users should be configuring via m4 now. If set, use m4 to create the .cf
file. Also, if either SENDMAIL_MC or SENDMAIL_CF is set, 'make install' or
'make distribution' in src/etc/sendmail/ will install the appropriate .cf as
/etc/mail/sendmail.cf. This fixes some mergemaster problems.
PR: conf/13016
Makefile to the etc/sendmail Makefile to be consistent with all of the
other /var file creations. In doing so, change the Makefile target from
etc-sendmail.cf to distribution as it installs more than just the sendmail.cf.
pass udp from any 53 to ${oip}
allows an attacker to access ANY local port by simply binding his local
side to 53. The state keeping mechanism is the correct way to allow DNS
replies to go back to their source.
through the use of a new build directive, MACHINE_CPU, which contains a
list of the CPU generations/features for which optimizations are desired.
This feature will be extended to cover the ports tree in the future.
Currently OpenSSL provides optimizations for i386, i586 and i686-class
CPUs. Currently it has not been tested on an i386 or i486.
Teach make(1) to provide sensible defaults for MACHINE_CPU if it is not
defined (namely, the lowest common denominator CPU we support for each
architecture). Currently this is i386 for the i386 architecture and ev4
for the alpha. sys.mk also sets the variable as a last resort for
consistency with MACHINE_ARCH and bootstrapping from very old versions of
make.
Benchmarks show a significant speed increase even in the i386 case, with
additional improvements for i586 and i686 systems. For maximum performance
define MACHINE_CPU=i686 i586 i386 in /etc/make.conf.
Based on a patch submitted by: Mike Silbersack <silby@silby.com>
Reviewed by: current
trigger happy and turn off sendmail_enable entirely (instead of setting
sendmail_flags to -q30m instead). I have seen boxes with things like daily
run reports that have sat in mailq for 5 months. Since /usr/sbin/sendmail
is actually mailwrapper, this should be safe for the other plugins that
provide the sendmail calling interface.
default syslog target for console messages (when enabled in
syslog.conf). Use the same rotation defaults as with
/var/log/messages -- every 100kb of log, compress back logs,
and keep five rotated logs.
o Note: phk also thought it would be useful to force rotation
each boot. This commit does not introduce such a rotation.
Reviewed by: phk
compiled in. This involves a commented out sshd line to match the
remainder of the commented out pam_kerberosIV.so entries. This
doesn't quite restore the correct behavior, as ticket files are
not managed properly, but it's an improvement.
Forgotten by: green
just messages{,.0*} when looking for login failures and refused
connections.
PR: 23415
Mostly submitted by: phk
Convert a few " "s to tabs while I'm here - for consistency.
reference. The sysinstall binary is now in root's standard PATH,
so there's no need for explicit pathing, and there's some value
in a manual page reference.
- ipv6_network_interfaces has all available interfaces to work for
static configuration even if the host is end host. When rtsol is
invoked, singleness of interface is checked.
it at boot time closer to the way we want it to be in the final version.
* Move the default directory to /var/db/entropy
* Run the entropy saving cron job every 11 minutes. This seems
to be a better default, although still bikeshed material.
* Feed /dev/random some cheesy "entropy" from various commands
and files before the disks are mounted. This gives /dev/random
a better chance of running without blocking early.
* Move the reseeding with previously stored entropy to the point
immediately after the disks are mounted.
* Make the harvesting script a little safer in regards to the
possibility of accidentally overwriting something other
than a regular file.
it can be used to reseed at boot time. This will greatly increase
the chances that there will be sufficient entropy available at
boot time to prevent long delays.
For /etc/rc, remove the vmstat and iostat runs from the attempt
to provide some cheesy randomness if the files fail, since
those programs are dynamically linked, and ldd seems to want
some randomness to do its magic.
Guidance and parameters for this project were provided by
Mark Murray, based on the requirements of the Yarrow
algorithm. Some helpful suggestions for implementation
(including the tip about iostat and vmstat) were provided
by Sheldon Hearn. All blame for problems or mistakes is
mine of course.
as the previous line already tells us we are in rc.${MACHINE_ARCH}. This
also allows more syscons configuration messages during startup to fit on
one line.
Reviewed by: dougb
one-way hash functions for authentication purposes. There is no more
"set the libcrypt->libXXXcrypt" nightmare.
- Undo the libmd.so hack, use -D to hide the md5c.c internals.
- Remove the symlink hacks in release/Makefile
- the algorthm is set by set_crypt_format() as before. If this is
not called, it tries to heuristically figure out the hash format, and
if all else fails, it uses the optional auth.conf entry to chose the
overall default hash.
- Since source has non-hidden crypto in it there may be some issues with
having the source it in some countries, so preserve the "secure/*"
division. You can still build a des-free libcrypt library if you want
to badly enough. This should not be a problem in the US or exporting
from the US as freebsd.org had notified BXA some time ago. That makes
this stuff re-exportable by anyone.
- For consistancy, the default in absence of any other clues is md5. This
is to try and minimize POLA across buildworld where folk may suddenly
be activating des-crypt()-hash support. Since the des hash may not
always be present, it seemed sensible to make the stronger md5 algorithm
the default.
All things being equal, no functionality is lost.
Reviewed-by: jkh
(flame-proof suit on)
o Add the removable_interfaces variable for list of removable network
interfaces (PC-card ethernet, wireless network and USB ethernet etc).
o ifconfig_<ifn>_alias0, static_routes_<ifn>, removable_route_flush,
/etc/start_if.<ifn> and /etc/stop_if.<ifn> are support.
o removable_route_flush variable is set to "NO" if you want to use the
machine as gateway using two or more removable network cards. If
static routing is needed use static_routes_<ifn> instead of
static_routes or defaultrouter.
o The optional static_routes_<ifn> variable is likely static_routes.
o /etc/start_if.<ifn> and /etc/stop_if.<ifn> are shell script to be
specified that are called when a card is inserted or removed.
multifunction cards and I recieved reports that the card does not
workd by `config auto'. (MFPAO)
o Remove static assign of the IRQ number.
o Remove two duplicated entries.
o Join some entries using regex and fixed matching order problem.
These changes for boot.flp.
Suggested by: sanpei
distinction between the OS copyright message and the message displayed
gratuitously to each user at login. Because, well, they may be
different, among other things, and boy can a copyright message each
login consume some screen space. If people really want to do this,
they can copy /COPYRIGHT to /etc/COPYRIGHT.
Submitted by: Anders Andersson <anders@codefactory.se>
require the addition of flag 0x80000 to their config line in
pccard.conf(5). This flag is not optional. These Linksys cards will
not be recognized without it.
Reviewed by: imp, iwasaki
Apply a more consistent style to the echo statements in /etc/ scripts.
* Put quotes around each line
* Single quotes for lines with no variable interpolation
* Double quotes if there is
* Capitalize each word that begins a line
* Make echo -n 'Doing foo:' ... echo '.' more of a standard
Also:
* Use rm -f on /var/run/dev.db so if it's not there (devfs) it doesn't error
* Shorten the ldconfig messages so that the default fits on one line
* Test whether /var/msgs/bounds is a link before overwriting it
* Generally futz around with whitespace
* Put quotes around each line
* Single quotes for lines with no variable interpolation
* Double quotes if there is
* Capitalize each word that begins a line
* Make echo -n 'Doing foo:' ... echo '.' more of a standard
No functionality changes
In a few days I will commit a patch which changes vn(4) to use the
disk-minilayer. This will make vn(4) fully DEVFS friendly but have
the side effect that vnconfig needs the vn%d.ctl devices to be able
to configure vn(4).
Please remake your /dev/vn entries with this revision of MAKEDEV if
you don't rung DEVFS already.
from "PCMCIA SCSI MBH1040" to "PCMCIA SCSI MBH10401" "01". They are
based on the spc driver.
This will fix the conflicts of entry with REX-5536AM, REX-9836A,
and ICM PSC-2401 ("MBH10404" ones) which are based on stg driver.
The problem was pointed out in bsd-nomads several times since PAO2 days.
-Comment out the entry for "MBH10401" ones. The spc driver is
not supported yet.
-Add more comment about cards which has broken CIS
(some cards which has tuple of "PCMCIA SCSI MBH10404" "01").
Reported by: takachan@running-dog.net, y-nakaga@nwsl.mesh.ad.jp,
yuki@dayo.ne.jp
Obtained from: discussion in bsd-nomads mailing list
for a hung `daily' run to keep a `weekly' run from happening.
Same for `monthly'. We have always run `weekly' and `monthly' reguardless
of the execution status of `daily'. Until there is some consensus we should
not change the behavior.
On Saturdays, run daily and weekly sequentially, starting at 03:01 am.
This prevents daily and weekly from overlapping, while running weekly as
early as possible (i.e. as soon as daily finishes) to give it time to
finish before monthly starts at 05:30 am.
It's probably possible to do something similar with monthly, making it
run as soon as daily (and possibly weekly, if the first of the month
is a Saturday) finishes, but this is left as an exercise for the reader.
