hardenedbsd/HardenedBSD
1
0
Fork 0
mirror of https://git.hardenedbsd.org/hardenedbsd/HardenedBSD.git synced 2024-11-25 01:55:19 +01:00
Code Issues Actions Packages Projects Releases Wiki Activity
e9da7d714e
HardenedBSD/sys/opencrypto/xform.h

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

45 lines
1.5 KiB
C
Raw Normal View History

In-kernel crypto framework derived from openbsd. This facility provides a consistent interface to h/w and s/w crypto algorithms for use by the kernel and (for h/w at least) by user-mode apps. Access for user-level code is through a /dev/crypto device that'll eventually be used by openssl to (potentially) accelerate many applications. Coming soon is an IPsec that makes use of this service to accelerate ESP, AH, and IPCOMP protocols. Included here is the "core" crypto support, /dev/crypto driver, various crypto algorithms that are not already present in the KAME crypto area, and support routines used by crypto device drivers. Obtained from: openbsd
2002-10-04 22:31:23 +02:00
/* $OpenBSD: xform.h,v 1.8 2001/08/28 12:20:43 ben Exp $ */
/* -> /*- for license, minor formatting changes
2005-01-07 03:29:27 +01:00
/*-
In-kernel crypto framework derived from openbsd. This facility provides a consistent interface to h/w and s/w crypto algorithms for use by the kernel and (for h/w at least) by user-mode apps. Access for user-level code is through a /dev/crypto device that'll eventually be used by openssl to (potentially) accelerate many applications. Coming soon is an IPsec that makes use of this service to accelerate ESP, AH, and IPCOMP protocols. Included here is the "core" crypto support, /dev/crypto driver, various crypto algorithms that are not already present in the KAME crypto area, and support routines used by crypto device drivers. Obtained from: openbsd
2002-10-04 22:31:23 +02:00
* The author of this code is Angelos D. Keromytis (angelos@cis.upenn.edu)
*
* This code was written by Angelos D. Keromytis in Athens, Greece, in
* February 2000. Network Security Technologies Inc. (NSTI) kindly
* supported the development of this code.
*
* Copyright (c) 2000 Angelos D. Keromytis
Add some new modes to OpenCrypto. These modes are AES-ICM (can be used for counter mode), and AES-GCM. Both of these modes have been added to the aesni module. Included is a set of tests to validate that the software and aesni module calculate the correct values. These use the NIST KAT test vectors. To run the test, you will need to install a soon to be committed port, nist-kat that will install the vectors. Using a port is necessary as the test vectors are around 25MB. All the man pages were updated. I have added a new man page, crypto.7, which includes a description of how to use each mode. All the new modes and some other AES modes are present. It would be good for someone else to go through and document the other modes. A new ioctl was added to support AEAD modes which AES-GCM is one of them. Without this ioctl, it is not possible to test AEAD modes from userland. Add a timing safe bcmp for use to compare MACs. Previously we were using bcmp which could leak timing info and result in the ability to forge messages. Add a minor optimization to the aesni module so that single segment mbufs don't get copied and instead are updated in place. The aesni module needs to be updated to support blocked IO so segmented mbufs don't have to be copied. We require that the IV be specified for all calls for both GCM and ICM. This is to ensure proper use of these functions. Obtained from: p4: //depot/projects/opencrypto Relnotes: yes Sponsored by: FreeBSD Foundation Sponsored by: NetGate
2014-12-12 20:56:36 +01:00
* Copyright (c) 2014 The FreeBSD Foundation
* All rights reserved.
*
* Portions of this software were developed by John-Mark Gurney
* under sponsorship of the FreeBSD Foundation and
* Rubicon Communications, LLC (Netgate).
In-kernel crypto framework derived from openbsd. This facility provides a consistent interface to h/w and s/w crypto algorithms for use by the kernel and (for h/w at least) by user-mode apps. Access for user-level code is through a /dev/crypto device that'll eventually be used by openssl to (potentially) accelerate many applications. Coming soon is an IPsec that makes use of this service to accelerate ESP, AH, and IPCOMP protocols. Included here is the "core" crypto support, /dev/crypto driver, various crypto algorithms that are not already present in the KAME crypto area, and support routines used by crypto device drivers. Obtained from: openbsd
2002-10-04 22:31:23 +02:00
*
* Permission to use, copy, and modify this software without fee
* is hereby granted, provided that this entire notice is included in
* all source code copies of any software which is or includes a copy or
* modification of this software.
*
* THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR
* IMPLIED WARRANTY. IN PARTICULAR, NONE OF THE AUTHORS MAKES ANY
* REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE
* MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR
* PURPOSE.
*/
#ifndef _CRYPTO_XFORM_H_
#define _CRYPTO_XFORM_H_
#include <crypto/sha1.h>
Replace sys/crypto/sha2/sha2.c with lib/libmd/sha512c.c cperciva's libmd implementation is 5-30% faster The same was done for SHA256 previously in r263218 cperciva's implementation was lacking SHA-384 which I implemented, validated against OpenSSL and the NIST documentation Extend sbin/md5 to create sha384(1) Chase dependancies on sys/crypto/sha2/sha2.{c,h} and replace them with sha512{c.c,.h} Reviewed by: cperciva, des, delphij Approved by: secteam, bapt (mentor) MFC after: 2 weeks Sponsored by: ScaleEngine Inc. Differential Revision: https://reviews.freebsd.org/D3929
2015-12-27 18:33:59 +01:00
#include <crypto/sha2/sha256.h>
#include <crypto/sha2/sha384.h>
#include <crypto/sha2/sha512.h>
In-kernel crypto framework derived from openbsd. This facility provides a consistent interface to h/w and s/w crypto algorithms for use by the kernel and (for h/w at least) by user-mode apps. Access for user-level code is through a /dev/crypto device that'll eventually be used by openssl to (potentially) accelerate many applications. Coming soon is an IPsec that makes use of this service to accelerate ESP, AH, and IPCOMP protocols. Included here is the "core" crypto support, /dev/crypto driver, various crypto algorithms that are not already present in the KAME crypto area, and support routines used by crypto device drivers. Obtained from: openbsd
2002-10-04 22:31:23 +02:00
#include <opencrypto/rmd160.h>
Add some new modes to OpenCrypto. These modes are AES-ICM (can be used for counter mode), and AES-GCM. Both of these modes have been added to the aesni module. Included is a set of tests to validate that the software and aesni module calculate the correct values. These use the NIST KAT test vectors. To run the test, you will need to install a soon to be committed port, nist-kat that will install the vectors. Using a port is necessary as the test vectors are around 25MB. All the man pages were updated. I have added a new man page, crypto.7, which includes a description of how to use each mode. All the new modes and some other AES modes are present. It would be good for someone else to go through and document the other modes. A new ioctl was added to support AEAD modes which AES-GCM is one of them. Without this ioctl, it is not possible to test AEAD modes from userland. Add a timing safe bcmp for use to compare MACs. Previously we were using bcmp which could leak timing info and result in the ability to forge messages. Add a minor optimization to the aesni module so that single segment mbufs don't get copied and instead are updated in place. The aesni module needs to be updated to support blocked IO so segmented mbufs don't have to be copied. We require that the IV be specified for all calls for both GCM and ICM. This is to ensure proper use of these functions. Obtained from: p4: //depot/projects/opencrypto Relnotes: yes Sponsored by: FreeBSD Foundation Sponsored by: NetGate
2014-12-12 20:56:36 +01:00
#include <opencrypto/gmac.h>
In-kernel crypto framework derived from openbsd. This facility provides a consistent interface to h/w and s/w crypto algorithms for use by the kernel and (for h/w at least) by user-mode apps. Access for user-level code is through a /dev/crypto device that'll eventually be used by openssl to (potentially) accelerate many applications. Coming soon is an IPsec that makes use of this service to accelerate ESP, AH, and IPCOMP protocols. Included here is the "core" crypto support, /dev/crypto driver, various crypto algorithms that are not already present in the KAME crypto area, and support routines used by crypto device drivers. Obtained from: openbsd
2002-10-04 22:31:23 +02:00
Break up opencrypto/xform.c so it can be reused piecemeal Keep xform.c as a meta-file including the broken out bits existing code that includes xform.c continues to work as normal Individual algorithms can now be reused elsewhere, including outside of the kernel Reviewed by: bapt (previous version), gnn, delphij Approved by: secteam MFC after: 1 week Sponsored by: ScaleEngine Inc. Differential Revision: https://reviews.freebsd.org/D4674
2015-12-30 23:43:07 +01:00
#include <opencrypto/xform_auth.h>
#include <opencrypto/xform_comp.h>
#include <opencrypto/xform_enc.h>
In-kernel crypto framework derived from openbsd. This facility provides a consistent interface to h/w and s/w crypto algorithms for use by the kernel and (for h/w at least) by user-mode apps. Access for user-level code is through a /dev/crypto device that'll eventually be used by openssl to (potentially) accelerate many applications. Coming soon is an IPsec that makes use of this service to accelerate ESP, AH, and IPCOMP protocols. Included here is the "core" crypto support, /dev/crypto driver, various crypto algorithms that are not already present in the KAME crypto area, and support routines used by crypto device drivers. Obtained from: openbsd
2002-10-04 22:31:23 +02:00
#endif /* _CRYPTO_XFORM_H_ */
Reference in New Issue Copy Permalink