SecBSD/src
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
12ef7bd342
src/sys/dev/ic/ufshci.c

1774 lines
50 KiB
C
Raw Blame History

/* $OpenBSD: ufshci.c,v 1.9 2024/01/06 17:47:43 mglocker Exp $ */
/*
* Copyright (c) 2022 Marcus Glocker <mglocker@openbsd.org>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
/*
* Universal Flash Storage Host Controller Interface (UFSHCI) 2.1 driver based
* on the JEDEC JESD223C.pdf and JESD220C-2_1.pdf specifications.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/buf.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/device.h>
#include <sys/queue.h>
#include <sys/mutex.h>
#include <sys/pool.h>
#include <sys/atomic.h>
#include <machine/bus.h>
#include <scsi/scsi_all.h>
#include <scsi/scsi_disk.h>
#include <scsi/scsiconf.h>
#include <dev/ic/ufshcivar.h>
#include <dev/ic/ufshcireg.h>
//#define UFSHCI_DEBUG 1
#ifdef UFSHCI_DEBUG
int ufshci_dbglvl = 1;
#define DPRINTF(x...) do { printf(x); } while (0)
#else
#define DPRINTF(x...)
#endif
struct cfdriver ufshci_cd = {
NULL, "ufshci", DV_DULL
};
int ufshci_reset(struct ufshci_softc *);
int ufshci_uccs_poll(struct ufshci_softc *);
struct ufshci_dmamem *ufshci_dmamem_alloc(struct ufshci_softc *, size_t);
void ufshci_dmamem_free(struct ufshci_softc *,
struct ufshci_dmamem *);
int ufshci_init(struct ufshci_softc *);
int ufshci_doorbell_get_free(struct ufshci_softc *);
int ufshci_doorbell_read(struct ufshci_softc *);
int ufshci_doorbell_poll(struct ufshci_softc *, int);
void ufshci_doorbell_set(struct ufshci_softc *, int);
uint8_t ufshci_get_taskid(struct ufshci_softc *);
int ufshci_utr_cmd_nop(struct ufshci_softc *);
int ufshci_utr_cmd_lun(struct ufshci_softc *,
struct ufshci_ccb *, struct scsi_xfer *);
int ufshci_utr_cmd_inquiry(struct ufshci_softc *,
struct ufshci_ccb *, struct scsi_xfer *);
int ufshci_utr_cmd_capacity16(struct ufshci_softc *,
struct ufshci_ccb *, struct scsi_xfer *);
int ufshci_utr_cmd_capacity(struct ufshci_softc *,
struct ufshci_ccb *, struct scsi_xfer *);
int ufshci_utr_cmd_io(struct ufshci_softc *,
struct ufshci_ccb *, struct scsi_xfer *, int);
int ufshci_utr_cmd_sync(struct ufshci_softc *,
struct ufshci_ccb *, struct scsi_xfer *,
uint32_t, uint16_t);
int ufshci_xfer_complete(struct ufshci_softc *);
/* SCSI */
int ufshci_ccb_alloc(struct ufshci_softc *, int);
void *ufshci_ccb_get(void *);
void ufshci_ccb_put(void *, void *);
void ufshci_ccb_free(struct ufshci_softc*, int);
void ufshci_scsi_cmd(struct scsi_xfer *);
void ufshci_minphys(struct buf *, struct scsi_link *);
int ufshci_scsi_probe(struct scsi_link *);
void ufshci_scsi_free(struct scsi_link *);
void ufshci_scsi_inquiry(struct scsi_xfer *);
void ufshci_scsi_capacity16(struct scsi_xfer *);
void ufshci_scsi_capacity(struct scsi_xfer *);
void ufshci_scsi_sync(struct scsi_xfer *);
void ufshci_scsi_io(struct scsi_xfer *, int);
void ufshci_scsi_io_done(struct ufshci_softc *,
struct ufshci_ccb *);
void ufshci_scsi_done(struct ufshci_softc *,
struct ufshci_ccb *);
const struct scsi_adapter ufshci_switch = {
ufshci_scsi_cmd, NULL, NULL, NULL, NULL
};
int
ufshci_intr(void *arg)
{
struct ufshci_softc *sc = arg;
uint32_t status;
int handled = 0;
status = UFSHCI_READ_4(sc, UFSHCI_REG_IS);
DPRINTF("%s: status=0x%08x\n", __func__, status);
if (status == 0)
return 0;
if (status & UFSHCI_REG_IS_UCCS) {
DPRINTF("%s: UCCS interrupt\n", __func__);
handled = 1;
}
if (status & UFSHCI_REG_IS_UTRCS) {
DPRINTF("%s: UTRCS interrupt\n", __func__);
ufshci_xfer_complete(sc);
/* Reset Interrupt Aggregation Counter and Timer. */
UFSHCI_WRITE_4(sc, UFSHCI_REG_UTRIACR,
UFSHCI_REG_UTRIACR_IAEN | UFSHCI_REG_UTRIACR_CTR);
handled = 1;
}
if (handled == 0) {
printf("%s: UNKNOWN interrupt, status=0x%08x\n",
sc->sc_dev.dv_xname, status);
}
/* ACK interrupt */
UFSHCI_WRITE_4(sc, UFSHCI_REG_IS, status);
return 1;
}
int
ufshci_attach(struct ufshci_softc *sc)
{
struct scsibus_attach_args saa;
mtx_init(&sc->sc_ccb_mtx, IPL_BIO);
SIMPLEQ_INIT(&sc->sc_ccb_list);
scsi_iopool_init(&sc->sc_iopool, sc, ufshci_ccb_get, ufshci_ccb_put);
ufshci_reset(sc);
sc->sc_ver = UFSHCI_READ_4(sc, UFSHCI_REG_VER);
printf(", UFSHCI %d.%d%d\n",
UFSHCI_REG_VER_MAJOR(sc->sc_ver),
UFSHCI_REG_VER_MINOR(sc->sc_ver),
UFSHCI_REG_VER_SUFFIX(sc->sc_ver));
sc->sc_cap = UFSHCI_READ_4(sc, UFSHCI_REG_CAP);
sc->sc_hcpid = UFSHCI_READ_4(sc, UFSHCI_REG_HCPID);
sc->sc_hcmid = UFSHCI_READ_4(sc, UFSHCI_REG_HCMID);
sc->sc_nutmrs = UFSHCI_REG_CAP_NUTMRS(sc->sc_cap) + 1;
sc->sc_rtt = UFSHCI_REG_CAP_RTT(sc->sc_cap) + 1;
sc->sc_nutrs = UFSHCI_REG_CAP_NUTRS(sc->sc_cap) + 1;
#if UFSHCI_DEBUG
printf("Capabilities (0x%08x):\n", sc->sc_cap);
printf(" CS=%d\n", sc->sc_cap & UFSHCI_REG_CAP_CS ? 1 : 0);
printf(" UICDMETMS=%d\n",
sc->sc_cap & UFSHCI_REG_CAP_UICDMETMS ? 1 : 0);
printf(" OODDS=%d\n", sc->sc_cap & UFSHCI_REG_CAP_OODDS ? 1 : 0);
printf(" 64AS=%d\n", sc->sc_cap & UFSHCI_REG_CAP_64AS ? 1 : 0);
printf(" AUTOH8=%d\n", sc->sc_cap & UFSHCI_REG_AUTOH8 ? 1 : 0);
printf(" NUTMRS=%d\n", sc->sc_nutmrs);
printf(" RTT=%d\n", sc->sc_rtt);
printf(" NUTRS=%d\n", sc->sc_nutrs);
printf("HCPID=0x%08x:\n", sc->sc_hcpid);
printf("HCMID (0x%08x):\n", sc->sc_hcmid);
printf(" BI=0x%04x\n", UFSHCI_REG_HCMID_BI(sc->sc_hcmid));
printf(" MIC=0x%04x\n", UFSHCI_REG_HCMID_MIC(sc->sc_hcmid));
#endif
if (sc->sc_nutrs > 32) {
printf("%s: NUTRS can't be >32 (is %d)!\n",
sc->sc_dev.dv_xname, sc->sc_nutrs);
return 1;
}
ufshci_init(sc);
if (ufshci_ccb_alloc(sc, sc->sc_nutrs) != 0) {
printf("%s: %s: Can't allocate CCBs\n",
sc->sc_dev.dv_xname, __func__);
return 1;
}
/* Attach to SCSI layer */
saa.saa_adapter = &ufshci_switch;
saa.saa_adapter_softc = sc;
saa.saa_adapter_buswidth = 2; /* XXX: What's the right value? */
saa.saa_luns = 1; /* XXX: Should we use ufshci_utr_cmd_lun() */
saa.saa_adapter_target = 0;
saa.saa_openings = sc->sc_nutrs;
saa.saa_pool = &sc->sc_iopool;
saa.saa_quirks = saa.saa_flags = 0;
saa.saa_wwpn = saa.saa_wwnn = 0;
config_found(&sc->sc_dev, &saa, scsiprint);
return 0;
}
int
ufshci_reset(struct ufshci_softc *sc)
{
int i;
int retry = 10;
uint32_t hce;
/*
* 7.1.1 Host Controller Initialization: 2)
* Reset and enable host controller
*/
UFSHCI_WRITE_4(sc, UFSHCI_REG_HCE, UFSHCI_REG_HCE_HCE);
/* 7.1.1 Host Controller Initialization: 3) */
for (i = 0; i < retry; i++) {
hce = UFSHCI_READ_4(sc, UFSHCI_REG_HCE);
if (hce == 1)
break;
delay(1);
}
if (i == retry) {
printf("%s: Enabling Host Controller failed!\n",
sc->sc_dev.dv_xname);
return -1;
}
DPRINTF("\n%s: Host Controller enabled (i=%d)\n", __func__, i);
return 0;
}
int
ufshci_uccs_poll(struct ufshci_softc *sc)
{
uint32_t status;
int i, retry = 25;
DPRINTF("%s\n", __func__);
for (i = 0; i < retry; i++) {
status = UFSHCI_READ_4(sc, UFSHCI_REG_IS);
if (status & UFSHCI_REG_IS_UCCS)
break;
delay(10);
}
if (i == retry) {
printf("%s: %s: timeout\n", sc->sc_dev.dv_xname, __func__);
return -1;
}
DPRINTF("%s: completed after %d retries\n", __func__, i);
/* ACK interrupt */
UFSHCI_WRITE_4(sc, UFSHCI_REG_IS, status);
return 0;
}
struct ufshci_dmamem *
ufshci_dmamem_alloc(struct ufshci_softc *sc, size_t size)
{
struct ufshci_dmamem *udm;
int nsegs;
udm = malloc(sizeof(*udm), M_DEVBUF, M_WAITOK | M_ZERO);
if (udm == NULL)
return NULL;
udm->udm_size = size;
if (bus_dmamap_create(sc->sc_dmat, size, 1, size, 0,
BUS_DMA_WAITOK | BUS_DMA_ALLOCNOW | BUS_DMA_64BIT,
&udm->udm_map) != 0)
goto udmfree;
if (bus_dmamem_alloc(sc->sc_dmat, size, PAGE_SIZE, 0, &udm->udm_seg,
1, &nsegs, BUS_DMA_WAITOK | BUS_DMA_ZERO) != 0)
goto destroy;
if (bus_dmamem_map(sc->sc_dmat, &udm->udm_seg, nsegs, size,
&udm->udm_kva, BUS_DMA_WAITOK) != 0)
goto free;
if (bus_dmamap_load(sc->sc_dmat, udm->udm_map, udm->udm_kva, size,
NULL, BUS_DMA_WAITOK) != 0)
goto unmap;
DPRINTF("%s: size=%lu, page_size=%d, nsegs=%d\n",
__func__, size, PAGE_SIZE, nsegs);
return udm;
unmap:
bus_dmamem_unmap(sc->sc_dmat, udm->udm_kva, size);
free:
bus_dmamem_free(sc->sc_dmat, &udm->udm_seg, 1);
destroy:
bus_dmamap_destroy(sc->sc_dmat, udm->udm_map);
udmfree:
free(udm, M_DEVBUF, sizeof(*udm));
return NULL;
}
void
ufshci_dmamem_free(struct ufshci_softc *sc, struct ufshci_dmamem *udm)
{
bus_dmamap_unload(sc->sc_dmat, udm->udm_map);
bus_dmamem_unmap(sc->sc_dmat, udm->udm_kva, udm->udm_size);
bus_dmamem_free(sc->sc_dmat, &udm->udm_seg, 1);
bus_dmamap_destroy(sc->sc_dmat, udm->udm_map);
free(udm, M_DEVBUF, sizeof(*udm));
}
int
ufshci_init(struct ufshci_softc *sc)
{
uint32_t reg;
uint64_t dva;
/*
* 7.1.1 Host Controller Initialization: 4)
* TODO: Do we need to set DME_SET?
*/
/* 7.1.1 Host Controller Initialization: 5) */
//UFSHCI_WRITE_4(sc, UFSHCI_REG_IE, UFSHCI_REG_IE_UCCE |
UFSHCI_WRITE_4(sc, UFSHCI_REG_IE,
UFSHCI_REG_IE_UTRCE | UFSHCI_REG_IE_UTMRCE);
/* 7.1.1 Host Controller Initialization: 6) */
UFSHCI_WRITE_4(sc, UFSHCI_REG_UICCMD,
UFSHCI_REG_UICCMD_CMDOP_DME_LINKSTARTUP);
if (ufshci_uccs_poll(sc) != 0)
return -1;
/*
* 7.1.1 Host Controller Initialization: 7), 8), 9)
* TODO: Implement retry in case UFSHCI_REG_HCS returns 0
*/
reg = UFSHCI_READ_4(sc, UFSHCI_REG_HCS);
if (reg & UFSHCI_REG_HCS_DP)
DPRINTF("%s: Device Presence SET\n", __func__);
else
DPRINTF("%s: Device Presence NOT SET\n", __func__);
/*
* 7.1.1 Host Controller Initialization: 10)
* TODO: Enable additional interrupt on the IE register
*/
/* 7.1.1 Host Controller Initialization: 11) */
reg = UFSHCI_READ_4(sc, UFSHCI_REG_UTRIACR);
DPRINTF("%s: UTRIACR=0x%08x\n", __func__, reg);
/*
* Only enable interrupt aggregation when interrupts are available.
* Otherwise, the interrupt aggregation counter already starts to
* count completed commands, and will keep interrupts disabled once
* reaching the threshold. We only issue the interrupt aggregation
* counter reset in the interrupt handler during runtime, so we would
* have a kind of chicken/egg problem.
*/
if (!cold) {
DPRINTF("%s: Enable interrupt aggregation\n", __func__);
UFSHCI_WRITE_4(sc, UFSHCI_REG_UTRIACR,
UFSHCI_REG_UTRIACR_IAEN |
UFSHCI_REG_UTRIACR_IAPWEN |
UFSHCI_REG_UTRIACR_CTR |
UFSHCI_REG_UTRIACR_IACTH(UFSHCI_INTR_AGGR_COUNT) |
UFSHCI_REG_UTRIACR_IATOVAL(UFSHCI_INTR_AGGR_TIMEOUT));
sc->sc_intraggr_enabled = 1;
}
/*
* 7.1.1 Host Controller Initialization: 12)
* TODO: More UIC commands to issue?
*/
/* 7.1.1 Host Controller Initialization: 13) */
sc->sc_dmamem_utmrd = ufshci_dmamem_alloc(sc,
sizeof(struct ufshci_utmrd) * sc->sc_nutmrs);
if (sc->sc_dmamem_utmrd == NULL) {
printf("%s: Can't allocate DMA memory for UTMRD\n",
sc->sc_dev.dv_xname);
return -1;
}
/* 7.1.1 Host Controller Initialization: 14) */
dva = UFSHCI_DMA_DVA(sc->sc_dmamem_utmrd);
DPRINTF("%s: utmrd dva=%llu\n", __func__, dva);
UFSHCI_WRITE_4(sc, UFSHCI_REG_UTMRLBA, (uint32_t)dva);
UFSHCI_WRITE_4(sc, UFSHCI_REG_UTMRLBAU, (uint32_t)(dva >> 32));
/* 7.1.1 Host Controller Initialization: 15) */
sc->sc_dmamem_utrd = ufshci_dmamem_alloc(sc,
sizeof(struct ufshci_utrd) * sc->sc_nutrs);
if (sc->sc_dmamem_utrd == NULL) {
printf("%s: Can't allocate DMA memory for UTRD\n",
sc->sc_dev.dv_xname);
return -1;
}
/* 7.1.1 Host Controller Initialization: 16) */
dva = UFSHCI_DMA_DVA(sc->sc_dmamem_utrd);
DPRINTF("%s: utrd dva=%llu\n", __func__, dva);
UFSHCI_WRITE_4(sc, UFSHCI_REG_UTRLBA, (uint32_t)dva);
UFSHCI_WRITE_4(sc, UFSHCI_REG_UTRLBAU, (uint32_t)(dva >> 32));
/* Allocate UCDs. */
sc->sc_dmamem_ucd = ufshci_dmamem_alloc(sc,
sizeof(struct ufshci_ucd) * sc->sc_nutrs);
if (sc->sc_dmamem_ucd == NULL) {
printf("%s: Can't allocate DMA memory for UCD\n",
sc->sc_dev.dv_xname);
return -1;
}
/* 7.1.1 Host Controller Initialization: 17) */
UFSHCI_WRITE_4(sc, UFSHCI_REG_UTMRLRSR, UFSHCI_REG_UTMRLRSR_START);
/* 7.1.1 Host Controller Initialization: 18) */
UFSHCI_WRITE_4(sc, UFSHCI_REG_UTRLRSR, UFSHCI_REG_UTRLRSR_START);
/* 7.1.1 Host Controller Initialization: 19) */
/* TODO: bMaxNumOfRTT will be set as the minimum value of
* bDeviceRTTCap and NORTT. ???
*/
return 0;
}
int
ufshci_doorbell_get_free(struct ufshci_softc *sc)
{
int slot;
uint32_t reg;
reg = UFSHCI_READ_4(sc, UFSHCI_REG_UTRLDBR);
for (slot = 0; slot < sc->sc_nutrs; slot++) {
if ((reg & (1 << slot)) == 0)
return slot;
}
return -1;
}
int
ufshci_doorbell_read(struct ufshci_softc *sc)
{
uint32_t reg;
reg = UFSHCI_READ_4(sc, UFSHCI_REG_UTRLDBR);
return reg;
}
int
ufshci_doorbell_poll(struct ufshci_softc *sc, int slot)
{
uint32_t reg;
int i, retry = 25;
DPRINTF("%s\n", __func__);
for (i = 0; i < retry; i++) {
reg = UFSHCI_READ_4(sc, UFSHCI_REG_UTRLDBR);
if ((reg & (1 << slot)) == 0)
break;
delay(10);
}
if (i == retry) {
printf("%s: %s: timeout\n", sc->sc_dev.dv_xname, __func__);
return -1;
}
return 0;
}
void
ufshci_doorbell_set(struct ufshci_softc *sc, int slot)
{
uint32_t reg;
reg = (1 << slot);
UFSHCI_WRITE_4(sc, UFSHCI_REG_UTRLDBR, reg);
}
uint8_t
ufshci_get_taskid(struct ufshci_softc *sc)
{
if (sc->sc_taskid == 255)
sc->sc_taskid = 0;
else
sc->sc_taskid++;
return sc->sc_taskid;
}
int
ufshci_utr_cmd_nop(struct ufshci_softc *sc)
{
int slot, off, len;
uint64_t dva;
struct ufshci_utrd *utrd;
struct ufshci_ucd *ucd;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 1) */
slot = ufshci_doorbell_get_free(sc);
utrd = UFSHCI_DMA_KVA(sc->sc_dmamem_utrd) + (sizeof(*utrd) * slot);
memset(utrd, 0, sizeof(*utrd));
DPRINTF("%s: slot=%d\n", __func__, slot);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2a) */
utrd->dw0 = UFSHCI_UTRD_DW0_CT_UFS;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2b) */
utrd->dw0 |= UFSHCI_UTRD_DW0_DD_NO;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2c) */
utrd->dw0 |= UFSHCI_UTRD_DW0_I_INT;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2d) */
utrd->dw2 = UFSHCI_UTRD_DW2_OCS_IOV;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2e) */
ucd = UFSHCI_DMA_KVA(sc->sc_dmamem_ucd) + (sizeof(*ucd) * slot);
memset(ucd, 0, sizeof(*ucd));
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2f) */
ucd->cmd.hdr.tc = UPIU_TC_I2T_NOP_OUT;
ucd->cmd.hdr.flags = 0;
ucd->cmd.hdr.lun = 0;
ucd->cmd.hdr.taskid = ufshci_get_taskid(sc);
ucd->cmd.hdr.cmd_set_type = 0; /* SCSI command */
ucd->cmd.hdr.query = 0;
ucd->cmd.hdr.response = 0;
ucd->cmd.hdr.status = 0;
ucd->cmd.hdr.ehs_len = 0;
ucd->cmd.hdr.device_info = 0;
ucd->cmd.hdr.ds_len = 0;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2g) */
/* Already done with above memset */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 3) */
dva = UFSHCI_DMA_DVA(sc->sc_dmamem_ucd);
DPRINTF("%s: ucd dva=%llu\n", __func__, dva);
utrd->dw4 = (uint32_t)dva;
utrd->dw5 = (uint32_t)(dva >> 32);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 4) */
off = sizeof(struct upiu_command) / 4; /* DWORD offset */
utrd->dw6 = UFSHCI_UTRD_DW6_RUO(off);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 5) */
len = sizeof(struct upiu_response) / 4; /* DWORD length */
utrd->dw6 |= UFSHCI_UTRD_DW6_RUL(len);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 6) */
off = (sizeof(struct upiu_command) + sizeof(struct upiu_response)) / 4;
utrd->dw7 = UFSHCI_UTRD_DW7_PRDTO(off);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 7) */
utrd->dw7 |= UFSHCI_UTRD_DW7_PRDTL(0); /* No data xfer */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 9) */
if (UFSHCI_READ_4(sc, UFSHCI_REG_UTRLRSR) != 1) {
printf("%s: %s: UTRLRSR not set\n",
sc->sc_dev.dv_xname, __func__);
return -1;
}
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 10) */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 11) */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 12) */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 13) */
UFSHCI_WRITE_4(sc, UFSHCI_REG_UTRIACR,
UFSHCI_REG_UTRIACR_IAEN |
UFSHCI_REG_UTRIACR_IAPWEN |
UFSHCI_REG_UTRIACR_IACTH(UFSHCI_INTR_AGGR_COUNT) |
UFSHCI_REG_UTRIACR_IATOVAL(UFSHCI_INTR_AGGR_TIMEOUT));
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 14) */
ufshci_doorbell_set(sc, slot);
return 0;
}
int
ufshci_utr_cmd_lun(struct ufshci_softc *sc, struct ufshci_ccb *ccb,
struct scsi_xfer *xs)
{
int slot, off, len, i;
uint64_t dva;
struct ufshci_utrd *utrd;
struct ufshci_ucd *ucd;
bus_dmamap_t dmap = ccb->ccb_dmamap;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 1) */
slot = ufshci_doorbell_get_free(sc);
utrd = UFSHCI_DMA_KVA(sc->sc_dmamem_utrd) + (sizeof(*utrd) * slot);
memset(utrd, 0, sizeof(*utrd));
DPRINTF("%s: slot=%d\n", __func__, slot);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2a) */
utrd->dw0 = UFSHCI_UTRD_DW0_CT_UFS;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2b) */
utrd->dw0 |= UFSHCI_UTRD_DW0_DD_T2I;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2c) */
utrd->dw0 |= UFSHCI_UTRD_DW0_I_REG;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2d) */
utrd->dw2 = UFSHCI_UTRD_DW2_OCS_IOV;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2e) */
ucd = UFSHCI_DMA_KVA(sc->sc_dmamem_ucd) + (sizeof(*ucd) * slot);
memset(ucd, 0, sizeof(*ucd));
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2f) */
ucd->cmd.hdr.tc = UPIU_TC_I2T_COMMAND;
ucd->cmd.hdr.flags = (1 << 6); /* Bit-5 = Write, Bit-6 = Read */
ucd->cmd.hdr.lun = 0;
ucd->cmd.hdr.taskid = ufshci_get_taskid(sc);
ucd->cmd.hdr.cmd_set_type = 0; /* SCSI command */
ucd->cmd.hdr.query = 0;
ucd->cmd.hdr.response = 0;
ucd->cmd.hdr.status = 0;
ucd->cmd.hdr.ehs_len = 0;
ucd->cmd.hdr.device_info = 0;
ucd->cmd.hdr.ds_len = 0;
ucd->cmd.expected_xfer_len = htobe32(xs->datalen);
ucd->cmd.cdb[0] = REPORT_LUNS;
ucd->cmd.cdb[6] = 0;
ucd->cmd.cdb[7] = 0;
ucd->cmd.cdb[8] = 0;
ucd->cmd.cdb[9] = xs->datalen;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2g) */
/* Already done with above memset */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 3) */
dva = UFSHCI_DMA_DVA(sc->sc_dmamem_ucd);
DPRINTF("%s: ucd dva=%llu\n", __func__, dva);
utrd->dw4 = (uint32_t)dva;
utrd->dw5 = (uint32_t)(dva >> 32);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 4) */
off = sizeof(struct upiu_command) / 4; /* DWORD offset */
utrd->dw6 = UFSHCI_UTRD_DW6_RUO(off);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 5) */
len = sizeof(struct upiu_response) / 4; /* DWORD length */
utrd->dw6 |= UFSHCI_UTRD_DW6_RUL(len);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 6) */
off = (sizeof(struct upiu_command) + sizeof(struct upiu_response)) / 4;
utrd->dw7 = UFSHCI_UTRD_DW7_PRDTO(off);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 7) */
utrd->dw7 |= UFSHCI_UTRD_DW7_PRDTL(dmap->dm_nsegs);
/* Build PRDT data segment. */
for (i = 0; i < dmap->dm_nsegs; i++) {
dva = dmap->dm_segs[i].ds_addr;
ucd->prdt[i].dw0 = (uint32_t)dva;
ucd->prdt[i].dw1 = (uint32_t)(dva >> 32);
ucd->prdt[i].dw2 = 0;
ucd->prdt[i].dw3 = dmap->dm_segs[i].ds_len - 1;
}
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 9) */
if (UFSHCI_READ_4(sc, UFSHCI_REG_UTRLRSR) != 1) {
printf("%s: %s: UTRLRSR not set\n",
sc->sc_dev.dv_xname, __func__);
return -1;
}
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 10) */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 11) */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 12) */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 13) */
UFSHCI_WRITE_4(sc, UFSHCI_REG_UTRIACR,
UFSHCI_REG_UTRIACR_IAEN |
UFSHCI_REG_UTRIACR_IAPWEN |
UFSHCI_REG_UTRIACR_IACTH(UFSHCI_INTR_AGGR_COUNT) |
UFSHCI_REG_UTRIACR_IATOVAL(UFSHCI_INTR_AGGR_TIMEOUT));
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 14) */
ufshci_doorbell_set(sc, slot);
return 0;
}
int
ufshci_utr_cmd_inquiry(struct ufshci_softc *sc, struct ufshci_ccb *ccb,
struct scsi_xfer *xs)
{
int slot, off, len, i;
uint64_t dva;
struct ufshci_utrd *utrd;
struct ufshci_ucd *ucd;
bus_dmamap_t dmap = ccb->ccb_dmamap;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 1) */
slot = ufshci_doorbell_get_free(sc);
utrd = UFSHCI_DMA_KVA(sc->sc_dmamem_utrd) + (sizeof(*utrd) * slot);
memset(utrd, 0, sizeof(*utrd));
DPRINTF("%s: slot=%d\n", __func__, slot);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2a) */
utrd->dw0 = UFSHCI_UTRD_DW0_CT_UFS;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2b) */
utrd->dw0 |= UFSHCI_UTRD_DW0_DD_T2I;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2c) */
utrd->dw0 |= UFSHCI_UTRD_DW0_I_REG;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2d) */
utrd->dw2 = UFSHCI_UTRD_DW2_OCS_IOV;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2e) */
ucd = UFSHCI_DMA_KVA(sc->sc_dmamem_ucd) + (sizeof(*ucd) * slot);
memset(ucd, 0, sizeof(*ucd));
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2f) */
ucd->cmd.hdr.tc = UPIU_TC_I2T_COMMAND;
ucd->cmd.hdr.flags = (1 << 6); /* Bit-5 = Write, Bit-6 = Read */
ucd->cmd.hdr.lun = 0;
ucd->cmd.hdr.taskid = ufshci_get_taskid(sc);
ucd->cmd.hdr.cmd_set_type = 0; /* SCSI command */
ucd->cmd.hdr.query = 0;
ucd->cmd.hdr.response = 0;
ucd->cmd.hdr.status = 0;
ucd->cmd.hdr.ehs_len = 0;
ucd->cmd.hdr.device_info = 0;
ucd->cmd.hdr.ds_len = 0;
ucd->cmd.expected_xfer_len = htobe32(xs->datalen);
ucd->cmd.cdb[0] = INQUIRY; /* 0x12 */
ucd->cmd.cdb[3] = 0;
ucd->cmd.cdb[4] = xs->datalen;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2g) */
/* Already done with above memset */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 3) */
dva = UFSHCI_DMA_DVA(sc->sc_dmamem_ucd) + (sizeof(*ucd) * slot);
DPRINTF("%s: ucd dva=%llu\n", __func__, dva);
utrd->dw4 = (uint32_t)dva;
utrd->dw5 = (uint32_t)(dva >> 32);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 4) */
off = sizeof(struct upiu_command) / 4; /* DWORD offset */
utrd->dw6 = UFSHCI_UTRD_DW6_RUO(off);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 5) */
len = sizeof(struct upiu_response) / 4; /* DWORD length */
utrd->dw6 |= UFSHCI_UTRD_DW6_RUL(len);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 6) */
off = (sizeof(struct upiu_command) + sizeof(struct upiu_response)) / 4;
utrd->dw7 = UFSHCI_UTRD_DW7_PRDTO(off);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 7) */
utrd->dw7 |= UFSHCI_UTRD_DW7_PRDTL(dmap->dm_nsegs);
/* Build PRDT data segment. */
for (i = 0; i < dmap->dm_nsegs; i++) {
dva = dmap->dm_segs[i].ds_addr;
ucd->prdt[i].dw0 = (uint32_t)dva;
ucd->prdt[i].dw1 = (uint32_t)(dva >> 32);
ucd->prdt[i].dw2 = 0;
ucd->prdt[i].dw3 = dmap->dm_segs[i].ds_len - 1;
}
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 9) */
if (UFSHCI_READ_4(sc, UFSHCI_REG_UTRLRSR) != 1) {
printf("%s: %s: UTRLRSR not set\n",
sc->sc_dev.dv_xname, __func__);
return -1;
}
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 10) */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 11) */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 12) */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 13) */
if (!ISSET(xs->flags, SCSI_POLL)) {
UFSHCI_WRITE_4(sc, UFSHCI_REG_UTRIACR,
UFSHCI_REG_UTRIACR_IAEN |
UFSHCI_REG_UTRIACR_IAPWEN |
UFSHCI_REG_UTRIACR_IACTH(UFSHCI_INTR_AGGR_COUNT) |
UFSHCI_REG_UTRIACR_IATOVAL(UFSHCI_INTR_AGGR_TIMEOUT));
}
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 14) */
ufshci_doorbell_set(sc, slot);
return slot;
}
int
ufshci_utr_cmd_capacity16(struct ufshci_softc *sc, struct ufshci_ccb *ccb,
struct scsi_xfer *xs)
{
int slot, off, len, i;
uint64_t dva;
struct ufshci_utrd *utrd;
struct ufshci_ucd *ucd;
bus_dmamap_t dmap = ccb->ccb_dmamap;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 1) */
slot = ufshci_doorbell_get_free(sc);
utrd = UFSHCI_DMA_KVA(sc->sc_dmamem_utrd) + (sizeof(*utrd) * slot);
memset(utrd, 0, sizeof(*utrd));
DPRINTF("%s: slot=%d\n", __func__, slot);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2a) */
utrd->dw0 = UFSHCI_UTRD_DW0_CT_UFS;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2b) */
utrd->dw0 |= UFSHCI_UTRD_DW0_DD_T2I;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2c) */
utrd->dw0 |= UFSHCI_UTRD_DW0_I_REG;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2d) */
utrd->dw2 = UFSHCI_UTRD_DW2_OCS_IOV;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2e) */
ucd = UFSHCI_DMA_KVA(sc->sc_dmamem_ucd) + (sizeof(*ucd) * slot);
memset(ucd, 0, sizeof(*ucd));
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2f) */
ucd->cmd.hdr.tc = UPIU_TC_I2T_COMMAND;
ucd->cmd.hdr.flags = (1 << 6); /* Bit-5 = Write, Bit-6 = Read */
ucd->cmd.hdr.lun = 0;
ucd->cmd.hdr.taskid = ufshci_get_taskid(sc);
ucd->cmd.hdr.cmd_set_type = 0; /* SCSI command */
ucd->cmd.hdr.query = 0;
ucd->cmd.hdr.response = 0;
ucd->cmd.hdr.status = 0;
ucd->cmd.hdr.ehs_len = 0;
ucd->cmd.hdr.device_info = 0;
ucd->cmd.hdr.ds_len = 0;
ucd->cmd.expected_xfer_len = htobe32(xs->datalen);
ucd->cmd.cdb[0] = READ_CAPACITY_16; /* 0x9e */
ucd->cmd.cdb[1] = 0x10; /* Service Action */
/* Logical Block Address = 0 for UFS */
ucd->cmd.cdb[10] = 0;
ucd->cmd.cdb[11] = 0;
ucd->cmd.cdb[12] = 0;
ucd->cmd.cdb[13] = xs->datalen;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2g) */
/* Already done with above memset */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 3) */
dva = UFSHCI_DMA_DVA(sc->sc_dmamem_ucd) + (sizeof(*ucd) * slot);
DPRINTF("%s: ucd dva=%llu\n", __func__, dva);
utrd->dw4 = (uint32_t)dva;
utrd->dw5 = (uint32_t)(dva >> 32);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 4) */
off = sizeof(struct upiu_command) / 4; /* DWORD offset */
utrd->dw6 = UFSHCI_UTRD_DW6_RUO(off);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 5) */
len = sizeof(struct upiu_response) / 4; /* DWORD length */
utrd->dw6 |= UFSHCI_UTRD_DW6_RUL(len);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 6) */
off = (sizeof(struct upiu_command) + sizeof(struct upiu_response)) / 4;
utrd->dw7 = UFSHCI_UTRD_DW7_PRDTO(off);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 7) */
utrd->dw7 |= UFSHCI_UTRD_DW7_PRDTL(dmap->dm_nsegs);
/* Build PRDT data segment. */
for (i = 0; i < dmap->dm_nsegs; i++) {
dva = dmap->dm_segs[i].ds_addr;
ucd->prdt[i].dw0 = (uint32_t)dva;
ucd->prdt[i].dw1 = (uint32_t)(dva >> 32);
ucd->prdt[i].dw2 = 0;
ucd->prdt[i].dw3 = dmap->dm_segs[i].ds_len - 1;
}
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 9) */
if (UFSHCI_READ_4(sc, UFSHCI_REG_UTRLRSR) != 1) {
printf("%s: %s: UTRLRSR not set\n",
sc->sc_dev.dv_xname, __func__);
return -1;
}
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 10) */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 11) */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 12) */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 13) */
if (!ISSET(xs->flags, SCSI_POLL)) {
UFSHCI_WRITE_4(sc, UFSHCI_REG_UTRIACR,
UFSHCI_REG_UTRIACR_IAEN |
UFSHCI_REG_UTRIACR_IAPWEN |
UFSHCI_REG_UTRIACR_IACTH(UFSHCI_INTR_AGGR_COUNT) |
UFSHCI_REG_UTRIACR_IATOVAL(UFSHCI_INTR_AGGR_TIMEOUT));
}
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 14) */
ufshci_doorbell_set(sc, slot);
return slot;
}
int
ufshci_utr_cmd_capacity(struct ufshci_softc *sc, struct ufshci_ccb *ccb,
struct scsi_xfer *xs)
{
int slot, off, len, i;
uint64_t dva;
struct ufshci_utrd *utrd;
struct ufshci_ucd *ucd;
bus_dmamap_t dmap = ccb->ccb_dmamap;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 1) */
slot = ufshci_doorbell_get_free(sc);
utrd = UFSHCI_DMA_KVA(sc->sc_dmamem_utrd) + (sizeof(*utrd) * slot);
memset(utrd, 0, sizeof(*utrd));
DPRINTF("%s: slot=%d\n", __func__, slot);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2a) */
utrd->dw0 = UFSHCI_UTRD_DW0_CT_UFS;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2b) */
utrd->dw0 |= UFSHCI_UTRD_DW0_DD_T2I;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2c) */
utrd->dw0 |= UFSHCI_UTRD_DW0_I_REG;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2d) */
utrd->dw2 = UFSHCI_UTRD_DW2_OCS_IOV;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2e) */
ucd = UFSHCI_DMA_KVA(sc->sc_dmamem_ucd) + (sizeof(*ucd) * slot);
memset(ucd, 0, sizeof(*ucd));
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2f) */
ucd->cmd.hdr.tc = UPIU_TC_I2T_COMMAND;
ucd->cmd.hdr.flags = (1 << 6); /* Bit-5 = Write, Bit-6 = Read */
ucd->cmd.hdr.lun = 0;
ucd->cmd.hdr.taskid = ufshci_get_taskid(sc);
ucd->cmd.hdr.cmd_set_type = 0; /* SCSI command */
ucd->cmd.hdr.query = 0;
ucd->cmd.hdr.response = 0;
ucd->cmd.hdr.status = 0;
ucd->cmd.hdr.ehs_len = 0;
ucd->cmd.hdr.device_info = 0;
ucd->cmd.hdr.ds_len = 0;
ucd->cmd.expected_xfer_len = htobe32(xs->datalen);
ucd->cmd.cdb[0] = READ_CAPACITY; /* 0x25 */
/* Logical Block Address = 0 for UFS */
ucd->cmd.cdb[2] = 0;
ucd->cmd.cdb[3] = 0;
ucd->cmd.cdb[4] = 0;
ucd->cmd.cdb[5] = 0;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2g) */
/* Already done with above memset */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 3) */
dva = UFSHCI_DMA_DVA(sc->sc_dmamem_ucd) + (sizeof(*ucd) * slot);
DPRINTF("%s: ucd dva=%llu\n", __func__, dva);
utrd->dw4 = (uint32_t)dva;
utrd->dw5 = (uint32_t)(dva >> 32);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 4) */
off = sizeof(struct upiu_command) / 4; /* DWORD offset */
utrd->dw6 = UFSHCI_UTRD_DW6_RUO(off);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 5) */
len = sizeof(struct upiu_response) / 4; /* DWORD length */
utrd->dw6 |= UFSHCI_UTRD_DW6_RUL(len);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 6) */
off = (sizeof(struct upiu_command) + sizeof(struct upiu_response)) / 4;
utrd->dw7 = UFSHCI_UTRD_DW7_PRDTO(off);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 7) */
utrd->dw7 |= UFSHCI_UTRD_DW7_PRDTL(dmap->dm_nsegs);
/* Build PRDT data segment. */
for (i = 0; i < dmap->dm_nsegs; i++) {
dva = dmap->dm_segs[i].ds_addr;
ucd->prdt[i].dw0 = (uint32_t)dva;
ucd->prdt[i].dw1 = (uint32_t)(dva >> 32);
ucd->prdt[i].dw2 = 0;
ucd->prdt[i].dw3 = dmap->dm_segs[i].ds_len - 1;
}
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 9) */
if (UFSHCI_READ_4(sc, UFSHCI_REG_UTRLRSR) != 1) {
printf("%s: %s: UTRLRSR not set\n",
sc->sc_dev.dv_xname, __func__);
return -1;
}
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 10) */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 11) */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 12) */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 13) */
if (!ISSET(xs->flags, SCSI_POLL)) {
UFSHCI_WRITE_4(sc, UFSHCI_REG_UTRIACR,
UFSHCI_REG_UTRIACR_IAEN |
UFSHCI_REG_UTRIACR_IAPWEN |
UFSHCI_REG_UTRIACR_IACTH(UFSHCI_INTR_AGGR_COUNT) |
UFSHCI_REG_UTRIACR_IATOVAL(UFSHCI_INTR_AGGR_TIMEOUT));
}
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 14) */
ufshci_doorbell_set(sc, slot);
return slot;
}
int
ufshci_utr_cmd_io(struct ufshci_softc *sc, struct ufshci_ccb *ccb,
struct scsi_xfer *xs, int dir)
{
int slot, off, len, i;
uint64_t dva;
struct ufshci_utrd *utrd;
struct ufshci_ucd *ucd;
bus_dmamap_t dmap = ccb->ccb_dmamap;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 1) */
slot = ufshci_doorbell_get_free(sc);
utrd = UFSHCI_DMA_KVA(sc->sc_dmamem_utrd) + (sizeof(*utrd) * slot);
memset(utrd, 0, sizeof(*utrd));
DPRINTF("%s: slot=%d\n", __func__, slot);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2a) */
utrd->dw0 = UFSHCI_UTRD_DW0_CT_UFS;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2b) */
if (dir == SCSI_DATA_IN)
utrd->dw0 |= UFSHCI_UTRD_DW0_DD_T2I;
else
utrd->dw0 |= UFSHCI_UTRD_DW0_DD_I2T;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2c) */
utrd->dw0 |= UFSHCI_UTRD_DW0_I_REG;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2d) */
utrd->dw2 = UFSHCI_UTRD_DW2_OCS_IOV;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2e) */
ucd = UFSHCI_DMA_KVA(sc->sc_dmamem_ucd) + (sizeof(*ucd) * slot);
memset(ucd, 0, sizeof(*ucd));
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2f) */
ucd->cmd.hdr.tc = UPIU_TC_I2T_COMMAND;
if (dir == SCSI_DATA_IN)
ucd->cmd.hdr.flags = (1 << 6); /* Bit-6 = Read */
else
ucd->cmd.hdr.flags = (1 << 5); /* Bit-5 = Write */
ucd->cmd.hdr.lun = 0;
ucd->cmd.hdr.taskid = ufshci_get_taskid(sc);
ucd->cmd.hdr.cmd_set_type = 0; /* SCSI command */
ucd->cmd.hdr.query = 0;
ucd->cmd.hdr.response = 0;
ucd->cmd.hdr.status = 0;
ucd->cmd.hdr.ehs_len = 0;
ucd->cmd.hdr.device_info = 0;
ucd->cmd.hdr.ds_len = 0;
ucd->cmd.expected_xfer_len = htobe32(xs->datalen);
memcpy(ucd->cmd.cdb, &xs->cmd, sizeof(ucd->cmd.cdb));
if (dir == SCSI_DATA_OUT)
ucd->cmd.cdb[1] = (1 << 3); /* FUA: Force Unit Access */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2g) */
/* Already done with above memset */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 3) */
dva = UFSHCI_DMA_DVA(sc->sc_dmamem_ucd) + (sizeof(*ucd) * slot);
DPRINTF("%s: ucd dva=%llu\n", __func__, dva);
utrd->dw4 = (uint32_t)dva;
utrd->dw5 = (uint32_t)(dva >> 32);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 4) */
off = sizeof(struct upiu_command) / 4; /* DWORD offset */
utrd->dw6 = UFSHCI_UTRD_DW6_RUO(off);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 5) */
len = sizeof(struct upiu_response) / 4; /* DWORD length */
utrd->dw6 |= UFSHCI_UTRD_DW6_RUL(len);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 6) */
off = (sizeof(struct upiu_command) + sizeof(struct upiu_response)) / 4;
utrd->dw7 = UFSHCI_UTRD_DW7_PRDTO(off);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 7) */
utrd->dw7 |= UFSHCI_UTRD_DW7_PRDTL(dmap->dm_nsegs);
/* Build PRDT data segment. */
for (i = 0; i < dmap->dm_nsegs; i++) {
dva = dmap->dm_segs[i].ds_addr;
ucd->prdt[i].dw0 = (uint32_t)dva;
ucd->prdt[i].dw1 = (uint32_t)(dva >> 32);
ucd->prdt[i].dw2 = 0;
ucd->prdt[i].dw3 = dmap->dm_segs[i].ds_len - 1;
}
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 9) */
if (UFSHCI_READ_4(sc, UFSHCI_REG_UTRLRSR) != 1) {
printf("%s: %s: UTRLRSR not set\n",
sc->sc_dev.dv_xname, __func__);
return -1;
}
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 10) */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 11) */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 12) */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 13) */
if (!ISSET(xs->flags, SCSI_POLL)) {
UFSHCI_WRITE_4(sc, UFSHCI_REG_UTRIACR,
UFSHCI_REG_UTRIACR_IAEN |
UFSHCI_REG_UTRIACR_IAPWEN |
UFSHCI_REG_UTRIACR_IACTH(UFSHCI_INTR_AGGR_COUNT) |
UFSHCI_REG_UTRIACR_IATOVAL(UFSHCI_INTR_AGGR_TIMEOUT));
}
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 14) */
ufshci_doorbell_set(sc, slot);
return slot;
}
int
ufshci_utr_cmd_sync(struct ufshci_softc *sc, struct ufshci_ccb *ccb,
struct scsi_xfer *xs, uint32_t lba, uint16_t blocks)
{
int slot, off, len;
uint64_t dva;
struct ufshci_utrd *utrd;
struct ufshci_ucd *ucd;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 1) */
slot = ufshci_doorbell_get_free(sc);
utrd = UFSHCI_DMA_KVA(sc->sc_dmamem_utrd) + (sizeof(*utrd) * slot);
memset(utrd, 0, sizeof(*utrd));
DPRINTF("%s: slot=%d\n", __func__, slot);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2a) */
utrd->dw0 = UFSHCI_UTRD_DW0_CT_UFS;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2b) */
utrd->dw0 |= UFSHCI_UTRD_DW0_DD_I2T;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2c) */
utrd->dw0 |= UFSHCI_UTRD_DW0_I_REG;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2d) */
utrd->dw2 = UFSHCI_UTRD_DW2_OCS_IOV;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2e) */
ucd = UFSHCI_DMA_KVA(sc->sc_dmamem_ucd) + (sizeof(*ucd) * slot);
memset(ucd, 0, sizeof(*ucd));
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2f) */
ucd->cmd.hdr.tc = UPIU_TC_I2T_COMMAND;
ucd->cmd.hdr.flags = 0; /* No data transfer */
ucd->cmd.hdr.lun = 0;
ucd->cmd.hdr.taskid = ufshci_get_taskid(sc);
ucd->cmd.hdr.cmd_set_type = 0; /* SCSI command */
ucd->cmd.hdr.query = 0;
ucd->cmd.hdr.response = 0;
ucd->cmd.hdr.status = 0;
ucd->cmd.hdr.ehs_len = 0;
ucd->cmd.hdr.device_info = 0;
ucd->cmd.hdr.ds_len = 0;
ucd->cmd.expected_xfer_len = htobe32(0); /* No data transfer */
ucd->cmd.cdb[0] = SYNCHRONIZE_CACHE; /* 0x35 */
ucd->cmd.cdb[2] = (lba >> 24) & 0xff;
ucd->cmd.cdb[3] = (lba >> 16) & 0xff;
ucd->cmd.cdb[4] = (lba >> 8) & 0xff;
ucd->cmd.cdb[5] = (lba >> 0) & 0xff;
ucd->cmd.cdb[7] = (blocks >> 8) & 0xff;
ucd->cmd.cdb[8] = (blocks >> 0) & 0xff;
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 2g) */
/* Already done with above memset */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 3) */
dva = UFSHCI_DMA_DVA(sc->sc_dmamem_ucd) + (sizeof(*ucd) * slot);
DPRINTF("%s: ucd dva=%llu\n", __func__, dva);
utrd->dw4 = (uint32_t)dva;
utrd->dw5 = (uint32_t)(dva >> 32);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 4) */
off = sizeof(struct upiu_command) / 4; /* DWORD offset */
utrd->dw6 = UFSHCI_UTRD_DW6_RUO(off);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 5) */
len = sizeof(struct upiu_response) / 4; /* DWORD length */
utrd->dw6 |= UFSHCI_UTRD_DW6_RUL(len);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 6) */
off = (sizeof(struct upiu_command) + sizeof(struct upiu_response)) / 4;
utrd->dw7 = UFSHCI_UTRD_DW7_PRDTO(off);
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 7) */
utrd->dw7 |= UFSHCI_UTRD_DW7_PRDTL(0); /* No data xfer */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 9) */
if (UFSHCI_READ_4(sc, UFSHCI_REG_UTRLRSR) != 1) {
printf("%s: %s: UTRLRSR not set\n",
sc->sc_dev.dv_xname, __func__);
return -1;
}
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 10) */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 11) */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 12) */
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 13) */
if (!ISSET(xs->flags, SCSI_POLL)) {
UFSHCI_WRITE_4(sc, UFSHCI_REG_UTRIACR,
UFSHCI_REG_UTRIACR_IAEN |
UFSHCI_REG_UTRIACR_IAPWEN |
UFSHCI_REG_UTRIACR_IACTH(UFSHCI_INTR_AGGR_COUNT) |
UFSHCI_REG_UTRIACR_IATOVAL(UFSHCI_INTR_AGGR_TIMEOUT));
}
/* 7.2.1 Basic Steps when Building a UTP Transfer Request: 14) */
ufshci_doorbell_set(sc, slot);
return slot;
}
int
ufshci_xfer_complete(struct ufshci_softc *sc)
{
struct ufshci_ccb *ccb;
uint32_t reg;
int i;
reg = ufshci_doorbell_read(sc);
for (i = 0; i < sc->sc_nutrs; i++) {
ccb = &sc->sc_ccbs[i];
if (ccb->ccb_slot == -1)
/* CCB isn't used. */
continue;
if (reg & (1 << ccb->ccb_slot))
/* Transfer is still in progress. */
continue;
/* Transfer has completed. */
if (ccb->ccb_done == NULL)
panic("ccb_done not defined");
ccb->ccb_done(sc, ccb);
}
return 0;
}
/* SCSI */
int
ufshci_ccb_alloc(struct ufshci_softc *sc, int nccbs)
{
struct ufshci_ccb *ccb;
int i;
DPRINTF("%s: nccbs=%d, dma_size=%d, dma_nsegs=%d, "
"dma_segmaxsize=%d\n",
__func__, nccbs, UFSHCI_UCD_PRDT_MAX_XFER, UFSHCI_UCD_PRDT_MAX_SEGS,
UFSHCI_UCD_PRDT_MAX_XFER);
sc->sc_ccbs = mallocarray(nccbs, sizeof(*ccb), M_DEVBUF,
M_WAITOK | M_CANFAIL);
if (sc->sc_ccbs == NULL)
return 1;
for (i = 0; i < nccbs; i++) {
ccb = &sc->sc_ccbs[i];
if (bus_dmamap_create(sc->sc_dmat, UFSHCI_UCD_PRDT_MAX_XFER,
UFSHCI_UCD_PRDT_MAX_SEGS, UFSHCI_UCD_PRDT_MAX_XFER, 0,
BUS_DMA_WAITOK | BUS_DMA_ALLOCNOW | BUS_DMA_64BIT,
&ccb->ccb_dmamap) != 0)
goto free_maps;
ccb->ccb_cookie = NULL;
ccb->ccb_slot = -1;
SIMPLEQ_INSERT_TAIL(&sc->sc_ccb_list, ccb, ccb_entry);
}
return 0;
free_maps:
ufshci_ccb_free(sc, nccbs);
return 1;
}
void *
ufshci_ccb_get(void *cookie)
{
struct ufshci_softc *sc = cookie;
struct ufshci_ccb *ccb;
DPRINTF("%s\n", __func__);
mtx_enter(&sc->sc_ccb_mtx);
ccb = SIMPLEQ_FIRST(&sc->sc_ccb_list);
if (ccb != NULL)
SIMPLEQ_REMOVE_HEAD(&sc->sc_ccb_list, ccb_entry);
mtx_leave(&sc->sc_ccb_mtx);
return ccb;
}
void
ufshci_ccb_put(void *cookie, void *io)
{
struct ufshci_softc *sc = cookie;
struct ufshci_ccb *ccb = io;
DPRINTF("%s\n", __func__);
mtx_enter(&sc->sc_ccb_mtx);
SIMPLEQ_INSERT_HEAD(&sc->sc_ccb_list, ccb, ccb_entry);
mtx_leave(&sc->sc_ccb_mtx);
}
void
ufshci_ccb_free(struct ufshci_softc *sc, int nccbs)
{
struct ufshci_ccb *ccb;
DPRINTF("%s\n", __func__);
while ((ccb = SIMPLEQ_FIRST(&sc->sc_ccb_list)) != NULL) {
SIMPLEQ_REMOVE_HEAD(&sc->sc_ccb_list, ccb_entry);
bus_dmamap_destroy(sc->sc_dmat, ccb->ccb_dmamap);
}
ufshci_dmamem_free(sc, sc->sc_dmamem_utrd);
free(sc->sc_ccbs, M_DEVBUF, nccbs * sizeof(*ccb));
}
void
ufshci_scsi_cmd(struct scsi_xfer *xs)
{
struct scsi_link *link = xs->sc_link;
struct ufshci_softc *sc = link->bus->sb_adapter_softc;
DPRINTF("%s: cmd=0x%x\n", __func__, xs->cmd.opcode);
if (!cold && !sc->sc_intraggr_enabled) {
DPRINTF("%s: Enable interrupt aggregation\n", __func__);
UFSHCI_WRITE_4(sc, UFSHCI_REG_UTRIACR,
UFSHCI_REG_UTRIACR_IAEN |
UFSHCI_REG_UTRIACR_IAPWEN |
UFSHCI_REG_UTRIACR_CTR |
UFSHCI_REG_UTRIACR_IACTH(UFSHCI_INTR_AGGR_COUNT) |
UFSHCI_REG_UTRIACR_IATOVAL(UFSHCI_INTR_AGGR_TIMEOUT));
sc->sc_intraggr_enabled = 1;
}
switch (xs->cmd.opcode) {
case READ_COMMAND:
case READ_10:
case READ_12:
case READ_16:
ufshci_scsi_io(xs, SCSI_DATA_IN);
return;
case WRITE_COMMAND:
case WRITE_10:
case WRITE_12:
case WRITE_16:
ufshci_scsi_io(xs, SCSI_DATA_OUT);
return;
case SYNCHRONIZE_CACHE:
ufshci_scsi_sync(xs);
return;
case INQUIRY:
ufshci_scsi_inquiry(xs);
return;
case READ_CAPACITY_16:
ufshci_scsi_capacity16(xs);
return;
case READ_CAPACITY:
ufshci_scsi_capacity(xs);
return;
case TEST_UNIT_READY:
case PREVENT_ALLOW:
case START_STOP:
xs->error = XS_NOERROR;
scsi_done(xs);
return;
default:
DPRINTF("%s: unhandled scsi command 0x%02x\n",
__func__, xs->cmd.opcode);
break;
}
xs->error = XS_DRIVER_STUFFUP;
scsi_done(xs);
}
void
ufshci_minphys(struct buf *bp, struct scsi_link *link)
{
DPRINTF("%s\n", __func__);
}
int
ufshci_scsi_probe(struct scsi_link *link)
{
DPRINTF("%s\n", __func__);
return 0;
}
void
ufshci_scsi_free(struct scsi_link *link)
{
DPRINTF("%s\n", __func__);
}
void
ufshci_scsi_inquiry(struct scsi_xfer *xs)
{
struct scsi_link *link = xs->sc_link;
struct ufshci_softc *sc = link->bus->sb_adapter_softc;
struct ufshci_ccb *ccb = xs->io;
bus_dmamap_t dmap = ccb->ccb_dmamap;
int error;
DPRINTF("%s: INQUIRY (%s)\n",
__func__, ISSET(xs->flags, SCSI_POLL) ? "poll" : "no poll");
if (xs->datalen > UPIU_SCSI_RSP_INQUIRY_SIZE) {
DPRINTF("%s: request len too large\n", __func__);
goto error1;
}
error = bus_dmamap_load(sc->sc_dmat, dmap, xs->data, xs->datalen, NULL,
ISSET(xs->flags, SCSI_NOSLEEP) ? BUS_DMA_NOWAIT : BUS_DMA_WAITOK);
if (error != 0) {
printf("%s: bus_dmamap_load error=%d\n", __func__, error);
goto error1;
}
bus_dmamap_sync(sc->sc_dmat, dmap, 0, dmap->dm_mapsize,
BUS_DMASYNC_PREREAD);
ccb->ccb_cookie = xs;
ccb->ccb_done = ufshci_scsi_io_done;
/* Response length should be UPIU_SCSI_RSP_INQUIRY_SIZE. */
ccb->ccb_slot = ufshci_utr_cmd_inquiry(sc, ccb, xs);
if (ccb->ccb_slot == -1)
goto error2;
if (ISSET(xs->flags, SCSI_POLL)) {
if (ufshci_doorbell_poll(sc, ccb->ccb_slot) == 0) {
ccb->ccb_done(sc, ccb);
return;
}
goto error2;
}
return;
error2:
bus_dmamap_unload(sc->sc_dmat, dmap);
ccb->ccb_cookie = NULL;
ccb->ccb_slot = -1;
ccb->ccb_done = NULL;
error1:
xs->error = XS_DRIVER_STUFFUP;
scsi_done(xs);
}
void
ufshci_scsi_capacity16(struct scsi_xfer *xs)
{
struct scsi_link *link = xs->sc_link;
struct ufshci_softc *sc = link->bus->sb_adapter_softc;
struct ufshci_ccb *ccb = xs->io;
bus_dmamap_t dmap = ccb->ccb_dmamap;
int error;
DPRINTF("%s: CAPACITY16 (%s)\n",
__func__, ISSET(xs->flags, SCSI_POLL) ? "poll" : "no poll");
if (xs->datalen > UPIU_SCSI_RSP_CAPACITY16_SIZE) {
DPRINTF("%s: request len too large\n", __func__);
goto error1;
}
error = bus_dmamap_load(sc->sc_dmat, dmap, xs->data, xs->datalen, NULL,
ISSET(xs->flags, SCSI_NOSLEEP) ? BUS_DMA_NOWAIT : BUS_DMA_WAITOK);
if (error != 0) {
printf("%s: bus_dmamap_load error=%d\n", __func__, error);
goto error1;
}
bus_dmamap_sync(sc->sc_dmat, dmap, 0, dmap->dm_mapsize,
BUS_DMASYNC_PREREAD);
ccb->ccb_cookie = xs;
ccb->ccb_done = ufshci_scsi_io_done;
/* Response length should be UPIU_SCSI_RSP_CAPACITY16_SIZE. */
ccb->ccb_slot = ufshci_utr_cmd_capacity16(sc, ccb, xs);
if (ccb->ccb_slot == -1)
goto error2;
if (ISSET(xs->flags, SCSI_POLL)) {
if (ufshci_doorbell_poll(sc, ccb->ccb_slot) == 0) {
ccb->ccb_done(sc, ccb);
return;
}
goto error2;
}
return;
error2:
bus_dmamap_unload(sc->sc_dmat, dmap);
ccb->ccb_cookie = NULL;
ccb->ccb_slot = -1;
ccb->ccb_done = NULL;
error1:
xs->error = XS_DRIVER_STUFFUP;
scsi_done(xs);
}
void
ufshci_scsi_capacity(struct scsi_xfer *xs)
{
struct scsi_link *link = xs->sc_link;
struct ufshci_softc *sc = link->bus->sb_adapter_softc;
struct ufshci_ccb *ccb = xs->io;
bus_dmamap_t dmap = ccb->ccb_dmamap;
int error;
DPRINTF("%s: CAPACITY (%s)\n",
__func__, ISSET(xs->flags, SCSI_POLL) ? "poll" : "no poll");
if (xs->datalen > UPIU_SCSI_RSP_CAPACITY_SIZE) {
DPRINTF("%s: request len too large\n", __func__);
goto error1;
}
error = bus_dmamap_load(sc->sc_dmat, dmap, xs->data, xs->datalen, NULL,
ISSET(xs->flags, SCSI_NOSLEEP) ? BUS_DMA_NOWAIT : BUS_DMA_WAITOK);
if (error != 0) {
printf("%s: bus_dmamap_load error=%d\n", __func__, error);
goto error1;
}
bus_dmamap_sync(sc->sc_dmat, dmap, 0, dmap->dm_mapsize,
BUS_DMASYNC_PREREAD);
ccb->ccb_cookie = xs;
ccb->ccb_done = ufshci_scsi_io_done;
/* Response length should be UPIU_SCSI_RSP_CAPACITY_SIZE */
ccb->ccb_slot = ufshci_utr_cmd_capacity(sc, ccb, xs);
if (ccb->ccb_slot == -1)
goto error2;
if (ISSET(xs->flags, SCSI_POLL)) {
if (ufshci_doorbell_poll(sc, ccb->ccb_slot) == 0) {
ccb->ccb_done(sc, ccb);
return;
}
goto error2;
}
return;
error2:
bus_dmamap_unload(sc->sc_dmat, dmap);
ccb->ccb_cookie = NULL;
ccb->ccb_slot = -1;
ccb->ccb_done = NULL;
error1:
xs->error = XS_DRIVER_STUFFUP;
scsi_done(xs);
}
void
ufshci_scsi_sync(struct scsi_xfer *xs)
{
struct scsi_link *link = xs->sc_link;
struct ufshci_softc *sc = link->bus->sb_adapter_softc;
struct ufshci_ccb *ccb = xs->io;
uint64_t lba;
uint32_t blocks;
/* lba = 0, blocks = 0: Synchronize all logical blocks. */
lba = 0; blocks = 0;
DPRINTF("%s: SYNC, lba=%llu, blocks=%u (%s)\n",
__func__, lba, blocks,
ISSET(xs->flags, SCSI_POLL) ? "poll" : "no poll");
ccb->ccb_cookie = xs;
ccb->ccb_done = ufshci_scsi_done;
ccb->ccb_slot = ufshci_utr_cmd_sync(sc, ccb, xs, (uint32_t)lba,
(uint16_t)blocks);
if (ccb->ccb_slot == -1)
goto error;
if (ISSET(xs->flags, SCSI_POLL)) {
if (ufshci_doorbell_poll(sc, ccb->ccb_slot) == 0) {
ccb->ccb_done(sc, ccb);
return;
}
goto error;
}
return;
error:
ccb->ccb_cookie = NULL;
ccb->ccb_slot = -1;
ccb->ccb_done = NULL;
xs->error = XS_DRIVER_STUFFUP;
scsi_done(xs);
}
void
ufshci_scsi_io(struct scsi_xfer *xs, int dir)
{
struct scsi_link *link = xs->sc_link;
struct ufshci_softc *sc = link->bus->sb_adapter_softc;
struct ufshci_ccb *ccb = xs->io;
bus_dmamap_t dmap = ccb->ccb_dmamap;
int error;
if ((xs->flags & (SCSI_DATA_IN | SCSI_DATA_OUT)) != dir)
goto error1;
DPRINTF("%s: %s, lba=%llu, blocks=%u, datalen=%d (%s)\n",
__func__,
ISSET(xs->flags, SCSI_DATA_IN) ? "READ" : "WRITE",
lba, blocks, xs->datalen,
ISSET(xs->flags, SCSI_POLL) ? "poll" : "no poll");
error = bus_dmamap_load(sc->sc_dmat, dmap, xs->data, xs->datalen, NULL,
ISSET(xs->flags, SCSI_NOSLEEP) ? BUS_DMA_NOWAIT : BUS_DMA_WAITOK);
if (error != 0) {
printf("%s: bus_dmamap_load error=%d\n", __func__, error);
goto error1;
}
bus_dmamap_sync(sc->sc_dmat, dmap, 0, dmap->dm_mapsize,
ISSET(xs->flags, SCSI_DATA_IN) ? BUS_DMASYNC_PREREAD :
BUS_DMASYNC_PREWRITE);
ccb->ccb_cookie = xs;
ccb->ccb_done = ufshci_scsi_io_done;
if (dir == SCSI_DATA_IN)
ccb->ccb_slot = ufshci_utr_cmd_io(sc, ccb, xs, SCSI_DATA_IN);
else
ccb->ccb_slot = ufshci_utr_cmd_io(sc, ccb, xs, SCSI_DATA_OUT);
if (ccb->ccb_slot == -1)
goto error2;
if (ISSET(xs->flags, SCSI_POLL)) {
if (ufshci_doorbell_poll(sc, ccb->ccb_slot) == 0) {
ccb->ccb_done(sc, ccb);
return;
}
goto error2;
}
return;
error2:
bus_dmamap_unload(sc->sc_dmat, dmap);
ccb->ccb_cookie = NULL;
ccb->ccb_slot = -1;
ccb->ccb_done = NULL;
error1:
xs->error = XS_DRIVER_STUFFUP;
scsi_done(xs);
}
void
ufshci_scsi_io_done(struct ufshci_softc *sc, struct ufshci_ccb *ccb)
{
struct scsi_xfer *xs = ccb->ccb_cookie;
bus_dmamap_t dmap = ccb->ccb_dmamap;
bus_dmamap_sync(sc->sc_dmat, dmap, 0, dmap->dm_mapsize,
ISSET(xs->flags, SCSI_DATA_IN) ? BUS_DMASYNC_POSTREAD :
BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->sc_dmat, dmap);
ccb->ccb_cookie = NULL;
ccb->ccb_slot = -1;
ccb->ccb_done = NULL;
xs->error = XS_NOERROR;
xs->status = SCSI_OK;
xs->resid = 0;
scsi_done(xs);
}
void
ufshci_scsi_done(struct ufshci_softc *sc, struct ufshci_ccb *ccb)
{
struct scsi_xfer *xs = ccb->ccb_cookie;
ccb->ccb_cookie = NULL;
ccb->ccb_slot = -1;
ccb->ccb_done = NULL;
xs->error = XS_NOERROR;
xs->status = SCSI_OK;
xs->resid = 0;
scsi_done(xs);
}
Reference in New Issue View Git Blame Copy Permalink