KASSERT(which >= ITIMER_REAL && which <= ITIMER_PROF);
pr = curproc->p_p;
itimer = &pr->ps_timer[which];
if (itv != NULL) {
TIMEVAL_TO_TIMESPEC(&itv->it_value, &its.it_value);
TIMEVAL_TO_TIMESPEC(&itv->it_interval, &its.it_interval);
}
if (which == ITIMER_REAL) {
mtx_enter(&pr->ps_mtx);
nanouptime(&now);
} else
mtx_enter(&itimer_mtx);
if (olditv != NULL)
oldits = *itimer;
if (itv != NULL) {
if (which == ITIMER_REAL) {
if (timespecisset(&its.it_value)) {
timespecadd(&its.it_value, &now, &its.it_value);
timeout_abs_ts(&pr->ps_realit_to,&its.it_value);
} else
timeout_del(&pr->ps_realit_to);
}
*itimer = its;
if (which == ITIMER_VIRTUAL || which == ITIMER_PROF) {
process_reset_itimer_flag(pr);
need_resched(curcpu());
}
}
if (which == ITIMER_REAL)
mtx_leave(&pr->ps_mtx);
else
mtx_leave(&itimer_mtx);
if (olditv != NULL) {
if (which == ITIMER_REAL && timespecisset(&oldits.it_value)) {
if (timespeccmp(&oldits.it_value, &now, <))
timespecclear(&oldits.it_value);
else {
timespecsub(&oldits.it_value, &now,
&oldits.it_value);
}
}
TIMESPEC_TO_TIMEVAL(&olditv->it_value, &oldits.it_value);
TIMESPEC_TO_TIMEVAL(&olditv->it_interval, &oldits.it_interval);
}
}
void
cancel_all_itimers(void)
{
struct itimerval itv;
int i;
timerclear(&itv.it_value);
timerclear(&itv.it_interval);
for (i = 0; i < nitems(curproc->p_p->ps_timer); i++)
setitimer(i, &itv, NULL);
}
int
sys_getitimer(struct proc *p, void *v, register_t *retval)
{
struct sys_getitimer_args /* {
syscallarg(int) which;
syscallarg(struct itimerval *) itv;
} */ *uap = v;
struct itimerval aitv;
int which;
which = SCARG(uap, which);
if (which < ITIMER_REAL || which > ITIMER_PROF)
return EINVAL;
memset(&aitv, 0, sizeof(aitv));
setitimer(which, NULL, &aitv);
return copyout(&aitv, SCARG(uap, itv), sizeof(aitv));
}
int
sys_setitimer(struct proc *p, void *v, register_t *retval)
{
struct sys_setitimer_args /* {
syscallarg(int) which;
syscallarg(const struct itimerval *) itv;
syscallarg(struct itimerval *) oitv;
} */ *uap = v;
struct itimerval aitv, olditv;
struct itimerval *newitvp, *olditvp;
int error, which;
which = SCARG(uap, which);
if (which < ITIMER_REAL || which > ITIMER_PROF)
return EINVAL;
newitvp = olditvp = NULL;
if (SCARG(uap, itv) != NULL) {
error = copyin(SCARG(uap, itv), &aitv, sizeof(aitv));
if (error)
return error;
error = itimerfix(&aitv);
if (error)
return error;
newitvp = &aitv;
}
if (SCARG(uap, oitv) != NULL) {
memset(&olditv, 0, sizeof(olditv));
olditvp = &olditv;
}
if (newitvp == NULL && olditvp == NULL)
return 0;
setitimer(which, newitvp, olditvp);
if (SCARG(uap, oitv) != NULL)
return copyout(&olditv, SCARG(uap, oitv), sizeof(olditv));
return 0;
}
/*
* Real interval timer expired:
* send process whose timer expired an alarm signal.
* If time is not set up to reload, then just return.
* Else compute next time timer should go off which is > current time.
* This is where delay in processing this timeout causes multiple
* SIGALRM calls to be compressed into one.
*/
void
realitexpire(void *arg)
{
struct timespec cts;
struct process *pr = arg;
struct itimerspec *tp = &pr->ps_timer[ITIMER_REAL];
int need_signal = 0;
mtx_enter(&pr->ps_mtx);
/*
* Do nothing if the timer was cancelled or rescheduled while we
* were entering the mutex.
*/
if (!timespecisset(&tp->it_value) || timeout_pending(&pr->ps_realit_to))
goto out;
/* The timer expired. We need to send the signal. */
need_signal = 1;
/* One-shot timers are not reloaded. */
if (!timespecisset(&tp->it_interval)) {
timespecclear(&tp->it_value);
goto out;
}
/*
* Find the nearest future expiration point and restart
* the timeout.
*/
nanouptime(&cts);
while (timespeccmp(&tp->it_value, &cts, <=))
timespecadd(&tp->it_value, &tp->it_interval, &tp->it_value);
if ((pr->ps_flags & PS_EXITING) == 0)
timeout_abs_ts(&pr->ps_realit_to, &tp->it_value);
out:
mtx_leave(&pr->ps_mtx);
if (need_signal)
prsignal(pr, SIGALRM);
}
/*
* Check if the given setitimer(2) input is valid. Clear it_interval
* if it_value is unset. Round it_interval up to the minimum interval
* if necessary.
*/
int
itimerfix(struct itimerval *itv)
{
static const struct timeval max = { .tv_sec = UINT_MAX, .tv_usec = 0 };
struct timeval min_interval = { .tv_sec = 0, .tv_usec = tick };
if (itv->it_value.tv_sec < 0 || !timerisvalid(&itv->it_value))
return EINVAL;
if (timercmp(&itv->it_value, &max, >))
return EINVAL;
if (itv->it_interval.tv_sec < 0 || !timerisvalid(&itv->it_interval))
return EINVAL;
if (timercmp(&itv->it_interval, &max, >))
return EINVAL;
if (!timerisset(&itv->it_value))
timerclear(&itv->it_interval);
if (timerisset(&itv->it_interval)) {
if (timercmp(&itv->it_interval, &min_interval, <))
itv->it_interval = min_interval;
}
return 0;
}
/*
* Decrement an interval timer by the given duration.
* If the timer expires and it is periodic then reload it. When reloading
* the timer we subtract any overrun from the next period so that the timer
* does not drift.
*/
int
itimerdecr(struct itimerspec *itp, const struct timespec *decrement)
{
timespecsub(&itp->it_value, decrement, &itp->it_value);
if (itp->it_value.tv_sec >= 0 && timespecisset(&itp->it_value))
return (1);
if (!timespecisset(&itp->it_interval)) {
timespecclear(&itp->it_value);
return (0);
}
while (itp->it_value.tv_sec < 0 || !timespecisset(&itp->it_value))
timespecadd(&itp->it_value, &itp->it_interval, &itp->it_value);
return (0);
}
void
itimer_update(struct clockrequest *cr, void *cf, void *arg)
{
struct timespec elapsed;
uint64_t nsecs;
struct clockframe *frame = cf;
struct proc *p = curproc;
struct process *pr;
if (p == NULL || ISSET(p->p_flag, P_SYSTEM | P_WEXIT))
return;
pr = p->p_p;
if (!ISSET(pr->ps_flags, PS_ITIMER))
return;
nsecs = clockrequest_advance(cr, hardclock_period) * hardclock_period;
NSEC_TO_TIMESPEC(nsecs, &elapsed);
mtx_enter(&itimer_mtx);
if (CLKF_USERMODE(frame) &&
timespecisset(&pr->ps_timer[ITIMER_VIRTUAL].it_value) &&
itimerdecr(&pr->ps_timer[ITIMER_VIRTUAL], &elapsed) == 0) {
process_reset_itimer_flag(pr);
atomic_setbits_int(&p->p_flag, P_ALRMPEND);
need_proftick(p);
}
if (timespecisset(&pr->ps_timer[ITIMER_PROF].it_value) &&
itimerdecr(&pr->ps_timer[ITIMER_PROF], &elapsed) == 0) {
process_reset_itimer_flag(pr);
atomic_setbits_int(&p->p_flag, P_PROFPEND);
need_proftick(p);
}
mtx_leave(&itimer_mtx);
}
void
process_reset_itimer_flag(struct process *ps)
{
if (timespecisset(&ps->ps_timer[ITIMER_VIRTUAL].it_value) ||
timespecisset(&ps->ps_timer[ITIMER_PROF].it_value))
atomic_setbits_int(&ps->ps_flags, PS_ITIMER);
else
atomic_clearbits_int(&ps->ps_flags, PS_ITIMER);
}
struct mutex ratecheck_mtx = MUTEX_INITIALIZER(IPL_HIGH);
/*
* ratecheck(): simple time-based rate-limit checking. see ratecheck(9)
* for usage and rationale.
*/
int
ratecheck(struct timeval *lasttime, const struct timeval *mininterval)
{
struct timeval tv, delta;
int rv = 0;
getmicrouptime(&tv);
mtx_enter(&ratecheck_mtx);
timersub(&tv, lasttime, &delta);
/*
* check for 0,0 is so that the message will be seen at least once,
* even if interval is huge.
*/
if (timercmp(&delta, mininterval, >=) ||
(lasttime->tv_sec == 0 && lasttime->tv_usec == 0)) {
*lasttime = tv;
rv = 1;
}
mtx_leave(&ratecheck_mtx);
return (rv);
}
struct mutex ppsratecheck_mtx = MUTEX_INITIALIZER(IPL_HIGH);
/*
* ppsratecheck(): packets (or events) per second limitation.
*/
int
ppsratecheck(struct timeval *lasttime, int *curpps, int maxpps)
{
struct timeval tv, delta;
int rv;
microuptime(&tv);
mtx_enter(&ppsratecheck_mtx);
timersub(&tv, lasttime, &delta);
/*
* check for 0,0 is so that the message will be seen at least once.
* if more than one second have passed since the last update of
* lasttime, reset the counter.
*
* we do increment *curpps even in *curpps < maxpps case, as some may
* try to use *curpps for stat purposes as well.
*/
if (maxpps == 0)
rv = 0;
else if ((lasttime->tv_sec == 0 && lasttime->tv_usec == 0) ||
delta.tv_sec >= 1) {
*lasttime = tv;
*curpps = 0;
rv = 1;
} else if (maxpps < 0)
rv = 1;
else if (*curpps < maxpps)
rv = 1;
else
rv = 0;
/* be careful about wrap-around */
if (*curpps + 1 > *curpps)
*curpps = *curpps + 1;
mtx_leave(&ppsratecheck_mtx);
return (rv);
}
todr_chip_handle_t todr_handle;
int inittodr_done;
#define MINYEAR ((SecBSD / 100) - 1) /* minimum plausible year */
/*
* inittodr:
*
* Initialize time from the time-of-day register.
*/
void
inittodr(time_t base)
{
time_t deltat;
struct timeval rtctime;
struct timespec ts;
int badbase;
inittodr_done = 1;
if (base < (MINYEAR - 1970) * SECYR) {
printf("WARNING: preposterous time in file system\n");
/* read the system clock anyway */
base = (MINYEAR - 1970) * SECYR;
badbase = 1;
} else
badbase = 0;
rtctime.tv_sec = base;
rtctime.tv_usec = 0;
if (todr_handle == NULL ||
todr_gettime(todr_handle, &rtctime) != 0 ||
rtctime.tv_sec < (MINYEAR - 1970) * SECYR) {
/*
* Believe the time in the file system for lack of
* anything better, resetting the TODR.
*/
rtctime.tv_sec = base;
rtctime.tv_usec = 0;
if (todr_handle != NULL && !badbase)
printf("WARNING: bad clock chip time\n");
ts.tv_sec = rtctime.tv_sec;
ts.tv_nsec = rtctime.tv_usec * 1000;
tc_setclock(&ts);
goto bad;
} else {
ts.tv_sec = rtctime.tv_sec;
ts.tv_nsec = rtctime.tv_usec * 1000;
tc_setclock(&ts);
}
if (!badbase) {
/*
* See if we gained/lost two or more days; if
* so, assume something is amiss.
*/
deltat = rtctime.tv_sec - base;
if (deltat < 0)
deltat = -deltat;
if (deltat < 2 * SECDAY)
return; /* all is well */
#ifndef SMALL_KERNEL
printf("WARNING: clock %s %lld days\n",
rtctime.tv_sec < base ? "lost" : "gained",
(long long)(deltat / SECDAY));
#endif
}
bad:
printf("WARNING: CHECK AND RESET THE DATE!\n");
}
/*
* resettodr:
*
* Reset the time-of-day register with the current time.
*/
void
resettodr(void)
{
struct timeval rtctime;
/*
* Skip writing the RTC if inittodr(9) never ran. We don't
* want to overwrite a reasonable value with a nonsense value.
*/
if (!inittodr_done)
return;
microtime(&rtctime);
if (todr_handle != NULL &&
todr_settime(todr_handle, &rtctime) != 0)
printf("WARNING: can't update clock chip time\n");
}
void
todr_attach(struct todr_chip_handle *todr)
{
if (todr_handle == NULL ||
todr->todr_quality > todr_handle->todr_quality)
todr_handle = todr;
}
#define RESETTODR_PERIOD 1800
void periodic_resettodr(void *);
void perform_resettodr(void *);
struct timeout resettodr_to = TIMEOUT_INITIALIZER(periodic_resettodr, NULL);
struct task resettodr_task = TASK_INITIALIZER(perform_resettodr, NULL);
void
periodic_resettodr(void *arg __unused)
{
task_add(systq, &resettodr_task);
}
void
perform_resettodr(void *arg __unused)
{
resettodr();
timeout_add_sec(&resettodr_to, RESETTODR_PERIOD);
}
void
start_periodic_resettodr(void)
{
timeout_add_sec(&resettodr_to, RESETTODR_PERIOD);
}
void
stop_periodic_resettodr(void)
{
timeout_del(&resettodr_to);
task_del(systq, &resettodr_task);
}