Use SYMLINKS instead of an ad hoc rule for installing words -> web2.
Don't override the install target; doing so just breaks things like
SYMLINKS.
Don't override the correct defaults for the all, clean, depend, lint
and tags targets. Don't add a null rule to the cleandepend target.
needed to access the internals of buffers but not necessarily to use
the VOP. <sys/buf.h> recently grew a bogus dependency on <sys/systm.h>
for the declaration of spl*, and I prefer to fix the synopsis breakage
by removing a wart instead of adding one.
VOP_ABORTOP() went away. at_shutdown() was replaced by undocumented
event handling. Rename remove_dev() here too, and remove the dead
and dead wrong man pages.
misdetecting FIFO capabilities, at least on my girlfriend's Thinkpad 755,
the driver doesn't work using the FIFO.
While i was at it, i (partially) fixed option FCC_YE since it would no
longer have compiled at all under -current. I've also made an attempt
to document the device driver flags value (ab-)used internally by this
option.
RELENG_3 candidate, but with a slightly different patch there (will go
to jkh in email).
parent being locked, but rather plays some hide and seek (does not lock if
dvp == vp).
Also add a BUGS section noting that this is undesired behaviour.
- isa => nexus
- flags
- GPL_MATH_EMULATE
- document breakage of non-GPL emulator since we use new compiler.
- break lines in paragraohs I touched so that sentenses start on new
lines.
we use. The .c half is statically compiled into the kernel. It's kinda
silly to generate a .h file on the fly that has inlines to call the
.c stuff when the .c code is fixed.
Also, zap the special treatment for VFS_KLD modules. This treatment
applies to lots of things, not just VFS's.
of manual page sections. Make the two man pages consistent
with each other in the headers they list and they order they list
them in.
Note: this is the preferred ordering. All new man pages/additions
to man pages should try and follow this. Existing man pages
should be left alone, unless you are making major changes in
the man page and re-ordering of the sections is only a
minor part of the change.
PR: doc/15352, doc/15353
background ]
Rename sys/pci/pci_ioctl.h to sys/sys/pciio.h to make it easier for
userland programs to use this interface. Reformat the file, and add a
BSD-style copyright to it.
Add a new man page for pci(4). The PCIOCGETCONF, PCIOCREAD, and PCIOCWRITE
ioctls are documented, but the PCIOCATTACHED ioctl is not documented
because it is not implemented.
Change includes of <pci/pci_ioctl.h> to <sys/pciio.h> or remove them
altogether. In many cases, pci_ioctl.h was unused.
Reviewed by: steve
The same goes for CD drivers and tape drivers. In systems with mixed IDE
and SCSI, devices in the same priority class will be sorted in attach
order.
Also, the 'CCD' priority is now the 'ARRAY' priority, and a number of
drivers have been modified to use that priority.
This includes the necessary changes to all drivers, except the ATA drivers.
Soren will modify those separately.
This does not include and does not require any change in the devstat
version number, since no known userland applications use the priority
enumerations.
Reviewed by: msmith, sos, phk, jlemon, mjacob, bde
which it replaces. The new driver supports all of the chips supported
by the ones it replaces, as well as many DEC/Intel 21143 10/100 cards.
This also completes my quest to convert things to miibus and add
Alpha support.
[This] updates [elf.5] from the enitial work I did in Queen's (UK) English to
American English, as is normal for the -doc project stuff.
Submitted by: Jeroen Ruigrok van der Werven <asmodai@wxs.nl>
- Add Spanish messages to new keymaps.
- Improve other Spanish messages.
Fix minor bits in the previous commit:
- Fix a German message entry erroneously classified as English.
- Sort entries.
Submitted by: Jose M Alcaide <jose@we.lc.ehu.es>
NGM_BINARY2ASCII, which convert control messages to ASCII and back.
This allows control messages to be sent and received in ASCII form
using ngctl(8), which makes ngctl a lot more useful.
This also allows all the type-specific debugging code in libnetgraph
to go away -- instead, we just ask the node itself to do the ASCII
translation for us.
Currently, all generic control messages are supported, as well as
messages associated with the following node types: async, cisco,
ksocket, and ppp.
See /usr/share/examples/netgraph/ngctl for an example of using this.
Also give ngctl(8) the ability to print out incoming data and
control messages at any time. Eventually nghook(8) may be subsumed.
Several other misc. bug fixes.
Reviewed by: julian
Add new keymaps: swissfrench.iso.acc.kbd, swissgerman.acc.kbd,
swissfrench.cp850.kbd, and swissgerman.cp850.kbd.
PR: conf/14667
Submitted by: Blapp Martin (mb@imb.ch)
Tested by: a number of Swiss users.
files (opt_*.h) automatically (if they are in ${SRCS}).
Clean vnode_if.[ch] automatically (if one of them is in ${SRCS}, not just
if VFS_KLD is defined).
There are some complications to avoid using the "@" symlink before it
is built.
eischen (Daniel Eischen) added wrappers to protect against cancled
threads orphaning internal resources.
the cancelability code is still a bit fuzzy but works for test
programs of my own, OpenBSD's and some examples from ORA's books.
add readdir_r to both libc and libc_r
add some 'const' attributes to function parameters
Reviewed by: eischen, jasone
ombudsman
and its mate
ombudsmanship
since I've had ispell (which uses /usr/share/dict/words) flag it too
many times.
Thanks to phk for telling me the other word is kokkenmoding, an
archaeological term for a pile of oystershells and other debiris from
a stone-age household. I didn't add it to the list, however, since
none of the online dictionaries that I looked at had it in them.
Gotta find that oed lookup link :-)
linked list to store the callbak routines. The patch converts the
lists to queue(3) TAILQs, making the code slightly clearer and ensuring
that callbacks are executed in FIFO order.
Man page also updated as necesary.
(discontinued use of M_TEMP malloc type while here anyway /phk)
Submitted by: Jake Burkholder jake@checker.org
PR: 14912
All Makefiles now use MACHINE_ARCH for the target architecture.
Unification is required for cross-building.
Tags added to:
sys/boot/Makefile
sys/boot/arc/loader/Makefile
sys/kern/Makefile
usr.bin/cpp/Makefile
usr.bin/gcore/Makefile
usr.bin/truss/Makefile
usr.bin/gcore/Makefile:
fixed typo: MACHINDE -> MACHINE_ARCH
It adds new functions and extend some structures and can handle
VESA modes.
- Update the man page.
- Bump the library version number.
(The old version will be added to compat3x.)
Correct the date on which DST begins in Victoria and New South Wales
in the year 2000: as the result of some local function in Sydney, DST
will begin on Sunday, 27 August instead of Sunday, 29 Cotober.
This change had already been made, but the date was incorrectly
specified as (Saturday) 26 August.
Submitted by: Howard Lowndes <lannet@lannet.com.au>
thank Jeroen and all who helped bring it about :)
Submitted by: Jeroen Ruigrok van der Werven <asmodai@wxs.nl>
Reviewed by: jdp, Gerald Hicks, the Doc Team
thank Jeroen and all who helped bring it about :)
Submitted by: Jeroen Ruigrok van der Werven <asmodai@wxs.nl>
Reviewed by: jdp, Gerald Hicks, the Doc Team
"rw" argument, rather than hijacking B_{READ|WRITE}.
Fix two bugs (physio & cam) resulting by the confusion caused by this.
Submitted by: Tor.Egge@fast.no
Reviewed by: alc, ken (partly)
Been in production for 3 years now. Gives Instant Frame relay to if_sr
and if_ar drivers, and PPPOE support soon. See:
ftp://ftp.whistle.com/pub/archie/netgraph/index.html
for on-line manual pages.
Reviewed by: Doug Rabson (dfr@freebsd.org)
Obtained from: Whistle CVS tree
In order to make this work, I created a pseudo-PHY driver to deal with
Macronix chips that use the built-in NWAY support and symbol mode port.
This is actually all of them, with the exception of the original MX98713
which presents its NWAY support via the MII serial interface.
The mxphy driver actually manipulates the controller registers directly
rather than using the miibus_readreg()/miibus_writereg() bus interface
since there are no MII registers to read. The mx driver itself pretends
that the NWAY interface is a PHY locayed at MII address 31 for the sole
purpose of allowing the mxphy_probe() routine to know when it needs to
attach to a host controller.
