3300 lines
91 KiB
C
3300 lines
91 KiB
C
/* $OpenBSD: ieee80211_node.c,v 1.198 2023/10/22 12:01:36 stsp Exp $ */
|
|
/* $NetBSD: ieee80211_node.c,v 1.14 2004/05/09 09:18:47 dyoung Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 2001 Atsushi Onoe
|
|
* Copyright (c) 2002, 2003 Sam Leffler, Errno Consulting
|
|
* Copyright (c) 2008 Damien Bergamini
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include "bridge.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/tree.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_media.h>
|
|
|
|
#include <netinet/in.h>
|
|
#include <netinet/if_ether.h>
|
|
|
|
#if NBRIDGE > 0
|
|
#include <net/if_bridge.h>
|
|
#endif
|
|
|
|
#include <net80211/ieee80211_var.h>
|
|
#include <net80211/ieee80211_priv.h>
|
|
|
|
struct ieee80211_node *ieee80211_node_alloc(struct ieee80211com *);
|
|
void ieee80211_node_free(struct ieee80211com *, struct ieee80211_node *);
|
|
void ieee80211_node_copy(struct ieee80211com *, struct ieee80211_node *,
|
|
const struct ieee80211_node *);
|
|
void ieee80211_choose_rsnparams(struct ieee80211com *);
|
|
u_int8_t ieee80211_node_getrssi(struct ieee80211com *,
|
|
const struct ieee80211_node *);
|
|
int ieee80211_node_checkrssi(struct ieee80211com *,
|
|
const struct ieee80211_node *);
|
|
int ieee80211_ess_is_better(struct ieee80211com *ic, struct ieee80211_node *,
|
|
struct ieee80211_node *);
|
|
void ieee80211_node_set_timeouts(struct ieee80211_node *);
|
|
void ieee80211_setup_node(struct ieee80211com *, struct ieee80211_node *,
|
|
const u_int8_t *);
|
|
struct ieee80211_node *ieee80211_alloc_node_helper(struct ieee80211com *);
|
|
void ieee80211_node_free_unref_cb(struct ieee80211_node *);
|
|
void ieee80211_node_tx_flushed(struct ieee80211com *, struct ieee80211_node *);
|
|
void ieee80211_node_switch_bss(struct ieee80211com *, struct ieee80211_node *);
|
|
void ieee80211_node_addba_request(struct ieee80211_node *, int);
|
|
void ieee80211_node_addba_request_ac_be_to(void *);
|
|
void ieee80211_node_addba_request_ac_bk_to(void *);
|
|
void ieee80211_node_addba_request_ac_vi_to(void *);
|
|
void ieee80211_node_addba_request_ac_vo_to(void *);
|
|
void ieee80211_needs_auth(struct ieee80211com *, struct ieee80211_node *);
|
|
#ifndef IEEE80211_STA_ONLY
|
|
void ieee80211_node_join_ht(struct ieee80211com *, struct ieee80211_node *);
|
|
void ieee80211_node_join_rsn(struct ieee80211com *, struct ieee80211_node *);
|
|
void ieee80211_node_join_11g(struct ieee80211com *, struct ieee80211_node *);
|
|
void ieee80211_node_leave_ht(struct ieee80211com *, struct ieee80211_node *);
|
|
void ieee80211_node_leave_vht(struct ieee80211com *, struct ieee80211_node *);
|
|
void ieee80211_node_leave_rsn(struct ieee80211com *, struct ieee80211_node *);
|
|
void ieee80211_node_leave_11g(struct ieee80211com *, struct ieee80211_node *);
|
|
void ieee80211_node_leave_pwrsave(struct ieee80211com *,
|
|
struct ieee80211_node *);
|
|
void ieee80211_inact_timeout(void *);
|
|
void ieee80211_node_cache_timeout(void *);
|
|
#endif
|
|
void ieee80211_clean_inactive_nodes(struct ieee80211com *, int);
|
|
|
|
#ifndef IEEE80211_STA_ONLY
|
|
void
|
|
ieee80211_inact_timeout(void *arg)
|
|
{
|
|
struct ieee80211com *ic = arg;
|
|
struct ieee80211_node *ni, *next_ni;
|
|
int s;
|
|
|
|
s = splnet();
|
|
for (ni = RBT_MIN(ieee80211_tree, &ic->ic_tree);
|
|
ni != NULL; ni = next_ni) {
|
|
next_ni = RBT_NEXT(ieee80211_tree, ni);
|
|
if (ni->ni_refcnt > 0)
|
|
continue;
|
|
if (ni->ni_inact < IEEE80211_INACT_MAX)
|
|
ni->ni_inact++;
|
|
}
|
|
splx(s);
|
|
|
|
timeout_add_sec(&ic->ic_inact_timeout, IEEE80211_INACT_WAIT);
|
|
}
|
|
|
|
void
|
|
ieee80211_node_cache_timeout(void *arg)
|
|
{
|
|
struct ieee80211com *ic = arg;
|
|
|
|
ieee80211_clean_nodes(ic, 1);
|
|
timeout_add_sec(&ic->ic_node_cache_timeout, IEEE80211_CACHE_WAIT);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* For debug purposes
|
|
*/
|
|
void
|
|
ieee80211_print_ess(struct ieee80211_ess *ess)
|
|
{
|
|
ieee80211_print_essid(ess->essid, ess->esslen);
|
|
if (ess->flags & IEEE80211_F_RSNON) {
|
|
printf(" wpa");
|
|
if (ess->rsnprotos & IEEE80211_PROTO_RSN)
|
|
printf(",wpa2");
|
|
if (ess->rsnprotos & IEEE80211_PROTO_WPA)
|
|
printf(",wpa1");
|
|
|
|
if (ess->rsnakms & IEEE80211_AKM_8021X ||
|
|
ess->rsnakms & IEEE80211_AKM_SHA256_8021X)
|
|
printf(",802.1x");
|
|
printf(" ");
|
|
|
|
if (ess->rsnciphers & IEEE80211_CIPHER_USEGROUP)
|
|
printf(" usegroup");
|
|
if (ess->rsnciphers & IEEE80211_CIPHER_WEP40)
|
|
printf(" wep40");
|
|
if (ess->rsnciphers & IEEE80211_CIPHER_WEP104)
|
|
printf(" wep104");
|
|
if (ess->rsnciphers & IEEE80211_CIPHER_TKIP)
|
|
printf(" tkip");
|
|
if (ess->rsnciphers & IEEE80211_CIPHER_CCMP)
|
|
printf(" ccmp");
|
|
}
|
|
if (ess->flags & IEEE80211_F_WEPON) {
|
|
int i = ess->def_txkey;
|
|
|
|
printf(" wep,");
|
|
if (ess->nw_keys[i].k_cipher & IEEE80211_CIPHER_WEP40)
|
|
printf("wep40");
|
|
if (ess->nw_keys[i].k_cipher & IEEE80211_CIPHER_WEP104)
|
|
printf("wep104");
|
|
}
|
|
if (ess->flags == 0)
|
|
printf(" clear");
|
|
printf("\n");
|
|
}
|
|
|
|
void
|
|
ieee80211_print_ess_list(struct ieee80211com *ic)
|
|
{
|
|
struct ifnet *ifp = &ic->ic_if;
|
|
struct ieee80211_ess *ess;
|
|
|
|
printf("%s: known networks\n", ifp->if_xname);
|
|
TAILQ_FOREACH(ess, &ic->ic_ess, ess_next) {
|
|
ieee80211_print_ess(ess);
|
|
}
|
|
}
|
|
|
|
struct ieee80211_ess *
|
|
ieee80211_get_ess(struct ieee80211com *ic, const char *nwid, int len)
|
|
{
|
|
struct ieee80211_ess *ess;
|
|
|
|
TAILQ_FOREACH(ess, &ic->ic_ess, ess_next) {
|
|
if (len == ess->esslen &&
|
|
memcmp(ess->essid, nwid, ess->esslen) == 0)
|
|
return ess;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
void
|
|
ieee80211_del_ess(struct ieee80211com *ic, char *nwid, int len, int all)
|
|
{
|
|
struct ieee80211_ess *ess, *next;
|
|
|
|
TAILQ_FOREACH_SAFE(ess, &ic->ic_ess, ess_next, next) {
|
|
if (all == 1 || (ess->esslen == len &&
|
|
memcmp(ess->essid, nwid, len) == 0)) {
|
|
TAILQ_REMOVE(&ic->ic_ess, ess, ess_next);
|
|
explicit_bzero(ess, sizeof(*ess));
|
|
free(ess, M_DEVBUF, sizeof(*ess));
|
|
if (TAILQ_EMPTY(&ic->ic_ess))
|
|
ic->ic_flags &= ~IEEE80211_F_AUTO_JOIN;
|
|
if (all != 1)
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Keep in sync with ieee80211_ioctl.c:ieee80211_ioctl_setnwkeys() */
|
|
static int
|
|
ieee80211_ess_setnwkeys(struct ieee80211_ess *ess,
|
|
const struct ieee80211_nwkey *nwkey)
|
|
{
|
|
struct ieee80211_key *k;
|
|
int error, i;
|
|
|
|
if (nwkey->i_wepon == IEEE80211_NWKEY_OPEN) {
|
|
if (!(ess->flags & IEEE80211_F_WEPON))
|
|
return 0;
|
|
ess->flags &= ~IEEE80211_F_WEPON;
|
|
return ENETRESET;
|
|
}
|
|
if (nwkey->i_defkid < 1 || nwkey->i_defkid > IEEE80211_WEP_NKID)
|
|
return EINVAL;
|
|
|
|
for (i = 0; i < IEEE80211_WEP_NKID; i++) {
|
|
if (nwkey->i_key[i].i_keylen == 0 ||
|
|
nwkey->i_key[i].i_keydat == NULL)
|
|
continue; /* entry not set */
|
|
if (nwkey->i_key[i].i_keylen > IEEE80211_KEYBUF_SIZE)
|
|
return EINVAL;
|
|
|
|
/* map wep key to ieee80211_key */
|
|
k = &ess->nw_keys[i];
|
|
memset(k, 0, sizeof(*k));
|
|
if (nwkey->i_key[i].i_keylen <= 5)
|
|
k->k_cipher = IEEE80211_CIPHER_WEP40;
|
|
else
|
|
k->k_cipher = IEEE80211_CIPHER_WEP104;
|
|
k->k_len = ieee80211_cipher_keylen(k->k_cipher);
|
|
k->k_flags = IEEE80211_KEY_GROUP | IEEE80211_KEY_TX;
|
|
error = copyin(nwkey->i_key[i].i_keydat, k->k_key, k->k_len);
|
|
if (error != 0)
|
|
return error;
|
|
}
|
|
ess->def_txkey = nwkey->i_defkid - 1;
|
|
ess->flags |= IEEE80211_F_WEPON;
|
|
|
|
return ENETRESET;
|
|
}
|
|
|
|
|
|
/* Keep in sync with ieee80211_ioctl.c:ieee80211_ioctl_setwpaparms() */
|
|
static int
|
|
ieee80211_ess_setwpaparms(struct ieee80211_ess *ess,
|
|
const struct ieee80211_wpaparams *wpa)
|
|
{
|
|
if (!wpa->i_enabled) {
|
|
if (!(ess->flags & IEEE80211_F_RSNON))
|
|
return 0;
|
|
ess->flags &= ~IEEE80211_F_RSNON;
|
|
ess->rsnprotos = 0;
|
|
ess->rsnakms = 0;
|
|
ess->rsngroupcipher = 0;
|
|
ess->rsnciphers = 0;
|
|
return ENETRESET;
|
|
}
|
|
|
|
ess->rsnprotos = 0;
|
|
if (wpa->i_protos & IEEE80211_WPA_PROTO_WPA1)
|
|
ess->rsnprotos |= IEEE80211_PROTO_WPA;
|
|
if (wpa->i_protos & IEEE80211_WPA_PROTO_WPA2)
|
|
ess->rsnprotos |= IEEE80211_PROTO_RSN;
|
|
if (ess->rsnprotos == 0) /* set to default (RSN) */
|
|
ess->rsnprotos = IEEE80211_PROTO_RSN;
|
|
|
|
ess->rsnakms = 0;
|
|
if (wpa->i_akms & IEEE80211_WPA_AKM_PSK)
|
|
ess->rsnakms |= IEEE80211_AKM_PSK;
|
|
if (wpa->i_akms & IEEE80211_WPA_AKM_SHA256_PSK)
|
|
ess->rsnakms |= IEEE80211_AKM_SHA256_PSK;
|
|
if (wpa->i_akms & IEEE80211_WPA_AKM_8021X)
|
|
ess->rsnakms |= IEEE80211_AKM_8021X;
|
|
if (wpa->i_akms & IEEE80211_WPA_AKM_SHA256_8021X)
|
|
ess->rsnakms |= IEEE80211_AKM_SHA256_8021X;
|
|
if (ess->rsnakms == 0) /* set to default (PSK) */
|
|
ess->rsnakms = IEEE80211_AKM_PSK;
|
|
|
|
if (wpa->i_groupcipher == IEEE80211_WPA_CIPHER_WEP40)
|
|
ess->rsngroupcipher = IEEE80211_CIPHER_WEP40;
|
|
else if (wpa->i_groupcipher == IEEE80211_WPA_CIPHER_TKIP)
|
|
ess->rsngroupcipher = IEEE80211_CIPHER_TKIP;
|
|
else if (wpa->i_groupcipher == IEEE80211_WPA_CIPHER_CCMP)
|
|
ess->rsngroupcipher = IEEE80211_CIPHER_CCMP;
|
|
else if (wpa->i_groupcipher == IEEE80211_WPA_CIPHER_WEP104)
|
|
ess->rsngroupcipher = IEEE80211_CIPHER_WEP104;
|
|
else { /* set to default */
|
|
if (ess->rsnprotos & IEEE80211_PROTO_WPA)
|
|
ess->rsngroupcipher = IEEE80211_CIPHER_TKIP;
|
|
else
|
|
ess->rsngroupcipher = IEEE80211_CIPHER_CCMP;
|
|
}
|
|
|
|
ess->rsnciphers = 0;
|
|
if (wpa->i_ciphers & IEEE80211_WPA_CIPHER_TKIP)
|
|
ess->rsnciphers |= IEEE80211_CIPHER_TKIP;
|
|
if (wpa->i_ciphers & IEEE80211_WPA_CIPHER_CCMP)
|
|
ess->rsnciphers |= IEEE80211_CIPHER_CCMP;
|
|
if (wpa->i_ciphers & IEEE80211_WPA_CIPHER_USEGROUP)
|
|
ess->rsnciphers = IEEE80211_CIPHER_USEGROUP;
|
|
if (ess->rsnciphers == 0) { /* set to default (CCMP, TKIP if WPA1) */
|
|
ess->rsnciphers = IEEE80211_CIPHER_CCMP;
|
|
if (ess->rsnprotos & IEEE80211_PROTO_WPA)
|
|
ess->rsnciphers |= IEEE80211_CIPHER_TKIP;
|
|
}
|
|
|
|
ess->flags |= IEEE80211_F_RSNON;
|
|
|
|
if (ess->rsnakms &
|
|
(IEEE80211_AKM_8021X|IEEE80211_WPA_AKM_SHA256_8021X))
|
|
ess->flags |= IEEE80211_JOIN_8021X;
|
|
|
|
return ENETRESET;
|
|
}
|
|
|
|
static void
|
|
ieee80211_ess_clear_wep(struct ieee80211_ess *ess)
|
|
{
|
|
int i;
|
|
|
|
/* Disable WEP */
|
|
for (i = 0; i < IEEE80211_WEP_NKID; i++) {
|
|
explicit_bzero(&ess->nw_keys[i], sizeof(ess->nw_keys[0]));
|
|
}
|
|
ess->def_txkey = 0;
|
|
ess->flags &= ~IEEE80211_F_WEPON;
|
|
}
|
|
|
|
static void
|
|
ieee80211_ess_clear_wpa(struct ieee80211_ess *ess)
|
|
{
|
|
/* Disable WPA */
|
|
ess->rsnprotos = ess->rsnakms = ess->rsngroupcipher =
|
|
ess->rsnciphers = 0;
|
|
explicit_bzero(ess->psk, sizeof(ess->psk));
|
|
ess->flags &= ~(IEEE80211_F_PSK | IEEE80211_F_RSNON);
|
|
}
|
|
|
|
int
|
|
ieee80211_add_ess(struct ieee80211com *ic, struct ieee80211_join *join)
|
|
{
|
|
struct ieee80211_ess *ess;
|
|
int new = 0, ness = 0;
|
|
|
|
/* only valid for station (aka, client) mode */
|
|
if (ic->ic_opmode != IEEE80211_M_STA)
|
|
return (0);
|
|
|
|
TAILQ_FOREACH(ess, &ic->ic_ess, ess_next) {
|
|
if (ess->esslen == join->i_len &&
|
|
memcmp(ess->essid, join->i_nwid, ess->esslen) == 0)
|
|
break;
|
|
ness++;
|
|
}
|
|
|
|
if (ess == NULL) {
|
|
/* if not found, and wpa/wep are set, then return */
|
|
if ((join->i_flags & IEEE80211_JOIN_WPA) &&
|
|
(join->i_flags & IEEE80211_JOIN_NWKEY)) {
|
|
return (EINVAL);
|
|
}
|
|
if (ness > IEEE80211_CACHE_SIZE)
|
|
return (ERANGE);
|
|
new = 1;
|
|
ess = malloc(sizeof(*ess), M_DEVBUF, M_NOWAIT|M_ZERO);
|
|
if (ess == NULL)
|
|
return (ENOMEM);
|
|
memcpy(ess->essid, join->i_nwid, join->i_len);
|
|
ess->esslen = join->i_len;
|
|
}
|
|
|
|
if (join->i_flags & IEEE80211_JOIN_WPA) {
|
|
if (join->i_wpaparams.i_enabled) {
|
|
if (!(ic->ic_caps & IEEE80211_C_RSN)) {
|
|
free(ess, M_DEVBUF, sizeof(*ess));
|
|
return ENODEV;
|
|
}
|
|
ieee80211_ess_setwpaparms(ess,
|
|
&join->i_wpaparams);
|
|
if (join->i_flags & IEEE80211_JOIN_WPAPSK) {
|
|
ess->flags |= IEEE80211_F_PSK;
|
|
explicit_bzero(ess->psk, sizeof(ess->psk));
|
|
memcpy(ess->psk, &join->i_wpapsk.i_psk,
|
|
sizeof(ess->psk));
|
|
}
|
|
ieee80211_ess_clear_wep(ess);
|
|
} else {
|
|
ieee80211_ess_clear_wpa(ess);
|
|
}
|
|
} else if (join->i_flags & IEEE80211_JOIN_NWKEY) {
|
|
if (join->i_nwkey.i_wepon) {
|
|
if (!(ic->ic_caps & IEEE80211_C_WEP)) {
|
|
free(ess, M_DEVBUF, sizeof(*ess));
|
|
return ENODEV;
|
|
}
|
|
ieee80211_ess_setnwkeys(ess, &join->i_nwkey);
|
|
ieee80211_ess_clear_wpa(ess);
|
|
} else {
|
|
ieee80211_ess_clear_wep(ess);
|
|
}
|
|
}
|
|
|
|
if (new)
|
|
TAILQ_INSERT_TAIL(&ic->ic_ess, ess, ess_next);
|
|
|
|
return (0);
|
|
}
|
|
|
|
uint8_t
|
|
ieee80211_ess_adjust_rssi(struct ieee80211com *ic, struct ieee80211_node *ni)
|
|
{
|
|
uint8_t rssi = ni->ni_rssi;
|
|
|
|
/*
|
|
* Slightly punish 2 GHz RSSI values since they are usually
|
|
* stronger than 5 GHz RSSI values.
|
|
*/
|
|
if (IEEE80211_IS_CHAN_2GHZ(ni->ni_chan)) {
|
|
if (ic->ic_max_rssi) {
|
|
uint8_t p = (5 * ic->ic_max_rssi) / 100;
|
|
if (rssi >= p)
|
|
rssi -= p; /* punish by 5% */
|
|
} else {
|
|
if (rssi >= 8)
|
|
rssi -= 8; /* punish by 8 dBm */
|
|
}
|
|
}
|
|
|
|
return rssi;
|
|
}
|
|
|
|
int
|
|
ieee80211_ess_calculate_score(struct ieee80211com *ic,
|
|
struct ieee80211_node *ni)
|
|
{
|
|
int score = 0;
|
|
uint8_t min_5ghz_rssi;
|
|
|
|
if (ic->ic_max_rssi)
|
|
min_5ghz_rssi = IEEE80211_RSSI_THRES_RATIO_5GHZ;
|
|
else
|
|
min_5ghz_rssi = (uint8_t)IEEE80211_RSSI_THRES_5GHZ;
|
|
|
|
/* not using join any */
|
|
if (ieee80211_get_ess(ic, ni->ni_essid, ni->ni_esslen))
|
|
score += 32;
|
|
|
|
/* Calculate the crypto score */
|
|
if (ni->ni_rsnprotos & IEEE80211_PROTO_RSN)
|
|
score += 16;
|
|
if (ni->ni_rsnprotos & IEEE80211_PROTO_WPA)
|
|
score += 8;
|
|
if (ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY)
|
|
score += 4;
|
|
|
|
/* 5GHz with a good signal */
|
|
if (IEEE80211_IS_CHAN_5GHZ(ni->ni_chan) &&
|
|
ni->ni_rssi > min_5ghz_rssi)
|
|
score += 2;
|
|
|
|
/* HT/VHT available */
|
|
if (ieee80211_node_supports_ht(ni))
|
|
score++;
|
|
if (ieee80211_node_supports_vht(ni))
|
|
score++;
|
|
|
|
/* Boost this AP if it had no auth/assoc failures in the past. */
|
|
if (ni->ni_fails == 0)
|
|
score += 21;
|
|
|
|
return score;
|
|
}
|
|
|
|
/*
|
|
* Given two APs, determine the "better" one of the two.
|
|
* We compute a score based on the following attributes:
|
|
*
|
|
* crypto: wpa2 > wpa1 > wep > open
|
|
* band: 5 GHz > 2 GHz provided 5 GHz rssi is above threshold
|
|
* supported standard revisions: 11ac > 11n > 11a/b/g
|
|
* rssi: rssi1 > rssi2 as a numeric comparison with a slight
|
|
* disadvantage for 2 GHz APs
|
|
*
|
|
* Crypto carries most weight, followed by band, followed by rssi.
|
|
*/
|
|
int
|
|
ieee80211_ess_is_better(struct ieee80211com *ic,
|
|
struct ieee80211_node *nicur, struct ieee80211_node *nican)
|
|
{
|
|
struct ifnet *ifp = &ic->ic_if;
|
|
int score_cur = 0, score_can = 0;
|
|
int cur_rssi, can_rssi;
|
|
|
|
score_cur = ieee80211_ess_calculate_score(ic, nicur);
|
|
score_can = ieee80211_ess_calculate_score(ic, nican);
|
|
|
|
cur_rssi = ieee80211_ess_adjust_rssi(ic, nicur);
|
|
can_rssi = ieee80211_ess_adjust_rssi(ic, nican);
|
|
|
|
if (can_rssi > cur_rssi)
|
|
score_can++;
|
|
|
|
if ((ifp->if_flags & IFF_DEBUG) && (score_can <= score_cur)) {
|
|
printf("%s: AP %s ", ifp->if_xname,
|
|
ether_sprintf(nican->ni_bssid));
|
|
ieee80211_print_essid(nican->ni_essid, nican->ni_esslen);
|
|
printf(" score %d\n", score_can);
|
|
}
|
|
|
|
return score_can > score_cur;
|
|
}
|
|
|
|
/* Determine whether a candidate AP belongs to a given ESS. */
|
|
int
|
|
ieee80211_match_ess(struct ieee80211_ess *ess, struct ieee80211_node *ni)
|
|
{
|
|
if (ess->esslen != 0 &&
|
|
(ess->esslen != ni->ni_esslen ||
|
|
memcmp(ess->essid, ni->ni_essid, ess->esslen) != 0)) {
|
|
ni->ni_assoc_fail |= IEEE80211_NODE_ASSOCFAIL_ESSID;
|
|
return 0;
|
|
}
|
|
|
|
if (ess->flags & (IEEE80211_F_PSK | IEEE80211_F_RSNON)) {
|
|
/* Ensure same WPA version. */
|
|
if ((ni->ni_rsnprotos & IEEE80211_PROTO_RSN) &&
|
|
(ess->rsnprotos & IEEE80211_PROTO_RSN) == 0) {
|
|
ni->ni_assoc_fail |= IEEE80211_NODE_ASSOCFAIL_WPA_PROTO;
|
|
return 0;
|
|
}
|
|
if ((ni->ni_rsnprotos & IEEE80211_PROTO_WPA) &&
|
|
(ess->rsnprotos & IEEE80211_PROTO_WPA) == 0) {
|
|
ni->ni_assoc_fail |= IEEE80211_NODE_ASSOCFAIL_WPA_PROTO;
|
|
return 0;
|
|
}
|
|
} else if (ess->flags & IEEE80211_F_WEPON) {
|
|
if ((ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) == 0) {
|
|
ni->ni_assoc_fail |= IEEE80211_NODE_ASSOCFAIL_PRIVACY;
|
|
return 0;
|
|
}
|
|
} else {
|
|
if ((ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) != 0) {
|
|
ni->ni_assoc_fail |= IEEE80211_NODE_ASSOCFAIL_PRIVACY;
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
if (ess->esslen == 0 &&
|
|
(ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) != 0) {
|
|
ni->ni_assoc_fail |= IEEE80211_NODE_ASSOCFAIL_PRIVACY;
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
void
|
|
ieee80211_switch_ess(struct ieee80211com *ic)
|
|
{
|
|
struct ifnet *ifp = &ic->ic_if;
|
|
struct ieee80211_ess *ess, *seless = NULL;
|
|
struct ieee80211_node *ni, *selni = NULL;
|
|
|
|
if (!ISSET(ifp->if_flags, IFF_RUNNING))
|
|
return;
|
|
|
|
/* Find the best AP matching an entry on our ESS join list. */
|
|
RBT_FOREACH(ni, ieee80211_tree, &ic->ic_tree) {
|
|
if ((ic->ic_flags & IEEE80211_F_DESBSSID) &&
|
|
!IEEE80211_ADDR_EQ(ic->ic_des_bssid, ni->ni_bssid))
|
|
continue;
|
|
|
|
TAILQ_FOREACH(ess, &ic->ic_ess, ess_next) {
|
|
if (ieee80211_match_ess(ess, ni))
|
|
break;
|
|
}
|
|
if (ess == NULL)
|
|
continue;
|
|
|
|
/*
|
|
* Operate only on ic_des_essid if auto-join is disabled.
|
|
* We might have a password stored for this network.
|
|
*/
|
|
if (!ISSET(ic->ic_flags, IEEE80211_F_AUTO_JOIN)) {
|
|
if (ic->ic_des_esslen == ni->ni_esslen &&
|
|
memcmp(ic->ic_des_essid, ni->ni_essid,
|
|
ni->ni_esslen) == 0) {
|
|
ieee80211_set_ess(ic, ess, ni);
|
|
return;
|
|
}
|
|
continue;
|
|
}
|
|
|
|
if (selni == NULL) {
|
|
seless = ess;
|
|
selni = ni;
|
|
continue;
|
|
}
|
|
|
|
if (ieee80211_ess_is_better(ic, selni, ni)) {
|
|
seless = ess;
|
|
selni = ni;
|
|
}
|
|
}
|
|
|
|
if (selni && seless && !(selni->ni_esslen == ic->ic_des_esslen &&
|
|
(memcmp(ic->ic_des_essid, selni->ni_essid,
|
|
IEEE80211_NWID_LEN) == 0))) {
|
|
if (ifp->if_flags & IFF_DEBUG) {
|
|
printf("%s: best AP %s ", ifp->if_xname,
|
|
ether_sprintf(selni->ni_bssid));
|
|
ieee80211_print_essid(selni->ni_essid,
|
|
selni->ni_esslen);
|
|
printf(" score %d\n",
|
|
ieee80211_ess_calculate_score(ic, selni));
|
|
printf("%s: switching to network ", ifp->if_xname);
|
|
ieee80211_print_essid(selni->ni_essid,
|
|
selni->ni_esslen);
|
|
if (seless->esslen == 0)
|
|
printf(" via join any");
|
|
printf("\n");
|
|
|
|
}
|
|
ieee80211_set_ess(ic, seless, selni);
|
|
}
|
|
}
|
|
|
|
void
|
|
ieee80211_set_ess(struct ieee80211com *ic, struct ieee80211_ess *ess,
|
|
struct ieee80211_node *ni)
|
|
{
|
|
memset(ic->ic_des_essid, 0, IEEE80211_NWID_LEN);
|
|
ic->ic_des_esslen = ni->ni_esslen;
|
|
memcpy(ic->ic_des_essid, ni->ni_essid, ic->ic_des_esslen);
|
|
|
|
ieee80211_disable_wep(ic);
|
|
ieee80211_disable_rsn(ic);
|
|
|
|
if (ess->flags & IEEE80211_F_RSNON) {
|
|
explicit_bzero(ic->ic_psk, sizeof(ic->ic_psk));
|
|
memcpy(ic->ic_psk, ess->psk, sizeof(ic->ic_psk));
|
|
|
|
ic->ic_rsnprotos = ess->rsnprotos;
|
|
ic->ic_rsnakms = ess->rsnakms;
|
|
ic->ic_rsngroupcipher = ess->rsngroupcipher;
|
|
ic->ic_rsnciphers = ess->rsnciphers;
|
|
ic->ic_flags |= IEEE80211_F_RSNON;
|
|
if (ess->flags & IEEE80211_F_PSK)
|
|
ic->ic_flags |= IEEE80211_F_PSK;
|
|
} else if (ess->flags & IEEE80211_F_WEPON) {
|
|
struct ieee80211_key *k;
|
|
int i;
|
|
|
|
for (i = 0; i < IEEE80211_WEP_NKID; i++) {
|
|
k = &ic->ic_nw_keys[i];
|
|
if (k->k_cipher != IEEE80211_CIPHER_NONE)
|
|
(*ic->ic_delete_key)(ic, NULL, k);
|
|
memcpy(&ic->ic_nw_keys[i], &ess->nw_keys[i],
|
|
sizeof(struct ieee80211_key));
|
|
if (k->k_cipher != IEEE80211_CIPHER_NONE)
|
|
(*ic->ic_set_key)(ic, NULL, k);
|
|
}
|
|
ic->ic_def_txkey = ess->def_txkey;
|
|
ic->ic_flags |= IEEE80211_F_WEPON;
|
|
}
|
|
}
|
|
|
|
void
|
|
ieee80211_deselect_ess(struct ieee80211com *ic)
|
|
{
|
|
memset(ic->ic_des_essid, 0, IEEE80211_NWID_LEN);
|
|
ic->ic_des_esslen = 0;
|
|
ieee80211_disable_wep(ic);
|
|
ieee80211_disable_rsn(ic);
|
|
}
|
|
|
|
void
|
|
ieee80211_node_attach(struct ifnet *ifp)
|
|
{
|
|
struct ieee80211com *ic = (void *)ifp;
|
|
#ifndef IEEE80211_STA_ONLY
|
|
int size;
|
|
#endif
|
|
|
|
RBT_INIT(ieee80211_tree, &ic->ic_tree);
|
|
ic->ic_node_alloc = ieee80211_node_alloc;
|
|
ic->ic_node_free = ieee80211_node_free;
|
|
ic->ic_node_copy = ieee80211_node_copy;
|
|
ic->ic_node_getrssi = ieee80211_node_getrssi;
|
|
ic->ic_node_checkrssi = ieee80211_node_checkrssi;
|
|
ic->ic_scangen = 1;
|
|
ic->ic_max_nnodes = ieee80211_cache_size;
|
|
|
|
if (ic->ic_max_aid == 0)
|
|
ic->ic_max_aid = IEEE80211_AID_DEF;
|
|
else if (ic->ic_max_aid > IEEE80211_AID_MAX)
|
|
ic->ic_max_aid = IEEE80211_AID_MAX;
|
|
#ifndef IEEE80211_STA_ONLY
|
|
size = howmany(ic->ic_max_aid, 32) * sizeof(u_int32_t);
|
|
ic->ic_aid_bitmap = malloc(size, M_DEVBUF, M_NOWAIT | M_ZERO);
|
|
if (ic->ic_aid_bitmap == NULL) {
|
|
/* XXX no way to recover */
|
|
printf("%s: no memory for AID bitmap!\n", __func__);
|
|
ic->ic_max_aid = 0;
|
|
}
|
|
if (ic->ic_caps & (IEEE80211_C_HOSTAP | IEEE80211_C_IBSS)) {
|
|
ic->ic_tim_len = howmany(ic->ic_max_aid, 8);
|
|
ic->ic_tim_bitmap = malloc(ic->ic_tim_len, M_DEVBUF,
|
|
M_NOWAIT | M_ZERO);
|
|
if (ic->ic_tim_bitmap == NULL) {
|
|
printf("%s: no memory for TIM bitmap!\n", __func__);
|
|
ic->ic_tim_len = 0;
|
|
} else
|
|
ic->ic_set_tim = ieee80211_set_tim;
|
|
timeout_set(&ic->ic_rsn_timeout,
|
|
ieee80211_gtk_rekey_timeout, ic);
|
|
timeout_set(&ic->ic_inact_timeout,
|
|
ieee80211_inact_timeout, ic);
|
|
timeout_set(&ic->ic_node_cache_timeout,
|
|
ieee80211_node_cache_timeout, ic);
|
|
}
|
|
#endif
|
|
TAILQ_INIT(&ic->ic_ess);
|
|
}
|
|
|
|
struct ieee80211_node *
|
|
ieee80211_alloc_node_helper(struct ieee80211com *ic)
|
|
{
|
|
struct ieee80211_node *ni;
|
|
if (ic->ic_nnodes >= ic->ic_max_nnodes)
|
|
ieee80211_clean_nodes(ic, 0);
|
|
if (ic->ic_nnodes >= ic->ic_max_nnodes)
|
|
return NULL;
|
|
ni = (*ic->ic_node_alloc)(ic);
|
|
return ni;
|
|
}
|
|
|
|
void
|
|
ieee80211_node_lateattach(struct ifnet *ifp)
|
|
{
|
|
struct ieee80211com *ic = (void *)ifp;
|
|
struct ieee80211_node *ni;
|
|
|
|
ni = ieee80211_alloc_node_helper(ic);
|
|
if (ni == NULL)
|
|
panic("unable to setup initial BSS node");
|
|
ni->ni_chan = IEEE80211_CHAN_ANYC;
|
|
ic->ic_bss = ieee80211_ref_node(ni);
|
|
ic->ic_txpower = IEEE80211_TXPOWER_MAX;
|
|
#ifndef IEEE80211_STA_ONLY
|
|
mq_init(&ni->ni_savedq, IEEE80211_PS_MAX_QUEUE, IPL_NET);
|
|
#endif
|
|
}
|
|
|
|
void
|
|
ieee80211_node_detach(struct ifnet *ifp)
|
|
{
|
|
struct ieee80211com *ic = (void *)ifp;
|
|
|
|
if (ic->ic_bss != NULL) {
|
|
(*ic->ic_node_free)(ic, ic->ic_bss);
|
|
ic->ic_bss = NULL;
|
|
}
|
|
ieee80211_del_ess(ic, NULL, 0, 1);
|
|
ieee80211_free_allnodes(ic, 1);
|
|
#ifndef IEEE80211_STA_ONLY
|
|
free(ic->ic_aid_bitmap, M_DEVBUF,
|
|
howmany(ic->ic_max_aid, 32) * sizeof(u_int32_t));
|
|
free(ic->ic_tim_bitmap, M_DEVBUF, ic->ic_tim_len);
|
|
timeout_del(&ic->ic_inact_timeout);
|
|
timeout_del(&ic->ic_node_cache_timeout);
|
|
timeout_del(&ic->ic_tkip_micfail_timeout);
|
|
#endif
|
|
timeout_del(&ic->ic_rsn_timeout);
|
|
}
|
|
|
|
/*
|
|
* AP scanning support.
|
|
*/
|
|
|
|
/*
|
|
* Initialize the active channel set based on the set
|
|
* of available channels and the current PHY mode.
|
|
*/
|
|
void
|
|
ieee80211_reset_scan(struct ifnet *ifp)
|
|
{
|
|
struct ieee80211com *ic = (void *)ifp;
|
|
|
|
memcpy(ic->ic_chan_scan, ic->ic_chan_active,
|
|
sizeof(ic->ic_chan_active));
|
|
/* NB: hack, setup so next_scan starts with the first channel */
|
|
if (ic->ic_bss != NULL && ic->ic_bss->ni_chan == IEEE80211_CHAN_ANYC)
|
|
ic->ic_bss->ni_chan = &ic->ic_channels[IEEE80211_CHAN_MAX];
|
|
}
|
|
|
|
/*
|
|
* Increase a node's inactivity counter.
|
|
* This counter get reset to zero if a frame is received.
|
|
* This function is intended for station mode only.
|
|
* See ieee80211_node_cache_timeout() for hostap mode.
|
|
*/
|
|
void
|
|
ieee80211_node_raise_inact(void *arg, struct ieee80211_node *ni)
|
|
{
|
|
if (ni->ni_refcnt == 0 && ni->ni_inact < IEEE80211_INACT_SCAN)
|
|
ni->ni_inact++;
|
|
}
|
|
|
|
/*
|
|
* Begin an active scan.
|
|
*/
|
|
void
|
|
ieee80211_begin_scan(struct ifnet *ifp)
|
|
{
|
|
struct ieee80211com *ic = (void *)ifp;
|
|
|
|
/*
|
|
* In all but hostap mode scanning starts off in
|
|
* an active mode before switching to passive.
|
|
*/
|
|
#ifndef IEEE80211_STA_ONLY
|
|
if (ic->ic_opmode != IEEE80211_M_HOSTAP)
|
|
#endif
|
|
{
|
|
ic->ic_flags |= IEEE80211_F_ASCAN;
|
|
ic->ic_stats.is_scan_active++;
|
|
}
|
|
#ifndef IEEE80211_STA_ONLY
|
|
else
|
|
ic->ic_stats.is_scan_passive++;
|
|
#endif
|
|
if (ifp->if_flags & IFF_DEBUG)
|
|
printf("%s: begin %s scan\n", ifp->if_xname,
|
|
(ic->ic_flags & IEEE80211_F_ASCAN) ?
|
|
"active" : "passive");
|
|
|
|
|
|
if (ic->ic_opmode == IEEE80211_M_STA) {
|
|
ieee80211_node_cleanup(ic, ic->ic_bss);
|
|
ieee80211_iterate_nodes(ic, ieee80211_node_raise_inact, NULL);
|
|
}
|
|
|
|
/*
|
|
* Reset the current mode. Setting the current mode will also
|
|
* reset scan state.
|
|
*/
|
|
if (IFM_MODE(ic->ic_media.ifm_cur->ifm_media) == IFM_AUTO)
|
|
ic->ic_curmode = IEEE80211_MODE_AUTO;
|
|
ieee80211_setmode(ic, ic->ic_curmode);
|
|
|
|
ic->ic_scan_count = 0;
|
|
|
|
/* Scan the next channel. */
|
|
ieee80211_next_scan(ifp);
|
|
}
|
|
|
|
/*
|
|
* Switch to the next channel marked for scanning.
|
|
*/
|
|
void
|
|
ieee80211_next_scan(struct ifnet *ifp)
|
|
{
|
|
struct ieee80211com *ic = (void *)ifp;
|
|
struct ieee80211_channel *chan;
|
|
|
|
chan = ic->ic_bss->ni_chan;
|
|
for (;;) {
|
|
if (++chan > &ic->ic_channels[IEEE80211_CHAN_MAX])
|
|
chan = &ic->ic_channels[0];
|
|
if (isset(ic->ic_chan_scan, ieee80211_chan2ieee(ic, chan))) {
|
|
/*
|
|
* Ignore channels marked passive-only
|
|
* during an active scan.
|
|
*/
|
|
if ((ic->ic_flags & IEEE80211_F_ASCAN) == 0 ||
|
|
(chan->ic_flags & IEEE80211_CHAN_PASSIVE) == 0)
|
|
break;
|
|
}
|
|
if (chan == ic->ic_bss->ni_chan) {
|
|
ieee80211_end_scan(ifp);
|
|
return;
|
|
}
|
|
}
|
|
clrbit(ic->ic_chan_scan, ieee80211_chan2ieee(ic, chan));
|
|
DPRINTF(("chan %d->%d\n",
|
|
ieee80211_chan2ieee(ic, ic->ic_bss->ni_chan),
|
|
ieee80211_chan2ieee(ic, chan)));
|
|
ic->ic_bss->ni_chan = chan;
|
|
ieee80211_new_state(ic, IEEE80211_S_SCAN, -1);
|
|
}
|
|
|
|
#ifndef IEEE80211_STA_ONLY
|
|
void
|
|
ieee80211_create_ibss(struct ieee80211com* ic, struct ieee80211_channel *chan)
|
|
{
|
|
enum ieee80211_phymode mode;
|
|
struct ieee80211_node *ni;
|
|
struct ifnet *ifp = &ic->ic_if;
|
|
|
|
ni = ic->ic_bss;
|
|
if (ifp->if_flags & IFF_DEBUG)
|
|
printf("%s: creating ibss\n", ifp->if_xname);
|
|
ic->ic_flags |= IEEE80211_F_SIBSS;
|
|
ni->ni_chan = chan;
|
|
if ((ic->ic_flags & IEEE80211_F_VHTON) && IEEE80211_IS_CHAN_5GHZ(chan))
|
|
mode = IEEE80211_MODE_11AC;
|
|
else if (ic->ic_flags & IEEE80211_F_HTON)
|
|
mode = IEEE80211_MODE_11N;
|
|
else
|
|
mode = ieee80211_chan2mode(ic, ni->ni_chan);
|
|
ieee80211_setmode(ic, mode);
|
|
/* Pick an appropriate mode for supported legacy rates. */
|
|
if (ic->ic_curmode == IEEE80211_MODE_11AC) {
|
|
mode = IEEE80211_MODE_11A;
|
|
} else if (ic->ic_curmode == IEEE80211_MODE_11N) {
|
|
if (IEEE80211_IS_CHAN_5GHZ(chan))
|
|
mode = IEEE80211_MODE_11A;
|
|
else
|
|
mode = IEEE80211_MODE_11G;
|
|
} else {
|
|
mode = ic->ic_curmode;
|
|
}
|
|
ni->ni_rates = ic->ic_sup_rates[mode];
|
|
ni->ni_txrate = 0;
|
|
IEEE80211_ADDR_COPY(ni->ni_macaddr, ic->ic_myaddr);
|
|
IEEE80211_ADDR_COPY(ni->ni_bssid, ic->ic_myaddr);
|
|
if (ic->ic_opmode == IEEE80211_M_IBSS) {
|
|
if ((ic->ic_flags & IEEE80211_F_DESBSSID) != 0)
|
|
IEEE80211_ADDR_COPY(ni->ni_bssid, ic->ic_des_bssid);
|
|
else
|
|
ni->ni_bssid[0] |= 0x02; /* local bit for IBSS */
|
|
}
|
|
ni->ni_esslen = ic->ic_des_esslen;
|
|
memcpy(ni->ni_essid, ic->ic_des_essid, ni->ni_esslen);
|
|
ni->ni_rssi = 0;
|
|
ni->ni_rstamp = 0;
|
|
memset(ni->ni_tstamp, 0, sizeof(ni->ni_tstamp));
|
|
ni->ni_intval = ic->ic_lintval;
|
|
ni->ni_capinfo = IEEE80211_CAPINFO_IBSS;
|
|
if (ic->ic_flags & IEEE80211_F_WEPON)
|
|
ni->ni_capinfo |= IEEE80211_CAPINFO_PRIVACY;
|
|
if (ic->ic_flags & IEEE80211_F_HTON) {
|
|
const struct ieee80211_edca_ac_params *ac_qap;
|
|
struct ieee80211_edca_ac_params *ac;
|
|
int aci;
|
|
|
|
/*
|
|
* Configure HT protection. This will be updated later
|
|
* based on the number of non-HT nodes in the node cache.
|
|
*/
|
|
ic->ic_protmode = IEEE80211_PROT_NONE;
|
|
ni->ni_htop1 = IEEE80211_HTPROT_NONE;
|
|
/* Disallow Greenfield mode. None of our drivers support it. */
|
|
ni->ni_htop1 |= IEEE80211_HTOP1_NONGF_STA;
|
|
if (ic->ic_updateprot)
|
|
ic->ic_updateprot(ic);
|
|
|
|
/* Configure QoS EDCA parameters. */
|
|
for (aci = 0; aci < EDCA_NUM_AC; aci++) {
|
|
ac = &ic->ic_edca_ac[aci];
|
|
ac_qap = &ieee80211_qap_edca_table[ic->ic_curmode][aci];
|
|
ac->ac_acm = ac_qap->ac_acm;
|
|
ac->ac_aifsn = ac_qap->ac_aifsn;
|
|
ac->ac_ecwmin = ac_qap->ac_ecwmin;
|
|
ac->ac_ecwmax = ac_qap->ac_ecwmax;
|
|
ac->ac_txoplimit = ac_qap->ac_txoplimit;
|
|
}
|
|
if (ic->ic_updateedca)
|
|
(*ic->ic_updateedca)(ic);
|
|
}
|
|
if (ic->ic_flags & IEEE80211_F_RSNON) {
|
|
struct ieee80211_key *k;
|
|
|
|
/* initialize 256-bit global key counter to a random value */
|
|
arc4random_buf(ic->ic_globalcnt, EAPOL_KEY_NONCE_LEN);
|
|
|
|
ni->ni_rsnprotos = ic->ic_rsnprotos;
|
|
ni->ni_rsnakms = ic->ic_rsnakms;
|
|
ni->ni_rsnciphers = ic->ic_rsnciphers;
|
|
ni->ni_rsngroupcipher = ic->ic_rsngroupcipher;
|
|
ni->ni_rsngroupmgmtcipher = ic->ic_rsngroupmgmtcipher;
|
|
ni->ni_rsncaps = 0;
|
|
if (ic->ic_caps & IEEE80211_C_MFP) {
|
|
ni->ni_rsncaps |= IEEE80211_RSNCAP_MFPC;
|
|
if (ic->ic_flags & IEEE80211_F_MFPR)
|
|
ni->ni_rsncaps |= IEEE80211_RSNCAP_MFPR;
|
|
}
|
|
|
|
ic->ic_def_txkey = 1;
|
|
ic->ic_flags &= ~IEEE80211_F_COUNTERM;
|
|
k = &ic->ic_nw_keys[ic->ic_def_txkey];
|
|
memset(k, 0, sizeof(*k));
|
|
k->k_id = ic->ic_def_txkey;
|
|
k->k_cipher = ni->ni_rsngroupcipher;
|
|
k->k_flags = IEEE80211_KEY_GROUP | IEEE80211_KEY_TX;
|
|
k->k_len = ieee80211_cipher_keylen(k->k_cipher);
|
|
arc4random_buf(k->k_key, k->k_len);
|
|
(*ic->ic_set_key)(ic, ni, k); /* XXX */
|
|
|
|
if (ic->ic_caps & IEEE80211_C_MFP) {
|
|
ic->ic_igtk_kid = 4;
|
|
k = &ic->ic_nw_keys[ic->ic_igtk_kid];
|
|
memset(k, 0, sizeof(*k));
|
|
k->k_id = ic->ic_igtk_kid;
|
|
k->k_cipher = ni->ni_rsngroupmgmtcipher;
|
|
k->k_flags = IEEE80211_KEY_IGTK | IEEE80211_KEY_TX;
|
|
k->k_len = 16;
|
|
arc4random_buf(k->k_key, k->k_len);
|
|
(*ic->ic_set_key)(ic, ni, k); /* XXX */
|
|
}
|
|
/*
|
|
* In HostAP mode, multicast traffic is sent using ic_bss
|
|
* as the Tx node, so mark our node as valid so we can send
|
|
* multicast frames using the group key we've just configured.
|
|
*/
|
|
ni->ni_port_valid = 1;
|
|
ni->ni_flags |= IEEE80211_NODE_TXPROT;
|
|
|
|
/* schedule a GTK/IGTK rekeying after 3600s */
|
|
timeout_add_sec(&ic->ic_rsn_timeout, 3600);
|
|
}
|
|
timeout_add_sec(&ic->ic_inact_timeout, IEEE80211_INACT_WAIT);
|
|
timeout_add_sec(&ic->ic_node_cache_timeout, IEEE80211_CACHE_WAIT);
|
|
ieee80211_new_state(ic, IEEE80211_S_RUN, -1);
|
|
}
|
|
#endif /* IEEE80211_STA_ONLY */
|
|
|
|
int
|
|
ieee80211_match_bss(struct ieee80211com *ic, struct ieee80211_node *ni,
|
|
int bgscan)
|
|
{
|
|
u_int8_t rate;
|
|
int fail;
|
|
|
|
fail = 0;
|
|
if ((ic->ic_flags & IEEE80211_F_BGSCAN) == 0 &&
|
|
isclr(ic->ic_chan_active, ieee80211_chan2ieee(ic, ni->ni_chan)))
|
|
fail |= IEEE80211_NODE_ASSOCFAIL_CHAN;
|
|
if (ic->ic_des_chan != IEEE80211_CHAN_ANYC &&
|
|
ni->ni_chan != ic->ic_des_chan)
|
|
fail |= IEEE80211_NODE_ASSOCFAIL_CHAN;
|
|
#ifndef IEEE80211_STA_ONLY
|
|
if (ic->ic_opmode == IEEE80211_M_IBSS) {
|
|
if ((ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) == 0)
|
|
fail |= IEEE80211_NODE_ASSOCFAIL_IBSS;
|
|
} else
|
|
#endif
|
|
{
|
|
if ((ni->ni_capinfo & IEEE80211_CAPINFO_ESS) == 0)
|
|
fail |= IEEE80211_NODE_ASSOCFAIL_IBSS;
|
|
}
|
|
if (ic->ic_flags & (IEEE80211_F_WEPON | IEEE80211_F_RSNON)) {
|
|
if ((ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) == 0)
|
|
fail |= IEEE80211_NODE_ASSOCFAIL_PRIVACY;
|
|
} else {
|
|
if (ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY)
|
|
fail |= IEEE80211_NODE_ASSOCFAIL_PRIVACY;
|
|
}
|
|
|
|
rate = ieee80211_fix_rate(ic, ni, IEEE80211_F_DONEGO);
|
|
if (rate & IEEE80211_RATE_BASIC)
|
|
fail |= IEEE80211_NODE_ASSOCFAIL_BASIC_RATE;
|
|
if (ic->ic_des_esslen == 0)
|
|
fail |= IEEE80211_NODE_ASSOCFAIL_ESSID;
|
|
if (ic->ic_des_esslen != 0 &&
|
|
(ni->ni_esslen != ic->ic_des_esslen ||
|
|
memcmp(ni->ni_essid, ic->ic_des_essid, ic->ic_des_esslen) != 0))
|
|
fail |= IEEE80211_NODE_ASSOCFAIL_ESSID;
|
|
if ((ic->ic_flags & IEEE80211_F_DESBSSID) &&
|
|
!IEEE80211_ADDR_EQ(ic->ic_des_bssid, ni->ni_bssid))
|
|
fail |= IEEE80211_NODE_ASSOCFAIL_BSSID;
|
|
|
|
if (ic->ic_flags & IEEE80211_F_RSNON) {
|
|
/*
|
|
* If at least one RSN IE field from the AP's RSN IE fails
|
|
* to overlap with any value the STA supports, the STA shall
|
|
* decline to associate with that AP.
|
|
*/
|
|
if ((ni->ni_rsnprotos & ic->ic_rsnprotos) == 0)
|
|
fail |= IEEE80211_NODE_ASSOCFAIL_WPA_PROTO;
|
|
if ((ni->ni_rsnakms & ic->ic_rsnakms) == 0)
|
|
fail |= IEEE80211_NODE_ASSOCFAIL_WPA_PROTO;
|
|
if ((ni->ni_rsnakms & ic->ic_rsnakms &
|
|
~(IEEE80211_AKM_PSK | IEEE80211_AKM_SHA256_PSK)) == 0) {
|
|
/* AP only supports PSK AKMPs */
|
|
if (!(ic->ic_flags & IEEE80211_F_PSK))
|
|
fail |= IEEE80211_NODE_ASSOCFAIL_WPA_PROTO;
|
|
}
|
|
if (ni->ni_rsngroupcipher != IEEE80211_CIPHER_WEP40 &&
|
|
ni->ni_rsngroupcipher != IEEE80211_CIPHER_TKIP &&
|
|
ni->ni_rsngroupcipher != IEEE80211_CIPHER_CCMP &&
|
|
ni->ni_rsngroupcipher != IEEE80211_CIPHER_WEP104)
|
|
fail |= IEEE80211_NODE_ASSOCFAIL_WPA_PROTO;
|
|
if ((ni->ni_rsnciphers & ic->ic_rsnciphers) == 0)
|
|
fail |= IEEE80211_NODE_ASSOCFAIL_WPA_PROTO;
|
|
|
|
/* we only support BIP as the IGTK cipher */
|
|
if ((ni->ni_rsncaps & IEEE80211_RSNCAP_MFPC) &&
|
|
ni->ni_rsngroupmgmtcipher != IEEE80211_CIPHER_BIP)
|
|
fail |= IEEE80211_NODE_ASSOCFAIL_WPA_PROTO;
|
|
|
|
/* we do not support MFP but AP requires it */
|
|
if (!(ic->ic_caps & IEEE80211_C_MFP) &&
|
|
(ni->ni_rsncaps & IEEE80211_RSNCAP_MFPR))
|
|
fail |= IEEE80211_NODE_ASSOCFAIL_WPA_PROTO;
|
|
|
|
/* we require MFP but AP does not support it */
|
|
if ((ic->ic_caps & IEEE80211_C_MFP) &&
|
|
(ic->ic_flags & IEEE80211_F_MFPR) &&
|
|
!(ni->ni_rsncaps & IEEE80211_RSNCAP_MFPC))
|
|
fail |= IEEE80211_NODE_ASSOCFAIL_WPA_PROTO;
|
|
}
|
|
|
|
if (ic->ic_if.if_flags & IFF_DEBUG) {
|
|
printf("%s: %c %s%c", ic->ic_if.if_xname, fail ? '-' : '+',
|
|
ether_sprintf(ni->ni_bssid),
|
|
fail & IEEE80211_NODE_ASSOCFAIL_BSSID ? '!' : ' ');
|
|
printf(" %3d%c", ieee80211_chan2ieee(ic, ni->ni_chan),
|
|
fail & IEEE80211_NODE_ASSOCFAIL_CHAN ? '!' : ' ');
|
|
printf(" %+4d", ni->ni_rssi);
|
|
printf(" %2dM%c", (rate & IEEE80211_RATE_VAL) / 2,
|
|
fail & IEEE80211_NODE_ASSOCFAIL_BASIC_RATE ? '!' : ' ');
|
|
printf(" %4s%c",
|
|
(ni->ni_capinfo & IEEE80211_CAPINFO_ESS) ? "ess" :
|
|
(ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) ? "ibss" :
|
|
"????",
|
|
fail & IEEE80211_NODE_ASSOCFAIL_IBSS ? '!' : ' ');
|
|
printf(" %7s%c ",
|
|
(ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) ?
|
|
"privacy" : "no",
|
|
fail & IEEE80211_NODE_ASSOCFAIL_PRIVACY ? '!' : ' ');
|
|
printf(" %3s%c ",
|
|
(ic->ic_flags & IEEE80211_F_RSNON) ?
|
|
"rsn" : "no",
|
|
fail & IEEE80211_NODE_ASSOCFAIL_WPA_PROTO ? '!' : ' ');
|
|
ieee80211_print_essid(ni->ni_essid, ni->ni_esslen);
|
|
printf("%s\n",
|
|
fail & IEEE80211_NODE_ASSOCFAIL_ESSID ? "!" : "");
|
|
}
|
|
|
|
/* We don't care about unrelated networks during background scans. */
|
|
if (bgscan) {
|
|
if ((fail & IEEE80211_NODE_ASSOCFAIL_ESSID) == 0)
|
|
ni->ni_assoc_fail = fail;
|
|
} else
|
|
ni->ni_assoc_fail = fail;
|
|
if ((fail & IEEE80211_NODE_ASSOCFAIL_ESSID) == 0)
|
|
ic->ic_bss->ni_assoc_fail = ni->ni_assoc_fail;
|
|
|
|
return fail;
|
|
}
|
|
|
|
struct ieee80211_node_switch_bss_arg {
|
|
u_int8_t cur_macaddr[IEEE80211_ADDR_LEN];
|
|
u_int8_t sel_macaddr[IEEE80211_ADDR_LEN];
|
|
};
|
|
|
|
void
|
|
ieee80211_node_free_unref_cb(struct ieee80211_node *ni)
|
|
{
|
|
free(ni->ni_unref_arg, M_DEVBUF, ni->ni_unref_arg_size);
|
|
|
|
/* Guard against accidental reuse. */
|
|
ni->ni_unref_cb = NULL;
|
|
ni->ni_unref_arg = NULL;
|
|
ni->ni_unref_arg_size = 0;
|
|
}
|
|
|
|
/* Implements ni->ni_unref_cb(). */
|
|
void
|
|
ieee80211_node_tx_stopped(struct ieee80211com *ic,
|
|
struct ieee80211_node *ni)
|
|
{
|
|
splassert(IPL_NET);
|
|
|
|
if ((ic->ic_flags & IEEE80211_F_BGSCAN) == 0)
|
|
return;
|
|
|
|
/*
|
|
* Install a callback which will switch us to the new AP once
|
|
* the de-auth frame has been processed by hardware.
|
|
* Pass on the existing ni->ni_unref_arg argument.
|
|
*/
|
|
ic->ic_bss->ni_unref_cb = ieee80211_node_switch_bss;
|
|
|
|
/*
|
|
* All data frames queued to hardware have been flushed and
|
|
* A-MPDU Tx has been stopped. We are now going to switch APs.
|
|
* Queue a de-auth frame addressed at our current AP.
|
|
*/
|
|
if (IEEE80211_SEND_MGMT(ic, ic->ic_bss,
|
|
IEEE80211_FC0_SUBTYPE_DEAUTH,
|
|
IEEE80211_REASON_AUTH_LEAVE) != 0) {
|
|
ic->ic_flags &= ~IEEE80211_F_BGSCAN;
|
|
ieee80211_node_free_unref_cb(ni);
|
|
ieee80211_new_state(ic, IEEE80211_S_SCAN, -1);
|
|
return;
|
|
}
|
|
|
|
/* F_BGSCAN flag gets cleared in ieee80211_node_join_bss(). */
|
|
}
|
|
|
|
/* Implements ni->ni_unref_cb(). */
|
|
void
|
|
ieee80211_node_tx_flushed(struct ieee80211com *ic, struct ieee80211_node *ni)
|
|
{
|
|
splassert(IPL_NET);
|
|
|
|
if ((ic->ic_flags & IEEE80211_F_BGSCAN) == 0)
|
|
return;
|
|
|
|
/* All data frames queued to hardware have been flushed. */
|
|
if (ic->ic_caps & IEEE80211_C_TX_AMPDU) {
|
|
/*
|
|
* Install a callback which will switch us to the
|
|
* new AP once Tx agg sessions have been stopped,
|
|
* which involves sending a DELBA frame.
|
|
* Pass on the existing ni->ni_unref_arg argument.
|
|
*/
|
|
ic->ic_bss->ni_unref_cb = ieee80211_node_tx_stopped;
|
|
ieee80211_stop_ampdu_tx(ic, ic->ic_bss,
|
|
IEEE80211_FC0_SUBTYPE_DEAUTH);
|
|
} else
|
|
ieee80211_node_tx_stopped(ic, ni);
|
|
}
|
|
|
|
/* Implements ni->ni_unref_cb(). */
|
|
void
|
|
ieee80211_node_switch_bss(struct ieee80211com *ic, struct ieee80211_node *ni)
|
|
{
|
|
struct ifnet *ifp = &ic->ic_if;
|
|
struct ieee80211_node_switch_bss_arg *sba = ni->ni_unref_arg;
|
|
struct ieee80211_node *curbs, *selbs;
|
|
|
|
splassert(IPL_NET);
|
|
|
|
if ((ic->ic_flags & IEEE80211_F_BGSCAN) == 0)
|
|
return;
|
|
|
|
ic->ic_xflags &= ~IEEE80211_F_TX_MGMT_ONLY;
|
|
|
|
selbs = ieee80211_find_node(ic, sba->sel_macaddr);
|
|
if (selbs == NULL) {
|
|
ieee80211_node_free_unref_cb(ni);
|
|
ic->ic_flags &= ~IEEE80211_F_BGSCAN;
|
|
ieee80211_new_state(ic, IEEE80211_S_SCAN, -1);
|
|
return;
|
|
}
|
|
|
|
curbs = ieee80211_find_node(ic, sba->cur_macaddr);
|
|
if (curbs == NULL) {
|
|
ieee80211_node_free_unref_cb(ni);
|
|
ic->ic_flags &= ~IEEE80211_F_BGSCAN;
|
|
ieee80211_new_state(ic, IEEE80211_S_SCAN, -1);
|
|
return;
|
|
}
|
|
|
|
if (ifp->if_flags & IFF_DEBUG) {
|
|
printf("%s: roaming from %s chan %d ",
|
|
ifp->if_xname, ether_sprintf(curbs->ni_macaddr),
|
|
ieee80211_chan2ieee(ic, curbs->ni_chan));
|
|
printf("to %s chan %d\n", ether_sprintf(selbs->ni_macaddr),
|
|
ieee80211_chan2ieee(ic, selbs->ni_chan));
|
|
}
|
|
ieee80211_node_newstate(curbs, IEEE80211_STA_CACHE);
|
|
/*
|
|
* ieee80211_node_join_bss() frees arg and ic->ic_bss via
|
|
* ic->ic_node_copy() in ieee80211_node_cleanup().
|
|
*/
|
|
ieee80211_node_join_bss(ic, selbs);
|
|
}
|
|
|
|
void
|
|
ieee80211_node_join_bss(struct ieee80211com *ic, struct ieee80211_node *selbs)
|
|
{
|
|
enum ieee80211_phymode mode;
|
|
struct ieee80211_node *ni;
|
|
uint32_t assoc_fail = 0;
|
|
|
|
/* Reinitialize media mode and channels if needed. */
|
|
mode = ieee80211_chan2mode(ic, selbs->ni_chan);
|
|
if (mode != ic->ic_curmode)
|
|
ieee80211_setmode(ic, mode);
|
|
|
|
/* Keep recorded association failures for this BSS/ESS intact. */
|
|
if (IEEE80211_ADDR_EQ(ic->ic_bss->ni_macaddr, selbs->ni_macaddr) ||
|
|
(ic->ic_des_esslen > 0 && ic->ic_des_esslen == selbs->ni_esslen &&
|
|
memcmp(ic->ic_des_essid, selbs->ni_essid, selbs->ni_esslen) == 0))
|
|
assoc_fail = ic->ic_bss->ni_assoc_fail;
|
|
|
|
(*ic->ic_node_copy)(ic, ic->ic_bss, selbs);
|
|
ni = ic->ic_bss;
|
|
ni->ni_assoc_fail |= assoc_fail;
|
|
|
|
ic->ic_curmode = ieee80211_chan2mode(ic, ni->ni_chan);
|
|
|
|
/* Make sure we send valid rates in an association request. */
|
|
if (ic->ic_opmode == IEEE80211_M_STA)
|
|
ieee80211_fix_rate(ic, ni,
|
|
IEEE80211_F_DOSORT | IEEE80211_F_DOFRATE |
|
|
IEEE80211_F_DONEGO | IEEE80211_F_DODEL);
|
|
|
|
if (ic->ic_flags & IEEE80211_F_RSNON)
|
|
ieee80211_choose_rsnparams(ic);
|
|
else if (ic->ic_flags & IEEE80211_F_WEPON)
|
|
ni->ni_rsncipher = IEEE80211_CIPHER_USEGROUP;
|
|
|
|
ieee80211_node_newstate(selbs, IEEE80211_STA_BSS);
|
|
#ifndef IEEE80211_STA_ONLY
|
|
if (ic->ic_opmode == IEEE80211_M_IBSS) {
|
|
ieee80211_fix_rate(ic, ni, IEEE80211_F_DOFRATE |
|
|
IEEE80211_F_DONEGO | IEEE80211_F_DODEL);
|
|
if (ni->ni_rates.rs_nrates == 0) {
|
|
ieee80211_new_state(ic, IEEE80211_S_SCAN, -1);
|
|
return;
|
|
}
|
|
ieee80211_new_state(ic, IEEE80211_S_RUN, -1);
|
|
} else
|
|
#endif
|
|
{
|
|
int bgscan = ((ic->ic_flags & IEEE80211_F_BGSCAN) &&
|
|
ic->ic_opmode == IEEE80211_M_STA &&
|
|
ic->ic_state == IEEE80211_S_RUN);
|
|
int auth_next = (ic->ic_opmode == IEEE80211_M_STA &&
|
|
ic->ic_state == IEEE80211_S_AUTH);
|
|
int mgt = -1;
|
|
|
|
timeout_del(&ic->ic_bgscan_timeout);
|
|
ic->ic_flags &= ~IEEE80211_F_BGSCAN;
|
|
|
|
/*
|
|
* After a background scan, we have now switched APs.
|
|
* Pretend we were just de-authed, which makes
|
|
* ieee80211_new_state() try to re-auth and thus send
|
|
* an AUTH frame to our newly selected AP.
|
|
*/
|
|
if (bgscan)
|
|
mgt = IEEE80211_FC0_SUBTYPE_DEAUTH;
|
|
/*
|
|
* If we are trying another AP after the previous one
|
|
* failed (state transition AUTH->AUTH), ensure that
|
|
* ieee80211_new_state() tries to send another auth frame.
|
|
*/
|
|
else if (auth_next)
|
|
mgt = IEEE80211_FC0_SUBTYPE_AUTH;
|
|
|
|
ieee80211_new_state(ic, IEEE80211_S_AUTH, mgt);
|
|
}
|
|
}
|
|
|
|
struct ieee80211_node *
|
|
ieee80211_node_choose_bss(struct ieee80211com *ic, int bgscan,
|
|
struct ieee80211_node **curbs)
|
|
{
|
|
struct ieee80211_node *ni, *nextbs, *selbs = NULL,
|
|
*selbs2 = NULL, *selbs5 = NULL;
|
|
uint8_t min_5ghz_rssi;
|
|
|
|
ni = RBT_MIN(ieee80211_tree, &ic->ic_tree);
|
|
|
|
for (; ni != NULL; ni = nextbs) {
|
|
nextbs = RBT_NEXT(ieee80211_tree, ni);
|
|
if (ni->ni_fails) {
|
|
/*
|
|
* The configuration of the access points may change
|
|
* during my scan. So delete the entry for the AP
|
|
* and retry to associate if there is another beacon.
|
|
*/
|
|
if (ni->ni_fails++ > 2)
|
|
ieee80211_free_node(ic, ni);
|
|
continue;
|
|
}
|
|
|
|
if (curbs && ieee80211_node_cmp(ic->ic_bss, ni) == 0)
|
|
*curbs = ni;
|
|
|
|
if (ieee80211_match_bss(ic, ni, bgscan) != 0)
|
|
continue;
|
|
|
|
if (ic->ic_caps & IEEE80211_C_SCANALLBAND) {
|
|
if (IEEE80211_IS_CHAN_2GHZ(ni->ni_chan) &&
|
|
(selbs2 == NULL || ni->ni_rssi > selbs2->ni_rssi))
|
|
selbs2 = ni;
|
|
else if (IEEE80211_IS_CHAN_5GHZ(ni->ni_chan) &&
|
|
(selbs5 == NULL || ni->ni_rssi > selbs5->ni_rssi))
|
|
selbs5 = ni;
|
|
} else if (selbs == NULL || ni->ni_rssi > selbs->ni_rssi)
|
|
selbs = ni;
|
|
}
|
|
|
|
if (ic->ic_max_rssi)
|
|
min_5ghz_rssi = IEEE80211_RSSI_THRES_RATIO_5GHZ;
|
|
else
|
|
min_5ghz_rssi = (uint8_t)IEEE80211_RSSI_THRES_5GHZ;
|
|
|
|
/*
|
|
* Prefer a 5Ghz AP even if its RSSI is weaker than the best 2Ghz AP
|
|
* (as long as it meets the minimum RSSI threshold) since the 5Ghz band
|
|
* is usually less saturated.
|
|
*/
|
|
if (selbs5 && (*ic->ic_node_checkrssi)(ic, selbs5))
|
|
selbs = selbs5;
|
|
else if (selbs5 && selbs2)
|
|
selbs = (selbs5->ni_rssi >= selbs2->ni_rssi ? selbs5 : selbs2);
|
|
else if (selbs2)
|
|
selbs = selbs2;
|
|
else if (selbs5)
|
|
selbs = selbs5;
|
|
|
|
return selbs;
|
|
}
|
|
|
|
/*
|
|
* Complete a scan of potential channels.
|
|
*/
|
|
void
|
|
ieee80211_end_scan(struct ifnet *ifp)
|
|
{
|
|
struct ieee80211com *ic = (void *)ifp;
|
|
struct ieee80211_node *ni, *selbs = NULL, *curbs = NULL;
|
|
int bgscan = ((ic->ic_flags & IEEE80211_F_BGSCAN) &&
|
|
ic->ic_opmode == IEEE80211_M_STA &&
|
|
ic->ic_state == IEEE80211_S_RUN);
|
|
|
|
if (ifp->if_flags & IFF_DEBUG)
|
|
printf("%s: end %s scan\n", ifp->if_xname,
|
|
bgscan ? "background" :
|
|
((ic->ic_flags & IEEE80211_F_ASCAN) ?
|
|
"active" : "passive"));
|
|
|
|
if (ic->ic_scan_count)
|
|
ic->ic_flags &= ~IEEE80211_F_ASCAN;
|
|
|
|
if (ic->ic_opmode == IEEE80211_M_STA)
|
|
ieee80211_clean_inactive_nodes(ic, IEEE80211_INACT_SCAN);
|
|
|
|
ni = RBT_MIN(ieee80211_tree, &ic->ic_tree);
|
|
|
|
#ifndef IEEE80211_STA_ONLY
|
|
if (ic->ic_opmode == IEEE80211_M_HOSTAP) {
|
|
/* XXX off stack? */
|
|
u_char occupied[howmany(IEEE80211_CHAN_MAX, NBBY)];
|
|
int i, fail;
|
|
|
|
/*
|
|
* The passive scan to look for existing AP's completed,
|
|
* select a channel to camp on. Identify the channels
|
|
* that already have one or more AP's and try to locate
|
|
* an unoccupied one. If that fails, pick a random
|
|
* channel from the active set.
|
|
*/
|
|
memset(occupied, 0, sizeof(occupied));
|
|
RBT_FOREACH(ni, ieee80211_tree, &ic->ic_tree)
|
|
setbit(occupied, ieee80211_chan2ieee(ic, ni->ni_chan));
|
|
for (i = 0; i < IEEE80211_CHAN_MAX; i++)
|
|
if (isset(ic->ic_chan_active, i) && isclr(occupied, i))
|
|
break;
|
|
if (i == IEEE80211_CHAN_MAX) {
|
|
fail = arc4random() & 3; /* random 0-3 */
|
|
for (i = 0; i < IEEE80211_CHAN_MAX; i++)
|
|
if (isset(ic->ic_chan_active, i) && fail-- == 0)
|
|
break;
|
|
}
|
|
ieee80211_create_ibss(ic, &ic->ic_channels[i]);
|
|
return;
|
|
}
|
|
#endif
|
|
if (ni == NULL) {
|
|
DPRINTF(("no scan candidate\n"));
|
|
notfound:
|
|
|
|
#ifndef IEEE80211_STA_ONLY
|
|
if (ic->ic_opmode == IEEE80211_M_IBSS &&
|
|
(ic->ic_flags & IEEE80211_F_IBSSON) &&
|
|
ic->ic_des_esslen != 0) {
|
|
ieee80211_create_ibss(ic, ic->ic_ibss_chan);
|
|
return;
|
|
}
|
|
#endif
|
|
/*
|
|
* Reset the list of channels to scan and scan the next mode
|
|
* if nothing has been found.
|
|
* If the device scans all bands in one fell swoop, return
|
|
* current scan results to userspace regardless of mode.
|
|
* This will loop forever until an access point is found.
|
|
*/
|
|
ieee80211_reset_scan(ifp);
|
|
if (ieee80211_next_mode(ifp) == IEEE80211_MODE_AUTO ||
|
|
(ic->ic_caps & IEEE80211_C_SCANALLBAND))
|
|
ic->ic_scan_count++;
|
|
|
|
ieee80211_next_scan(ifp);
|
|
return;
|
|
}
|
|
|
|
/* Possibly switch which ssid we are associated with */
|
|
if (!bgscan && ic->ic_opmode == IEEE80211_M_STA)
|
|
ieee80211_switch_ess(ic);
|
|
|
|
selbs = ieee80211_node_choose_bss(ic, bgscan, &curbs);
|
|
if (bgscan) {
|
|
struct ieee80211_node_switch_bss_arg *arg;
|
|
|
|
/* AP disappeared? Should not happen. */
|
|
if (selbs == NULL || curbs == NULL) {
|
|
ic->ic_flags &= ~IEEE80211_F_BGSCAN;
|
|
goto notfound;
|
|
}
|
|
|
|
/*
|
|
* After a background scan we might end up choosing the
|
|
* same AP again. Or the newly selected AP's RSSI level
|
|
* might be low enough to trigger another background scan.
|
|
* Do not change ic->ic_bss in these cases and make
|
|
* background scans less frequent.
|
|
*/
|
|
if (selbs == curbs || !(*ic->ic_node_checkrssi)(ic, selbs)) {
|
|
if (ic->ic_bgscan_fail < IEEE80211_BGSCAN_FAIL_MAX) {
|
|
if (ic->ic_bgscan_fail <= 0)
|
|
ic->ic_bgscan_fail = 1;
|
|
else
|
|
ic->ic_bgscan_fail *= 2;
|
|
}
|
|
ic->ic_flags &= ~IEEE80211_F_BGSCAN;
|
|
|
|
/*
|
|
* HT is negotiated during association so we must use
|
|
* ic_bss to check HT. The nodes tree was re-populated
|
|
* during background scan and therefore selbs and curbs
|
|
* may not carry HT information.
|
|
*/
|
|
ni = ic->ic_bss;
|
|
if (ni->ni_flags & IEEE80211_NODE_VHT)
|
|
ieee80211_setmode(ic, IEEE80211_MODE_11AC);
|
|
else if (ni->ni_flags & IEEE80211_NODE_HT)
|
|
ieee80211_setmode(ic, IEEE80211_MODE_11N);
|
|
else
|
|
ieee80211_setmode(ic,
|
|
ieee80211_chan2mode(ic, ni->ni_chan));
|
|
return;
|
|
}
|
|
|
|
arg = malloc(sizeof(*arg), M_DEVBUF, M_NOWAIT | M_ZERO);
|
|
if (arg == NULL) {
|
|
ic->ic_flags &= ~IEEE80211_F_BGSCAN;
|
|
return;
|
|
}
|
|
|
|
ic->ic_bgscan_fail = 0;
|
|
|
|
/* Prevent dispatch of additional data frames to hardware. */
|
|
ic->ic_xflags |= IEEE80211_F_TX_MGMT_ONLY;
|
|
|
|
IEEE80211_ADDR_COPY(arg->cur_macaddr, curbs->ni_macaddr);
|
|
IEEE80211_ADDR_COPY(arg->sel_macaddr, selbs->ni_macaddr);
|
|
|
|
if (ic->ic_bgscan_done) {
|
|
/*
|
|
* The driver will flush its queues and allow roaming
|
|
* to proceed once queues have been flushed.
|
|
* On failure the driver will move back to SCAN state.
|
|
*/
|
|
ic->ic_bgscan_done(ic, arg, sizeof(*arg));
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Install a callback which will switch us to the new AP once
|
|
* all dispatched frames have been processed by hardware.
|
|
*/
|
|
ic->ic_bss->ni_unref_arg = arg;
|
|
ic->ic_bss->ni_unref_arg_size = sizeof(*arg);
|
|
if (ic->ic_bss->ni_refcnt > 0)
|
|
ic->ic_bss->ni_unref_cb = ieee80211_node_tx_flushed;
|
|
else
|
|
ieee80211_node_tx_flushed(ic, ni);
|
|
/* F_BGSCAN flag gets cleared in ieee80211_node_join_bss(). */
|
|
return;
|
|
} else if (selbs == NULL)
|
|
goto notfound;
|
|
|
|
ieee80211_node_join_bss(ic, selbs);
|
|
}
|
|
|
|
/*
|
|
* Autoselect the best RSN parameters (protocol, AKMP, pairwise cipher...)
|
|
* that are supported by both peers (STA mode only).
|
|
*/
|
|
void
|
|
ieee80211_choose_rsnparams(struct ieee80211com *ic)
|
|
{
|
|
struct ieee80211_node *ni = ic->ic_bss;
|
|
struct ieee80211_pmk *pmk;
|
|
|
|
/* filter out unsupported protocol versions */
|
|
ni->ni_rsnprotos &= ic->ic_rsnprotos;
|
|
/* prefer RSN (aka WPA2) over WPA */
|
|
if (ni->ni_rsnprotos & IEEE80211_PROTO_RSN)
|
|
ni->ni_rsnprotos = IEEE80211_PROTO_RSN;
|
|
else
|
|
ni->ni_rsnprotos = IEEE80211_PROTO_WPA;
|
|
|
|
/* filter out unsupported AKMPs */
|
|
ni->ni_rsnakms &= ic->ic_rsnakms;
|
|
/* prefer SHA-256 based AKMPs */
|
|
if ((ic->ic_flags & IEEE80211_F_PSK) && (ni->ni_rsnakms &
|
|
(IEEE80211_AKM_PSK | IEEE80211_AKM_SHA256_PSK))) {
|
|
/* AP supports PSK AKMP and a PSK is configured */
|
|
if (ni->ni_rsnakms & IEEE80211_AKM_SHA256_PSK)
|
|
ni->ni_rsnakms = IEEE80211_AKM_SHA256_PSK;
|
|
else
|
|
ni->ni_rsnakms = IEEE80211_AKM_PSK;
|
|
} else {
|
|
if (ni->ni_rsnakms & IEEE80211_AKM_SHA256_8021X)
|
|
ni->ni_rsnakms = IEEE80211_AKM_SHA256_8021X;
|
|
else
|
|
ni->ni_rsnakms = IEEE80211_AKM_8021X;
|
|
/* check if we have a cached PMK for this AP */
|
|
if (ni->ni_rsnprotos == IEEE80211_PROTO_RSN &&
|
|
(pmk = ieee80211_pmksa_find(ic, ni, NULL)) != NULL) {
|
|
memcpy(ni->ni_pmkid, pmk->pmk_pmkid,
|
|
IEEE80211_PMKID_LEN);
|
|
ni->ni_flags |= IEEE80211_NODE_PMKID;
|
|
}
|
|
}
|
|
|
|
/* filter out unsupported pairwise ciphers */
|
|
ni->ni_rsnciphers &= ic->ic_rsnciphers;
|
|
/* prefer CCMP over TKIP */
|
|
if (ni->ni_rsnciphers & IEEE80211_CIPHER_CCMP)
|
|
ni->ni_rsnciphers = IEEE80211_CIPHER_CCMP;
|
|
else
|
|
ni->ni_rsnciphers = IEEE80211_CIPHER_TKIP;
|
|
ni->ni_rsncipher = ni->ni_rsnciphers;
|
|
|
|
/* use MFP if we both support it */
|
|
if ((ic->ic_caps & IEEE80211_C_MFP) &&
|
|
(ni->ni_rsncaps & IEEE80211_RSNCAP_MFPC))
|
|
ni->ni_flags |= IEEE80211_NODE_MFP;
|
|
}
|
|
|
|
int
|
|
ieee80211_get_rate(struct ieee80211com *ic)
|
|
{
|
|
u_int8_t (*rates)[IEEE80211_RATE_MAXSIZE];
|
|
int rate;
|
|
|
|
rates = &ic->ic_bss->ni_rates.rs_rates;
|
|
|
|
if (ic->ic_fixed_rate != -1)
|
|
rate = (*rates)[ic->ic_fixed_rate];
|
|
else if (ic->ic_state == IEEE80211_S_RUN)
|
|
rate = (*rates)[ic->ic_bss->ni_txrate];
|
|
else
|
|
rate = 0;
|
|
|
|
return rate & IEEE80211_RATE_VAL;
|
|
}
|
|
|
|
struct ieee80211_node *
|
|
ieee80211_node_alloc(struct ieee80211com *ic)
|
|
{
|
|
return malloc(sizeof(struct ieee80211_node), M_DEVBUF,
|
|
M_NOWAIT | M_ZERO);
|
|
}
|
|
|
|
void
|
|
ieee80211_node_cleanup(struct ieee80211com *ic, struct ieee80211_node *ni)
|
|
{
|
|
if (ni->ni_rsnie != NULL) {
|
|
free(ni->ni_rsnie, M_DEVBUF, 2 + ni->ni_rsnie[1]);
|
|
ni->ni_rsnie = NULL;
|
|
}
|
|
ieee80211_ba_del(ni);
|
|
#ifndef IEEE80211_STA_ONLY
|
|
mq_purge(&ni->ni_savedq);
|
|
#endif
|
|
ieee80211_node_free_unref_cb(ni);
|
|
}
|
|
|
|
void
|
|
ieee80211_node_free(struct ieee80211com *ic, struct ieee80211_node *ni)
|
|
{
|
|
ieee80211_node_cleanup(ic, ni);
|
|
free(ni, M_DEVBUF, 0);
|
|
}
|
|
|
|
void
|
|
ieee80211_node_copy(struct ieee80211com *ic,
|
|
struct ieee80211_node *dst, const struct ieee80211_node *src)
|
|
{
|
|
ieee80211_node_cleanup(ic, dst);
|
|
*dst = *src;
|
|
dst->ni_rsnie = NULL;
|
|
if (src->ni_rsnie != NULL)
|
|
ieee80211_save_ie(src->ni_rsnie, &dst->ni_rsnie);
|
|
ieee80211_node_set_timeouts(dst);
|
|
#ifndef IEEE80211_STA_ONLY
|
|
mq_init(&dst->ni_savedq, IEEE80211_PS_MAX_QUEUE, IPL_NET);
|
|
#endif
|
|
}
|
|
|
|
u_int8_t
|
|
ieee80211_node_getrssi(struct ieee80211com *ic,
|
|
const struct ieee80211_node *ni)
|
|
{
|
|
return ni->ni_rssi;
|
|
}
|
|
|
|
int
|
|
ieee80211_node_checkrssi(struct ieee80211com *ic,
|
|
const struct ieee80211_node *ni)
|
|
{
|
|
uint8_t thres;
|
|
|
|
if (ni->ni_chan == IEEE80211_CHAN_ANYC)
|
|
return 0;
|
|
|
|
if (ic->ic_max_rssi) {
|
|
thres = (IEEE80211_IS_CHAN_2GHZ(ni->ni_chan)) ?
|
|
IEEE80211_RSSI_THRES_RATIO_2GHZ :
|
|
IEEE80211_RSSI_THRES_RATIO_5GHZ;
|
|
return ((ni->ni_rssi * 100) / ic->ic_max_rssi >= thres);
|
|
}
|
|
|
|
thres = (IEEE80211_IS_CHAN_2GHZ(ni->ni_chan)) ?
|
|
IEEE80211_RSSI_THRES_2GHZ :
|
|
IEEE80211_RSSI_THRES_5GHZ;
|
|
return (ni->ni_rssi >= (u_int8_t)thres);
|
|
}
|
|
|
|
void
|
|
ieee80211_node_set_timeouts(struct ieee80211_node *ni)
|
|
{
|
|
int i;
|
|
|
|
#ifndef IEEE80211_STA_ONLY
|
|
timeout_set(&ni->ni_eapol_to, ieee80211_eapol_timeout, ni);
|
|
timeout_set(&ni->ni_sa_query_to, ieee80211_sa_query_timeout, ni);
|
|
#endif
|
|
timeout_set(&ni->ni_addba_req_to[EDCA_AC_BE],
|
|
ieee80211_node_addba_request_ac_be_to, ni);
|
|
timeout_set(&ni->ni_addba_req_to[EDCA_AC_BK],
|
|
ieee80211_node_addba_request_ac_bk_to, ni);
|
|
timeout_set(&ni->ni_addba_req_to[EDCA_AC_VI],
|
|
ieee80211_node_addba_request_ac_vi_to, ni);
|
|
timeout_set(&ni->ni_addba_req_to[EDCA_AC_VO],
|
|
ieee80211_node_addba_request_ac_vo_to, ni);
|
|
for (i = 0; i < nitems(ni->ni_addba_req_intval); i++)
|
|
ni->ni_addba_req_intval[i] = 1;
|
|
}
|
|
|
|
void
|
|
ieee80211_setup_node(struct ieee80211com *ic,
|
|
struct ieee80211_node *ni, const u_int8_t *macaddr)
|
|
{
|
|
int i, s;
|
|
|
|
DPRINTF(("%s\n", ether_sprintf((u_int8_t *)macaddr)));
|
|
IEEE80211_ADDR_COPY(ni->ni_macaddr, macaddr);
|
|
ieee80211_node_newstate(ni, IEEE80211_STA_CACHE);
|
|
|
|
ni->ni_ic = ic; /* back-pointer */
|
|
/* Initialize cached last sequence numbers with invalid values. */
|
|
ni->ni_rxseq = 0xffffU;
|
|
for (i=0; i < IEEE80211_NUM_TID; ++i)
|
|
ni->ni_qos_rxseqs[i] = 0xffffU;
|
|
#ifndef IEEE80211_STA_ONLY
|
|
mq_init(&ni->ni_savedq, IEEE80211_PS_MAX_QUEUE, IPL_NET);
|
|
#endif
|
|
ieee80211_node_set_timeouts(ni);
|
|
|
|
s = splnet();
|
|
RBT_INSERT(ieee80211_tree, &ic->ic_tree, ni);
|
|
ic->ic_nnodes++;
|
|
splx(s);
|
|
}
|
|
|
|
struct ieee80211_node *
|
|
ieee80211_alloc_node(struct ieee80211com *ic, const u_int8_t *macaddr)
|
|
{
|
|
struct ieee80211_node *ni = ieee80211_alloc_node_helper(ic);
|
|
if (ni != NULL)
|
|
ieee80211_setup_node(ic, ni, macaddr);
|
|
else
|
|
ic->ic_stats.is_rx_nodealloc++;
|
|
return ni;
|
|
}
|
|
|
|
struct ieee80211_node *
|
|
ieee80211_dup_bss(struct ieee80211com *ic, const u_int8_t *macaddr)
|
|
{
|
|
struct ieee80211_node *ni = ieee80211_alloc_node_helper(ic);
|
|
if (ni != NULL) {
|
|
ieee80211_setup_node(ic, ni, macaddr);
|
|
/*
|
|
* Inherit from ic_bss.
|
|
*/
|
|
IEEE80211_ADDR_COPY(ni->ni_bssid, ic->ic_bss->ni_bssid);
|
|
ni->ni_chan = ic->ic_bss->ni_chan;
|
|
} else
|
|
ic->ic_stats.is_rx_nodealloc++;
|
|
return ni;
|
|
}
|
|
|
|
struct ieee80211_node *
|
|
ieee80211_find_node(struct ieee80211com *ic, const u_int8_t *macaddr)
|
|
{
|
|
struct ieee80211_node *ni;
|
|
int cmp;
|
|
|
|
/* similar to RBT_FIND except we compare keys, not nodes */
|
|
ni = RBT_ROOT(ieee80211_tree, &ic->ic_tree);
|
|
while (ni != NULL) {
|
|
cmp = memcmp(macaddr, ni->ni_macaddr, IEEE80211_ADDR_LEN);
|
|
if (cmp < 0)
|
|
ni = RBT_LEFT(ieee80211_tree, ni);
|
|
else if (cmp > 0)
|
|
ni = RBT_RIGHT(ieee80211_tree, ni);
|
|
else
|
|
break;
|
|
}
|
|
return ni;
|
|
}
|
|
|
|
/*
|
|
* Return a reference to the appropriate node for sending
|
|
* a data frame. This handles node discovery in adhoc networks.
|
|
*
|
|
* Drivers will call this, so increase the reference count before
|
|
* returning the node.
|
|
*/
|
|
struct ieee80211_node *
|
|
ieee80211_find_txnode(struct ieee80211com *ic, const u_int8_t *macaddr)
|
|
{
|
|
#ifndef IEEE80211_STA_ONLY
|
|
struct ieee80211_node *ni;
|
|
int s;
|
|
#endif
|
|
|
|
/*
|
|
* The destination address should be in the node table
|
|
* unless we are operating in station mode or this is a
|
|
* multicast/broadcast frame.
|
|
*/
|
|
if (ic->ic_opmode == IEEE80211_M_STA || IEEE80211_IS_MULTICAST(macaddr))
|
|
return ieee80211_ref_node(ic->ic_bss);
|
|
|
|
#ifndef IEEE80211_STA_ONLY
|
|
s = splnet();
|
|
ni = ieee80211_find_node(ic, macaddr);
|
|
splx(s);
|
|
if (ni == NULL) {
|
|
if (ic->ic_opmode != IEEE80211_M_IBSS &&
|
|
ic->ic_opmode != IEEE80211_M_AHDEMO)
|
|
return NULL;
|
|
|
|
/*
|
|
* Fake up a node; this handles node discovery in
|
|
* adhoc mode. Note that for the driver's benefit
|
|
* we treat this like an association so the driver
|
|
* has an opportunity to setup its private state.
|
|
*
|
|
* XXX need better way to handle this; issue probe
|
|
* request so we can deduce rate set, etc.
|
|
*/
|
|
if ((ni = ieee80211_dup_bss(ic, macaddr)) == NULL)
|
|
return NULL;
|
|
/* XXX no rate negotiation; just dup */
|
|
ni->ni_rates = ic->ic_bss->ni_rates;
|
|
ni->ni_txrate = 0;
|
|
if (ic->ic_newassoc)
|
|
(*ic->ic_newassoc)(ic, ni, 1);
|
|
}
|
|
return ieee80211_ref_node(ni);
|
|
#else
|
|
return NULL; /* can't get there */
|
|
#endif /* IEEE80211_STA_ONLY */
|
|
}
|
|
|
|
/*
|
|
* It is usually desirable to process a Rx packet using its sender's
|
|
* node-record instead of the BSS record.
|
|
*
|
|
* - AP mode: keep a node-record for every authenticated/associated
|
|
* station *in the BSS*. For future use, we also track neighboring
|
|
* APs, since they might belong to the same ESS. APs in the same
|
|
* ESS may bridge packets to each other, forming a Wireless
|
|
* Distribution System (WDS).
|
|
*
|
|
* - IBSS mode: keep a node-record for every station *in the BSS*.
|
|
* Also track neighboring stations by their beacons/probe responses.
|
|
*
|
|
* - monitor mode: keep a node-record for every sender, regardless
|
|
* of BSS.
|
|
*
|
|
* - STA mode: the only available node-record is the BSS record,
|
|
* ic->ic_bss.
|
|
*
|
|
* Of all the 802.11 Control packets, only the node-records for
|
|
* RTS packets node-record can be looked up.
|
|
*
|
|
* Return non-zero if the packet's node-record is kept, zero
|
|
* otherwise.
|
|
*/
|
|
static __inline int
|
|
ieee80211_needs_rxnode(struct ieee80211com *ic,
|
|
const struct ieee80211_frame *wh, const u_int8_t **bssid)
|
|
{
|
|
int monitor, rc = 0;
|
|
|
|
monitor = (ic->ic_opmode == IEEE80211_M_MONITOR);
|
|
|
|
*bssid = NULL;
|
|
|
|
switch (wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) {
|
|
case IEEE80211_FC0_TYPE_CTL:
|
|
if (!monitor)
|
|
break;
|
|
return (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) ==
|
|
IEEE80211_FC0_SUBTYPE_RTS;
|
|
case IEEE80211_FC0_TYPE_MGT:
|
|
*bssid = wh->i_addr3;
|
|
switch (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) {
|
|
case IEEE80211_FC0_SUBTYPE_BEACON:
|
|
case IEEE80211_FC0_SUBTYPE_PROBE_RESP:
|
|
break;
|
|
default:
|
|
#ifndef IEEE80211_STA_ONLY
|
|
if (ic->ic_opmode == IEEE80211_M_STA)
|
|
break;
|
|
rc = IEEE80211_ADDR_EQ(*bssid, ic->ic_bss->ni_bssid) ||
|
|
IEEE80211_ADDR_EQ(*bssid, etherbroadcastaddr);
|
|
#endif
|
|
break;
|
|
}
|
|
break;
|
|
case IEEE80211_FC0_TYPE_DATA:
|
|
switch (wh->i_fc[1] & IEEE80211_FC1_DIR_MASK) {
|
|
case IEEE80211_FC1_DIR_NODS:
|
|
*bssid = wh->i_addr3;
|
|
#ifndef IEEE80211_STA_ONLY
|
|
if (ic->ic_opmode == IEEE80211_M_IBSS ||
|
|
ic->ic_opmode == IEEE80211_M_AHDEMO)
|
|
rc = IEEE80211_ADDR_EQ(*bssid,
|
|
ic->ic_bss->ni_bssid);
|
|
#endif
|
|
break;
|
|
case IEEE80211_FC1_DIR_TODS:
|
|
*bssid = wh->i_addr1;
|
|
#ifndef IEEE80211_STA_ONLY
|
|
if (ic->ic_opmode == IEEE80211_M_HOSTAP)
|
|
rc = IEEE80211_ADDR_EQ(*bssid,
|
|
ic->ic_bss->ni_bssid);
|
|
#endif
|
|
break;
|
|
case IEEE80211_FC1_DIR_FROMDS:
|
|
case IEEE80211_FC1_DIR_DSTODS:
|
|
*bssid = wh->i_addr2;
|
|
#ifndef IEEE80211_STA_ONLY
|
|
rc = (ic->ic_opmode == IEEE80211_M_HOSTAP);
|
|
#endif
|
|
break;
|
|
}
|
|
break;
|
|
}
|
|
return monitor || rc;
|
|
}
|
|
|
|
/*
|
|
* Drivers call this, so increase the reference count before returning
|
|
* the node.
|
|
*/
|
|
struct ieee80211_node *
|
|
ieee80211_find_rxnode(struct ieee80211com *ic,
|
|
const struct ieee80211_frame *wh)
|
|
{
|
|
static const u_int8_t zero[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
|
|
struct ieee80211_node *ni;
|
|
const u_int8_t *bssid;
|
|
int s;
|
|
|
|
if (!ieee80211_needs_rxnode(ic, wh, &bssid))
|
|
return ieee80211_ref_node(ic->ic_bss);
|
|
|
|
s = splnet();
|
|
ni = ieee80211_find_node(ic, wh->i_addr2);
|
|
splx(s);
|
|
|
|
if (ni != NULL)
|
|
return ieee80211_ref_node(ni);
|
|
#ifndef IEEE80211_STA_ONLY
|
|
if (ic->ic_opmode == IEEE80211_M_HOSTAP)
|
|
return ieee80211_ref_node(ic->ic_bss);
|
|
#endif
|
|
/* XXX see remarks in ieee80211_find_txnode */
|
|
/* XXX no rate negotiation; just dup */
|
|
if ((ni = ieee80211_dup_bss(ic, wh->i_addr2)) == NULL)
|
|
return ieee80211_ref_node(ic->ic_bss);
|
|
|
|
IEEE80211_ADDR_COPY(ni->ni_bssid, (bssid != NULL) ? bssid : zero);
|
|
|
|
ni->ni_rates = ic->ic_bss->ni_rates;
|
|
ni->ni_txrate = 0;
|
|
if (ic->ic_newassoc)
|
|
(*ic->ic_newassoc)(ic, ni, 1);
|
|
|
|
DPRINTF(("faked-up node %p for %s\n", ni,
|
|
ether_sprintf((u_int8_t *)wh->i_addr2)));
|
|
|
|
return ieee80211_ref_node(ni);
|
|
}
|
|
|
|
void
|
|
ieee80211_node_tx_ba_clear(struct ieee80211_node *ni, int tid)
|
|
{
|
|
struct ieee80211_tx_ba *ba = &ni->ni_tx_ba[tid];
|
|
|
|
if (ba->ba_state != IEEE80211_BA_INIT) {
|
|
if (timeout_pending(&ba->ba_to))
|
|
timeout_del(&ba->ba_to);
|
|
ba->ba_state = IEEE80211_BA_INIT;
|
|
}
|
|
}
|
|
|
|
void
|
|
ieee80211_ba_del(struct ieee80211_node *ni)
|
|
{
|
|
int tid;
|
|
|
|
for (tid = 0; tid < nitems(ni->ni_rx_ba); tid++) {
|
|
struct ieee80211_rx_ba *ba = &ni->ni_rx_ba[tid];
|
|
if (ba->ba_state != IEEE80211_BA_INIT) {
|
|
if (timeout_pending(&ba->ba_to))
|
|
timeout_del(&ba->ba_to);
|
|
if (timeout_pending(&ba->ba_gap_to))
|
|
timeout_del(&ba->ba_gap_to);
|
|
ba->ba_state = IEEE80211_BA_INIT;
|
|
}
|
|
}
|
|
|
|
for (tid = 0; tid < nitems(ni->ni_tx_ba); tid++)
|
|
ieee80211_node_tx_ba_clear(ni, tid);
|
|
|
|
timeout_del(&ni->ni_addba_req_to[EDCA_AC_BE]);
|
|
timeout_del(&ni->ni_addba_req_to[EDCA_AC_BK]);
|
|
timeout_del(&ni->ni_addba_req_to[EDCA_AC_VI]);
|
|
timeout_del(&ni->ni_addba_req_to[EDCA_AC_VO]);
|
|
}
|
|
|
|
void
|
|
ieee80211_free_node(struct ieee80211com *ic, struct ieee80211_node *ni)
|
|
{
|
|
if (ni == ic->ic_bss)
|
|
panic("freeing bss node");
|
|
|
|
splassert(IPL_NET);
|
|
|
|
DPRINTF(("%s\n", ether_sprintf(ni->ni_macaddr)));
|
|
#ifndef IEEE80211_STA_ONLY
|
|
timeout_del(&ni->ni_eapol_to);
|
|
timeout_del(&ni->ni_sa_query_to);
|
|
IEEE80211_AID_CLR(ni->ni_associd, ic->ic_aid_bitmap);
|
|
#endif
|
|
ieee80211_ba_del(ni);
|
|
RBT_REMOVE(ieee80211_tree, &ic->ic_tree, ni);
|
|
ic->ic_nnodes--;
|
|
#ifndef IEEE80211_STA_ONLY
|
|
if (mq_purge(&ni->ni_savedq) > 0) {
|
|
if (ic->ic_set_tim != NULL)
|
|
(*ic->ic_set_tim)(ic, ni->ni_associd, 0);
|
|
}
|
|
#endif
|
|
(*ic->ic_node_free)(ic, ni);
|
|
/* TBD indicate to drivers that a new node can be allocated */
|
|
}
|
|
|
|
void
|
|
ieee80211_release_node(struct ieee80211com *ic, struct ieee80211_node *ni)
|
|
{
|
|
int s;
|
|
void (*ni_unref_cb)(struct ieee80211com *, struct ieee80211_node *);
|
|
|
|
DPRINTF(("%s refcnt %u\n", ether_sprintf(ni->ni_macaddr),
|
|
ni->ni_refcnt));
|
|
s = splnet();
|
|
if (ieee80211_node_decref(ni) == 0) {
|
|
if (ni->ni_unref_cb) {
|
|
/* The callback may set ni->ni_unref_cb again. */
|
|
ni_unref_cb = ni->ni_unref_cb;
|
|
ni->ni_unref_cb = NULL;
|
|
/* Freed by callback if necessary: */
|
|
(*ni_unref_cb)(ic, ni);
|
|
}
|
|
if (ni->ni_state == IEEE80211_STA_COLLECT)
|
|
ieee80211_free_node(ic, ni);
|
|
}
|
|
splx(s);
|
|
}
|
|
|
|
void
|
|
ieee80211_free_allnodes(struct ieee80211com *ic, int clear_ic_bss)
|
|
{
|
|
struct ieee80211_node *ni;
|
|
int s;
|
|
|
|
DPRINTF(("freeing all nodes\n"));
|
|
s = splnet();
|
|
while ((ni = RBT_MIN(ieee80211_tree, &ic->ic_tree)) != NULL)
|
|
ieee80211_free_node(ic, ni);
|
|
splx(s);
|
|
|
|
if (clear_ic_bss && ic->ic_bss != NULL)
|
|
ieee80211_node_cleanup(ic, ic->ic_bss);
|
|
}
|
|
|
|
void
|
|
ieee80211_clean_cached(struct ieee80211com *ic)
|
|
{
|
|
struct ieee80211_node *ni, *next_ni;
|
|
int s;
|
|
|
|
s = splnet();
|
|
for (ni = RBT_MIN(ieee80211_tree, &ic->ic_tree);
|
|
ni != NULL; ni = next_ni) {
|
|
next_ni = RBT_NEXT(ieee80211_tree, ni);
|
|
if (ni->ni_state == IEEE80211_STA_CACHE)
|
|
ieee80211_free_node(ic, ni);
|
|
}
|
|
splx(s);
|
|
}
|
|
/*
|
|
* Timeout inactive nodes.
|
|
*
|
|
* If called because of a cache timeout, which happens only in hostap and ibss
|
|
* modes, clean all inactive cached or authenticated nodes but don't de-auth
|
|
* any associated nodes. Also update HT protection settings.
|
|
*
|
|
* Else, this function is called because a new node must be allocated but the
|
|
* node cache is full. In this case, return as soon as a free slot was made
|
|
* available. If acting as hostap, clean cached nodes regardless of their
|
|
* recent activity and also allow de-authing of authenticated nodes older
|
|
* than one cache wait interval, and de-authing of inactive associated nodes.
|
|
*/
|
|
void
|
|
ieee80211_clean_nodes(struct ieee80211com *ic, int cache_timeout)
|
|
{
|
|
struct ieee80211_node *ni, *next_ni;
|
|
u_int gen = ic->ic_scangen++; /* NB: ok 'cuz single-threaded*/
|
|
int s;
|
|
#ifndef IEEE80211_STA_ONLY
|
|
int nnodes = 0, nonht = 0, nonhtassoc = 0;
|
|
struct ifnet *ifp = &ic->ic_if;
|
|
enum ieee80211_htprot htprot = IEEE80211_HTPROT_NONE;
|
|
enum ieee80211_protmode protmode = IEEE80211_PROT_NONE;
|
|
#endif
|
|
|
|
s = splnet();
|
|
for (ni = RBT_MIN(ieee80211_tree, &ic->ic_tree);
|
|
ni != NULL; ni = next_ni) {
|
|
next_ni = RBT_NEXT(ieee80211_tree, ni);
|
|
if (!cache_timeout && ic->ic_nnodes < ic->ic_max_nnodes)
|
|
break;
|
|
if (ni->ni_scangen == gen) /* previously handled */
|
|
continue;
|
|
#ifndef IEEE80211_STA_ONLY
|
|
nnodes++;
|
|
if ((ic->ic_flags & IEEE80211_F_HTON) && cache_timeout) {
|
|
/*
|
|
* Check if node supports 802.11n.
|
|
* Only require HT capabilities IE for this check.
|
|
* Nodes might never reveal their supported MCS to us
|
|
* unless they go through a full association sequence.
|
|
* ieee80211_node_supports_ht() could misclassify them.
|
|
*/
|
|
if ((ni->ni_flags & IEEE80211_NODE_HTCAP) == 0) {
|
|
nonht++;
|
|
if (ni->ni_state == IEEE80211_STA_ASSOC)
|
|
nonhtassoc++;
|
|
}
|
|
}
|
|
#endif
|
|
ni->ni_scangen = gen;
|
|
if (ni->ni_refcnt > 0)
|
|
continue;
|
|
#ifndef IEEE80211_STA_ONLY
|
|
if ((ic->ic_opmode == IEEE80211_M_HOSTAP ||
|
|
ic->ic_opmode == IEEE80211_M_IBSS) &&
|
|
ic->ic_state == IEEE80211_S_RUN) {
|
|
if (cache_timeout) {
|
|
if (ni->ni_state != IEEE80211_STA_COLLECT &&
|
|
(ni->ni_state == IEEE80211_STA_ASSOC ||
|
|
ni->ni_inact < IEEE80211_INACT_MAX))
|
|
continue;
|
|
} else {
|
|
if (ic->ic_opmode == IEEE80211_M_HOSTAP &&
|
|
((ni->ni_state == IEEE80211_STA_ASSOC &&
|
|
ni->ni_inact < IEEE80211_INACT_MAX) ||
|
|
(ni->ni_state == IEEE80211_STA_AUTH &&
|
|
ni->ni_inact == 0)))
|
|
continue;
|
|
|
|
if (ic->ic_opmode == IEEE80211_M_IBSS &&
|
|
ni->ni_state != IEEE80211_STA_COLLECT &&
|
|
ni->ni_state != IEEE80211_STA_CACHE &&
|
|
ni->ni_inact < IEEE80211_INACT_MAX)
|
|
continue;
|
|
}
|
|
}
|
|
if (ifp->if_flags & IFF_DEBUG)
|
|
printf("%s: station %s purged from node cache\n",
|
|
ifp->if_xname, ether_sprintf(ni->ni_macaddr));
|
|
#endif
|
|
/*
|
|
* If we're hostap and the node is authenticated, send
|
|
* a deauthentication frame. The node will be freed when
|
|
* the driver calls ieee80211_release_node().
|
|
*/
|
|
#ifndef IEEE80211_STA_ONLY
|
|
nnodes--;
|
|
if ((ic->ic_flags & IEEE80211_F_HTON) && cache_timeout) {
|
|
if ((ni->ni_flags & IEEE80211_NODE_HTCAP) == 0) {
|
|
nonht--;
|
|
if (ni->ni_state == IEEE80211_STA_ASSOC)
|
|
nonhtassoc--;
|
|
}
|
|
}
|
|
if (ic->ic_opmode == IEEE80211_M_HOSTAP &&
|
|
ni->ni_state >= IEEE80211_STA_AUTH &&
|
|
ni->ni_state != IEEE80211_STA_COLLECT) {
|
|
IEEE80211_SEND_MGMT(ic, ni,
|
|
IEEE80211_FC0_SUBTYPE_DEAUTH,
|
|
IEEE80211_REASON_AUTH_EXPIRE);
|
|
ieee80211_node_leave(ic, ni);
|
|
} else
|
|
#endif
|
|
ieee80211_free_node(ic, ni);
|
|
ic->ic_stats.is_node_timeout++;
|
|
}
|
|
|
|
#ifndef IEEE80211_STA_ONLY
|
|
if ((ic->ic_flags & IEEE80211_F_HTON) && cache_timeout) {
|
|
uint16_t htop1 = ic->ic_bss->ni_htop1;
|
|
|
|
/* Update HT protection settings. */
|
|
if (nonht) {
|
|
protmode = IEEE80211_PROT_CTSONLY;
|
|
if (nonhtassoc)
|
|
htprot = IEEE80211_HTPROT_NONHT_MIXED;
|
|
else
|
|
htprot = IEEE80211_HTPROT_NONMEMBER;
|
|
}
|
|
if ((htop1 & IEEE80211_HTOP1_PROT_MASK) != htprot) {
|
|
htop1 &= ~IEEE80211_HTOP1_PROT_MASK;
|
|
htop1 |= htprot;
|
|
ic->ic_bss->ni_htop1 = htop1;
|
|
ic->ic_protmode = protmode;
|
|
if (ic->ic_updateprot)
|
|
ic->ic_updateprot(ic);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* During a cache timeout we iterate over all nodes.
|
|
* Check for node leaks by comparing the actual number of cached
|
|
* nodes with the ic_nnodes count, which is maintained while adding
|
|
* and removing nodes from the cache.
|
|
*/
|
|
if ((ifp->if_flags & IFF_DEBUG) && cache_timeout &&
|
|
nnodes != ic->ic_nnodes)
|
|
printf("%s: number of cached nodes is %d, expected %d,"
|
|
"possible nodes leak\n", ifp->if_xname, nnodes,
|
|
ic->ic_nnodes);
|
|
#endif
|
|
splx(s);
|
|
}
|
|
|
|
void
|
|
ieee80211_clean_inactive_nodes(struct ieee80211com *ic, int inact_max)
|
|
{
|
|
struct ieee80211_node *ni, *next_ni;
|
|
u_int gen = ic->ic_scangen++; /* NB: ok 'cuz single-threaded*/
|
|
int s;
|
|
|
|
s = splnet();
|
|
for (ni = RBT_MIN(ieee80211_tree, &ic->ic_tree);
|
|
ni != NULL; ni = next_ni) {
|
|
next_ni = RBT_NEXT(ieee80211_tree, ni);
|
|
if (ni->ni_scangen == gen) /* previously handled */
|
|
continue;
|
|
ni->ni_scangen = gen;
|
|
if (ni->ni_refcnt > 0 || ni->ni_inact < inact_max)
|
|
continue;
|
|
ieee80211_free_node(ic, ni);
|
|
ic->ic_stats.is_node_timeout++;
|
|
}
|
|
|
|
splx(s);
|
|
}
|
|
|
|
void
|
|
ieee80211_iterate_nodes(struct ieee80211com *ic, ieee80211_iter_func *f,
|
|
void *arg)
|
|
{
|
|
struct ieee80211_node *ni;
|
|
int s;
|
|
|
|
s = splnet();
|
|
RBT_FOREACH(ni, ieee80211_tree, &ic->ic_tree)
|
|
(*f)(arg, ni);
|
|
splx(s);
|
|
}
|
|
|
|
|
|
/*
|
|
* Install received HT caps information in the node's state block.
|
|
*/
|
|
void
|
|
ieee80211_setup_htcaps(struct ieee80211_node *ni, const uint8_t *data,
|
|
uint8_t len)
|
|
{
|
|
uint16_t rxrate;
|
|
|
|
if (len != 26)
|
|
return;
|
|
|
|
ni->ni_htcaps = (data[0] | (data[1] << 8));
|
|
ni->ni_ampdu_param = data[2];
|
|
|
|
memcpy(ni->ni_rxmcs, &data[3], sizeof(ni->ni_rxmcs));
|
|
/* clear reserved bits */
|
|
clrbit(ni->ni_rxmcs, 77);
|
|
clrbit(ni->ni_rxmcs, 78);
|
|
clrbit(ni->ni_rxmcs, 79);
|
|
|
|
/* Max MCS Rx rate in 1Mb/s units (0 means "not specified"). */
|
|
rxrate = ((data[13] | (data[14]) << 8) & IEEE80211_MCS_RX_RATE_HIGH);
|
|
if (rxrate < 1024)
|
|
ni->ni_max_rxrate = rxrate;
|
|
|
|
ni->ni_tx_mcs_set = data[15];
|
|
ni->ni_htxcaps = (data[19] | (data[20] << 8));
|
|
ni->ni_txbfcaps = (data[21] | (data[22] << 8) | (data[23] << 16) |
|
|
(data[24] << 24));
|
|
ni->ni_aselcaps = data[25];
|
|
|
|
ni->ni_flags |= IEEE80211_NODE_HTCAP;
|
|
}
|
|
|
|
#ifndef IEEE80211_STA_ONLY
|
|
/*
|
|
* Handle nodes switching from 11n into legacy modes.
|
|
*/
|
|
void
|
|
ieee80211_clear_htcaps(struct ieee80211_node *ni)
|
|
{
|
|
ni->ni_htcaps = 0;
|
|
ni->ni_ampdu_param = 0;
|
|
memset(ni->ni_rxmcs, 0, sizeof(ni->ni_rxmcs));
|
|
ni->ni_max_rxrate = 0;
|
|
ni->ni_tx_mcs_set = 0;
|
|
ni->ni_htxcaps = 0;
|
|
ni->ni_txbfcaps = 0;
|
|
ni->ni_aselcaps = 0;
|
|
|
|
ni->ni_flags &= ~(IEEE80211_NODE_HT | IEEE80211_NODE_HT_SGI20 |
|
|
IEEE80211_NODE_HT_SGI40 | IEEE80211_NODE_HTCAP);
|
|
|
|
}
|
|
#endif
|
|
|
|
int
|
|
ieee80211_40mhz_valid_secondary_above(uint8_t primary_chan)
|
|
{
|
|
static const uint8_t valid_secondary_chan[] = {
|
|
5, 6, 7, 8, 9, 10, 11, 12, 13,
|
|
40, 48, 56, 64, 104, 112, 120, 128, 136, 144, 153, 161
|
|
};
|
|
uint8_t secondary_chan;
|
|
int i;
|
|
|
|
if ((primary_chan >= 1 && primary_chan <= 9) ||
|
|
(primary_chan >= 36 && primary_chan <= 157))
|
|
secondary_chan = primary_chan + 4;
|
|
else
|
|
return 0;
|
|
|
|
for (i = 0; i < nitems(valid_secondary_chan); i++) {
|
|
if (secondary_chan == valid_secondary_chan[i])
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
ieee80211_40mhz_valid_secondary_below(uint8_t primary_chan)
|
|
{
|
|
static const uint8_t valid_secondary_chan[] = {
|
|
1, 2, 3, 4, 5, 6, 7, 8, 9,
|
|
36, 44, 52, 60, 100, 108, 116, 124, 132, 140, 149, 157
|
|
};
|
|
int8_t secondary_chan;
|
|
int i;
|
|
|
|
if ((primary_chan >= 5 && primary_chan <= 13) ||
|
|
(primary_chan >= 40 && primary_chan <= 161))
|
|
secondary_chan = primary_chan - 4;
|
|
else
|
|
return 0;
|
|
|
|
for (i = 0; i < nitems(valid_secondary_chan); i++) {
|
|
if (secondary_chan == valid_secondary_chan[i])
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Only accept 40 MHz channel configurations that conform to
|
|
* regulatory operating classes as defined by the 802.11ac spec.
|
|
* Passing other configurations down to firmware can result in
|
|
* regulatory assertions being trigged, such as fatal firmware
|
|
* error 14FD in iwm(4).
|
|
*
|
|
* See 802.11ac 2013, page 380, Tables E-1 to E-5.
|
|
*/
|
|
int
|
|
ieee80211_40mhz_center_freq_valid(uint8_t primary_chan, uint8_t htop0)
|
|
{
|
|
uint8_t sco;
|
|
|
|
sco = ((htop0 & IEEE80211_HTOP0_SCO_MASK) >> IEEE80211_HTOP0_SCO_SHIFT);
|
|
switch (sco) {
|
|
case IEEE80211_HTOP0_SCO_SCN:
|
|
return 1;
|
|
case IEEE80211_HTOP0_SCO_SCA:
|
|
return ieee80211_40mhz_valid_secondary_above(primary_chan);
|
|
case IEEE80211_HTOP0_SCO_SCB:
|
|
return ieee80211_40mhz_valid_secondary_below(primary_chan);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Install received HT op information in the node's state block.
|
|
*/
|
|
int
|
|
ieee80211_setup_htop(struct ieee80211_node *ni, const uint8_t *data,
|
|
uint8_t len, int isprobe)
|
|
{
|
|
if (len != 22)
|
|
return 0;
|
|
|
|
ni->ni_primary_chan = data[0]; /* corresponds to ni_chan */
|
|
ni->ni_htop0 = data[1];
|
|
if (!ieee80211_40mhz_center_freq_valid(data[0], data[1]))
|
|
ni->ni_htop0 &= ~IEEE80211_HTOP0_SCO_MASK;
|
|
ni->ni_htop1 = (data[2] | (data[3] << 8));
|
|
ni->ni_htop2 = (data[3] | (data[4] << 8));
|
|
|
|
/*
|
|
* According to 802.11-2012 Table 8-130 the Basic MCS set is
|
|
* only "present in Beacon, Probe Response, Mesh Peering Open
|
|
* and Mesh Peering Confirm frames. Otherwise reserved."
|
|
*/
|
|
if (isprobe)
|
|
memcpy(ni->ni_basic_mcs, &data[6], sizeof(ni->ni_basic_mcs));
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Install received VHT caps information in the node's state block.
|
|
*/
|
|
void
|
|
ieee80211_setup_vhtcaps(struct ieee80211_node *ni, const uint8_t *data,
|
|
uint8_t len)
|
|
{
|
|
if (len != 12)
|
|
return;
|
|
|
|
ni->ni_vhtcaps = (data[0] | (data[1] << 8) | data[2] << 16 |
|
|
data[3] << 24);
|
|
ni->ni_vht_rxmcs = (data[4] | (data[5] << 8));
|
|
ni->ni_vht_rx_max_lgi_mbit_s = ((data[6] | (data[7] << 8)) &
|
|
IEEE80211_VHT_MAX_LGI_MBIT_S_MASK);
|
|
ni->ni_vht_txmcs = (data[8] | (data[9] << 8));
|
|
ni->ni_vht_tx_max_lgi_mbit_s = ((data[10] | (data[11] << 8)) &
|
|
IEEE80211_VHT_MAX_LGI_MBIT_S_MASK);
|
|
|
|
ni->ni_flags |= IEEE80211_NODE_VHTCAP;
|
|
}
|
|
|
|
/*
|
|
* Only accept 80 MHz channel configurations that conform to
|
|
* regulatory operating classes as defined by the 802.11ac spec.
|
|
* Passing other configurations down to firmware can result in
|
|
* regulatory assertions being trigged, such as fatal firmware
|
|
* error 14FD in iwm(4).
|
|
*
|
|
* See 802.11ac 2013, page 380, Tables E-1 to E-5.
|
|
*/
|
|
int
|
|
ieee80211_80mhz_center_freq_valid(const uint8_t chanidx)
|
|
{
|
|
static const uint8_t valid_center_chanidx[] = {
|
|
42, 50, 58, 106, 112, 114, 138, 155
|
|
};
|
|
int i;
|
|
|
|
for (i = 0; i < nitems(valid_center_chanidx); i++) {
|
|
if (chanidx == valid_center_chanidx[i])
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Install received VHT op information in the node's state block.
|
|
*/
|
|
int
|
|
ieee80211_setup_vhtop(struct ieee80211_node *ni, const uint8_t *data,
|
|
uint8_t len, int isprobe)
|
|
{
|
|
uint8_t sco;
|
|
int have_40mhz;
|
|
|
|
if (len != 5)
|
|
return 0;
|
|
|
|
if (data[0] != IEEE80211_VHTOP0_CHAN_WIDTH_HT &&
|
|
data[0] != IEEE80211_VHTOP0_CHAN_WIDTH_80 &&
|
|
data[0] != IEEE80211_VHTOP0_CHAN_WIDTH_160 &&
|
|
data[0] != IEEE80211_VHTOP0_CHAN_WIDTH_8080)
|
|
return 0;
|
|
|
|
sco = ((ni->ni_htop0 & IEEE80211_HTOP0_SCO_MASK) >>
|
|
IEEE80211_HTOP0_SCO_SHIFT);
|
|
have_40mhz = (sco == IEEE80211_HTOP0_SCO_SCA ||
|
|
sco == IEEE80211_HTOP0_SCO_SCB);
|
|
|
|
if (have_40mhz && ieee80211_80mhz_center_freq_valid(data[1])) {
|
|
ni->ni_vht_chan_width = data[0];
|
|
ni->ni_vht_chan_center_freq_idx0 = data[1];
|
|
|
|
/* Only used in non-consecutive 80-80 160MHz configs. */
|
|
if (data[2] && ieee80211_80mhz_center_freq_valid(data[2]))
|
|
ni->ni_vht_chan_center_freq_idx1 = data[2];
|
|
else
|
|
ni->ni_vht_chan_center_freq_idx1 = 0;
|
|
} else {
|
|
ni->ni_vht_chan_width = IEEE80211_VHTOP0_CHAN_WIDTH_HT;
|
|
ni->ni_vht_chan_center_freq_idx0 = 0;
|
|
ni->ni_vht_chan_center_freq_idx1 = 0;
|
|
}
|
|
|
|
ni->ni_vht_basic_mcs = (data[3] | data[4] << 8);
|
|
return 1;
|
|
}
|
|
|
|
#ifndef IEEE80211_STA_ONLY
|
|
/*
|
|
* Handle nodes switching from 11ac into legacy modes.
|
|
*/
|
|
void
|
|
ieee80211_clear_vhtcaps(struct ieee80211_node *ni)
|
|
{
|
|
ni->ni_vhtcaps = 0;
|
|
ni->ni_vht_rxmcs = 0;
|
|
ni->ni_vht_rx_max_lgi_mbit_s = 0;
|
|
ni->ni_vht_txmcs = 0;
|
|
ni->ni_vht_tx_max_lgi_mbit_s = 0;
|
|
|
|
ni->ni_flags &= ~(IEEE80211_NODE_VHT | IEEE80211_NODE_VHT_SGI80 |
|
|
IEEE80211_NODE_VHT_SGI160 | IEEE80211_NODE_VHTCAP);
|
|
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Install received rate set information in the node's state block.
|
|
*/
|
|
int
|
|
ieee80211_setup_rates(struct ieee80211com *ic, struct ieee80211_node *ni,
|
|
const u_int8_t *rates, const u_int8_t *xrates, int flags)
|
|
{
|
|
struct ieee80211_rateset *rs = &ni->ni_rates;
|
|
|
|
memset(rs, 0, sizeof(*rs));
|
|
rs->rs_nrates = rates[1];
|
|
memcpy(rs->rs_rates, rates + 2, rs->rs_nrates);
|
|
if (xrates != NULL) {
|
|
u_int8_t nxrates;
|
|
/*
|
|
* Tack on 11g extended supported rate element.
|
|
*/
|
|
nxrates = xrates[1];
|
|
if (rs->rs_nrates + nxrates > IEEE80211_RATE_MAXSIZE) {
|
|
nxrates = IEEE80211_RATE_MAXSIZE - rs->rs_nrates;
|
|
DPRINTF(("extended rate set too large; "
|
|
"only using %u of %u rates\n",
|
|
nxrates, xrates[1]));
|
|
ic->ic_stats.is_rx_rstoobig++;
|
|
}
|
|
memcpy(rs->rs_rates + rs->rs_nrates, xrates+2, nxrates);
|
|
rs->rs_nrates += nxrates;
|
|
}
|
|
return ieee80211_fix_rate(ic, ni, flags);
|
|
}
|
|
|
|
void
|
|
ieee80211_node_trigger_addba_req(struct ieee80211_node *ni, int tid)
|
|
{
|
|
if (ni->ni_tx_ba[tid].ba_state == IEEE80211_BA_INIT &&
|
|
!timeout_pending(&ni->ni_addba_req_to[tid])) {
|
|
timeout_add_sec(&ni->ni_addba_req_to[tid],
|
|
ni->ni_addba_req_intval[tid]);
|
|
}
|
|
}
|
|
|
|
void
|
|
ieee80211_node_addba_request(struct ieee80211_node *ni, int tid)
|
|
{
|
|
struct ieee80211com *ic = ni->ni_ic;
|
|
uint16_t ssn = ni->ni_qos_txseqs[tid];
|
|
|
|
ieee80211_addba_request(ic, ni, ssn, tid);
|
|
}
|
|
|
|
void
|
|
ieee80211_node_addba_request_ac_be_to(void *arg)
|
|
{
|
|
struct ieee80211_node *ni = arg;
|
|
ieee80211_node_addba_request(ni, EDCA_AC_BE);
|
|
}
|
|
|
|
void
|
|
ieee80211_node_addba_request_ac_bk_to(void *arg)
|
|
{
|
|
struct ieee80211_node *ni = arg;
|
|
ieee80211_node_addba_request(ni, EDCA_AC_BK);
|
|
}
|
|
|
|
void
|
|
ieee80211_node_addba_request_ac_vi_to(void *arg)
|
|
{
|
|
struct ieee80211_node *ni = arg;
|
|
ieee80211_node_addba_request(ni, EDCA_AC_VI);
|
|
}
|
|
|
|
void
|
|
ieee80211_node_addba_request_ac_vo_to(void *arg)
|
|
{
|
|
struct ieee80211_node *ni = arg;
|
|
ieee80211_node_addba_request(ni, EDCA_AC_VO);
|
|
}
|
|
|
|
#ifndef IEEE80211_STA_ONLY
|
|
/*
|
|
* Check if the specified node supports ERP.
|
|
*/
|
|
int
|
|
ieee80211_iserp_sta(const struct ieee80211_node *ni)
|
|
{
|
|
static const u_int8_t rates[] = { 2, 4, 11, 22, 12, 24, 48 };
|
|
const struct ieee80211_rateset *rs = &ni->ni_rates;
|
|
int i, j;
|
|
|
|
/*
|
|
* A STA supports ERP operation if it includes all the Clause 19
|
|
* mandatory rates in its supported rate set.
|
|
*/
|
|
for (i = 0; i < nitems(rates); i++) {
|
|
for (j = 0; j < rs->rs_nrates; j++) {
|
|
if ((rs->rs_rates[j] & IEEE80211_RATE_VAL) == rates[i])
|
|
break;
|
|
}
|
|
if (j == rs->rs_nrates)
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* This function is called to notify the 802.1X PACP machine that a new
|
|
* 802.1X port is enabled and must be authenticated. For 802.11, a port
|
|
* becomes enabled whenever a STA successfully completes Open System
|
|
* authentication with an AP.
|
|
*/
|
|
void
|
|
ieee80211_needs_auth(struct ieee80211com *ic, struct ieee80211_node *ni)
|
|
{
|
|
/*
|
|
* XXX this could be done via the route socket of via a dedicated
|
|
* EAP socket or another kernel->userland notification mechanism.
|
|
* The notification should include the MAC address (ni_macaddr).
|
|
*/
|
|
}
|
|
|
|
/*
|
|
* Handle an HT STA joining an HT network.
|
|
*/
|
|
void
|
|
ieee80211_node_join_ht(struct ieee80211com *ic, struct ieee80211_node *ni)
|
|
{
|
|
enum ieee80211_htprot;
|
|
|
|
/* Update HT protection setting. */
|
|
if ((ni->ni_flags & IEEE80211_NODE_HT) == 0) {
|
|
uint16_t htop1 = ic->ic_bss->ni_htop1;
|
|
htop1 &= ~IEEE80211_HTOP1_PROT_MASK;
|
|
htop1 |= IEEE80211_HTPROT_NONHT_MIXED;
|
|
ic->ic_bss->ni_htop1 = htop1;
|
|
if (ic->ic_updateprot)
|
|
ic->ic_updateprot(ic);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Handle a station joining an RSN network.
|
|
*/
|
|
void
|
|
ieee80211_node_join_rsn(struct ieee80211com *ic, struct ieee80211_node *ni)
|
|
{
|
|
DPRINTF(("station %s associated using proto %d akm 0x%x "
|
|
"cipher 0x%x groupcipher 0x%x\n", ether_sprintf(ni->ni_macaddr),
|
|
ni->ni_rsnprotos, ni->ni_rsnakms, ni->ni_rsnciphers,
|
|
ni->ni_rsngroupcipher));
|
|
|
|
ni->ni_rsn_state = RSNA_AUTHENTICATION;
|
|
|
|
ni->ni_key_count = 0;
|
|
ni->ni_port_valid = 0;
|
|
ni->ni_flags &= ~IEEE80211_NODE_TXRXPROT;
|
|
ni->ni_flags &= ~IEEE80211_NODE_RSN_NEW_PTK;
|
|
ni->ni_replaycnt = -1; /* XXX */
|
|
ni->ni_rsn_retries = 0;
|
|
ni->ni_rsncipher = ni->ni_rsnciphers;
|
|
|
|
ni->ni_rsn_state = RSNA_AUTHENTICATION_2;
|
|
|
|
/* generate a new authenticator nonce (ANonce) */
|
|
arc4random_buf(ni->ni_nonce, EAPOL_KEY_NONCE_LEN);
|
|
|
|
if (!ieee80211_is_8021x_akm(ni->ni_rsnakms)) {
|
|
memcpy(ni->ni_pmk, ic->ic_psk, IEEE80211_PMK_LEN);
|
|
ni->ni_flags |= IEEE80211_NODE_PMK;
|
|
(void)ieee80211_send_4way_msg1(ic, ni);
|
|
} else if (ni->ni_flags & IEEE80211_NODE_PMK) {
|
|
/* skip 802.1X auth if a cached PMK was found */
|
|
(void)ieee80211_send_4way_msg1(ic, ni);
|
|
} else {
|
|
/* no cached PMK found, needs full 802.1X auth */
|
|
ieee80211_needs_auth(ic, ni);
|
|
}
|
|
}
|
|
|
|
void
|
|
ieee80211_count_longslotsta(void *arg, struct ieee80211_node *ni)
|
|
{
|
|
int *longslotsta = arg;
|
|
|
|
if (ni->ni_associd == 0 || ni->ni_state == IEEE80211_STA_COLLECT)
|
|
return;
|
|
|
|
if (!(ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME))
|
|
(*longslotsta)++;
|
|
}
|
|
|
|
void
|
|
ieee80211_count_nonerpsta(void *arg, struct ieee80211_node *ni)
|
|
{
|
|
int *nonerpsta = arg;
|
|
|
|
if (ni->ni_associd == 0 || ni->ni_state == IEEE80211_STA_COLLECT)
|
|
return;
|
|
|
|
if (!ieee80211_iserp_sta(ni))
|
|
(*nonerpsta)++;
|
|
}
|
|
|
|
void
|
|
ieee80211_count_pssta(void *arg, struct ieee80211_node *ni)
|
|
{
|
|
int *pssta = arg;
|
|
|
|
if (ni->ni_associd == 0 || ni->ni_state == IEEE80211_STA_COLLECT)
|
|
return;
|
|
|
|
if (ni->ni_pwrsave == IEEE80211_PS_DOZE)
|
|
(*pssta)++;
|
|
}
|
|
|
|
void
|
|
ieee80211_count_rekeysta(void *arg, struct ieee80211_node *ni)
|
|
{
|
|
int *rekeysta = arg;
|
|
|
|
if (ni->ni_associd == 0 || ni->ni_state == IEEE80211_STA_COLLECT)
|
|
return;
|
|
|
|
if (ni->ni_flags & IEEE80211_NODE_REKEY)
|
|
(*rekeysta)++;
|
|
}
|
|
|
|
/*
|
|
* Handle a station joining an 11g network.
|
|
*/
|
|
void
|
|
ieee80211_node_join_11g(struct ieee80211com *ic, struct ieee80211_node *ni)
|
|
{
|
|
int longslotsta = 0, nonerpsta = 0;
|
|
|
|
if (!(ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME)) {
|
|
/*
|
|
* Joining STA doesn't support short slot time. We must
|
|
* disable the use of short slot time for all other associated
|
|
* STAs and give the driver a chance to reconfigure the
|
|
* hardware.
|
|
*/
|
|
ieee80211_iterate_nodes(ic,
|
|
ieee80211_count_longslotsta, &longslotsta);
|
|
if (longslotsta == 1) {
|
|
if (ic->ic_caps & IEEE80211_C_SHSLOT)
|
|
ieee80211_set_shortslottime(ic, 0);
|
|
}
|
|
DPRINTF(("[%s] station needs long slot time, count %d\n",
|
|
ether_sprintf(ni->ni_macaddr), longslotsta));
|
|
}
|
|
|
|
if (!ieee80211_iserp_sta(ni)) {
|
|
/*
|
|
* Joining STA is non-ERP.
|
|
*/
|
|
ieee80211_iterate_nodes(ic,
|
|
ieee80211_count_nonerpsta, &nonerpsta);
|
|
DPRINTF(("[%s] station is non-ERP, %d non-ERP "
|
|
"stations associated\n", ether_sprintf(ni->ni_macaddr),
|
|
nonerpsta));
|
|
/* must enable the use of protection */
|
|
if (ic->ic_protmode != IEEE80211_PROT_NONE) {
|
|
DPRINTF(("enable use of protection\n"));
|
|
ic->ic_flags |= IEEE80211_F_USEPROT;
|
|
}
|
|
|
|
if (!(ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_PREAMBLE))
|
|
ic->ic_flags &= ~IEEE80211_F_SHPREAMBLE;
|
|
} else
|
|
ni->ni_flags |= IEEE80211_NODE_ERP;
|
|
}
|
|
|
|
void
|
|
ieee80211_node_join(struct ieee80211com *ic, struct ieee80211_node *ni,
|
|
int resp)
|
|
{
|
|
int newassoc = (ni->ni_state != IEEE80211_STA_ASSOC);
|
|
|
|
if (ni->ni_associd == 0) {
|
|
u_int16_t aid;
|
|
|
|
/*
|
|
* It would be clever to search the bitmap
|
|
* more efficiently, but this will do for now.
|
|
*/
|
|
for (aid = 1; aid < ic->ic_max_aid; aid++) {
|
|
if (!IEEE80211_AID_ISSET(aid,
|
|
ic->ic_aid_bitmap))
|
|
break;
|
|
}
|
|
if (aid >= ic->ic_max_aid) {
|
|
IEEE80211_SEND_MGMT(ic, ni, resp,
|
|
IEEE80211_REASON_ASSOC_TOOMANY);
|
|
ieee80211_node_leave(ic, ni);
|
|
return;
|
|
}
|
|
ni->ni_associd = aid | 0xc000;
|
|
IEEE80211_AID_SET(ni->ni_associd, ic->ic_aid_bitmap);
|
|
if (ic->ic_curmode == IEEE80211_MODE_11G ||
|
|
(ic->ic_curmode == IEEE80211_MODE_11N &&
|
|
IEEE80211_IS_CHAN_2GHZ(ic->ic_bss->ni_chan)))
|
|
ieee80211_node_join_11g(ic, ni);
|
|
}
|
|
|
|
DPRINTF(("station %s %s associated at aid %d\n",
|
|
ether_sprintf(ni->ni_macaddr), newassoc ? "newly" : "already",
|
|
ni->ni_associd & ~0xc000));
|
|
|
|
ieee80211_ht_negotiate(ic, ni);
|
|
if (ic->ic_flags & IEEE80211_F_HTON)
|
|
ieee80211_node_join_ht(ic, ni);
|
|
|
|
/* give driver a chance to setup state like ni_txrate */
|
|
if (ic->ic_newassoc)
|
|
(*ic->ic_newassoc)(ic, ni, newassoc);
|
|
IEEE80211_SEND_MGMT(ic, ni, resp, IEEE80211_STATUS_SUCCESS);
|
|
ieee80211_node_newstate(ni, IEEE80211_STA_ASSOC);
|
|
|
|
if (!(ic->ic_flags & IEEE80211_F_RSNON)) {
|
|
ni->ni_port_valid = 1;
|
|
ni->ni_rsncipher = IEEE80211_CIPHER_USEGROUP;
|
|
} else
|
|
ieee80211_node_join_rsn(ic, ni);
|
|
|
|
#if NBRIDGE > 0
|
|
/*
|
|
* If the parent interface is a bridge port, learn
|
|
* the node's address dynamically on this interface.
|
|
*/
|
|
if (ic->ic_if.if_bridgeidx != 0)
|
|
bridge_update(&ic->ic_if,
|
|
(struct ether_addr *)ni->ni_macaddr, 0);
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Handle an HT STA leaving an HT network.
|
|
*/
|
|
void
|
|
ieee80211_node_leave_ht(struct ieee80211com *ic, struct ieee80211_node *ni)
|
|
{
|
|
struct ieee80211_rx_ba *ba;
|
|
u_int8_t tid;
|
|
int i;
|
|
|
|
/* free all Block Ack records */
|
|
ieee80211_ba_del(ni);
|
|
for (tid = 0; tid < IEEE80211_NUM_TID; tid++) {
|
|
ba = &ni->ni_rx_ba[tid];
|
|
if (ba->ba_buf != NULL) {
|
|
for (i = 0; i < IEEE80211_BA_MAX_WINSZ; i++)
|
|
m_freem(ba->ba_buf[i].m);
|
|
free(ba->ba_buf, M_DEVBUF,
|
|
IEEE80211_BA_MAX_WINSZ * sizeof(*ba->ba_buf));
|
|
ba->ba_buf = NULL;
|
|
}
|
|
}
|
|
|
|
ieee80211_clear_htcaps(ni);
|
|
}
|
|
|
|
/*
|
|
* Handle a VHT STA leaving a VHT network.
|
|
*/
|
|
void
|
|
ieee80211_node_leave_vht(struct ieee80211com *ic, struct ieee80211_node *ni)
|
|
{
|
|
ieee80211_clear_vhtcaps(ni);
|
|
}
|
|
|
|
/*
|
|
* Handle a station leaving an RSN network.
|
|
*/
|
|
void
|
|
ieee80211_node_leave_rsn(struct ieee80211com *ic, struct ieee80211_node *ni)
|
|
{
|
|
int rekeysta = 0;
|
|
|
|
ni->ni_rsn_state = RSNA_INITIALIZE;
|
|
if (ni->ni_flags & IEEE80211_NODE_REKEY) {
|
|
ni->ni_flags &= ~IEEE80211_NODE_REKEY;
|
|
ieee80211_iterate_nodes(ic,
|
|
ieee80211_count_rekeysta, &rekeysta);
|
|
if (rekeysta == 0)
|
|
ieee80211_setkeysdone(ic);
|
|
}
|
|
ni->ni_flags &= ~IEEE80211_NODE_PMK;
|
|
ni->ni_rsn_gstate = RSNA_IDLE;
|
|
|
|
timeout_del(&ni->ni_eapol_to);
|
|
timeout_del(&ni->ni_sa_query_to);
|
|
|
|
ni->ni_rsn_retries = 0;
|
|
ni->ni_flags &= ~IEEE80211_NODE_TXRXPROT;
|
|
ni->ni_port_valid = 0;
|
|
(*ic->ic_delete_key)(ic, ni, &ni->ni_pairwise_key);
|
|
}
|
|
|
|
/*
|
|
* Handle a station leaving an 11g network.
|
|
*/
|
|
void
|
|
ieee80211_node_leave_11g(struct ieee80211com *ic, struct ieee80211_node *ni)
|
|
{
|
|
int longslotsta = 0, nonerpsta = 0;
|
|
|
|
if (!(ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME)) {
|
|
/* leaving STA did not support short slot time */
|
|
ieee80211_iterate_nodes(ic,
|
|
ieee80211_count_longslotsta, &longslotsta);
|
|
if (longslotsta == 1) {
|
|
/*
|
|
* All associated STAs now support short slot time, so
|
|
* enable this feature and give the driver a chance to
|
|
* reconfigure the hardware. Notice that IBSS always
|
|
* use a long slot time.
|
|
*/
|
|
if ((ic->ic_caps & IEEE80211_C_SHSLOT) &&
|
|
ic->ic_opmode != IEEE80211_M_IBSS)
|
|
ieee80211_set_shortslottime(ic, 1);
|
|
}
|
|
DPRINTF(("[%s] long slot time station leaves, count %d\n",
|
|
ether_sprintf(ni->ni_macaddr), longslotsta));
|
|
}
|
|
|
|
if (!(ni->ni_flags & IEEE80211_NODE_ERP)) {
|
|
/* leaving STA was non-ERP */
|
|
ieee80211_iterate_nodes(ic,
|
|
ieee80211_count_nonerpsta, &nonerpsta);
|
|
if (nonerpsta == 1) {
|
|
/*
|
|
* All associated STAs are now ERP capable, disable use
|
|
* of protection and re-enable short preamble support.
|
|
*/
|
|
ic->ic_flags &= ~IEEE80211_F_USEPROT;
|
|
if (ic->ic_caps & IEEE80211_C_SHPREAMBLE)
|
|
ic->ic_flags |= IEEE80211_F_SHPREAMBLE;
|
|
}
|
|
DPRINTF(("[%s] non-ERP station leaves, count %d\n",
|
|
ether_sprintf(ni->ni_macaddr), nonerpsta));
|
|
}
|
|
}
|
|
|
|
void
|
|
ieee80211_node_leave_pwrsave(struct ieee80211com *ic,
|
|
struct ieee80211_node *ni)
|
|
{
|
|
struct mbuf_queue keep = MBUF_QUEUE_INITIALIZER(IFQ_MAXLEN, IPL_NET);
|
|
struct mbuf *m;
|
|
|
|
if (ni->ni_pwrsave == IEEE80211_PS_DOZE)
|
|
ni->ni_pwrsave = IEEE80211_PS_AWAKE;
|
|
|
|
if (mq_len(&ni->ni_savedq) > 0) {
|
|
if (ic->ic_set_tim != NULL)
|
|
(*ic->ic_set_tim)(ic, ni->ni_associd, 0);
|
|
}
|
|
while ((m = mq_dequeue(&ni->ni_savedq)) != NULL) {
|
|
if (ni->ni_refcnt > 0)
|
|
ieee80211_node_decref(ni);
|
|
m_freem(m);
|
|
}
|
|
|
|
/* Purge frames queued for transmission during DTIM. */
|
|
while ((m = mq_dequeue(&ic->ic_pwrsaveq)) != NULL) {
|
|
if (m->m_pkthdr.ph_cookie == ni) {
|
|
if (ni->ni_refcnt > 0)
|
|
ieee80211_node_decref(ni);
|
|
m_freem(m);
|
|
} else
|
|
mq_enqueue(&keep, m);
|
|
}
|
|
while ((m = mq_dequeue(&keep)) != NULL)
|
|
mq_enqueue(&ic->ic_pwrsaveq, m);
|
|
}
|
|
|
|
/*
|
|
* Handle bookkeeping for station deauthentication/disassociation
|
|
* when operating as an ap.
|
|
*/
|
|
void
|
|
ieee80211_node_leave(struct ieee80211com *ic, struct ieee80211_node *ni)
|
|
{
|
|
if (ic->ic_opmode != IEEE80211_M_HOSTAP)
|
|
panic("not in ap mode, mode %u", ic->ic_opmode);
|
|
|
|
if (ni->ni_state == IEEE80211_STA_COLLECT)
|
|
return;
|
|
/*
|
|
* If node wasn't previously associated all we need to do is
|
|
* reclaim the reference.
|
|
*/
|
|
if (ni->ni_associd == 0) {
|
|
ieee80211_node_newstate(ni, IEEE80211_STA_COLLECT);
|
|
return;
|
|
}
|
|
|
|
ieee80211_node_leave_pwrsave(ic, ni);
|
|
|
|
if (ic->ic_flags & IEEE80211_F_RSNON)
|
|
ieee80211_node_leave_rsn(ic, ni);
|
|
|
|
if (ic->ic_curmode == IEEE80211_MODE_11G ||
|
|
(ic->ic_curmode == IEEE80211_MODE_11N &&
|
|
IEEE80211_IS_CHAN_2GHZ(ic->ic_bss->ni_chan)))
|
|
ieee80211_node_leave_11g(ic, ni);
|
|
|
|
if (ni->ni_flags & IEEE80211_NODE_HT)
|
|
ieee80211_node_leave_ht(ic, ni);
|
|
if (ni->ni_flags & IEEE80211_NODE_VHT)
|
|
ieee80211_node_leave_vht(ic, ni);
|
|
|
|
if (ic->ic_node_leave != NULL)
|
|
(*ic->ic_node_leave)(ic, ni);
|
|
|
|
ieee80211_node_newstate(ni, IEEE80211_STA_COLLECT);
|
|
|
|
#if NBRIDGE > 0
|
|
/*
|
|
* If the parent interface is a bridge port, delete
|
|
* any dynamically learned address for this node.
|
|
*/
|
|
if (ic->ic_if.if_bridgeidx != 0)
|
|
bridge_update(&ic->ic_if,
|
|
(struct ether_addr *)ni->ni_macaddr, 1);
|
|
#endif
|
|
}
|
|
|
|
static int
|
|
ieee80211_do_slow_print(struct ieee80211com *ic, int *did_print)
|
|
{
|
|
static const struct timeval merge_print_intvl = {
|
|
.tv_sec = 1, .tv_usec = 0
|
|
};
|
|
if ((ic->ic_if.if_flags & IFF_LINK0) == 0)
|
|
return 0;
|
|
if (!*did_print && (ic->ic_if.if_flags & IFF_DEBUG) == 0 &&
|
|
!ratecheck(&ic->ic_last_merge_print, &merge_print_intvl))
|
|
return 0;
|
|
|
|
*did_print = 1;
|
|
return 1;
|
|
}
|
|
|
|
/* ieee80211_ibss_merge helps merge 802.11 ad hoc networks. The
|
|
* convention, set by the Wireless Ethernet Compatibility Alliance
|
|
* (WECA), is that an 802.11 station will change its BSSID to match
|
|
* the "oldest" 802.11 ad hoc network, on the same channel, that
|
|
* has the station's desired SSID. The "oldest" 802.11 network
|
|
* sends beacons with the greatest TSF timestamp.
|
|
*
|
|
* Return ENETRESET if the BSSID changed, 0 otherwise.
|
|
*
|
|
* XXX Perhaps we should compensate for the time that elapses
|
|
* between the MAC receiving the beacon and the host processing it
|
|
* in ieee80211_ibss_merge.
|
|
*/
|
|
int
|
|
ieee80211_ibss_merge(struct ieee80211com *ic, struct ieee80211_node *ni,
|
|
u_int64_t local_tsft)
|
|
{
|
|
u_int64_t beacon_tsft;
|
|
int did_print = 0, sign;
|
|
union {
|
|
u_int64_t word;
|
|
u_int8_t tstamp[8];
|
|
} u;
|
|
|
|
/* ensure alignment */
|
|
(void)memcpy(&u, &ni->ni_tstamp[0], sizeof(u));
|
|
beacon_tsft = letoh64(u.word);
|
|
|
|
/* we are faster, let the other guy catch up */
|
|
if (beacon_tsft < local_tsft)
|
|
sign = -1;
|
|
else
|
|
sign = 1;
|
|
|
|
if (IEEE80211_ADDR_EQ(ni->ni_bssid, ic->ic_bss->ni_bssid)) {
|
|
if (!ieee80211_do_slow_print(ic, &did_print))
|
|
return 0;
|
|
printf("%s: tsft offset %s%llu\n", ic->ic_if.if_xname,
|
|
(sign < 0) ? "-" : "",
|
|
(sign < 0)
|
|
? (local_tsft - beacon_tsft)
|
|
: (beacon_tsft - local_tsft));
|
|
return 0;
|
|
}
|
|
|
|
if (sign < 0)
|
|
return 0;
|
|
|
|
if (ieee80211_match_bss(ic, ni, 0) != 0)
|
|
return 0;
|
|
|
|
if (ieee80211_do_slow_print(ic, &did_print)) {
|
|
printf("%s: ieee80211_ibss_merge: bssid mismatch %s\n",
|
|
ic->ic_if.if_xname, ether_sprintf(ni->ni_bssid));
|
|
printf("%s: my tsft %llu beacon tsft %llu\n",
|
|
ic->ic_if.if_xname, local_tsft, beacon_tsft);
|
|
printf("%s: sync TSF with %s\n",
|
|
ic->ic_if.if_xname, ether_sprintf(ni->ni_macaddr));
|
|
}
|
|
|
|
ic->ic_flags &= ~IEEE80211_F_SIBSS;
|
|
|
|
/* negotiate rates with new IBSS */
|
|
ieee80211_fix_rate(ic, ni, IEEE80211_F_DOFRATE |
|
|
IEEE80211_F_DONEGO | IEEE80211_F_DODEL);
|
|
if (ni->ni_rates.rs_nrates == 0) {
|
|
if (ieee80211_do_slow_print(ic, &did_print)) {
|
|
printf("%s: rates mismatch, BSSID %s\n",
|
|
ic->ic_if.if_xname, ether_sprintf(ni->ni_bssid));
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
if (ieee80211_do_slow_print(ic, &did_print)) {
|
|
printf("%s: sync BSSID %s -> ",
|
|
ic->ic_if.if_xname, ether_sprintf(ic->ic_bss->ni_bssid));
|
|
printf("%s ", ether_sprintf(ni->ni_bssid));
|
|
printf("(from %s)\n", ether_sprintf(ni->ni_macaddr));
|
|
}
|
|
|
|
ieee80211_node_newstate(ni, IEEE80211_STA_BSS);
|
|
(*ic->ic_node_copy)(ic, ic->ic_bss, ni);
|
|
|
|
return ENETRESET;
|
|
}
|
|
|
|
void
|
|
ieee80211_set_tim(struct ieee80211com *ic, int aid, int set)
|
|
{
|
|
if (set)
|
|
setbit(ic->ic_tim_bitmap, aid & ~0xc000);
|
|
else
|
|
clrbit(ic->ic_tim_bitmap, aid & ~0xc000);
|
|
}
|
|
|
|
/*
|
|
* This function shall be called by drivers immediately after every DTIM.
|
|
* Transmit all group addressed MSDUs buffered at the AP.
|
|
*/
|
|
void
|
|
ieee80211_notify_dtim(struct ieee80211com *ic)
|
|
{
|
|
/* NB: group addressed MSDUs are buffered in ic_bss */
|
|
struct ieee80211_node *ni = ic->ic_bss;
|
|
struct ifnet *ifp = &ic->ic_if;
|
|
struct ieee80211_frame *wh;
|
|
struct mbuf *m;
|
|
|
|
KASSERT(ic->ic_opmode == IEEE80211_M_HOSTAP);
|
|
|
|
while ((m = mq_dequeue(&ni->ni_savedq)) != NULL) {
|
|
if (!mq_empty(&ni->ni_savedq)) {
|
|
/* more queued frames, set the more data bit */
|
|
wh = mtod(m, struct ieee80211_frame *);
|
|
wh->i_fc[1] |= IEEE80211_FC1_MORE_DATA;
|
|
}
|
|
mq_enqueue(&ic->ic_pwrsaveq, m);
|
|
if_start(ifp);
|
|
}
|
|
/* XXX assumes everything has been sent */
|
|
ic->ic_tim_mcast_pending = 0;
|
|
}
|
|
#endif /* IEEE80211_STA_ONLY */
|
|
|
|
/*
|
|
* Compare nodes in the tree by lladdr
|
|
*/
|
|
int
|
|
ieee80211_node_cmp(const struct ieee80211_node *b1,
|
|
const struct ieee80211_node *b2)
|
|
{
|
|
return (memcmp(b1->ni_macaddr, b2->ni_macaddr, IEEE80211_ADDR_LEN));
|
|
}
|
|
|
|
/*
|
|
* Compare nodes in the tree by essid
|
|
*/
|
|
int
|
|
ieee80211_ess_cmp(const struct ieee80211_ess_rbt *b1,
|
|
const struct ieee80211_ess_rbt *b2)
|
|
{
|
|
return (memcmp(b1->essid, b2->essid, IEEE80211_NWID_LEN));
|
|
}
|
|
|
|
/*
|
|
* Generate red-black tree function logic
|
|
*/
|
|
RBT_GENERATE(ieee80211_tree, ieee80211_node, ni_node, ieee80211_node_cmp);
|
|
RBT_GENERATE(ieee80211_ess_tree, ieee80211_ess_rbt, ess_rbt, ieee80211_ess_cmp);
|