Commit Graph

450 Commits

Author SHA1 Message Date
Julian Elischer
46746c3b26 Add DEVFS to LINT 1995-12-10 10:50:32 +00:00
Poul-Henning Kamp
dd82b06157 Remove option ARP_PROXYALL, it's now a sysctl var. 1995-12-09 16:10:20 +00:00
Julian Elischer
87f6c6625d Pass 3 of the great devsw changes
most devsw referenced functions are now static, as they are
in the same file as their devsw structure. I've also added DEVFS
support for nearly every device in the system, however
many of the devices have 'incorrect' names under DEVFS
because I couldn't quickly work out the correct naming conventions.
(but devfs won't be coming on line for a month or so anyhow so that doesn't
matter)

If you "OWN" a device which would normally have an entry in /dev
then search for the devfs_add_devsw() entries and munge to make them right..
check out similar devices to see what I might have done in them in you
can't see what's going on..
for a laugh compare conf.c conf.h defore and after... :)
I have not doen DEVFS entries for any DISKSLICE devices yet as that will be
a much more complicated job.. (pass 5 :)

pass 4 will be to make the devsw tables of type (cdevsw * )
rather than (cdevsw)
seems to work here..
complaints to the usual places.. :)
1995-12-08 11:19:42 +00:00
Nate Williams
e9aaac99f2 GENERIC - Add a commented out line for adding support for IBM ThinkPad
keyboards

LINT - Add SCANSET=2 support to the LINT kernel and comments reflecting it's
       purpose.
1995-11-29 20:07:49 +00:00
Nate Williams
98e9e66ccb Add some comments above the npx0 device to make it even more obvious
that it is a mandatory device.
1995-11-29 20:02:29 +00:00
Jordan K. Hubbard
d01b66804a A batch of Jim Lowe's patches:
o Add signed/unsigned functionality to the matrox meteor device driver.
	o Apply a few fixes to the sound driver.
	o Add a ``SPIGOT_UNSECURE'' compile time definition so, if one defines
	  SPIGOT_UNSECURE in their conf file, then they can use the spigot w/o
	  root.  There is a warning that this allows users access to the IO
	  page which is probably not secure.
Submitted by:	james
1995-11-29 01:07:59 +00:00
David Greenman
a17c678ed2 Device driver for Intel Pro/100 PCI Fast Ethernet controller. 1995-11-28 23:55:26 +00:00
Peter Wemm
e7c234a1a1 Add and document the hooks for John Hay's Arnet sync driver... 1995-11-21 02:50:10 +00:00
David Greenman
82faa9875a i386 is defined by the compiler, so don't define it here. LOAD_ADDRESS
is only used in the Makefile, so don't define it in CFLAGS.
1995-11-19 19:49:43 +00:00
Bruce Evans
41e7c9b71d Restored the device-driverness off wd.c. It got lost when wdc was
introduced.
Fixed the device-driverness of atapi.c and spkr.c.

These changes are actually no-ops because ${DRIVER_C} is the same as
${NORMAL_C} for the i386.  I could do without magic CFLAGS.  Special
handling should be in the sources if possible.
1995-11-18 05:34:00 +00:00
Joerg Wunsch
ddae6790a3 Bump RELDATE to one more than the RELENG_2_1_0 branch, so one could
distinguish this from the version containing the NFSv3 code.
1995-11-10 21:52:59 +00:00
Justin T. Gibbs
e56e703606 Change ahb device line to eisaconf syntax. 1995-11-09 22:47:05 +00:00
Justin T. Gibbs
3501ce6d46 Convert Adaptec 1742 driver to new eisaconf interface. 1995-11-09 22:43:25 +00:00
John Dyson
bacc8b1678 Changes to existing files for ext2fs support. The UFS mods need rework
in the future as they are a bit crufty -- but at least the stuff is in the
tree now.
1995-11-05 23:36:07 +00:00
Justin T. Gibbs
eeb706c070 Add eisa0 and remove ISA configuration line for ahc0. 1995-11-05 17:02:54 +00:00
Justin T. Gibbs
a20c1076f6 Move aic7770.c to i386/eisa. It is the first driver to use the new eisaconf. 1995-11-05 04:38:55 +00:00
Bruce Evans
4ff3de8e80 Added `#include "ioconf.h"' to <machine/conf.h> and cleaned up the
misplaced extern declarations (mostly prototypes of interrupt handlers)
that this exposed.  The prototypes should be moved back to the driver
sources when the functions are staticalized.

Added idempotency guards to <machine/conf.h>.  "ioconf.h" can't be
included when building LKMs so define a wart in bsd.kmod.mk to help
guard against including it.
1995-11-04 17:08:13 +00:00
Peter Wemm
30a4b938d0 Add a DRIVER_S= definition that config wants to use for assembler
source.  This was copied from NORMAL_S..
1995-11-01 15:03:02 +00:00
Julian Elischer
1b3f472e51 Submitted by: Mike Mitchell (mitchell@ref.tfs.com)
these patches bring the ipx code up to the point that it compiles cleanly with
the -W arguments suggested by bruce.
1995-10-31 23:36:47 +00:00
Peter Wemm
099a8761f8 Update the file list for the new ppp files.. 1995-10-31 20:33:23 +00:00
Poul-Henning Kamp
dc9deb292c Get pccard stuff into LINT.
rename i386/isa/pcic.c to .../pcicx.c
this file will go away when the if_ze and if_zp dies.
1995-10-31 18:28:55 +00:00
Joerg Wunsch
49bdb5b8e7 Include the "od" driver. 1995-10-31 17:00:03 +00:00
Julian Elischer
f4567b9c1c Reviewed by: not yet
Submitted by:	fgray@rice.edu
this driver hasn't been checked but as a separate module, bringing it in won't
break anything else and it't the best way of testing it......

julian
1995-10-31 07:42:54 +00:00
Guido van Rooij
026d3dc8e3 When moving kernel to kernel.old, also change kern.bootfile.to
kernel.old. This is a solution for only the first install
on a running system, but it's better than it is now.
1995-10-30 20:20:49 +00:00
David Greenman
c91d636e6f Use the new config(8) %SFILES token to auto-generate the SFILES list.
Note: THIS REQUIRES THAT YOU REBUILD CONFIG(8)!!!
1995-10-29 11:10:53 +00:00
Mark Murray
1bb2d3142b Theodore Ts'po's random number gernerator for Linux, ported by me.
This code will only be included in your kernel if you have
'options DEVRANDOM', but that will fall away in a couple of days.
Obtained from: Theodore Ts'o, Linux
1995-10-28 16:58:05 +00:00
Julian Elischer
cc6a66f20e Reviewed by: julian and jhay@mikom.csir.co.za
Submitted by:	Mike Mitchell, supervisor@alb.asctmd.com

This is a bulk mport of Mike's IPX/SPX protocol stacks and all the
related gunf that goes with it..
it is not guaranteed to work 100% correctly at this time
but as we had several people trying to work on it
I figured it would be better to get it checked in so
they could all get teh same thing to work on..

Mikes been using it for a year or so
but on 2.0

more changes and stuff will be merged in from other developers now that this is in.

Mike Mitchell, Network Engineer
AMTECH Systems Corporation, Technology and Manufacturing
8600 Jefferson Street, Albuquerque, New Mexico 87113 (505) 856-8000
supervisor@alb.asctmd.com
1995-10-26 20:31:59 +00:00
Jordan K. Hubbard
9720b0841f Stable matcd port to 0x230, as per request by Bruce and Frank.
Submitted by: Frank Durda IV <uhclem@fw.ast.com>
1995-10-25 16:43:01 +00:00
Andrey A. Chernov
76021f6637 Reset only one necessary LC_ variable 1995-10-23 18:51:29 +00:00
Poul-Henning Kamp
e9dcb6be2d An even better idea: The default will be that on _${KMOD} (_nfs_mod...) will
be exported.  This breaks the compilation of some lkms, the owners of which
is kindly requested to consider what should be exported.
1995-10-15 16:56:56 +00:00
Poul-Henning Kamp
aa9134f375 Automatically DTRT for VFS_LKM 1995-10-15 16:46:00 +00:00
Poul-Henning Kamp
a304bf73a0 Make a rule for cleaning the namelist of lkms.
TXT & DATA symbols not explicitly mentioned will be made local.
1995-10-15 14:32:26 +00:00
Steven Wallace
6a461b22ae Update files list to include new ibcs2 files needed to compile. 1995-10-10 08:04:10 +00:00
Bruce Evans
65e8111ff0 Update comment and config for cy driver.
Extend test coverage:
Add and enable undocumented options TCPDEBUG, COMPAT_LINUX and IBCS2.
Add but disable (broken) pseudo device tb.
Add and enable pseudo devices su, ssc.
Add but disable (broken) devices sscape0, trix0.
Add and enable device bqu0.
1995-10-10 04:03:12 +00:00
Julian Elischer
ec477e8b5e add the file kern_conf.c so it con be compiled in when needed
for testing.. (for cdevsw_add and bdevsw_add)
1995-10-04 03:41:38 +00:00
Jordan K. Hubbard
8e4115484c Whoops, I misunderstood this. IRQ *12* is a better GUS default. 1995-10-03 01:12:59 +00:00
Garrett Wollman
973f098aab Compress manual pages (if desired) in the obj directory rather
than in the installation destination.  Should make release-building
substantially faster.  The msun Makefile changes simple adapt to the new
scheme.
1995-10-02 20:02:05 +00:00
Andrey A. Chernov
50c15f2110 Back out MTUDISC description per Garrett request, yet not ready 1995-09-27 19:12:20 +00:00
Andrey A. Chernov
aa3b19e087 Document MTUDISC 1995-09-27 17:26:30 +00:00
Peter Wemm
0d04cf6a1b Tone down the doom-and-gloom prediction if one enables the si driver.. 1995-09-23 08:52:30 +00:00
Bruce Evans
191e1a59da Remove transitory labelling code. Labels are now handled by essentially
the original 4.4lite code.  Machine Specific Partitions are now handled
separately.
1995-09-16 17:04:06 +00:00
Julian Elischer
a800f455b2 Submitted by: Luigi Rizzo (luigi@iet.unipi.it)
Obtained from: Luigi Rizzo and Gunther Schadow
config support for the asc driver and an example in LINT
1995-09-08 03:20:10 +00:00
Steven Wallace
ad1472b217 Change atapi.c to depend on the ATAPI option.
Add wd.c entry based on the wdc controller.
This will enable compilation of wcd device without wd.
1995-09-07 08:17:19 +00:00
Julian Elischer
7212976732 replaced 2 devfs files with one that replaces them 1995-09-06 09:25:04 +00:00
Jordan K. Hubbard
a50cd483d2 Bring the Digiboard driver (ALPHA version) into -current. Includes
latest patches for PC/Xe boards.
Submitted by:	"Serge A. Babkin" <babkin@hq.icb.chel.su>
1995-09-03 19:53:11 +00:00
Jordan K. Hubbard
d1a599c2de Something got spammed in my 2.2 work tree (don't know how :( ) and
had a 2.1 tag, thus sending these two changes into the 2.1 branch instead
of -current.  Argh.  I may bring these changes into the 2.1 anyway (they're
benign there) so I'm not going to admin them out of 2.1 for the time
being.
1995-09-01 20:53:44 +00:00
Andrey A. Chernov
413c9ee9cd Reset LANG and LC_TIME env. variables to produce english date 1995-08-29 16:08:27 +00:00
Jordan K. Hubbard
1d86961e14 Kernel components of Matrox Meteor driver.
Submitted by:	Mark Tinguely <tinguely@plains.nodak.edu> and Jim Lowe <james>
1995-08-28 17:03:18 +00:00
Joerg Wunsch
0f700bfda2 Add a comment that a user with many open windows under X might need to
bump CHILD_MAX.

Closes PR # conf/708: CHILD_MAX set rather low...

Submitted by:	careilly@monoid.cs.tcd.ie
1995-08-27 14:13:04 +00:00
Joerg Wunsch
e3553e7bcd Bump the OSRELDATE to 199508. Too many things have changed since
2.0.5, most notably the NFSv3 kernel support.

Reviewed by:	the mailing lists
1995-08-26 06:47:52 +00:00