Remove references to MAKEDEV(8)

svn path=/head/; revision=215334

share/doc/papers/jail/mgt.ms

@@ -56,8 +56,6 @@ FreeBSD build environment.
 .PP
 One notable difference from the default FreeBSD install is that only
 a limited set of device nodes should be created.
-MAKEDEV(8) has been modified to accept a ``jail'' argument that creates
-the correct set of nodes. 
 .PP
 To improve storage efficiency, a fair number of the binaries in the system tree
 may be deleted, as they are not relevant in a jail environment.

share/doc/smm/01.setup/2.t

@@ -482,13 +482,7 @@ lw(2i) l.
 \fB#\fP \fImount_mfs -s 1000 -T type /dev/null /tmp\fP	(create a writable filesystem)
 (\fItype\fP is the disk type as determined from /etc/disktab)
 \fB#\fP \fIcd /tmp\fP	(connect to that directory)
-\fB#\fP \fI../dev/MAKEDEV \*(Dk#\fP	(create special files for root disk)
-(\fI\*(Dk\fP is the disk type, \fI#\fP is the unit number)
-(ignore warning from ``sh'')
 \fB#\fP \fImount \-uw /tmp/\*(Dk#a /\fP	(read-write mount root filesystem)
-\fB#\fP \fIcd /dev\fP	(go to device directory)
-\fB#\fP \fI./MAKEDEV \*(Dk#\fP	(create permanent special files for root disk)
-(again, ignore warning from ``sh'')
 .TE
 .DE
 .Sh 4 "Step 4: (optional) restoring the root filesystem"
@@ -513,8 +507,6 @@ To really create the root filesystem on drive 1
 you should first label the disk as described in step 5 below.
 Then run the following commands:
 .DS
-\fB#\fP \fIcd /dev\fP
-\fB#\fP \fI./MAKEDEV \*(Dk1a\fP
 \fB#\fP\|\fInewfs /dev/r\*(Dk1a\fP
 \fB#\fP\|\fImount /dev/\*(Dk1a /mnt\fP
 \fB#\fP\|\fIcd /mnt\fP
@@ -1393,8 +1385,6 @@ To make the
 .Pn /var
 filesystem we would do:
 .DS
-\fB#\fP \fIcd /dev\fP
-\fB#\fP \fIMAKEDEV \*(Dk1\fP
 \fB#\fP \fIdisklabel -wr \*(Dk1 "disk type" "disk name"\fP
 \fB#\fP \fInewfs \*(Dk1f\fP
 (information about filesystem prints out)

share/doc/smm/01.setup/4.t

@@ -30,6 +30,7 @@
 .\" SUCH DAMAGE.
 .\"
 .\"	@(#)4.t	8.1 (Berkeley) 7/29/93
+.\" $FreeBSD$
 .\"
 .ds LH "Installing/Operating \*(4B
 .ds CF \*(Dy
@@ -152,38 +153,11 @@ directory.
 For all the devices supported by the distribution system, the
 files in
 .Pn /dev
-are created by the
+are created by devfs.
-.Pn /dev/MAKEDEV
-shell script.
 .PP
 Determine the set of devices that you have and create a new
 .Pn /dev
-directory by running the MAKEDEV script.
+directory by mounting devfs.
-First create a new directory
-.Pn /newdev ,
-copy MAKEDEV into it, edit the file MAKEDEV.local
-to provide an entry for local needs,
-and run it to generate a
-.Pn /newdev directory.
-For instance,
-.DS
-\fB#\fP \fIcd /\fP
-\fB#\fP \fImkdir newdev\fP
-\fB#\fP \fIcp dev/MAKEDEV newdev/MAKEDEV\fP
-\fB#\fP \fIcd newdev\fP
-\fB#\fP \fIMAKEDEV \*(Dk0 pt0 std LOCAL\fP
-.DE
-Note the ``std'' argument causes standard devices such as
-.Pn /dev/console ,
-the machine console, to be created.
-.PP
-You can then do
-.DS
-\fB#\fP \fIcd /\fP
-\fB#\fP \fImv dev olddev ; mv newdev dev\fP
-\fB#\fP \fIsync\fP
-.DE
-to install the new device directory.
 .Sh 3 "Building new system images"
 .PP
 The kernel configuration of each UNIX system is described by
@@ -232,8 +206,8 @@ the file
 must be edited.
 .PP
 To add a new terminal device, be sure the device is configured into the system
-and that the special files for the device have been made by
+and that the special files for the device exist in
-.Pn /dev/MAKEDEV .
+.Pn /dev .
 Then, enable the appropriate lines of
 .Pn /etc/ttys
 by setting the ``status''
@@ -335,9 +309,6 @@ Finally note that you should change the names of any dialup
 terminals to ttyd?
 where ? is in [0-9a-zA-Z], as some programs use this property of the
 names to determine if a terminal is a dialup.
-Shell commands to do this should be put in the
-.Pn /dev/MAKEDEV.local
-script.
 .PP
 While it is possible to use truly arbitrary strings for terminal names,
 the accounting and noticeably the

share/doc/smm/01.setup/5.t

@@ -30,6 +30,7 @@
 .\" SUCH DAMAGE.
 .\"
 .\"	@(#)5.t	8.1 (Berkeley) 7/27/93
+.\" $FreeBSD$
 .\"
 .ds lq ``
 .ds rq ''
@@ -111,35 +112,6 @@ translations for machines that do not participate by use of the
 command.
 Additional information is provided in the manual page describing
 .Xr ESIS (4).
-.PP
-To use the pseudo terminals just configured, device
-entries must be created in the
-.Pn /dev
-directory.  To create 32
-pseudo terminals (plenty, unless you have a heavy network load)
-execute the following commands.
-.DS
-\fB#\fP \fIcd /dev\fP
-\fB#\fP \fIMAKEDEV pty0 pty1\fP
-.DE
-More pseudo terminals may be made by specifying
-.Pn pty2 ,
-.Pn pty3 ,
-etc.  The kernel normally includes support for 32 pseudo terminals
-unless the configuration file specifies a different number.
-Each pseudo terminal really consists of two files in
-.Pn /dev :
-a master and a slave.  The master pseudo terminal file is named
-.Pn /dev/ptyp? ,
-while the slave side is
-.Pn /dev/ttyp? .
-Pseudo terminals are also used by several programs not related to the network.
-In addition to creating the pseudo terminals,
-be sure to install them in the
-.Pn /etc/ttys
-file (with a `none' in the second column so no
-.Xr getty
-is started).
 .Sh 2 "Local subnets"
 .PP
 In \*(4B the Internet support

share/doc/smm/01.setup/spell.ok

@@ -1,3 +1,4 @@
+# $FreeBSD$
 A1096A
 AA
 ACU
@@ -91,7 +92,6 @@ LK201
 LOGFILE
 Leffler
 Luna
-MAKEDEV.local
 MB
 MC68040
 MFS

share/man/man8/MAKEDEV.8

@@ -1,46 +0,0 @@
-.\" Copyright (c) 2003, Giorgos Keramidas
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" $FreeBSD$
-.\"
-.Dd March 25, 2003
-.Dt MAKEDEV 8
-.Os
-.Sh NAME
-.Nm MAKEDEV
-.Nd old script for creating device nodes
-.Sh DESCRIPTION
-The
-.Nm
-script was deprecated by
-.Xr devfs 5
-and removed from
-.Fx
-after
-.Xr devfs 5
-became mandatory.
-.Sh SEE ALSO
-.Xr intro 4 ,
-.Xr devfs 5 ,
-.Xr intro 8

share/man/man8/Makefile

@@ -4,7 +4,6 @@
 MAN=	crash.8 \
 	diskless.8 \
 	intro.8 \
-	MAKEDEV.8 \
 	nanobsd.8 \
 	picobsd.8 \
 	rc.8 \

sys/dev/firewire/00README

@@ -44,10 +44,6 @@ IEEE 1394 support for FreeBSD-5.X and 4.X.
 	- make install
 	- make load
 
-	For FreeBSD-4 user:
-
-	- ./MAKEDEV
-
 3. SBP-II support (sbp)
 
 	- You need CAM(SCSI) support in your kernel.

sys/dev/tdfx/tdfx_pci.c

@@ -250,7 +250,7 @@ tdfx_attach(device_t dev) {
 	/* 
 	 * make_dev registers the cdev to access the 3dfx card from /dev
 	 *	use hex here for the dev num, simply to provide better support if > 10
-	 * voodoo cards, for the mad. The user must set the link, or use MAKEDEV.
+	 * voodoo cards, for the mad. The user must set the link.
 	 * Why would we want that many voodoo cards anyhow? 
 	 */
 	tdfx_info->devt = make_dev(&tdfx_cdev, device_get_unit(dev),

usr.sbin/config/SMM.doc/6.t

@@ -30,6 +30,7 @@
 .\" SUCH DAMAGE.
 .\"
 .\"	@(#)6.t	8.1 (Berkeley) 6/8/93
+.\" $FreeBSD$
 .\"
 .\".ds RH "Adding New Devices
 .ne 2i
@@ -230,10 +231,3 @@ Remember that the position in the
 device table specifies the major device number.
 The block major number is needed in the ``devices.machine'' file
 if the device is a disk.
-.PP
-With the configuration information in place, your configuration
-file appropriately modified, and a system reconfigured and rebooted
-you should incorporate the shell commands needed to install the special
-files in the file system to the file ``/dev/MAKEDEV'' or
-``/dev/MAKEDEV.local''.  This is discussed in the document ``Installing
-and Operating 4.4BSD''.

usr.sbin/config/SMM.doc/spell.ok

@@ -1,3 +1,4 @@
+# $FreeBSD$
 ACC
 ANSEL
 ARP
@@ -38,8 +39,6 @@ Info
 Karels
 LH
 Leffler
-MAKEDEV
-MAKEDEV.local
 MASSBUS
 MAXDSIZ
 MAXTSIZ