HardenedBSD/sbin/newfs/newfs.h

124 lines
5.4 KiB
C
Raw Normal View History

2002-03-19 21:01:38 +01:00
/*
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 08:18:05 +02:00
* Copyright (c) 2002 Networks Associates Technology, Inc.
* All rights reserved.
*
* This software was developed for the FreeBSD Project by Marshall
* Kirk McKusick and Network Associates Laboratories, the Security
* Research Division of Network Associates, Inc. under DARPA/SPAWAR
* contract N66001-01-C-8035 ("CBOSS"), as part of the DARPA CHATS
* research program.
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 08:18:05 +02:00
*
2002-03-19 21:01:38 +01:00
* Copyright (c) 1980, 1989, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include <libufs.h>
2002-03-19 21:01:38 +01:00
/*
* The following two constants set the default block and fragment sizes.
* Both constants must be a power of 2 and meet the following constraints:
* MINBSIZE <= DESBLKSIZE <= MAXBSIZE
* sectorsize <= DESFRAGSIZE <= DESBLKSIZE
* DESBLKSIZE / DESFRAGSIZE <= 8
*/
#define DFL_FRAGSIZE 4096
#define DFL_BLKSIZE 32768
/*
* Cylinder groups may have up to MAXBLKSPERCG blocks. The actual
* number used depends upon how much information can be stored
* in a cylinder group map which must fit in a single file system
* block. The default is to use as many as possible blocks per group.
*/
#define MAXBLKSPERCG 0x7fffffff /* desired fs_fpg ("infinity") */
/*
* MAXBLKPG determines the maximum number of data blocks which are
* placed in a single cylinder group. The default is one indirect
* block worth of data blocks.
*/
#define MAXBLKPG(bsize) ((bsize) / sizeof(ufs2_daddr_t))
/*
* Each file system has a number of inodes statically allocated.
* We allocate one inode slot per NFPI fragments, expecting this
* to be far more than we will ever need.
*/
#define NFPI 2
2002-03-19 21:01:38 +01:00
/*
* variables set up by front end.
*/
extern int Eflag; /* Erase previous disk contents */
extern int Lflag; /* add a volume label */
extern int Nflag; /* run mkfs without writing file system */
extern int Oflag; /* build UFS1 format file system */
extern int Rflag; /* regression test */
extern int Uflag; /* enable soft updates for file system */
extern int jflag; /* enable soft updates journaling for filesys */
extern int Xflag; /* exit in middle of newfs for testing */
extern int Jflag; /* enable gjournal for file system */
extern int lflag; /* enable multilabel MAC for file system */
extern int nflag; /* do not create .snap directory */
extern int tflag; /* enable TRIM */
extern intmax_t fssize; /* file system size */
extern int sectorsize; /* bytes/sector */
2002-03-19 21:01:38 +01:00
extern int realsectorsize; /* bytes/sector in hardware*/
extern int fsize; /* fragment size */
extern int bsize; /* block size */
extern int maxbsize; /* maximum clustering */
extern int maxblkspercg; /* maximum blocks per cylinder group */
2002-03-19 21:01:38 +01:00
extern int minfree; /* free space threshold */
extern int opt; /* optimization preference (space or time) */
extern int density; /* number of bytes per inode */
extern int maxcontig; /* max contiguous blocks to allocate */
extern int maxbpg; /* maximum blocks per file in a cyl group */
extern int avgfilesize; /* expected average file size */
extern int avgfilesperdir; /* expected number of files per directory */
extern u_char *volumelabel; /* volume label for filesystem */
extern struct uufsd disk; /* libufs disk structure */
/*
* To override a limitation in libufs, export the offset (in sectors) of the
* partition on the underlying media (file or disk). The value is used as
* an offset for all accesses to the media through bread(), which is only
* invoked directly in this program.
* For bwrite() we need a different approach, namely override the library
* version with one defined here. This is because bwrite() is called also
* by the library function sbwrite() which we cannot intercept nor want to
* rewrite. As a consequence, the internal version of bwrite() adds the
* partition offset itself when calling the underlying function, pwrite().
*
* XXX This info really ought to go into the struct uufsd, at which point
* we can remove the above hack.
*/
extern ufs2_daddr_t part_ofs; /* partition offset in blocks */
void mkfs (struct partition *, char *);