Commit Graph

12340 Commits

Author SHA1 Message Date
Bill Paul
9a8c0cebf4 Make sure xdr_ypresp_all_seq() always returns a sane 'status' value.
(There were cases where it was leaving the status uninitialized.)
1996-02-04 05:05:43 +00:00
Wolfram Schneider
da2375658e Support killing of suid programs.
Now ``killall xterm'' works :-)

Don't fail for processes with meta chars (c+++)
1996-02-03 22:52:27 +00:00
Joerg Wunsch
d70e4e53de Try to preserve the fdisk table in the primary bootstrap, should it
already exist.

Mention the cases where this doesn't work in the BUGS section of the
man page.
1996-02-03 21:14:09 +00:00
Joerg Wunsch
017ef5fdc2 Create symlinks for vnboot and bootvn, too. 1996-02-03 21:12:27 +00:00
John Fieber
c5dba3fbf7 Fixed botched addition of Alexander Seth Jones.
Remember, checking for botched changes is as simple as typing `make'!
1996-02-03 17:17:56 +00:00
Andrey A. Chernov
219913d08e Print out media catalog number, if exists 1996-02-03 15:21:30 +00:00
Andrey A. Chernov
61c728296d Request/print out media catalog validation info in status command 1996-02-03 15:07:32 +00:00
Peter Wemm
5c8e1e6010 Fill in a lot of the missing blanks from the version I posted...
(better check to see that I've not misspelt somebody's name here, this
 info was collected from some strange places..)
1996-02-03 14:50:52 +00:00
Andrey A. Chernov
3025715460 Implement CD_MEDIA_CATALOG request for read_subchannel
Obtained from: NetBSD
1996-02-03 14:33:56 +00:00
Andrey A. Chernov
011d15478c Since ioc_read_subchannel don't used for hardware, remove padding.
Now almost all my changes backed out, expect one comment
about network byte order of LBA.
1996-02-03 14:19:13 +00:00
Andrey A. Chernov
5f0f376b27 Implement several new commands 1996-02-03 14:13:36 +00:00
Joerg Wunsch
c38a76a7d0 Add a quirk record for the Tandberg 42XX series. Not only that these
drives require ST_Q_SNS_HLP, they also wrongly accept a blocksize of
1024 in the first place (for a QIC-150 cartridge), but complain later
about it.  The hack is to only probe for 512 for them.

Reorder the entries in st_decide_mode() so that QIC >= 525 is properly
accepted as variable blocksize.
1996-02-03 13:31:13 +00:00
Joerg Wunsch
0f9a535124 Fix the borokeness that crept in with rev 1.10 of parser.c, the sh
didn't correctly start background jobs anymore.  Strange that nobody
was complaining...

Add a dummy target for `builtins' in the Makefile, to prevent it
from attempting to build this file by compiling builtins.c. :-/
1996-02-03 13:27:55 +00:00
Mark Murray
5bf1814b0e Rename des_set_key -> des_set_key_krb. (libdes conflict) 1996-02-03 11:51:19 +00:00
Mark Murray
d523df8926 Rename des_set_key -> des_set_key. (libdes conflict) 1996-02-03 11:49:29 +00:00
Poul-Henning Kamp
821c204e91 Make the sorting of IPFW rules an option. You don't want it to sort them.
>>>WARNING<<<  you may have to revisit your firewall setup.
1996-02-03 11:48:12 +00:00
Mark Murray
9e084cdbbc Rename des_set_key -> des_set_key_krb. This was a name conflict with a
documented routine in libdes.
1996-02-03 11:40:16 +00:00
Wolfram Schneider
1d6b2fd781 Submitted by: pst
add forgotten file calendar.h. Sorry.
1996-02-03 10:58:11 +00:00
Paul Traina
a74f01ce5e Add qcam.4 to directory, was only mlinking 1996-02-03 07:43:21 +00:00
Paul Traina
38751bfcd6 Only print statistics in verbose mode 1996-02-03 06:33:23 +00:00
Andrey A. Chernov
0b2207bcb3 Detect yet one kind of device (taken from NetBSD)
Use more accurate TOC size calculation
1996-02-03 00:06:49 +00:00
Jordan K. Hubbard
6ef18d7ac5 Add install script for doc, make bin install more intelligent. 1996-02-02 23:53:48 +00:00
Andrey A. Chernov
628257e0b0 Simplify READTOCENTRYS by removing fake leadout code,
SCSI system do it for us
1996-02-02 23:43:40 +00:00
Joerg Wunsch
863e656f6d Mention the currently supported vendor/model strings. 1996-02-02 23:01:17 +00:00
Joerg Wunsch
1d98b891d0 Add the HP4020i CD-R as a known device.
Reorder the CD-R entries in knowndevs[].

Submitted by:	fred@jjarray.umd.edu (Fred Cawthorne)
1996-02-02 22:59:48 +00:00
Joerg Wunsch
b73b631531 Add the Emulex MD21 ESDI-to-SCSI bridge as a known device (with more than
one LUN).
Submitted by:	Wilko Bulte
1996-02-02 22:57:27 +00:00
Mike Pritchard
790ae9291a Added a FreeBSD specific crash(8) man page that was adapted from
the hp300 crash(8) man page in the lite-2 source tree.

Also removed  man8/makedev.8 (this was vax specific and was replaced
by man8/man8.i386/MAKEDEV.8 a long time ago - it was just never removed
from the source tree).
1996-02-02 22:17:04 +00:00
Andrey A. Chernov
fccbca1d40 Don't mask last track number with end word, better be shure that it is 170 1996-02-02 22:14:39 +00:00
Andrey A. Chernov
1cf944e85c Implement PREVENT & CLOSE ioctls 1996-02-02 22:08:28 +00:00
Andrey A. Chernov
aeb13d5b74 Implement 'inject' command 1996-02-02 22:03:37 +00:00
Andrey A. Chernov
8b1448af24 Remove close tray on open - works very bad with xcdplayer 1996-02-02 21:18:02 +00:00
Andrey A. Chernov
c3ed4fcf9d Exchange addr_type<->control 1996-02-02 20:54:27 +00:00
Andrey A. Chernov
4a52a30aff Calculate TOC size to match what scsi cd says.
Exchange control<->addr_type fields
1996-02-02 20:50:04 +00:00
Andrey A. Chernov
3017478d1c Back out my control->addr_type change, need to be fixed in another place 1996-02-02 20:46:46 +00:00
Andrey A. Chernov
b03135a62b I forget the fact that cd_read_toc reads toc header in any case 1996-02-02 20:43:11 +00:00
Andrey A. Chernov
fd04d24d6b Remove #pragma pack, use byte filler in ioc_read_subchannel
instead, all other structures already aligned
1996-02-02 20:41:11 +00:00
Paul Traina
b184a4f4e4 Remove the ability for the user mode programs to specify bidirectional
vs unidirectional transfer modes.  The kernel handles hardware, user mode
programs shouldn't get in the way.

This cleans up some really ugly grots that I hated too. :-)

Suggested by: Sujal Patel <smpatel@wam.umd.edu>
1996-02-02 20:37:51 +00:00
Paul Traina
b0f4bf0063 Add support for Connectix QuickCam(tm)
* this is my unoptimized driver, it works fine, it's not as fast as it
* could be (yet) -- I have yet to merge in ideas from other QuickCam
* developers.
1996-02-02 19:27:57 +00:00
Paul Traina
0b59977032 Add support for Connectix QuickCam(tm)
* warning: this user interface is still in flux pending negotiations
* with other quickcam driver authors.  It is _not_ compatible with the
* original linux interface due to the fact that it was too restrictive.
1996-02-02 19:26:37 +00:00
Paul Traina
869fc587ed Add support for Connectix QuickCam(tm) 1996-02-02 19:25:24 +00:00
Paul Traina
744f4aaa11 Add Peter's list of major numbers 1996-02-02 19:12:43 +00:00
David Greenman
ac474627f4 Killed last change - it was bogus. cpu_switch() already assumes that
return address is on the stack.
1996-02-02 18:30:06 +00:00
Mike Pritchard
f3c0267f19 Fix some incorrect locations in the FILES sections of some man pages. 1996-02-02 18:22:04 +00:00
Mike Pritchard
ad27caee81 Added missing gsc(4) (Genius scanner related man page). 1996-02-02 18:12:12 +00:00
Mike Pritchard
5ea43fd200 Add some missing manual page links. 1996-02-02 17:48:46 +00:00
Paul Traina
4cf6236007 Add in hooks for quickcam driver 1996-02-02 06:55:35 +00:00
Wolfram Schneider
12e1f465dd recursive grep, enabled with -DHAVE_FTS=1
enable mmap (-DHAVE_MMAP=1)
1996-02-02 06:45:26 +00:00
Jordan K. Hubbard
15eb9fcea7 Understand about the doc distribution. 1996-02-02 06:44:02 +00:00
Wolfram Schneider
7a5ab50d3f man page link tmpfs.8 -> mfs.8 for former SunOS users 1996-02-02 06:31:57 +00:00
Jeffrey Hsu
eae4034b95 There is no longer a typedef clash with <rpc/auth.h>, so remove
conditional.  Also, use the system defined fixed sized types.
This removes a 32-bit dependency on non-32-bit architectures.
1996-02-02 06:17:42 +00:00