HardenedBSD/secure/ssh.mk

# Common Make variables for OpenSSH

.include <src.opts.mk>

SSHDIR=		${SRCTOP}/crypto/openssh

CFLAGS+= -I${SSHDIR} -include ssh_namespace.h
SRCS+=	 ssh_namespace.h

.if ${MK_USB} != "no"
# Built-in security key support
CFLAGS+= -include sk_config.h
.endif
ssh: move common Makefile boilerplate to a new ssh.mk This moves SSHDIR and ssh_namespace.h handling to a common location, and will simplify future work such as adding U2F support (D32509). Reviewed by: kevans MFC after: 1 week Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D32808 2021-11-02 19:48:33 +01:00			`# Common Make variables for OpenSSH`

ssh: enable FIDO/U2F keys Description of FIDO/U2F support (from OpenSSH 8.2 release notes, https://www.openssh.com/txt/release-8.2): This release adds support for FIDO/U2F hardware authenticators to OpenSSH. U2F/FIDO are open standards for inexpensive two-factor authentication hardware that are widely used for website authentication. In OpenSSH FIDO devices are supported by new public key types "ecdsa-sk" and "ed25519-sk", along with corresponding certificate types. ssh-keygen(1) may be used to generate a FIDO token-backed key, after which they may be used much like any other key type supported by OpenSSH, so long as the hardware token is attached when the keys are used. FIDO tokens also generally require the user explicitly authorise operations by touching or tapping them. Generating a FIDO key requires the token be attached, and will usually require the user tap the token to confirm the operation: $ ssh-keygen -t ecdsa-sk -f ~/.ssh/id_ecdsa_sk Generating public/private ecdsa-sk key pair. You may need to touch your security key to authorize key generation. Enter file in which to save the key (/home/djm/.ssh/id_ecdsa_sk): Enter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in /home/djm/.ssh/id_ecdsa_sk Your public key has been saved in /home/djm/.ssh/id_ecdsa_sk.pub This will yield a public and private key-pair. The private key file should be useless to an attacker who does not have access to the physical token. After generation, this key may be used like any other supported key in OpenSSH and may be listed in authorized_keys, added to ssh-agent(1), etc. The only additional stipulation is that the FIDO token that the key belongs to must be attached when the key is used. To enable FIDO/U2F support, this change regenerates ssh_namespace.h, adds ssh-sk-helper, and sets ENABLE_SK_INTERNAL (unless building WITHOUT_USB). devd integration is not included in this change, and is under investigation for the base system. In the interim the security/u2f-devd port can be installed to provide appropriate devd rules. Reviewed by: delphij, kevans Relnotes: Yes Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D32509 2021-10-07 05:31:17 +02:00			`.include <src.opts.mk>`

ssh: move common Makefile boilerplate to a new ssh.mk This moves SSHDIR and ssh_namespace.h handling to a common location, and will simplify future work such as adding U2F support (D32509). Reviewed by: kevans MFC after: 1 week Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D32808 2021-11-02 19:48:33 +01:00			`SSHDIR= ${SRCTOP}/crypto/openssh`

			`CFLAGS+= -I${SSHDIR} -include ssh_namespace.h`
			`SRCS+= ssh_namespace.h`
ssh: enable FIDO/U2F keys Description of FIDO/U2F support (from OpenSSH 8.2 release notes, https://www.openssh.com/txt/release-8.2): This release adds support for FIDO/U2F hardware authenticators to OpenSSH. U2F/FIDO are open standards for inexpensive two-factor authentication hardware that are widely used for website authentication. In OpenSSH FIDO devices are supported by new public key types "ecdsa-sk" and "ed25519-sk", along with corresponding certificate types. ssh-keygen(1) may be used to generate a FIDO token-backed key, after which they may be used much like any other key type supported by OpenSSH, so long as the hardware token is attached when the keys are used. FIDO tokens also generally require the user explicitly authorise operations by touching or tapping them. Generating a FIDO key requires the token be attached, and will usually require the user tap the token to confirm the operation: $ ssh-keygen -t ecdsa-sk -f ~/.ssh/id_ecdsa_sk Generating public/private ecdsa-sk key pair. You may need to touch your security key to authorize key generation. Enter file in which to save the key (/home/djm/.ssh/id_ecdsa_sk): Enter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in /home/djm/.ssh/id_ecdsa_sk Your public key has been saved in /home/djm/.ssh/id_ecdsa_sk.pub This will yield a public and private key-pair. The private key file should be useless to an attacker who does not have access to the physical token. After generation, this key may be used like any other supported key in OpenSSH and may be listed in authorized_keys, added to ssh-agent(1), etc. The only additional stipulation is that the FIDO token that the key belongs to must be attached when the key is used. To enable FIDO/U2F support, this change regenerates ssh_namespace.h, adds ssh-sk-helper, and sets ENABLE_SK_INTERNAL (unless building WITHOUT_USB). devd integration is not included in this change, and is under investigation for the base system. In the interim the security/u2f-devd port can be installed to provide appropriate devd rules. Reviewed by: delphij, kevans Relnotes: Yes Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D32509 2021-10-07 05:31:17 +02:00
			`.if ${MK_USB} != "no"`
ssh: use standalone config file for security key support An upcoming OpenSSH update has multiple config.h settings that change depending on whether builtin security key support is enabled. Prepare for this by moving ENABLE_SK_INTERNAL to a new sk_config.h header (similar to the approach used for optional krb5 support) and optionally including that, instead of defining the macro directly from CFLAGS. Reviewed by: kevans MFC after: 2 weeks Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D34407 2022-03-01 22:42:13 +01:00			`# Built-in security key support`
			`CFLAGS+= -include sk_config.h`
ssh: enable FIDO/U2F keys Description of FIDO/U2F support (from OpenSSH 8.2 release notes, https://www.openssh.com/txt/release-8.2): This release adds support for FIDO/U2F hardware authenticators to OpenSSH. U2F/FIDO are open standards for inexpensive two-factor authentication hardware that are widely used for website authentication. In OpenSSH FIDO devices are supported by new public key types "ecdsa-sk" and "ed25519-sk", along with corresponding certificate types. ssh-keygen(1) may be used to generate a FIDO token-backed key, after which they may be used much like any other key type supported by OpenSSH, so long as the hardware token is attached when the keys are used. FIDO tokens also generally require the user explicitly authorise operations by touching or tapping them. Generating a FIDO key requires the token be attached, and will usually require the user tap the token to confirm the operation: $ ssh-keygen -t ecdsa-sk -f ~/.ssh/id_ecdsa_sk Generating public/private ecdsa-sk key pair. You may need to touch your security key to authorize key generation. Enter file in which to save the key (/home/djm/.ssh/id_ecdsa_sk): Enter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in /home/djm/.ssh/id_ecdsa_sk Your public key has been saved in /home/djm/.ssh/id_ecdsa_sk.pub This will yield a public and private key-pair. The private key file should be useless to an attacker who does not have access to the physical token. After generation, this key may be used like any other supported key in OpenSSH and may be listed in authorized_keys, added to ssh-agent(1), etc. The only additional stipulation is that the FIDO token that the key belongs to must be attached when the key is used. To enable FIDO/U2F support, this change regenerates ssh_namespace.h, adds ssh-sk-helper, and sets ENABLE_SK_INTERNAL (unless building WITHOUT_USB). devd integration is not included in this change, and is under investigation for the base system. In the interim the security/u2f-devd port can be installed to provide appropriate devd rules. Reviewed by: delphij, kevans Relnotes: Yes Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D32509 2021-10-07 05:31:17 +02:00			`.endif`