# # On the handling of kernel options # # All kernel options should be listed in NOTES, with suitable # descriptions. Negative options (options that make some code not # compile) should be commented out; LINT (generated from NOTES) should # compile as much code as possible. Try to structure option-using # code so that a single option only switch code on, or only switch # code off, to make it possible to have a full compile-test. If # necessary, you can check for COMPILING_LINT to get maximum code # coverage. # # All new options shall also be listed in either "conf/options" or # "conf/options.". Options that affect a single source-file # .[c|s] should be directed into "opt_.h", while options # that affect multiple files should either go in "opt_global.h" if # this is a kernel-wide option (used just about everywhere), or in # "opt_.h" if it affects only some files. # Note that the effect of listing only an option without a # header-file-name in conf/options (and cousins) is that the last # convention is followed. # # This handling scheme is not yet fully implemented. # # # Format of this file: # Option name filename # # If filename is missing, the default is # opt_.h AAC_DEBUG opt_aac.h AACRAID_DEBUG opt_aacraid.h AHC_ALLOW_MEMIO opt_aic7xxx.h AHC_TMODE_ENABLE opt_aic7xxx.h AHC_DUMP_EEPROM opt_aic7xxx.h AHC_DEBUG opt_aic7xxx.h AHC_DEBUG_OPTS opt_aic7xxx.h AHC_REG_PRETTY_PRINT opt_aic7xxx.h AHD_DEBUG opt_aic79xx.h AHD_DEBUG_OPTS opt_aic79xx.h AHD_TMODE_ENABLE opt_aic79xx.h AHD_REG_PRETTY_PRINT opt_aic79xx.h # Debugging options. ALT_BREAK_TO_DEBUGGER opt_kdb.h BREAK_TO_DEBUGGER opt_kdb.h BUF_TRACKING opt_global.h DDB DDB_BUFR_SIZE opt_ddb.h DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h DDB_CAPTURE_MAXBUFSIZE opt_ddb.h DDB_CTF opt_ddb.h DDB_NUMSYM opt_ddb.h EARLY_PRINTF opt_global.h FULL_BUF_TRACKING opt_global.h GDB KDB opt_global.h KDB_TRACE opt_kdb.h KDB_UNATTENDED opt_kdb.h KLD_DEBUG opt_kld.h NUM_CORE_FILES opt_global.h QUEUE_MACRO_DEBUG_TRACE opt_global.h QUEUE_MACRO_DEBUG_TRASH opt_global.h SYSCTL_DEBUG opt_sysctl.h TEXTDUMP_PREFERRED opt_ddb.h TEXTDUMP_VERBOSE opt_ddb.h TSLOG opt_global.h TSLOG_PAGEZERO opt_global.h TSLOGSIZE opt_global.h # Miscellaneous options. ALQ ALTERA_SDCARD_FAST_SIM opt_altera_sdcard.h ATSE_CFI_HACK opt_cfi.h AUDIT opt_global.h BOOTHOWTO opt_global.h BOOTVERBOSE opt_global.h CALLOUT_PROFILING CAPABILITIES opt_capsicum.h CAPABILITY_MODE opt_capsicum.h CC_CDG opt_global.h CC_CHD opt_global.h CC_CUBIC opt_global.h CC_DEFAULT opt_cc.h CC_DCTCP opt_global.h CC_HD opt_global.h CC_HTCP opt_global.h CC_NEWRENO opt_global.h CC_VEGAS opt_global.h COMPAT_43 opt_global.h COMPAT_43TTY opt_global.h COMPAT_FREEBSD4 opt_global.h COMPAT_FREEBSD5 opt_global.h COMPAT_FREEBSD6 opt_global.h COMPAT_FREEBSD7 opt_global.h COMPAT_FREEBSD9 opt_global.h COMPAT_FREEBSD10 opt_global.h COMPAT_FREEBSD11 opt_global.h COMPAT_FREEBSD12 opt_global.h COMPAT_FREEBSD13 opt_global.h COMPAT_FREEBSD14 opt_global.h COMPAT_LINUXKPI opt_dontuse.h COMPILING_LINT opt_global.h CY_PCI_FASTINTR DEADLKRES opt_watchdog.h EXPERIMENTAL opt_global.h DIRECTIO FFCLOCK FULL_PREEMPTION opt_sched.h GZIO opt_gzio.h IMGACT_BINMISC opt_dontuse.h IPI_PREEMPTION opt_sched.h GEOM_CACHE opt_geom.h GEOM_CONCAT opt_geom.h GEOM_ELI opt_geom.h GEOM_GATE opt_geom.h GEOM_JOURNAL opt_geom.h GEOM_LABEL opt_geom.h GEOM_LABEL_GPT opt_geom.h GEOM_LINUX_LVM opt_geom.h GEOM_MAP opt_geom.h GEOM_MIRROR opt_geom.h GEOM_MOUNTVER opt_geom.h GEOM_MULTIPATH opt_geom.h GEOM_NOP opt_geom.h GEOM_PART_APM opt_geom.h GEOM_PART_BSD opt_geom.h GEOM_PART_BSD64 opt_geom.h GEOM_PART_EBR opt_geom.h GEOM_PART_GPT opt_geom.h GEOM_PART_LDM opt_geom.h GEOM_PART_MBR opt_geom.h GEOM_RAID opt_geom.h GEOM_RAID3 opt_geom.h GEOM_SHSEC opt_geom.h GEOM_STRIPE opt_geom.h GEOM_UZIP opt_geom.h GEOM_UZIP_DEBUG opt_geom.h GEOM_VINUM opt_geom.h GEOM_VIRSTOR opt_geom.h GEOM_ZERO opt_geom.h IFLIB opt_iflib.h KDTRACE_HOOKS opt_global.h KDTRACE_FRAME opt_kdtrace.h KDTRACE_MIB_SDT opt_global.h KN_HASHSIZE opt_kqueue.h KSTACK_MAX_PAGES KSTACK_PAGES KSTACK_USAGE_PROF KTRACE KTRACE_REQUEST_POOL opt_ktrace.h LIBICONV MAC opt_global.h MAC_BIBA opt_dontuse.h MAC_BSDEXTENDED opt_dontuse.h MAC_DDB opt_dontuse.h MAC_DEBUG opt_mac.h MAC_IFOFF opt_dontuse.h MAC_IPACL opt_dontuse.h MAC_LOMAC opt_dontuse.h MAC_MLS opt_dontuse.h MAC_NONE opt_dontuse.h MAC_NTPD opt_dontuse.h MAC_PARTITION opt_dontuse.h MAC_PORTACL opt_dontuse.h MAC_PRIORITY opt_dontuse.h MAC_SEEOTHERUIDS opt_dontuse.h MAC_STATIC opt_mac.h MAC_STUB opt_dontuse.h MAC_TEST opt_dontuse.h MAC_GRANTBYLABEL opt_dontuse.h MAC_VERIEXEC opt_dontuse.h MAC_VERIEXEC_DEBUG opt_mac.h MAC_VERIEXEC_SHA1 opt_dontuse.h MAC_VERIEXEC_SHA256 opt_dontuse.h MAC_VERIEXEC_SHA384 opt_dontuse.h MAC_VERIEXEC_SHA512 opt_dontuse.h MD_ROOT opt_md.h MD_ROOT_FSTYPE opt_md.h MD_ROOT_READONLY opt_md.h MD_ROOT_SIZE opt_md.h MD_ROOT_MEM opt_md.h MFI_DEBUG opt_mfi.h MFI_DECODE_LOG opt_mfi.h MPROF_BUFFERS opt_mprof.h MPROF_HASH_SIZE opt_mprof.h NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h NO_ADAPTIVE_RWLOCKS NO_ADAPTIVE_SX NO_OBSOLETE_CODE opt_global.h NO_SYSCTL_DESCR opt_global.h NSWBUF_MIN opt_param.h MBUF_PACKET_ZONE_DISABLE opt_global.h PANIC_REBOOT_WAIT_TIME opt_panic.h PCI_HP opt_pci.h PCI_IOV opt_global.h PPC_DEBUG opt_ppc.h PPC_PROBE_CHIPSET opt_ppc.h PPS_SYNC opt_ntp.h PREEMPTION opt_sched.h QUOTA SCHED_4BSD opt_sched.h SCHED_STATS opt_sched.h SCHED_ULE opt_sched.h SLEEPQUEUE_PROFILING SLHCI_DEBUG opt_slhci.h SOCKET_HHOOK opt_global.h STACK opt_stack.h SUIDDIR MSGMNB opt_sysvipc.h MSGMNI opt_sysvipc.h MSGSEG opt_sysvipc.h MSGSSZ opt_sysvipc.h MSGTQL opt_sysvipc.h SEMMNI opt_sysvipc.h SEMMNS opt_sysvipc.h SEMMNU opt_sysvipc.h SEMMSL opt_sysvipc.h SEMOPM opt_sysvipc.h SEMUME opt_sysvipc.h SHMALL opt_sysvipc.h SHMMAX opt_sysvipc.h SHMMAXPGS opt_sysvipc.h SHMMIN opt_sysvipc.h SHMMNI opt_sysvipc.h SHMSEG opt_sysvipc.h SYSVMSG opt_sysvipc.h SYSVSEM opt_sysvipc.h SYSVSHM opt_sysvipc.h SW_WATCHDOG opt_watchdog.h TCPHPTS TCP_REQUEST_TRK opt_global.h TCP_ACCOUNTING opt_global.h TCP_BBR opt_inet.h TCP_RACK opt_inet.h # # TCP SaD Detection is an experimental Sack attack Detection (SaD) # algorithm that uses "normal" behaviour with SACK's to detect # a possible attack. It is strictly experimental at this point. # TURNSTILE_PROFILING UMTX_PROFILING UMTX_CHAINS opt_global.h VERBOSE_SYSINIT ZSTDIO opt_zstdio.h # Sanitizers COVERAGE opt_global.h KASAN opt_global.h KCOV KCSAN opt_global.h KMSAN opt_global.h KUBSAN opt_global.h # POSIX kernel options P1003_1B_MQUEUE opt_posix.h P1003_1B_SEMAPHORES opt_posix.h _KPOSIX_PRIORITY_SCHEDULING opt_posix.h # Do we want the config file compiled into the kernel? INCLUDE_CONFIG_FILE opt_config.h # Options for static filesystems. These should only be used at config # time, since the corresponding lkms cannot work if there are any static # dependencies. Unusability is enforced by hiding the defines for the # options in a never-included header. AUTOFS opt_dontuse.h CD9660 opt_dontuse.h EXT2FS opt_dontuse.h FDESCFS opt_dontuse.h FFS opt_dontuse.h FUSEFS opt_dontuse.h MSDOSFS opt_dontuse.h NULLFS opt_dontuse.h PROCFS opt_dontuse.h PSEUDOFS opt_dontuse.h SMBFS opt_dontuse.h TARFS opt_dontuse.h TMPFS opt_dontuse.h UDF opt_dontuse.h UNIONFS opt_dontuse.h ZFS opt_dontuse.h P9FS opt_dontuse.h # Pseudofs debugging PSEUDOFS_TRACE opt_pseudofs.h # Tarfs debugging TARFS_DEBUG opt_tarfs.h # In-kernel GSS-API KGSSAPI opt_kgssapi.h KGSSAPI_DEBUG opt_kgssapi.h # These static filesystems have one slightly bogus static dependency in # sys/i386/i386/autoconf.c. If any of these filesystems are # statically compiled into the kernel, code for mounting them as root # filesystems will be enabled - but look below. # NFSCL - client # NFSD - server NFSCL opt_nfs.h NFSD opt_nfs.h # filesystems and libiconv bridge CD9660_ICONV opt_dontuse.h MSDOSFS_ICONV opt_dontuse.h UDF_ICONV opt_dontuse.h # If you are following the conditions in the copyright, # you can enable soft-updates which will speed up a lot of thigs # and make the system safer from crashes at the same time. # otherwise a STUB module will be compiled in. SOFTUPDATES opt_ffs.h # On small, embedded systems, it can be useful to turn off support for # snapshots. It saves about 30-40k for a feature that would be lightly # used, if it is used at all. NO_FFS_SNAPSHOT opt_ffs.h # Enabling this option turns on support for Access Control Lists in UFS, # which can be used to support high security configurations. Depends on # UFS_EXTATTR. UFS_ACL opt_ufs.h # Enabling this option turns on support for extended attributes in UFS-based # filesystems, which can be used to support high security configurations # as well as new filesystem features. UFS_EXTATTR opt_ufs.h UFS_EXTATTR_AUTOSTART opt_ufs.h # Enable fast hash lookups for large directories on UFS-based filesystems. UFS_DIRHASH opt_ufs.h # Enable gjournal-based UFS journal. UFS_GJOURNAL opt_ufs.h # The below sentence is not in English, and neither is this one. # We plan to remove the static dependences above, with a # _ROOT option to control if it usable as root. This list # allows these options to be present in config files already (though # they won't make any difference yet). NFS_ROOT opt_nfsroot.h # SMB/CIFS requester NETSMB opt_netsmb.h # Enable debugnet(4) networking support. DEBUGNET opt_global.h # Enable netdump(4) client support. NETDUMP opt_global.h # Enable netgdb(4) support. NETGDB opt_global.h # Options used only in subr_param.c. HZ opt_param.h MAXFILES opt_param.h NBUF opt_param.h NSFBUFS opt_param.h VM_BCACHE_SIZE_MAX opt_param.h VM_SWZONE_SIZE_MAX opt_param.h MAXUSERS DFLDSIZ opt_param.h MAXDSIZ opt_param.h MAXSSIZ opt_param.h # Generic SCSI options. CAM_MAX_HIGHPOWER opt_cam.h CAMDEBUG opt_cam.h CAM_DEBUG_COMPILE opt_cam.h CAM_DEBUG_DELAY opt_cam.h CAM_DEBUG_BUS opt_cam.h CAM_DEBUG_TARGET opt_cam.h CAM_DEBUG_LUN opt_cam.h CAM_DEBUG_FLAGS opt_cam.h CAM_BOOT_DELAY opt_cam.h CAM_IOSCHED_DYNAMIC opt_cam.h CAM_IO_STATS opt_cam.h CAM_TEST_FAILURE opt_cam.h SCSI_DELAY opt_scsi.h SCSI_NO_SENSE_STRINGS opt_scsi.h SCSI_NO_OP_STRINGS opt_scsi.h # Options used only in cam/ata/ata_da.c ATA_STATIC_ID opt_ada.h # Options used only in cam/scsi/scsi_cd.c CHANGER_MIN_BUSY_SECONDS opt_cd.h CHANGER_MAX_BUSY_SECONDS opt_cd.h # Options used only in cam/scsi/scsi_da.c DA_TRACK_REFS opt_da.h # Options used only in cam/scsi/scsi_sa.c. SA_IO_TIMEOUT opt_sa.h SA_SPACE_TIMEOUT opt_sa.h SA_REWIND_TIMEOUT opt_sa.h SA_ERASE_TIMEOUT opt_sa.h SA_1FM_AT_EOD opt_sa.h # Options used only in cam/scsi/scsi_pt.c SCSI_PT_DEFAULT_TIMEOUT opt_pt.h # Options used only in cam/scsi/scsi_ses.c SES_ENABLE_PASSTHROUGH opt_ses.h # Options used in dev/sym/ (Symbios SCSI driver). SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 # disabled:0 (default), enabled:1 SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking # disabled:0, enabled:1 (default) SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported # default:8, range:[1..64] # Options used only in dev/isp/* ISP_TARGET_MODE opt_isp.h ISP_FW_CRASH_DUMP opt_isp.h ISP_DEFAULT_ROLES opt_isp.h ISP_INTERNAL_TARGET opt_isp.h ISP_FCTAPE_OFF opt_isp.h # Net stuff. ACCEPT_FILTER_DATA ACCEPT_FILTER_DNS ACCEPT_FILTER_HTTP ACCEPT_FILTER_TLS ALTQ opt_global.h ALTQ_CBQ opt_altq.h ALTQ_CDNR opt_altq.h ALTQ_CODEL opt_altq.h ALTQ_DEBUG opt_altq.h ALTQ_HFSC opt_altq.h ALTQ_FAIRQ opt_altq.h ALTQ_NOPCC opt_altq.h ALTQ_PRIQ opt_altq.h ALTQ_RED opt_altq.h ALTQ_RIO opt_altq.h BOOTP opt_bootp.h BOOTP_BLOCKSIZE opt_bootp.h BOOTP_COMPAT opt_bootp.h BOOTP_NFSROOT opt_bootp.h BOOTP_NFSV3 opt_bootp.h BOOTP_WIRED_TO opt_bootp.h DEVICE_POLLING DUMMYNET opt_ipdn.h RATELIMIT opt_ratelimit.h RATELIMIT_DEBUG opt_ratelimit.h INET opt_inet.h INET6 opt_inet6.h STATS opt_global.h IPDIVERT IPFILTER opt_ipfilter.h IPFILTER_DEFAULT_BLOCK opt_ipfilter.h IPFILTER_LOG opt_ipfilter.h IPFILTER_LOOKUP opt_ipfilter.h IPFIREWALL opt_ipfw.h IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h IPFIREWALL_NAT opt_ipfw.h IPFIREWALL_NAT64 opt_ipfw.h IPFIREWALL_NPTV6 opt_ipfw.h IPFIREWALL_VERBOSE opt_ipfw.h IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h IPFIREWALL_PMOD opt_ipfw.h IPSEC opt_ipsec.h IPSEC_DEBUG opt_ipsec.h IPSEC_SUPPORT opt_ipsec.h IPSEC_OFFLOAD opt_ipsec.h IPSTEALTH KERN_TLS KRPC LIBALIAS LIBMCHAIN MBUF_PROFILING MBUF_STRESS_TEST MROUTING opt_mrouting.h NFSLOCKD NETLINK opt_global.h PF_DEFAULT_TO_DROP opt_pf.h ROUTE_MPATH opt_route.h ROUTETABLES opt_route.h FIB_ALGO opt_route.h RSS opt_rss.h SLIP_IFF_OPTS opt_slip.h TCPPCAP opt_global.h SIFTR TCP_BLACKBOX opt_global.h TCP_HHOOK opt_global.h TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading TCP_RFC7413 opt_inet.h TCP_RFC7413_MAX_KEYS opt_inet.h TCP_RFC7413_MAX_PSKS opt_inet.h TCP_SIGNATURE opt_ipsec.h VLAN_ARRAY opt_vlan.h XDR XBONEHACK # # SCTP # SCTP opt_sctp.h SCTP_SUPPORT opt_sctp.h SCTP_DEBUG opt_sctp.h # Enable debug printfs SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns. SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats. SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs SCTP_LOCAL_TRACE_BUF opt_sctp.h # Use tracebuffer exported via sysctl SCTP_DETAILED_STR_STATS opt_sctp.h # Use per PR-SCTP policy stream stats # # # # Netgraph(4). Use option NETGRAPH to enable the base netgraph code. # Each netgraph node type can be either be compiled into the kernel # or loaded dynamically. To get the former, include the corresponding # option below. Each type has its own man page, e.g. ng_async(4). NETGRAPH NETGRAPH_DEBUG opt_netgraph.h NETGRAPH_ASYNC opt_netgraph.h NETGRAPH_BLUETOOTH opt_netgraph.h NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h NETGRAPH_BLUETOOTH_H4 opt_netgraph.h NETGRAPH_BLUETOOTH_HCI opt_netgraph.h NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h NETGRAPH_BLUETOOTH_UBT opt_netgraph.h NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h NETGRAPH_BPF opt_netgraph.h NETGRAPH_BRIDGE opt_netgraph.h NETGRAPH_CAR opt_netgraph.h NETGRAPH_CHECKSUM opt_netgraph.h NETGRAPH_CISCO opt_netgraph.h NETGRAPH_DEFLATE opt_netgraph.h NETGRAPH_DEVICE opt_netgraph.h NETGRAPH_ECHO opt_netgraph.h NETGRAPH_EIFACE opt_netgraph.h NETGRAPH_ETHER opt_netgraph.h NETGRAPH_ETHER_ECHO opt_netgraph.h NETGRAPH_FEC opt_netgraph.h NETGRAPH_FRAME_RELAY opt_netgraph.h NETGRAPH_GIF opt_netgraph.h NETGRAPH_GIF_DEMUX opt_netgraph.h NETGRAPH_HOLE opt_netgraph.h NETGRAPH_IFACE opt_netgraph.h NETGRAPH_IP_INPUT opt_netgraph.h NETGRAPH_IPFW opt_netgraph.h NETGRAPH_KSOCKET opt_netgraph.h NETGRAPH_L2TP opt_netgraph.h NETGRAPH_LMI opt_netgraph.h NETGRAPH_MPPC_COMPRESSION opt_netgraph.h NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h NETGRAPH_NAT opt_netgraph.h NETGRAPH_NETFLOW opt_netgraph.h NETGRAPH_ONE2MANY opt_netgraph.h NETGRAPH_PATCH opt_netgraph.h NETGRAPH_PIPE opt_netgraph.h NETGRAPH_PPP opt_netgraph.h NETGRAPH_PPPOE opt_netgraph.h NETGRAPH_PPTPGRE opt_netgraph.h NETGRAPH_PRED1 opt_netgraph.h NETGRAPH_RFC1490 opt_netgraph.h NETGRAPH_SOCKET opt_netgraph.h NETGRAPH_SPLIT opt_netgraph.h NETGRAPH_SPPP opt_netgraph.h NETGRAPH_TAG opt_netgraph.h NETGRAPH_TCPMSS opt_netgraph.h NETGRAPH_TEE opt_netgraph.h NETGRAPH_TTY opt_netgraph.h NETGRAPH_UI opt_netgraph.h NETGRAPH_VJC opt_netgraph.h NETGRAPH_VLAN opt_netgraph.h # DRM options DRM_DEBUG opt_drm.h TI_SF_BUF_JUMBO opt_ti.h TI_JUMBO_HDRSPLIT opt_ti.h # Misc debug flags. Most of these should probably be replaced with # 'DEBUG', and then let people recompile just the interesting modules # with 'make CC="cc -DDEBUG"'. DEBUG_1284 opt_ppb_1284.h LPT_DEBUG opt_lpt.h PLIP_DEBUG opt_plip.h LOCKF_DEBUG opt_debug_lockf.h SI_DEBUG opt_debug_si.h IFMEDIA_DEBUG opt_ifmedia.h # Fb options FB_DEBUG opt_fb.h # ppbus related options PERIPH_1284 opt_ppb_1284.h DONTPROBE_1284 opt_ppb_1284.h # smbus related options ENABLE_ALART opt_intpm.h # These cause changes all over the kernel BLKDEV_IOSIZE opt_global.h BURN_BRIDGES opt_global.h DEBUG opt_global.h DEBUG_LOCKS opt_global.h DEBUG_VFS_LOCKS opt_global.h DFLTPHYS opt_global.h DIAGNOSTIC opt_global.h INVARIANT_SUPPORT opt_global.h INVARIANTS opt_global.h KASSERT_PANIC_OPTIONAL opt_global.h MAXCPU opt_global.h MAXMEMDOM opt_global.h MAXPHYS opt_maxphys.h MCLSHIFT opt_global.h MUTEX_NOINLINE opt_global.h LOCK_PROFILING opt_global.h MSIZE opt_global.h REGRESSION opt_global.h RWLOCK_NOINLINE opt_global.h SX_NOINLINE opt_global.h VFS_BIO_DEBUG opt_global.h # These are VM related options VM_KMEM_SIZE opt_vm.h VM_KMEM_SIZE_SCALE opt_vm.h VM_KMEM_SIZE_MAX opt_vm.h VM_NRESERVLEVEL opt_vm.h VM_LEVEL_0_ORDER opt_vm.h MALLOC_MAKE_FAILURES opt_vm.h MALLOC_PROFILE opt_vm.h MALLOC_DEBUG_MAXZONES opt_vm.h # The MemGuard replacement allocator used for tamper-after-free detection DEBUG_MEMGUARD opt_vm.h # The RedZone malloc(9) protection DEBUG_REDZONE opt_vm.h # Standard SMP options EARLY_AP_STARTUP opt_global.h SMP opt_global.h NUMA opt_global.h # Size of the kernel message buffer MSGBUF_SIZE opt_msgbuf.h # NFS options NFS_MINATTRTIMO opt_nfs.h NFS_MAXATTRTIMO opt_nfs.h NFS_MINDIRATTRTIMO opt_nfs.h NFS_MAXDIRATTRTIMO opt_nfs.h NFS_DEBUG opt_nfs.h # TMPFS options TMPFS_PAGES_MINRESERVED opt_tmpfs.h # Options for uart(4) UART_PPS_ON_CTS opt_uart.h UART_POLL_FREQ opt_uart.h UART_DEV_TOLERANCE_PCT opt_uart.h # options for bus/device framework BUS_DEBUG opt_bus.h # options for USB support USB_DEBUG opt_usb.h USB_HOST_ALIGN opt_usb.h USB_REQ_DEBUG opt_usb.h USB_TEMPLATE opt_usb.h USB_VERBOSE opt_usb.h USB_DMA_SINGLE_ALLOC opt_usb.h USB_EHCI_BIG_ENDIAN_DESC opt_usb.h U3G_DEBUG opt_u3g.h UKBD_DFLT_KEYMAP opt_ukbd.h UPLCOM_INTR_INTERVAL opt_uplcom.h UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h UVSCOM_INTR_INTERVAL opt_uvscom.h # options for the Realtek rtwn driver RTWN_DEBUG opt_rtwn.h RTWN_WITHOUT_UCODE opt_rtwn.h # Embedded system options INIT_PATH ROOTDEVNAME FDC_DEBUG opt_fdc.h PCFCLOCK_VERBOSE opt_pcfclock.h PCFCLOCK_MAX_RETRIES opt_pcfclock.h KTR opt_global.h KTR_ALQ opt_ktr.h KTR_MASK opt_ktr.h KTR_CPUMASK opt_ktr.h KTR_COMPILE opt_global.h KTR_BOOT_ENTRIES opt_global.h KTR_ENTRIES opt_global.h KTR_VERBOSE opt_ktr.h WITNESS opt_global.h WITNESS_KDB opt_witness.h WITNESS_NO_VNODE opt_witness.h WITNESS_SKIPSPIN opt_witness.h WITNESS_COUNT opt_witness.h OPENSOLARIS_WITNESS opt_global.h EPOCH_TRACE opt_global.h # options for ACPI support ACPI_DEBUG opt_acpi.h ACPI_MAX_TASKS opt_acpi.h ACPI_MAX_THREADS opt_acpi.h DEV_ACPI opt_acpi.h ACPI_EARLY_EPYC_WAR opt_acpi.h # options for IOMMU support IOMMU opt_iommu.h # ISA support DEV_ISA opt_isa.h ISAPNP opt_dontuse.h # various 'device presence' options. DEV_BPF opt_bpf.h DEV_CARP opt_carp.h DEV_NETMAP opt_global.h DEV_PCI opt_pci.h DEV_PF opt_pf.h DEV_PFLOG opt_pf.h DEV_PFSYNC opt_pf.h DEV_SPLASH opt_splash.h DEV_VLAN opt_vlan.h # bce driver BCE_DEBUG opt_bce.h BCE_NVRAM_WRITE_SUPPORT opt_bce.h SOCKBUF_DEBUG opt_global.h # options for hifn driver HIFN_DEBUG opt_hifn.h HIFN_RNDTEST opt_hifn.h # options for safenet driver SAFE_DEBUG opt_safe.h SAFE_NO_RNG opt_safe.h SAFE_RNDTEST opt_safe.h # syscons/vt options MAXCONS opt_syscons.h SC_ALT_MOUSE_IMAGE opt_syscons.h SC_CUT_SPACES2TABS opt_syscons.h SC_CUT_SEPCHARS opt_syscons.h SC_DEBUG_LEVEL opt_syscons.h SC_DFLT_FONT opt_syscons.h SC_DFLT_TERM opt_syscons.h SC_DISABLE_KDBKEY opt_syscons.h SC_DISABLE_REBOOT opt_syscons.h SC_HISTORY_SIZE opt_syscons.h SC_KERNEL_CONS_ATTR opt_syscons.h SC_KERNEL_CONS_ATTRS opt_syscons.h SC_KERNEL_CONS_REV_ATTR opt_syscons.h SC_MOUSE_CHAR opt_syscons.h SC_NO_CUTPASTE opt_syscons.h SC_NO_FONT_LOADING opt_syscons.h SC_NO_HISTORY opt_syscons.h SC_NO_MODE_CHANGE opt_syscons.h SC_NO_SUSPEND_VTYSWITCH opt_syscons.h SC_NO_SYSMOUSE opt_syscons.h SC_NO_TERM_DUMB opt_syscons.h SC_NO_TERM_SC opt_syscons.h SC_NO_TERM_TEKEN opt_syscons.h SC_NORM_ATTR opt_syscons.h SC_NORM_REV_ATTR opt_syscons.h SC_PIXEL_MODE opt_syscons.h SC_RENDER_DEBUG opt_syscons.h SC_TWOBUTTON_MOUSE opt_syscons.h VT_ALT_TO_ESC_HACK opt_syscons.h VT_FB_MAX_WIDTH opt_syscons.h VT_FB_MAX_HEIGHT opt_syscons.h VT_MAXWINDOWS opt_syscons.h VT_TWOBUTTON_MOUSE opt_syscons.h DEV_SC opt_syscons.h DEV_VT opt_syscons.h # teken terminal emulator options TEKEN_CONS25 opt_teken.h TEKEN_UTF8 opt_teken.h TERMINAL_KERN_ATTR opt_teken.h TERMINAL_NORM_ATTR opt_teken.h # options for printf PRINTF_BUFR_SIZE opt_printf.h BOOT_TAG opt_printf.h BOOT_TAG_SZ opt_printf.h # kbd options KBD_DISABLE_KEYMAP_LOAD opt_kbd.h KBD_INSTALL_CDEV opt_kbd.h KBD_MAXRETRY opt_kbd.h KBD_MAXWAIT opt_kbd.h KBD_RESETDELAY opt_kbd.h KBD_DELAY1 opt_kbd.h KBD_DELAY2 opt_kbd.h KBDIO_DEBUG opt_kbd.h KBDMUX_DFLT_KEYMAP opt_kbdmux.h # options for the Atheros driver ATH_DEBUG opt_ath.h ATH_TXBUF opt_ath.h ATH_RXBUF opt_ath.h ATH_DIAGAPI opt_ath.h ATH_TX99_DIAG opt_ath.h ATH_ENABLE_DFS opt_ath.h ATH_EEPROM_FIRMWARE opt_ath.h ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h ATH_DEBUG_ALQ opt_ath.h ATH_KTR_INTR_DEBUG opt_ath.h AH_DEBUG opt_ah.h AH_ASSERT opt_ah.h AH_DEBUG_ALQ opt_ah.h AH_REGOPS_FUNC opt_ah.h AH_WRITE_REGDOMAIN opt_ah.h AH_DEBUG_COUNTRY opt_ah.h AH_WRITE_EEPROM opt_ah.h AH_PRIVATE_DIAG opt_ah.h AH_NEED_DESC_SWAP opt_ah.h AH_USE_INIPDGAIN opt_ah.h AH_MAXCHAN opt_ah.h AH_RXCFG_SDMAMW_4BYTES opt_ah.h AH_INTERRUPT_DEBUGGING opt_ah.h # AR5416 and later interrupt mitigation # XXX do not use this for AR9130 AH_AR5416_INTERRUPT_MITIGATION opt_ah.h # options for the Altera mSGDMA driver (altera_msgdma) ALTERA_MSGDMA_DESC_STD opt_altera_msgdma.h ALTERA_MSGDMA_DESC_EXT opt_altera_msgdma.h ALTERA_MSGDMA_DESC_PF_STD opt_altera_msgdma.h ALTERA_MSGDMA_DESC_PF_EXT opt_altera_msgdma.h # options for the Broadcom BCM43xx driver (bwi) BWI_DEBUG opt_bwi.h BWI_DEBUG_VERBOSE opt_bwi.h # options for the Brodacom BCM43xx driver (bwn) BWN_DEBUG opt_bwn.h BWN_GPL_PHY opt_bwn.h BWN_USE_SIBA opt_bwn.h # Options for the SIBA driver SIBA_DEBUG opt_siba.h # options for the Marvell 8335 wireless driver MALO_DEBUG opt_malo.h MALO_TXBUF opt_malo.h MALO_RXBUF opt_malo.h # options for the Marvell wireless driver MWL_DEBUG opt_mwl.h MWL_TXBUF opt_mwl.h MWL_RXBUF opt_mwl.h MWL_DIAGAPI opt_mwl.h MWL_AGGR_SIZE opt_mwl.h MWL_TX_NODROP opt_mwl.h # Options for the Marvell NETA driver MVNETA_MULTIQUEUE opt_mvneta.h MVNETA_KTR opt_mvneta.h # Options for the Intel 802.11ac wireless driver IWM_DEBUG opt_iwm.h # Options for the Intel 802.11n wireless driver IWN_DEBUG opt_iwn.h # Options for the Intel 3945ABG wireless driver WPI_DEBUG opt_wpi.h # dcons options DCONS_BUF_SIZE opt_dcons.h DCONS_POLL_HZ opt_dcons.h DCONS_FORCE_CONSOLE opt_dcons.h DCONS_FORCE_GDB opt_dcons.h # HWPMC options HWPMC_DEBUG opt_global.h HWPMC_HOOKS # 802.11 support layer IEEE80211_DEBUG opt_wlan.h IEEE80211_DEBUG_REFCNT opt_wlan.h IEEE80211_SUPPORT_MESH opt_wlan.h IEEE80211_SUPPORT_SUPERG opt_wlan.h IEEE80211_SUPPORT_TDMA opt_wlan.h IEEE80211_ALQ opt_wlan.h IEEE80211_DFS_DEBUG opt_wlan.h # 802.11 TDMA support TDMA_SLOTLEN_DEFAULT opt_tdma.h TDMA_SLOTCNT_DEFAULT opt_tdma.h TDMA_BINTVAL_DEFAULT opt_tdma.h TDMA_TXRATE_11B_DEFAULT opt_tdma.h TDMA_TXRATE_11G_DEFAULT opt_tdma.h TDMA_TXRATE_11A_DEFAULT opt_tdma.h TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h TDMA_TXRATE_HALF_DEFAULT opt_tdma.h TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h TDMA_TXRATE_11NA_DEFAULT opt_tdma.h TDMA_TXRATE_11NG_DEFAULT opt_tdma.h # VideoMode PICKMODE_DEBUG opt_videomode.h # Network stack virtualization options VIMAGE opt_global.h VNET_DEBUG opt_global.h # Common Flash Interface (CFI) options CFI_SUPPORT_STRATAFLASH opt_cfi.h CFI_ARMEDANDDANGEROUS opt_cfi.h CFI_HARDWAREBYTESWAP opt_cfi.h # Sound options SND_DEBUG opt_snd.h SND_DIAGNOSTIC opt_snd.h SND_FEEDER_MULTIFORMAT opt_snd.h SND_FEEDER_FULL_MULTIFORMAT opt_snd.h SND_FEEDER_RATE_HP opt_snd.h SND_PCM_64 opt_snd.h SND_OLDSTEREO opt_snd.h X86BIOS # Flattened device tree options FDT opt_platform.h FDT_DTB_STATIC opt_platform.h # OFED Infiniband stack OFED opt_ofed.h OFED_DEBUG_INIT opt_ofed.h SDP opt_ofed.h SDP_DEBUG opt_ofed.h IPOIB opt_ofed.h IPOIB_DEBUG opt_ofed.h IPOIB_CM opt_ofed.h # Resource Accounting RACCT opt_global.h RACCT_DEFAULT_TO_DISABLED opt_global.h # Resource Limits RCTL opt_global.h # HardenedBSD general hardening features HARDEN_KLD opt_pax.h # PaX-inspired hardening features PAX opt_pax.h PAX_ASLR opt_pax.h PAX_SYSCTLS opt_pax.h PAX_SEGVGUARD opt_pax.h PAX_HARDENING opt_pax.h PAX_HARDEN_KMALLOC opt_pax.h PAX_NOEXEC opt_pax.h PAX_INSECURE_MODE opt_pax.h PAX_CONTROL_ACL opt_pax.h PAX_CONTROL_ACL_OVERRIDE_SUPPORT opt_pax.h PAX_CONTROL_EXTATTR opt_pax.h PAX_JAIL_SUPPORT opt_pax.h HBSD_DEBUG opt_pax.h HBSD_RESIST_FINGERPRINTING opt_pax.h # ASLR overwritable defaults PAX_ASLR_DELTA_MMAP_DEF_LEN opt_pax.h PAX_ASLR_DELTA_STACK_DEF_LEN opt_pax.h PAX_ASLR_DELTA_VDSO_DEF_LEN opt_pax.h PAX_ASLR_DELTA_EXEC_DEF_LEN opt_pax.h PAX_ASLR_COMPAT_DELTA_MMAP_DEF_LEN opt_pax.h PAX_ASLR_COMPAT_DELTA_STACK_DEF_LEN opt_pax.h PAX_ASLR_COMPAT_DELTA_EXEC_DEF_LEN opt_pax.h PAX_ASLR_COMPAT_DELTA_VDSO_DEF_LEN opt_pax.h PAX_ASLR_DELTA_MMAP_LSB opt_pax.h PAX_ASLR_DELTA_STACK_LSB opt_pax.h PAX_ASLR_DELTA_STACK_WITH_GAP_LSB opt_pax.h PAX_ASLR_DELTA_EXEC_LSB opt_pax.h PAX_ASLR_DELTA_VDSO_LSB opt_pax.h # Random number generator(s) # Alternative RNG algorithm. RANDOM_FENESTRASX opt_global.h # With this, no entropy processor is loaded, but the entropy # harvesting infrastructure is present. This means an entropy # processor may be loaded as a module. RANDOM_LOADABLE opt_global.h # This turns on high-rate and potentially expensive harvesting in # the uma slab allocator. RANDOM_ENABLE_UMA opt_global.h RANDOM_ENABLE_ETHER opt_global.h # This options turns TPM into entropy source. TPM_HARVEST opt_tpm.h # BHND(4) driver BHND_LOGLEVEL opt_global.h # GPIO and child devices GPIO_SPI_DEBUG opt_gpio.h # SPI devices SPIGEN_LEGACY_CDEVNAME opt_spi.h # etherswitch(4) driver RTL8366_SOFT_RESET opt_etherswitch.h # evdev protocol support EVDEV_SUPPORT opt_evdev.h EVDEV_DEBUG opt_evdev.h UINPUT_DEBUG opt_evdev.h # Hyper-V network driver HN_DEBUG opt_hn.h # CAM-based MMC stack MMCCAM # Encrypted kernel crash dumps EKCD opt_ekcd.h # NVME options NVME_USE_NVD opt_nvme.h # amdsbwd options AMDSBWD_DEBUG opt_amdsbwd.h # gcov support GCOV opt_global.h LINDEBUGFS # options for HID support HID_DEBUG opt_hid.h IICHID_DEBUG opt_hid.h IICHID_SAMPLING opt_hid.h HKBD_DFLT_KEYMAP opt_hkbd.h HIDRAW_MAKE_UHID_ALIAS opt_hid.h # kenv options # The early kernel environment (loader environment, config(8)-provided static) # is typically cleared after the dynamic environment comes up to ensure that # we're not inadvertently holding on to 'secret' values in these stale envs. # This option is insecure except in controlled environments where the static # environment's contents are known to be safe. PRESERVE_EARLY_KENV opt_global.h