HardenedBSD/sys/compat/x86bios/x86bios.c

852 lines
19 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2009 Alex Keda <admin@lissyara.su>
* Copyright (c) 2009-2010 Jung-uk Kim <jkim@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_x86bios.h"
#include <sys/param.h>
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/lock.h>
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
#include <sys/malloc.h>
#include <sys/module.h>
#include <sys/mutex.h>
#include <sys/sysctl.h>
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
#include <contrib/x86emu/x86emu.h>
#include <contrib/x86emu/x86emu_regs.h>
#include <compat/x86bios/x86bios.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#ifdef __amd64__
#define X86BIOS_NATIVE_ARCH
#endif
#ifdef __i386__
#define X86BIOS_NATIVE_VM86
#endif
#define X86BIOS_MEM_SIZE 0x00100000 /* 1M */
2010-08-10 00:06:08 +02:00
#define X86BIOS_TRACE(h, n, r) do { \
printf(__STRING(h) \
" (ax=0x%04x bx=0x%04x cx=0x%04x dx=0x%04x es=0x%04x di=0x%04x)\n",\
(n), (r)->R_AX, (r)->R_BX, (r)->R_CX, (r)->R_DX, \
(r)->R_ES, (r)->R_DI); \
} while (0)
static struct mtx x86bios_lock;
static SYSCTL_NODE(_debug, OID_AUTO, x86bios, CTLFLAG_RD, NULL,
"x86bios debugging");
static int x86bios_trace_call;
SYSCTL_INT(_debug_x86bios, OID_AUTO, call, CTLFLAG_RWTUN, &x86bios_trace_call, 0,
"Trace far function calls");
static int x86bios_trace_int;
SYSCTL_INT(_debug_x86bios, OID_AUTO, int, CTLFLAG_RWTUN, &x86bios_trace_int, 0,
"Trace software interrupt handlers");
#ifdef X86BIOS_NATIVE_VM86
#include <machine/vm86.h>
#include <machine/vmparam.h>
#include <machine/pc/bios.h>
struct vm86context x86bios_vmc;
static void
x86bios_emu2vmf(struct x86emu_regs *regs, struct vm86frame *vmf)
{
vmf->vmf_ds = regs->R_DS;
vmf->vmf_es = regs->R_ES;
vmf->vmf_ax = regs->R_AX;
vmf->vmf_bx = regs->R_BX;
vmf->vmf_cx = regs->R_CX;
vmf->vmf_dx = regs->R_DX;
vmf->vmf_bp = regs->R_BP;
vmf->vmf_si = regs->R_SI;
vmf->vmf_di = regs->R_DI;
}
static void
x86bios_vmf2emu(struct vm86frame *vmf, struct x86emu_regs *regs)
{
regs->R_DS = vmf->vmf_ds;
regs->R_ES = vmf->vmf_es;
regs->R_FLG = vmf->vmf_flags;
regs->R_AX = vmf->vmf_ax;
regs->R_BX = vmf->vmf_bx;
regs->R_CX = vmf->vmf_cx;
regs->R_DX = vmf->vmf_dx;
regs->R_BP = vmf->vmf_bp;
regs->R_SI = vmf->vmf_si;
regs->R_DI = vmf->vmf_di;
}
void *
x86bios_alloc(uint32_t *offset, size_t size, int flags)
{
void *vaddr;
u_int i;
if (offset == NULL || size == 0)
return (NULL);
vaddr = contigmalloc(size, M_DEVBUF, flags, 0, X86BIOS_MEM_SIZE,
PAGE_SIZE, 0);
if (vaddr != NULL) {
*offset = vtophys(vaddr);
mtx_lock(&x86bios_lock);
for (i = 0; i < atop(round_page(size)); i++)
vm86_addpage(&x86bios_vmc, atop(*offset) + i,
(vm_offset_t)vaddr + ptoa(i));
mtx_unlock(&x86bios_lock);
}
return (vaddr);
}
void
x86bios_free(void *addr, size_t size)
{
vm_paddr_t paddr;
int i, nfree;
if (addr == NULL || size == 0)
return;
paddr = vtophys(addr);
if (paddr >= X86BIOS_MEM_SIZE || (paddr & PAGE_MASK) != 0)
return;
mtx_lock(&x86bios_lock);
for (i = 0; i < x86bios_vmc.npages; i++)
if (x86bios_vmc.pmap[i].kva == (vm_offset_t)addr)
break;
if (i >= x86bios_vmc.npages) {
mtx_unlock(&x86bios_lock);
return;
}
nfree = atop(round_page(size));
bzero(x86bios_vmc.pmap + i, sizeof(*x86bios_vmc.pmap) * nfree);
if (i + nfree == x86bios_vmc.npages) {
x86bios_vmc.npages -= nfree;
while (--i >= 0 && x86bios_vmc.pmap[i].kva == 0)
x86bios_vmc.npages--;
}
mtx_unlock(&x86bios_lock);
contigfree(addr, size, M_DEVBUF);
}
void
x86bios_init_regs(struct x86regs *regs)
{
bzero(regs, sizeof(*regs));
}
void
x86bios_call(struct x86regs *regs, uint16_t seg, uint16_t off)
{
struct vm86frame vmf;
if (x86bios_trace_call)
2010-08-10 00:06:08 +02:00
X86BIOS_TRACE(Calling 0x%06x, (seg << 4) + off, regs);
bzero(&vmf, sizeof(vmf));
x86bios_emu2vmf((struct x86emu_regs *)regs, &vmf);
vmf.vmf_cs = seg;
vmf.vmf_ip = off;
mtx_lock(&x86bios_lock);
vm86_datacall(-1, &vmf, &x86bios_vmc);
mtx_unlock(&x86bios_lock);
x86bios_vmf2emu(&vmf, (struct x86emu_regs *)regs);
if (x86bios_trace_call)
2010-08-10 00:06:08 +02:00
X86BIOS_TRACE(Exiting 0x%06x, (seg << 4) + off, regs);
}
uint32_t
x86bios_get_intr(int intno)
{
return (readl(BIOS_PADDRTOVADDR(intno * 4)));
}
void
x86bios_set_intr(int intno, uint32_t saddr)
{
writel(BIOS_PADDRTOVADDR(intno * 4), saddr);
}
void
x86bios_intr(struct x86regs *regs, int intno)
{
struct vm86frame vmf;
if (x86bios_trace_int)
2010-08-10 00:06:08 +02:00
X86BIOS_TRACE(Calling INT 0x%02x, intno, regs);
bzero(&vmf, sizeof(vmf));
x86bios_emu2vmf((struct x86emu_regs *)regs, &vmf);
mtx_lock(&x86bios_lock);
vm86_datacall(intno, &vmf, &x86bios_vmc);
mtx_unlock(&x86bios_lock);
x86bios_vmf2emu(&vmf, (struct x86emu_regs *)regs);
if (x86bios_trace_int)
2010-08-10 00:06:08 +02:00
X86BIOS_TRACE(Exiting INT 0x%02x, intno, regs);
}
void *
x86bios_offset(uint32_t offset)
{
vm_offset_t addr;
addr = vm86_getaddr(&x86bios_vmc, X86BIOS_PHYSTOSEG(offset),
X86BIOS_PHYSTOOFF(offset));
if (addr == 0)
addr = BIOS_PADDRTOVADDR(offset);
return ((void *)addr);
}
static int
x86bios_init(void)
{
mtx_init(&x86bios_lock, "x86bios lock", NULL, MTX_DEF);
bzero(&x86bios_vmc, sizeof(x86bios_vmc));
return (0);
}
static int
x86bios_uninit(void)
{
mtx_destroy(&x86bios_lock);
return (0);
}
#else
#include <machine/iodev.h>
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
#define X86BIOS_PAGE_SIZE 0x00001000 /* 4K */
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
#define X86BIOS_IVT_SIZE 0x00000500 /* 1K + 256 (BDA) */
#define X86BIOS_IVT_BASE 0x00000000
#define X86BIOS_RAM_BASE 0x00001000
#define X86BIOS_ROM_BASE 0x000a0000
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
2010-08-10 00:06:08 +02:00
#define X86BIOS_ROM_SIZE (X86BIOS_MEM_SIZE - x86bios_rom_phys)
#define X86BIOS_SEG_SIZE X86BIOS_PAGE_SIZE
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
#define X86BIOS_PAGES (X86BIOS_MEM_SIZE / X86BIOS_PAGE_SIZE)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
#define X86BIOS_R_SS _pad2
#define X86BIOS_R_SP _pad3.I16_reg.x_reg
static struct x86emu x86bios_emu;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
static void *x86bios_ivt;
static void *x86bios_rom;
static void *x86bios_seg;
static vm_offset_t *x86bios_map;
static vm_paddr_t x86bios_rom_phys;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
static vm_paddr_t x86bios_seg_phys;
static int x86bios_fault;
static uint32_t x86bios_fault_addr;
static uint16_t x86bios_fault_cs;
static uint16_t x86bios_fault_ip;
static void
x86bios_set_fault(struct x86emu *emu, uint32_t addr)
{
x86bios_fault = 1;
x86bios_fault_addr = addr;
x86bios_fault_cs = emu->x86.R_CS;
x86bios_fault_ip = emu->x86.R_IP;
x86emu_halt_sys(emu);
}
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
static void *
x86bios_get_pages(uint32_t offset, size_t size)
{
vm_offset_t addr;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
if (offset + size > X86BIOS_MEM_SIZE + X86BIOS_IVT_SIZE)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
return (NULL);
if (offset >= X86BIOS_MEM_SIZE)
offset -= X86BIOS_MEM_SIZE;
addr = x86bios_map[offset / X86BIOS_PAGE_SIZE];
if (addr != 0)
addr += offset % X86BIOS_PAGE_SIZE;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
return ((void *)addr);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
}
static void
x86bios_set_pages(vm_offset_t va, vm_paddr_t pa, size_t size)
{
int i, j;
for (i = pa / X86BIOS_PAGE_SIZE, j = 0;
j < howmany(size, X86BIOS_PAGE_SIZE); i++, j++)
x86bios_map[i] = va + j * X86BIOS_PAGE_SIZE;
}
static uint8_t
x86bios_emu_rdb(struct x86emu *emu, uint32_t addr)
{
uint8_t *va;
va = x86bios_get_pages(addr, sizeof(*va));
if (va == NULL)
x86bios_set_fault(emu, addr);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
return (*va);
}
static uint16_t
x86bios_emu_rdw(struct x86emu *emu, uint32_t addr)
{
uint16_t *va;
va = x86bios_get_pages(addr, sizeof(*va));
if (va == NULL)
x86bios_set_fault(emu, addr);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
#ifndef __NO_STRICT_ALIGNMENT
if ((addr & 1) != 0)
return (le16dec(va));
else
#endif
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
return (le16toh(*va));
}
static uint32_t
x86bios_emu_rdl(struct x86emu *emu, uint32_t addr)
{
uint32_t *va;
va = x86bios_get_pages(addr, sizeof(*va));
if (va == NULL)
x86bios_set_fault(emu, addr);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
#ifndef __NO_STRICT_ALIGNMENT
if ((addr & 3) != 0)
return (le32dec(va));
else
#endif
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
return (le32toh(*va));
}
static void
x86bios_emu_wrb(struct x86emu *emu, uint32_t addr, uint8_t val)
{
uint8_t *va;
va = x86bios_get_pages(addr, sizeof(*va));
if (va == NULL)
x86bios_set_fault(emu, addr);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
*va = val;
}
static void
x86bios_emu_wrw(struct x86emu *emu, uint32_t addr, uint16_t val)
{
uint16_t *va;
va = x86bios_get_pages(addr, sizeof(*va));
if (va == NULL)
x86bios_set_fault(emu, addr);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
#ifndef __NO_STRICT_ALIGNMENT
if ((addr & 1) != 0)
le16enc(va, val);
else
#endif
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
*va = htole16(val);
}
static void
x86bios_emu_wrl(struct x86emu *emu, uint32_t addr, uint32_t val)
{
uint32_t *va;
va = x86bios_get_pages(addr, sizeof(*va));
if (va == NULL)
x86bios_set_fault(emu, addr);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
#ifndef __NO_STRICT_ALIGNMENT
if ((addr & 3) != 0)
le32enc(va, val);
else
#endif
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
*va = htole32(val);
}
static uint8_t
x86bios_emu_inb(struct x86emu *emu, uint16_t port)
{
2010-08-07 06:05:58 +02:00
#ifndef X86BIOS_NATIVE_ARCH
if (port == 0xb2) /* APM scratch register */
return (0);
if (port >= 0x80 && port < 0x88) /* POST status register */
return (0);
2010-08-07 06:05:58 +02:00
#endif
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
return (iodev_read_1(port));
}
static uint16_t
x86bios_emu_inw(struct x86emu *emu, uint16_t port)
{
uint16_t val;
2010-08-07 06:05:58 +02:00
#ifndef X86BIOS_NATIVE_ARCH
if (port >= 0x80 && port < 0x88) /* POST status register */
return (0);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
if ((port & 1) != 0) {
val = iodev_read_1(port);
val |= iodev_read_1(port + 1) << 8;
} else
#endif
val = iodev_read_2(port);
return (val);
}
static uint32_t
x86bios_emu_inl(struct x86emu *emu, uint16_t port)
{
uint32_t val;
2010-08-07 06:05:58 +02:00
#ifndef X86BIOS_NATIVE_ARCH
if (port >= 0x80 && port < 0x88) /* POST status register */
return (0);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
if ((port & 1) != 0) {
val = iodev_read_1(port);
val |= iodev_read_2(port + 1) << 8;
val |= iodev_read_1(port + 3) << 24;
} else if ((port & 2) != 0) {
val = iodev_read_2(port);
val |= iodev_read_2(port + 2) << 16;
} else
#endif
val = iodev_read_4(port);
return (val);
}
static void
x86bios_emu_outb(struct x86emu *emu, uint16_t port, uint8_t val)
{
2010-08-07 06:05:58 +02:00
#ifndef X86BIOS_NATIVE_ARCH
if (port == 0xb2) /* APM scratch register */
return;
if (port >= 0x80 && port < 0x88) /* POST status register */
return;
2010-08-07 06:05:58 +02:00
#endif
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
iodev_write_1(port, val);
}
static void
x86bios_emu_outw(struct x86emu *emu, uint16_t port, uint16_t val)
{
2010-08-07 06:05:58 +02:00
#ifndef X86BIOS_NATIVE_ARCH
if (port >= 0x80 && port < 0x88) /* POST status register */
return;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
if ((port & 1) != 0) {
iodev_write_1(port, val);
iodev_write_1(port + 1, val >> 8);
} else
#endif
iodev_write_2(port, val);
}
static void
x86bios_emu_outl(struct x86emu *emu, uint16_t port, uint32_t val)
{
2010-08-07 06:05:58 +02:00
#ifndef X86BIOS_NATIVE_ARCH
if (port >= 0x80 && port < 0x88) /* POST status register */
return;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
if ((port & 1) != 0) {
iodev_write_1(port, val);
iodev_write_2(port + 1, val >> 8);
iodev_write_1(port + 3, val >> 24);
} else if ((port & 2) != 0) {
iodev_write_2(port, val);
iodev_write_2(port + 2, val >> 16);
} else
#endif
iodev_write_4(port, val);
}
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
void *
x86bios_alloc(uint32_t *offset, size_t size, int flags)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
{
void *vaddr;
if (offset == NULL || size == 0)
return (NULL);
vaddr = contigmalloc(size, M_DEVBUF, flags, X86BIOS_RAM_BASE,
x86bios_rom_phys, X86BIOS_PAGE_SIZE, 0);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
if (vaddr != NULL) {
*offset = vtophys(vaddr);
mtx_lock(&x86bios_lock);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
x86bios_set_pages((vm_offset_t)vaddr, *offset, size);
mtx_unlock(&x86bios_lock);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
}
return (vaddr);
}
void
x86bios_free(void *addr, size_t size)
{
vm_paddr_t paddr;
if (addr == NULL || size == 0)
return;
paddr = vtophys(addr);
if (paddr < X86BIOS_RAM_BASE || paddr >= x86bios_rom_phys ||
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
paddr % X86BIOS_PAGE_SIZE != 0)
return;
mtx_lock(&x86bios_lock);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
bzero(x86bios_map + paddr / X86BIOS_PAGE_SIZE,
sizeof(*x86bios_map) * howmany(size, X86BIOS_PAGE_SIZE));
mtx_unlock(&x86bios_lock);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
contigfree(addr, size, M_DEVBUF);
}
void
x86bios_init_regs(struct x86regs *regs)
{
bzero(regs, sizeof(*regs));
regs->X86BIOS_R_SS = X86BIOS_PHYSTOSEG(x86bios_seg_phys);
regs->X86BIOS_R_SP = X86BIOS_PAGE_SIZE - 2;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
}
void
x86bios_call(struct x86regs *regs, uint16_t seg, uint16_t off)
{
if (x86bios_trace_call)
2010-08-10 00:06:08 +02:00
X86BIOS_TRACE(Calling 0x%06x, (seg << 4) + off, regs);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
mtx_lock(&x86bios_lock);
memcpy((struct x86regs *)&x86bios_emu.x86, regs, sizeof(*regs));
x86bios_fault = 0;
spinlock_enter();
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
x86emu_exec_call(&x86bios_emu, seg, off);
spinlock_exit();
memcpy(regs, &x86bios_emu.x86, sizeof(*regs));
mtx_unlock(&x86bios_lock);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
if (x86bios_trace_call) {
2010-08-10 00:06:08 +02:00
X86BIOS_TRACE(Exiting 0x%06x, (seg << 4) + off, regs);
if (x86bios_fault)
2010-08-10 00:06:08 +02:00
printf("Page fault at 0x%06x from 0x%04x:0x%04x.\n",
x86bios_fault_addr, x86bios_fault_cs,
x86bios_fault_ip);
}
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
}
uint32_t
x86bios_get_intr(int intno)
{
return (le32toh(*((uint32_t *)x86bios_ivt + intno)));
}
void
x86bios_set_intr(int intno, uint32_t saddr)
{
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
*((uint32_t *)x86bios_ivt + intno) = htole32(saddr);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
}
void
x86bios_intr(struct x86regs *regs, int intno)
{
if (intno < 0 || intno > 255)
return;
if (x86bios_trace_int)
2010-08-10 00:06:08 +02:00
X86BIOS_TRACE(Calling INT 0x%02x, intno, regs);
mtx_lock(&x86bios_lock);
memcpy((struct x86regs *)&x86bios_emu.x86, regs, sizeof(*regs));
x86bios_fault = 0;
spinlock_enter();
x86emu_exec_intr(&x86bios_emu, intno);
spinlock_exit();
memcpy(regs, &x86bios_emu.x86, sizeof(*regs));
mtx_unlock(&x86bios_lock);
if (x86bios_trace_int) {
2010-08-10 00:06:08 +02:00
X86BIOS_TRACE(Exiting INT 0x%02x, intno, regs);
if (x86bios_fault)
2010-08-10 00:06:08 +02:00
printf("Page fault at 0x%06x from 0x%04x:0x%04x.\n",
x86bios_fault_addr, x86bios_fault_cs,
x86bios_fault_ip);
}
}
void *
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
x86bios_offset(uint32_t offset)
{
return (x86bios_get_pages(offset, 1));
}
static __inline void
x86bios_unmap_mem(void)
{
free(x86bios_map, M_DEVBUF);
if (x86bios_ivt != NULL)
#ifdef X86BIOS_NATIVE_ARCH
pmap_unmapbios((vm_offset_t)x86bios_ivt, X86BIOS_IVT_SIZE);
#else
free(x86bios_ivt, M_DEVBUF);
#endif
if (x86bios_rom != NULL)
pmap_unmapdev((vm_offset_t)x86bios_rom, X86BIOS_ROM_SIZE);
if (x86bios_seg != NULL)
contigfree(x86bios_seg, X86BIOS_SEG_SIZE, M_DEVBUF);
}
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
static __inline int
x86bios_map_mem(void)
{
x86bios_map = malloc(sizeof(*x86bios_map) * X86BIOS_PAGES, M_DEVBUF,
M_WAITOK | M_ZERO);
#ifdef X86BIOS_NATIVE_ARCH
x86bios_ivt = pmap_mapbios(X86BIOS_IVT_BASE, X86BIOS_IVT_SIZE);
/* Probe EBDA via BDA. */
x86bios_rom_phys = *(uint16_t *)((caddr_t)x86bios_ivt + 0x40e);
x86bios_rom_phys = x86bios_rom_phys << 4;
if (x86bios_rom_phys != 0 && x86bios_rom_phys < X86BIOS_ROM_BASE &&
X86BIOS_ROM_BASE - x86bios_rom_phys <= 128 * 1024)
x86bios_rom_phys =
rounddown(x86bios_rom_phys, X86BIOS_PAGE_SIZE);
else
#else
x86bios_ivt = malloc(X86BIOS_IVT_SIZE, M_DEVBUF, M_ZERO | M_WAITOK);
#endif
x86bios_rom_phys = X86BIOS_ROM_BASE;
x86bios_rom = pmap_mapdev(x86bios_rom_phys, X86BIOS_ROM_SIZE);
if (x86bios_rom == NULL)
goto fail;
#ifdef X86BIOS_NATIVE_ARCH
/* Change attribute for EBDA. */
if (x86bios_rom_phys < X86BIOS_ROM_BASE &&
pmap_change_attr((vm_offset_t)x86bios_rom,
X86BIOS_ROM_BASE - x86bios_rom_phys, PAT_WRITE_BACK) != 0)
goto fail;
#endif
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
x86bios_seg = contigmalloc(X86BIOS_SEG_SIZE, M_DEVBUF, M_WAITOK,
X86BIOS_RAM_BASE, x86bios_rom_phys, X86BIOS_PAGE_SIZE, 0);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
x86bios_seg_phys = vtophys(x86bios_seg);
x86bios_set_pages((vm_offset_t)x86bios_ivt, X86BIOS_IVT_BASE,
X86BIOS_IVT_SIZE);
x86bios_set_pages((vm_offset_t)x86bios_rom, x86bios_rom_phys,
X86BIOS_ROM_SIZE);
x86bios_set_pages((vm_offset_t)x86bios_seg, x86bios_seg_phys,
X86BIOS_SEG_SIZE);
if (bootverbose) {
2010-08-10 00:06:08 +02:00
printf("x86bios: IVT 0x%06jx-0x%06jx at %p\n",
(vm_paddr_t)X86BIOS_IVT_BASE,
(vm_paddr_t)X86BIOS_IVT_SIZE + X86BIOS_IVT_BASE - 1,
x86bios_ivt);
2010-08-10 00:06:08 +02:00
printf("x86bios: SSEG 0x%06jx-0x%06jx at %p\n",
x86bios_seg_phys,
(vm_paddr_t)X86BIOS_SEG_SIZE + x86bios_seg_phys - 1,
x86bios_seg);
if (x86bios_rom_phys < X86BIOS_ROM_BASE)
2010-08-10 00:06:08 +02:00
printf("x86bios: EBDA 0x%06jx-0x%06jx at %p\n",
x86bios_rom_phys, (vm_paddr_t)X86BIOS_ROM_BASE - 1,
x86bios_rom);
2010-08-10 00:06:08 +02:00
printf("x86bios: ROM 0x%06jx-0x%06jx at %p\n",
(vm_paddr_t)X86BIOS_ROM_BASE,
(vm_paddr_t)X86BIOS_MEM_SIZE - X86BIOS_SEG_SIZE - 1,
(caddr_t)x86bios_rom + X86BIOS_ROM_BASE - x86bios_rom_phys);
}
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
return (0);
fail:
x86bios_unmap_mem();
return (1);
}
static int
x86bios_init(void)
{
mtx_init(&x86bios_lock, "x86bios lock", NULL, MTX_DEF);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
if (x86bios_map_mem() != 0)
return (ENOMEM);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
bzero(&x86bios_emu, sizeof(x86bios_emu));
x86bios_emu.emu_rdb = x86bios_emu_rdb;
x86bios_emu.emu_rdw = x86bios_emu_rdw;
x86bios_emu.emu_rdl = x86bios_emu_rdl;
x86bios_emu.emu_wrb = x86bios_emu_wrb;
x86bios_emu.emu_wrw = x86bios_emu_wrw;
x86bios_emu.emu_wrl = x86bios_emu_wrl;
x86bios_emu.emu_inb = x86bios_emu_inb;
x86bios_emu.emu_inw = x86bios_emu_inw;
x86bios_emu.emu_inl = x86bios_emu_inl;
x86bios_emu.emu_outb = x86bios_emu_outb;
x86bios_emu.emu_outw = x86bios_emu_outw;
x86bios_emu.emu_outl = x86bios_emu_outl;
return (0);
}
static int
x86bios_uninit(void)
{
x86bios_unmap_mem();
mtx_destroy(&x86bios_lock);
return (0);
}
#endif
void *
x86bios_get_orm(uint32_t offset)
{
uint8_t *p;
/* Does the shadow ROM contain BIOS POST code for x86? */
p = x86bios_offset(offset);
if (p == NULL || p[0] != 0x55 || p[1] != 0xaa ||
(p[3] != 0xe9 && p[3] != 0xeb))
return (NULL);
return (p);
}
int
x86bios_match_device(uint32_t offset, device_t dev)
{
uint8_t *p;
uint16_t device, vendor;
uint8_t class, progif, subclass;
/* Does the shadow ROM contain BIOS POST code for x86? */
p = x86bios_get_orm(offset);
if (p == NULL)
return (0);
/* Does it contain PCI data structure? */
p += le16toh(*(uint16_t *)(p + 0x18));
if (bcmp(p, "PCIR", 4) != 0 ||
le16toh(*(uint16_t *)(p + 0x0a)) < 0x18 || *(p + 0x14) != 0)
return (0);
/* Does it match the vendor, device, and classcode? */
vendor = le16toh(*(uint16_t *)(p + 0x04));
device = le16toh(*(uint16_t *)(p + 0x06));
progif = *(p + 0x0d);
subclass = *(p + 0x0e);
class = *(p + 0x0f);
if (vendor != pci_get_vendor(dev) || device != pci_get_device(dev) ||
class != pci_get_class(dev) || subclass != pci_get_subclass(dev) ||
progif != pci_get_progif(dev))
return (0);
return (1);
}
static int
x86bios_modevent(module_t mod __unused, int type, void *data __unused)
{
switch (type) {
case MOD_LOAD:
return (x86bios_init());
case MOD_UNLOAD:
return (x86bios_uninit());
default:
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 22:58:10 +02:00
return (ENOTSUP);
}
}
static moduledata_t x86bios_mod = {
"x86bios",
x86bios_modevent,
NULL,
};
DECLARE_MODULE(x86bios, x86bios_mod, SI_SUB_CPU, SI_ORDER_ANY);
MODULE_VERSION(x86bios, 1);