HardenedBSD/sys/net80211/ieee80211_crypto.h

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

255 lines
10 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2001 Atsushi Onoe
* Copyright (c) 2002-2008 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _NET80211_IEEE80211_CRYPTO_H_
#define _NET80211_IEEE80211_CRYPTO_H_
/*
* 802.11 protocol crypto-related definitions.
*/
#define IEEE80211_KEYBUF_SIZE 16
#define IEEE80211_MICBUF_SIZE (8+8) /* space for both tx+rx keys */
/*
* Old WEP-style key. Deprecated.
*/
struct ieee80211_wepkey {
u_int wk_len; /* key length in bytes */
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 05:36:55 +02:00
uint8_t wk_key[IEEE80211_KEYBUF_SIZE];
};
struct ieee80211_rsnparms {
uint8_t rsn_mcastcipher; /* mcast/group cipher */
uint8_t rsn_mcastkeylen; /* mcast key length */
uint8_t rsn_ucastcipher; /* selected unicast cipher */
uint8_t rsn_ucastkeylen; /* unicast key length */
uint8_t rsn_keymgmt; /* selected key mgmt algo */
uint16_t rsn_caps; /* capabilities */
};
struct ieee80211_cipher;
/*
* Crypto key state. There is sufficient room for all supported
* ciphers (see below). The underlying ciphers are handled
* separately through loadable cipher modules that register with
* the generic crypto support. A key has a reference to an instance
* of the cipher; any per-key state is hung off wk_private by the
* cipher when it is attached. Ciphers are automatically called
* to detach and cleanup any such state when the key is deleted.
*
* The generic crypto support handles encap/decap of cipher-related
* frame contents for both hardware- and software-based implementations.
* A key requiring software crypto support is automatically flagged and
* the cipher is expected to honor this and do the necessary work.
* Ciphers such as TKIP may also support mixed hardware/software
* encrypt/decrypt and MIC processing.
*/
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 05:36:55 +02:00
typedef uint16_t ieee80211_keyix; /* h/w key index */
Split crypto tx+rx key indices and add a key index -> node mapping table: Crypto changes: o change driver/net80211 key_alloc api to return tx+rx key indices; a driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set it to be the same as the tx key index (the former disables use of the key index in building the keyix->node mapping table and is the default setup for naive drivers by null_key_alloc) o add cs_max_keyid to crypto state to specify the max h/w key index a driver will return; this is used to allocate the key index mapping table and to bounds check table loookups o while here introduce ieee80211_keyix (finally) for the type of a h/w key index o change crypto notifiers for rx failures to pass the rx key index up as appropriate (michael failure, replay, etc.) Node table changes: o optionally allocate a h/w key index to node mapping table for the station table using the max key index setting supplied by drivers (note the scan table does not get a map) o defer node table allocation to lateattach so the driver has a chance to set the max key id to size the key index map o while here also defer the aid bitmap allocation o add new ieee80211_find_rxnode_withkey api to find a sta/node entry on frame receive with an optional h/w key index to use in checking mapping table; also updates the map if it does a hash lookup and the found node has a rx key index set in the unicast key; note this work is separated from the old ieee80211_find_rxnode call so drivers do not need to be aware of the new mechanism o move some node table manipulation under the node table lock to close a race on node delete o add ieee80211_node_delucastkey to do the dirty work of deleting unicast key state for a node (deletes any key and handles key map references) Ath driver: o nuke private sc_keyixmap mechansim in favor of net80211 support o update key alloc api These changes close several race conditions for the ath driver operating in ap mode. Other drivers should see no change. Station mode operation for ath no longer uses the key index map but performance tests show no noticeable change and this will be fixed when the scan table is eliminated with the new scanning support. Tested by: Michal Mertl, avatar, others Reviewed by: avatar, others MFC after: 2 weeks
2005-08-08 20:46:36 +02:00
struct ieee80211_key {
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 05:36:55 +02:00
uint8_t wk_keylen; /* key length in bytes */
uint8_t wk_pad; /* .. some drivers use this. Fix that. */
uint8_t wk_pad1[2];
uint32_t wk_flags;
#define IEEE80211_KEY_XMIT 0x00000001 /* key used for xmit */
#define IEEE80211_KEY_RECV 0x00000002 /* key used for recv */
#define IEEE80211_KEY_GROUP 0x00000004 /* key used for WPA group operation */
#define IEEE80211_KEY_NOREPLAY 0x00000008 /* ignore replay failures */
#define IEEE80211_KEY_SWENCRYPT 0x00000010 /* host-based encrypt */
#define IEEE80211_KEY_SWDECRYPT 0x00000020 /* host-based decrypt */
#define IEEE80211_KEY_SWENMIC 0x00000040 /* host-based enmic */
#define IEEE80211_KEY_SWDEMIC 0x00000080 /* host-based demic */
#define IEEE80211_KEY_DEVKEY 0x00000100 /* device key request completed */
#define IEEE80211_KEY_CIPHER0 0x00001000 /* cipher-specific action 0 */
#define IEEE80211_KEY_CIPHER1 0x00002000 /* cipher-specific action 1 */
#define IEEE80211_KEY_NOIV 0x00004000 /* don't insert IV/MIC for !mgmt */
#define IEEE80211_KEY_NOIVMGT 0x00008000 /* don't insert IV/MIC for mgmt */
#define IEEE80211_KEY_NOMIC 0x00010000 /* don't insert MIC for !mgmt */
#define IEEE80211_KEY_NOMICMGT 0x00020000 /* don't insert MIC for mgmt */
Split crypto tx+rx key indices and add a key index -> node mapping table: Crypto changes: o change driver/net80211 key_alloc api to return tx+rx key indices; a driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set it to be the same as the tx key index (the former disables use of the key index in building the keyix->node mapping table and is the default setup for naive drivers by null_key_alloc) o add cs_max_keyid to crypto state to specify the max h/w key index a driver will return; this is used to allocate the key index mapping table and to bounds check table loookups o while here introduce ieee80211_keyix (finally) for the type of a h/w key index o change crypto notifiers for rx failures to pass the rx key index up as appropriate (michael failure, replay, etc.) Node table changes: o optionally allocate a h/w key index to node mapping table for the station table using the max key index setting supplied by drivers (note the scan table does not get a map) o defer node table allocation to lateattach so the driver has a chance to set the max key id to size the key index map o while here also defer the aid bitmap allocation o add new ieee80211_find_rxnode_withkey api to find a sta/node entry on frame receive with an optional h/w key index to use in checking mapping table; also updates the map if it does a hash lookup and the found node has a rx key index set in the unicast key; note this work is separated from the old ieee80211_find_rxnode call so drivers do not need to be aware of the new mechanism o move some node table manipulation under the node table lock to close a race on node delete o add ieee80211_node_delucastkey to do the dirty work of deleting unicast key state for a node (deletes any key and handles key map references) Ath driver: o nuke private sc_keyixmap mechansim in favor of net80211 support o update key alloc api These changes close several race conditions for the ath driver operating in ap mode. Other drivers should see no change. Station mode operation for ath no longer uses the key index map but performance tests show no noticeable change and this will be fixed when the scan table is eliminated with the new scanning support. Tested by: Michal Mertl, avatar, others Reviewed by: avatar, others MFC after: 2 weeks
2005-08-08 20:46:36 +02:00
ieee80211_keyix wk_keyix; /* h/w key index */
ieee80211_keyix wk_rxkeyix; /* optional h/w rx key index */
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 05:36:55 +02:00
uint8_t wk_key[IEEE80211_KEYBUF_SIZE+IEEE80211_MICBUF_SIZE];
#define wk_txmic wk_key+IEEE80211_KEYBUF_SIZE+0 /* XXX can't () right */
#define wk_rxmic wk_key+IEEE80211_KEYBUF_SIZE+8 /* XXX can't () right */
/* key receive sequence counter */
uint64_t wk_keyrsc[IEEE80211_TID_SIZE];
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 05:36:55 +02:00
uint64_t wk_keytsc; /* key transmit sequence counter */
const struct ieee80211_cipher *wk_cipher;
void *wk_private; /* private cipher state */
uint8_t wk_macaddr[IEEE80211_ADDR_LEN];
};
#define IEEE80211_KEY_COMMON /* common flags passed in by apps */\
(IEEE80211_KEY_XMIT | IEEE80211_KEY_RECV | IEEE80211_KEY_GROUP | \
IEEE80211_KEY_NOREPLAY)
#define IEEE80211_KEY_SWCRYPT \
(IEEE80211_KEY_SWENCRYPT | IEEE80211_KEY_SWDECRYPT)
#define IEEE80211_KEY_SWMIC (IEEE80211_KEY_SWENMIC | IEEE80211_KEY_SWDEMIC)
#define IEEE80211_KEY_DEVICE /* flags owned by device driver */\
(IEEE80211_KEY_DEVKEY|IEEE80211_KEY_CIPHER0|IEEE80211_KEY_CIPHER1| \
IEEE80211_KEY_SWCRYPT|IEEE80211_KEY_SWMIC|IEEE80211_KEY_NOIV | \
IEEE80211_KEY_NOIVMGT|IEEE80211_KEY_NOMIC|IEEE80211_KEY_NOMICMGT)
#define IEEE80211_KEY_BITS \
"\20\1XMIT\2RECV\3GROUP\4SWENCRYPT\5SWDECRYPT\6SWENMIC\7SWDEMIC" \
"\10DEVKEY\11CIPHER0\12CIPHER1"
#define IEEE80211_KEYIX_NONE ((ieee80211_keyix) -1)
/*
* NB: these values are ordered carefully; there are lots of
* of implications in any reordering. Beware that 4 is used
* only to indicate h/w TKIP MIC support in driver capabilities;
* there is no separate cipher support (it's rolled into the
* TKIP cipher support).
*/
#define IEEE80211_CIPHER_WEP 0
#define IEEE80211_CIPHER_TKIP 1
#define IEEE80211_CIPHER_AES_OCB 2
#define IEEE80211_CIPHER_AES_CCM 3
#define IEEE80211_CIPHER_TKIPMIC 4 /* TKIP MIC capability */
#define IEEE80211_CIPHER_CKIP 5
#define IEEE80211_CIPHER_NONE 6 /* pseudo value */
#define IEEE80211_CIPHER_MAX (IEEE80211_CIPHER_NONE+1)
/* capability bits in ic_cryptocaps/iv_cryptocaps */
#define IEEE80211_CRYPTO_WEP (1<<IEEE80211_CIPHER_WEP)
#define IEEE80211_CRYPTO_TKIP (1<<IEEE80211_CIPHER_TKIP)
#define IEEE80211_CRYPTO_AES_OCB (1<<IEEE80211_CIPHER_AES_OCB)
#define IEEE80211_CRYPTO_AES_CCM (1<<IEEE80211_CIPHER_AES_CCM)
#define IEEE80211_CRYPTO_TKIPMIC (1<<IEEE80211_CIPHER_TKIPMIC)
#define IEEE80211_CRYPTO_CKIP (1<<IEEE80211_CIPHER_CKIP)
#define IEEE80211_CRYPTO_BITS \
"\20\1WEP\2TKIP\3AES\4AES_CCM\5TKIPMIC\6CKIP"
#if defined(__KERNEL__) || defined(_KERNEL)
struct ieee80211com;
struct ieee80211vap;
struct ieee80211_node;
struct mbuf;
MALLOC_DECLARE(M_80211_CRYPTO);
2005-04-04 06:27:20 +02:00
void ieee80211_crypto_attach(struct ieee80211com *);
void ieee80211_crypto_detach(struct ieee80211com *);
void ieee80211_crypto_vattach(struct ieee80211vap *);
void ieee80211_crypto_vdetach(struct ieee80211vap *);
int ieee80211_crypto_newkey(struct ieee80211vap *,
int cipher, int flags, struct ieee80211_key *);
int ieee80211_crypto_delkey(struct ieee80211vap *,
struct ieee80211_key *);
int ieee80211_crypto_setkey(struct ieee80211vap *, struct ieee80211_key *);
void ieee80211_crypto_delglobalkeys(struct ieee80211vap *);
void ieee80211_crypto_reload_keys(struct ieee80211com *);
void ieee80211_crypto_set_deftxkey(struct ieee80211vap *,
ieee80211_keyix kid);
/*
* Template for a supported cipher. Ciphers register with the
* crypto code and are typically loaded as separate modules
* (the null cipher is always present).
* XXX may need refcnts
*/
struct ieee80211_cipher {
const char *ic_name; /* printable name */
u_int ic_cipher; /* IEEE80211_CIPHER_* */
u_int ic_header; /* size of privacy header (bytes) */
u_int ic_trailer; /* size of privacy trailer (bytes) */
u_int ic_miclen; /* size of mic trailer (bytes) */
void* (*ic_attach)(struct ieee80211vap *, struct ieee80211_key *);
void (*ic_detach)(struct ieee80211_key *);
int (*ic_setkey)(struct ieee80211_key *);
void (*ic_setiv)(struct ieee80211_key *, uint8_t *);
int (*ic_encap)(struct ieee80211_key *, struct mbuf *);
int (*ic_decap)(struct ieee80211_key *, struct mbuf *, int);
int (*ic_enmic)(struct ieee80211_key *, struct mbuf *, int);
int (*ic_demic)(struct ieee80211_key *, struct mbuf *, int);
};
extern const struct ieee80211_cipher ieee80211_cipher_none;
#define IEEE80211_KEY_UNDEFINED(k) \
((k)->wk_cipher == &ieee80211_cipher_none)
2005-04-04 06:27:20 +02:00
void ieee80211_crypto_register(const struct ieee80211_cipher *);
void ieee80211_crypto_unregister(const struct ieee80211_cipher *);
int ieee80211_crypto_available(u_int cipher);
int ieee80211_crypto_get_key_wepidx(const struct ieee80211vap *,
const struct ieee80211_key *k);
uint8_t ieee80211_crypto_get_keyid(struct ieee80211vap *vap,
struct ieee80211_key *k);
struct ieee80211_key *ieee80211_crypto_get_txkey(struct ieee80211_node *,
struct mbuf *);
struct ieee80211_key *ieee80211_crypto_encap(struct ieee80211_node *,
struct mbuf *);
int ieee80211_crypto_decap(struct ieee80211_node *,
struct mbuf *, int, struct ieee80211_key **);
int ieee80211_crypto_demic(struct ieee80211vap *vap, struct ieee80211_key *k,
struct mbuf *, int);
/*
* Add any MIC.
*/
static __inline int
ieee80211_crypto_enmic(struct ieee80211vap *vap,
struct ieee80211_key *k, struct mbuf *m, int force)
{
const struct ieee80211_cipher *cip = k->wk_cipher;
return (cip->ic_miclen > 0 ? cip->ic_enmic(k, m, force) : 1);
}
/*
* Reset key state to an unused state. The crypto
* key allocation mechanism insures other state (e.g.
* key data) is properly setup before a key is used.
*/
static __inline void
ieee80211_crypto_resetkey(struct ieee80211vap *vap,
Split crypto tx+rx key indices and add a key index -> node mapping table: Crypto changes: o change driver/net80211 key_alloc api to return tx+rx key indices; a driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set it to be the same as the tx key index (the former disables use of the key index in building the keyix->node mapping table and is the default setup for naive drivers by null_key_alloc) o add cs_max_keyid to crypto state to specify the max h/w key index a driver will return; this is used to allocate the key index mapping table and to bounds check table loookups o while here introduce ieee80211_keyix (finally) for the type of a h/w key index o change crypto notifiers for rx failures to pass the rx key index up as appropriate (michael failure, replay, etc.) Node table changes: o optionally allocate a h/w key index to node mapping table for the station table using the max key index setting supplied by drivers (note the scan table does not get a map) o defer node table allocation to lateattach so the driver has a chance to set the max key id to size the key index map o while here also defer the aid bitmap allocation o add new ieee80211_find_rxnode_withkey api to find a sta/node entry on frame receive with an optional h/w key index to use in checking mapping table; also updates the map if it does a hash lookup and the found node has a rx key index set in the unicast key; note this work is separated from the old ieee80211_find_rxnode call so drivers do not need to be aware of the new mechanism o move some node table manipulation under the node table lock to close a race on node delete o add ieee80211_node_delucastkey to do the dirty work of deleting unicast key state for a node (deletes any key and handles key map references) Ath driver: o nuke private sc_keyixmap mechansim in favor of net80211 support o update key alloc api These changes close several race conditions for the ath driver operating in ap mode. Other drivers should see no change. Station mode operation for ath no longer uses the key index map but performance tests show no noticeable change and this will be fixed when the scan table is eliminated with the new scanning support. Tested by: Michal Mertl, avatar, others Reviewed by: avatar, others MFC after: 2 weeks
2005-08-08 20:46:36 +02:00
struct ieee80211_key *k, ieee80211_keyix ix)
{
2008-12-15 23:31:54 +01:00
k->wk_cipher = &ieee80211_cipher_none;
k->wk_private = k->wk_cipher->ic_attach(vap, k);
Split crypto tx+rx key indices and add a key index -> node mapping table: Crypto changes: o change driver/net80211 key_alloc api to return tx+rx key indices; a driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set it to be the same as the tx key index (the former disables use of the key index in building the keyix->node mapping table and is the default setup for naive drivers by null_key_alloc) o add cs_max_keyid to crypto state to specify the max h/w key index a driver will return; this is used to allocate the key index mapping table and to bounds check table loookups o while here introduce ieee80211_keyix (finally) for the type of a h/w key index o change crypto notifiers for rx failures to pass the rx key index up as appropriate (michael failure, replay, etc.) Node table changes: o optionally allocate a h/w key index to node mapping table for the station table using the max key index setting supplied by drivers (note the scan table does not get a map) o defer node table allocation to lateattach so the driver has a chance to set the max key id to size the key index map o while here also defer the aid bitmap allocation o add new ieee80211_find_rxnode_withkey api to find a sta/node entry on frame receive with an optional h/w key index to use in checking mapping table; also updates the map if it does a hash lookup and the found node has a rx key index set in the unicast key; note this work is separated from the old ieee80211_find_rxnode call so drivers do not need to be aware of the new mechanism o move some node table manipulation under the node table lock to close a race on node delete o add ieee80211_node_delucastkey to do the dirty work of deleting unicast key state for a node (deletes any key and handles key map references) Ath driver: o nuke private sc_keyixmap mechansim in favor of net80211 support o update key alloc api These changes close several race conditions for the ath driver operating in ap mode. Other drivers should see no change. Station mode operation for ath no longer uses the key index map but performance tests show no noticeable change and this will be fixed when the scan table is eliminated with the new scanning support. Tested by: Michal Mertl, avatar, others Reviewed by: avatar, others MFC after: 2 weeks
2005-08-08 20:46:36 +02:00
k->wk_keyix = k->wk_rxkeyix = ix;
k->wk_flags = IEEE80211_KEY_XMIT | IEEE80211_KEY_RECV;
}
/*
* Crypt-related notification methods.
*/
void ieee80211_notify_replay_failure(struct ieee80211vap *,
const struct ieee80211_frame *, const struct ieee80211_key *,
uint64_t rsc, int tid);
void ieee80211_notify_michael_failure(struct ieee80211vap *,
const struct ieee80211_frame *, u_int keyix);
#endif /* defined(__KERNEL__) || defined(_KERNEL) */
#endif /* _NET80211_IEEE80211_CRYPTO_H_ */