HardenedBSD/release/scripts/extract_xf86311.sh

#!/stand/sh
#
# xf86311 - extract XFree86 3.1.1 onto a FreeBSD 2.1 system.
#
# Written:  February 2nd, 1995
# Copyright (C) 1995 by Jordan K. Hubbard
#
# Permission to copy or use this software for any purpose is granted
# under the terms and conditions stated by the XFree86 Project, Inc.
# copyright, which should also be in the file COPYRIGHT in this distribution.
#
# $Id: extract_xf86311.sh,v 1.5 1995/02/10 05:02:33 jkh Exp $

PATH=/usr/X11R6/bin:/usr/X386/bin:.:$PATH

X11PREFIX=/usr/X11R6
XRELEASE="XFree86 3.1.1"

# Handle the return value from a dialog, doing some pre-processing
# so that each client doesn't have to.
handle_rval()
{ 
        case $1 in
        0)
                return 0
        ;;
        255)
                PS1="subshell# " /stand/sh
        ;;
        *)
                return 1
        ;;
        esac
}

do_selected_install()
{
	for xx in ${SELECTIONS}; do
	   DIST=`eval echo \`echo $xx\``
	   dialog --infobox "Installing ${XRELEASE} component: ${DIST}" -1 -1
	   tar --unlink -zxpf ${DIST}.tgz -C /usr
	done
}

do_configure()
{
	if [ -f ${X11PREFIX}/bin/xf86config ]; then
		dialog --clear
		${X11PREFIX}/bin/xf86config
		dialog --clear
	else
		dialog --msgbox "You must first install the X311bin component" -1 -1
	fi
}

do_select_menu()
{
dialog --title "Please select components from ${XRELEASE}" --checklist \
"Please check off each desired component of ${XRELEASE} for subsequent\n\
unpacking on your system.  Most people will typically need only one\n\
server, and the most reasonable choices have already been set for you by\n\
default.  When everything looks good, select OK to continue.\n\n\
Server notation: 4 bit = 16 color, 8 bit = 256 color,\n\
16 bit = 16k colors, 24 bit = true color." \
-1 -1 8 \
"X311bin" "client applications and shared libs" ON \
"X311fnts" "the misc and 75 dpi fonts" ON \
"X311lib" "data files needed at runtime" ON \
"X311xicf" "xinit runtime configuration file" ON \
"X311xdcf" "xdm runtime configuration file" ON \
"X3118514" "IBM 8514 and true compatibles - 8 bit" OFF \
"X311AGX"  "AGX boards - 8 bit" OFF \
"X311Ma64" "ATI Mach64 boards - 8/16 bit" OFF \
"X311Ma32" "ATI Mach32 boards - 8/16 bit" OFF \
"X311Ma8" "ATI Mach8 boards - 8bit" OFF \
"X311Mono" "VGA, Super-VGA, Hercules, and others - mono" OFF \
"X311P9K" "Weitek P9000 boards (Diamond Viper) - 8/16/24 bit" OFF \
"X311S3" "S3 boards: #9GXE, ActixGE32, SPEA Mercury - 8/16/24 bit" OFF \
"X311SVGA" "Super-VGA cards - 8 bit" ON \
"X311VG16" "VGA and Super-VGA cards - 4 bit" ON \
"X311W32" "ET4000/W32, /W32i and /W32p cards - 8 bit" OFF \
"X311nest" "A nested server running as a client." OFF \
"X311doc" "READMEs and ${XRELEASE} specific man pages" ON \
"X311man" "man pages except ${XRELEASE} specific ones in docs" OFF \
"X311f100" "100dpi fonts" OFF \
"X311fscl" "Speedo and Type1 fonts" OFF \
"X311fnon" "Japanese, Chinese and other non-english fonts" OFF \
"X311fsrv" "the font server and it's man page" OFF \
"X311prog" "config, lib*.a and *.h files needed only for compiling" OFF \
"X311link" "X server reconfiguration kit" OFF \
"X311pex"  "PEX fonts and shared libs needed by PEX apps" OFF \
"X311lbx" "low bandwidth X proxy server and libraries." OFF \
      2> ${TMP}/X-selections.$$
	RETVAL=$?
	SELECTIONS=`cat ${TMP}/X-selections.$$`
	return ${RETVAL}
}

INSTALLING=yes
while [ "${INSTALLING}" = "yes" ]; do
dialog --title "${XRELEASE} Installation" --menu \
"Welcome to the ${XRELEASE} installation menu for FreeBSD 2.x\n\n \
Please chose one of the following options.  It is also\n\
recommended that choices be followed in order on this menu," \
-1 -1 7 \
  "COPYRIGHT" "Read the XFree86 Project, Inc.'s copyright notice" \
  "README" "General README file on ${XRELEASE} - recommended" \
  "FreeBSD" "General information specific to FreeBSD" \
  "Install" "Install selected components of ${XRELEASE}" \
  "Configure" "Configure XFree86 server for your card/monitor" \
  "startx" "Try to run startx and bring things up all the way" \
  "Exit" "Exit the installation." \
      2> ${TMP}/menu.tmp.$$
	RETVAL=$?
	ANSWER=`cat ${TMP}/menu.tmp.$$`
	rm -f ${TMP}/menu.tmp.$$
	if ! handle_rval ${RETVAL}; then continue; fi
   case ${ANSWER} in
   COPYRIGHT) dialog --title "COPYRIGHT NOTICE" --textbox COPYRIGHT 20 78 ;;
   README) dialog --title "${XRELEASE} README" --textbox README 20 78 ;;
   FreeBSD) dialog --title "XFree86 and FreeBSD" --textbox README.FreeBSD 20 78 ;;
   Install) if do_select_menu; then do_selected_install; fi ;;
   Configure) do_configure ;;
   startx)
	if [ -x ${X11PREFIX}/bin/startx ]; then
		${X11PREFIX}/bin/startx
	else
		dialog --title "Error" --msgbox "You must first install ${XRELEASE}." -1 -1
	fi
	;;
   Exit) INSTALLING=no ;;
   esac
done