mirror of
https://git.hardenedbsd.org/hardenedbsd/HardenedBSD.git
synced 2025-01-01 00:18:15 +01:00
Added a fourth DOS-format floppy to the install disks containing os-bs
and miscellaneous programs which get installed into /usr/distbin. Install now recognizes existing DOS partitions and attempts to install after them. Theoretically, it also remaps badblocks. N.B.: The fourth install floppy must have a clean DOS FAT. Building the new distribution floppies is untested TODO: Build a disktab entry for existing DOS partitions (except extended partitions). This would allow loading and/or extracting the distribution files directly from the DOS hard disk partition.
This commit is contained in:
Andrew Moore
parent
d23866636a
commit
93f0f2e040
25
etc/Makefile
25
etc/Makefile
@ -44,16 +44,16 @@ KC_FILES+= sbin/fsck sbin/halt sbin/init sbin/mount sbin/umount
|
||||
FILESYSTEM_DIRS= bin dev etc mnt sbin usr usr/bin usr/mdec usr/sbin
|
||||
FILESYSTEM_TREES= dev
|
||||
FILESYSTEM_FILES= ${COPYRIGHT}
|
||||
FILESYSTEM_FILES+= bin/[ bin/cat bin/expr bin/ls bin/mkdir
|
||||
FILESYSTEM_FILES+= bin/df
|
||||
FILESYSTEM_FILES+= bin/[ bin/expr bin/ls bin/mkdir
|
||||
FILESYSTEM_FILES+= bin/sh bin/sync bin/test
|
||||
FILESYSTEM_FILES+= dev/MAKEDEV dev/MAKEDEV.local
|
||||
FILESYSTEM_FILES+= dev/MAKEDEV
|
||||
FILESYSTEM_FILES+= etc/group
|
||||
FILESYSTEM_FILES+= etc/master.passwd etc/passwd etc/pwd.db etc/spwd.db
|
||||
FILESYSTEM_FILES+= sbin/disklabel sbin/halt sbin/init
|
||||
FILESYSTEM_FILES+= sbin/mount sbin/mount_isofs sbin/mount_pcfs
|
||||
FILESYSTEM_FILES+= sbin/newfs
|
||||
FILESYSTEM_FILES+= sbin/umount
|
||||
FILESYSTEM_FILES+= sbin/fdisk
|
||||
FILESYSTEM_FILES+= usr/bin/cpio
|
||||
FILESYSTEM_FILES+= ${MDEC}
|
||||
FILESYSTEM_FILES+= usr/sbin/bad144
|
||||
@ -71,6 +71,10 @@ CPIO_CPIO+= usr/bin/elvis usr/bin/ex usr/bin/vi usr/bin/view
|
||||
CPIO_CPIO+= usr/sbin/update usr/sbin/chown
|
||||
CPIO_CPIO+= var
|
||||
|
||||
DOS_FILES= bin/cat bin/dd bin/df bin/ed
|
||||
DOS_FILES+= usr/bin/cksum usr/bin/mt
|
||||
DOS_FILES+= sbin/mknod sbin/ping sbin/shutdown sbin/st sbin/reboot
|
||||
|
||||
CRYPT_LIB= lib/libcrypt
|
||||
CRYPT_SRCS= bin/ed bin/rcp
|
||||
CRYPT_SRCS+= libexec/ftpd libexec/makekey libexec/rexecd libexec/rlogind
|
||||
@ -235,7 +239,8 @@ filesystem-floppy:
|
||||
(cd ${MOUNT}/dev; \
|
||||
sh ${DESTDIR}/dev/MAKEDEV std; \
|
||||
rm -rf fd; \
|
||||
sh ${DESTDIR}/dev/MAKEDEV fd0 wd0 sd0 sd1)
|
||||
sh ${DESTDIR}/dev/MAKEDEV fd0 fd1 wd0 sd0 sd1
|
||||
rm -f ${DESTDIR}/dev/rfd1[b-z] ${DESTDIR}/dev/fd1[b-z])
|
||||
(cd ${DESTDIR}/; \
|
||||
ls ${FILESYSTEM_FILES} | cpio -pdamuv ${MOUNT})
|
||||
install -c -o root -g wheel -m 755 etc.i386/inst1.profile \
|
||||
@ -278,6 +283,18 @@ cpio-floppy:
|
||||
gzip --no-name -9 -c ${RELEASEDIR}/floppies/cpio-floppy \
|
||||
>${RELEASEDIR}/floppies/cpio-floppy.gz
|
||||
|
||||
dos-floppy:
|
||||
mount -t pcfs /dev/${FLOPPY}a ${MOUNT}
|
||||
(cd ${DESTDIR}/; \
|
||||
cp /sys/i386/floppy/* ${MOUNT}; \
|
||||
cp ${DOS_FILES} ${MOUNT})
|
||||
df -ik ${MOUNT}
|
||||
umount /dev/${FLOPPY}a
|
||||
dd if=/dev/r${FLOPPY}a of=${RELEASEDIR}/floppies/dos-floppy \
|
||||
bs=15b count=160
|
||||
gzip --no-name -9 -c ${RELEASEDIR}/floppies/dos-floppy \
|
||||
>${RELEASEDIR}/floppies/dos-floppy.gz
|
||||
|
||||
bin-tarball:
|
||||
(cd ${DESTDIR}; \
|
||||
tar cf - . | gzip --no-name -9 -c | \
|
||||
|
||||
@ -32,9 +32,14 @@ to make initial installation of the system as easy as possible.
|
||||
Next, make a second floppy from the disk image: filesystem-floppy
|
||||
You'll need this for the second stage of the boot process.
|
||||
|
||||
Finally, make a third floppy from the disk image: cpio-floppy
|
||||
Next, make a third floppy from the disk image: cpio-floppy
|
||||
You'll need this for the last stage of the boot process.
|
||||
|
||||
Finally, make a fourth floppy from the disk image: dos-floppy
|
||||
You'll need this for the last stage of the boot process.
|
||||
This disk is MS-DOS readable and contains the os-bs boot manager
|
||||
(for if you are installing more than one operating system on disk.)
|
||||
|
||||
2. Boot the first floppy. When it asks you to insert the file system,
|
||||
insert your second ``filesystem-floppy.'' Follow the instructions
|
||||
that floppy gives you, making note of the type of disk it says to
|
||||
@ -56,7 +61,12 @@ to make initial installation of the system as easy as possible.
|
||||
Note that 0 is the same as DOS drive A:, and 1 is the same as DOS
|
||||
drive B:
|
||||
|
||||
5. After the cpio-floppy has been copied to the disk, enter ``halt''.
|
||||
5. After the cpio-floppy has been copied to the disk, remove it from the
|
||||
drive and insert the fourth floppy (dos-floppy). Again, specify the
|
||||
drive to read from.
|
||||
|
||||
5. After the dos-floppy has been copied to the disk, enter `halt' at
|
||||
the command prompt.
|
||||
|
||||
6. When the system asks you to press the return key to reboot, first
|
||||
remove the floppy and then press the return key to boot from the hard
|
||||
@ -103,4 +113,4 @@ to make initial installation of the system as easy as possible.
|
||||
please have a look around! You may also find this a good time to
|
||||
read the release notes in /usr/src/RELNOTES.FreeBSD.
|
||||
|
||||
End of $Id: floppy.install_notes,v 1.2 1993/09/02 00:04:15 jkh Exp $
|
||||
End of $Id: floppy.install_notes,v 1.3 1993/09/02 02:04:33 rgrimes Exp $
|
||||
|
||||
@ -115,28 +115,33 @@ force_offset=
|
||||
if [ $cyls_per_disk -gt 1024 ]; then
|
||||
echo
|
||||
echo "WARNING: >1024 cylinders."
|
||||
echo "Overwriting existing partitions - okay? [y] "
|
||||
echo -n "Overwriting existing partitions - okay? [y] "
|
||||
read resp junk
|
||||
[ ! "$resp" ] && resp=y
|
||||
case "$resp" in
|
||||
y*|Y*)
|
||||
RUN_FDISK=""
|
||||
force_offset=1
|
||||
opsys_off=0
|
||||
cyls_per_opsys=${cyls_per_disk}
|
||||
opsys_part=${unused_last_part:-3}
|
||||
return 0
|
||||
;;
|
||||
*)
|
||||
echo
|
||||
echo "If the number of disk cylinders does exceed 1024, then ${OPSYSTEM}"
|
||||
echo "If the number of disk cylinders does not exceed 1024, then ${OPSYSTEM}"
|
||||
echo "can be installed alongside other operating systems on a single disk."
|
||||
echo "Otherwise, ${OPSYSTEM} MUST be installed at the beginning of the disk,"
|
||||
echo "and existing partitions will be lost."
|
||||
echo "Otherwise, it is system-dependent whether this will work or not."
|
||||
echo "In the worst case, ${OPSYSTEM} MUST be installed at the beginning of"
|
||||
echo "the disk, and existing partitions will be lost."
|
||||
echo
|
||||
echo "For now, we will assume that >1024 cylinders creates no problems..."
|
||||
# FALL THROUGH
|
||||
;;
|
||||
esac
|
||||
RUN_FDISK=""
|
||||
opsys_off=0
|
||||
cyls_per_opsys=${cyls_per_disk}
|
||||
opsys_part=${unused_last_part:-3}
|
||||
return 0
|
||||
fi
|
||||
# Case II: no partitions used
|
||||
elif [ $sysid_cnt -eq 0 ]; then
|
||||
if [ $sysid_cnt -eq 0 ]; then
|
||||
echo
|
||||
echo "WARNING: partition table is either missing or corrupt."
|
||||
echo "Existing partitions will be lost."
|
||||
@ -845,6 +850,26 @@ echo "driveno=\${resp:-0}"
|
||||
echo "mount -o ro /dev/fd\${driveno}a /mnt"
|
||||
echo "cd /mnt"
|
||||
echo "install"
|
||||
echo "cd /"
|
||||
echo "umount /mnt >/dev/null 2>&1"
|
||||
echo "echo"
|
||||
echo "echo \"Now insert third installation floppy in drive and\""
|
||||
echo "echo -n \"enter that drive's number (e.g. 0 or 1): [0] \""
|
||||
echo "read resp junk"
|
||||
echo "driveno=\${resp:-0}"
|
||||
echo "mount -t pcfs -o ro /dev/fd\${driveno}a /mnt"
|
||||
echo "mkdir -p /usr/distbin"
|
||||
echo "cp /mnt/* /usr/distbin/"
|
||||
echo "umount /mnt >/dev/null 2>&1"
|
||||
echo "echo"
|
||||
echo "echo \"OK. All of the base files are installed.\""
|
||||
echo "echo"
|
||||
echo "echo \"The next step: reboot from the hard disk, and follow\""
|
||||
echo "echo \"more instrutctions.\""
|
||||
echo "echo"
|
||||
echo "echo \"To do this, enter 'halt' at the prompt to halt the machine.\""
|
||||
echo "echo \"Once the machine has halted, remove the floppy from the disk\""
|
||||
echo "echo \"drive, and hit any key to reboot from the hard disk.\""
|
||||
) >.profile
|
||||
|
||||
sync
|
||||
@ -856,8 +881,8 @@ echo
|
||||
echo "To do this, enter 'halt' now to halt the machine. After it"
|
||||
echo "announces that it has halted, remove the floppy from the drive"
|
||||
echo "and insert the kernel-copy disk that was booted before."
|
||||
echo "Press any key to reboot. Then when prompted to insert the file"
|
||||
echo "system floppy this time, just hit RETURN without changing floppies."
|
||||
echo "Press any key to reboot. When prompted to insert the filesystem"
|
||||
echo "floppy this time, just hit RETURN without changing floppies."
|
||||
echo
|
||||
echo "If all goes well, you can enter the command \`copy' at the prompt to"
|
||||
echo "copy the kernel to the hard disk. When asked for which partition to"
|
||||
|
||||
@ -28,18 +28,10 @@ cd /mnt
|
||||
ls .profile install usr/bin/* | cpio -pdmu${cpioverbose} /
|
||||
cd /dev
|
||||
echo " done."
|
||||
echo
|
||||
echo "Building /dev files..."
|
||||
sh MAKEDEV all
|
||||
cd /
|
||||
echo " done."
|
||||
|
||||
sync
|
||||
|
||||
echo "OK. All of the base files are installed."
|
||||
echo ""
|
||||
echo "The next step: reboot from the hard disk, and follow"
|
||||
echo "more instrutctions."
|
||||
echo ""
|
||||
echo "To do this, enter 'halt' at the prompt to halt the machine."
|
||||
echo "Once the machine has halted, remove the floppy from the disk"
|
||||
echo "drive, and hit any key to reboot from the hard disk."
|
||||
|
||||
Loading…
Reference in New Issue
Block a user