.\" Copyright (c) 1985, 1991, 1993, 1994
.\"	The Regents of the University of California.  All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\"    must display the following acknowledgement:
.\"	This product includes software developed by the University of
.\"	California, Berkeley and its contributors.
.\" 4. Neither the name of the University nor the names of its contributors
.\"    may be used to endorse or promote products derived from this software
.\"    without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\"     from: @(#)inetd.8	8.3 (Berkeley) 4/13/94
.\"	$Id: inetd.8,v 1.5 1995/10/09 23:34:07 davidg Exp $
.\"
.Dd April 13, 1994
.Dt INETD 8
.Os BSD 4.4
.Sh NAME
.Nm inetd
.Nd internet
.Dq super-server
.Sh SYNOPSIS
.Nm inetd
.Op Fl d
.Op Fl l
.Op Fl R Ar rate
.Op Ar configuration file
.Sh DESCRIPTION
The
.Nm inetd
program
should be run at boot time by
.Pa /etc/rc
(see
.Xr rc 8 ) .
It then listens for connections on certain
internet sockets.  When a connection is found on one
of its sockets, it decides what service the socket
corresponds to, and invokes a program to service the request.
The server program is invoked with the service socket
as its standard input, output and error descriptors.
After the program is
finished,
.Nm inetd
continues to listen on the socket (except in some cases which
will be described below).  Essentially,
.Nm inetd
allows running one daemon to invoke several others,
reducing load on the system.
.Pp
The options available for
.Nm inetd:
.Bl -tag -width Ds
.It Fl d
Turns on debugging.
.It Fl l
Turns on logging.
.It Fl R Ar rate
Specifies the maximum number of times a service can be invoked
in one minute; the default is 256.
.El
.Pp
Upon execution,
.Nm inetd
reads its configuration information from a configuration
file which, by default, is
.Pa /etc/inetd.conf .
There must be an entry for each field of the configuration
file, with entries for each field separated by a tab or
a space.  Comments are denoted by a ``#'' at the beginning
of a line.  There must be an entry for each field.  The
fields of the configuration file are as follows:
.Pp
.Bd -unfilled -offset indent -compact
service name
socket type
protocol
wait/nowait
user
server program
server program arguments
.Ed
.Pp
To specify a
.Em Sun-RPC
based service, the entry would contain these fields:
.Pp
.Bd -unfilled -offset indent -compact
service name/version
socket type
rpc/protocol
user
server program
server program arguments
.Ed
.Pp
There are two types of services that 
.Nm inetd
can start: standard and TCPMUX.
A standard service has a well-known port assigned to it;
it may be a service that implements an official Internet standard or is a
BSD-specific service.
As described in 
.Tn RFC 1078 ,
TCPMUX services are nonstandard services that do not have a 
well-known port assigned to them.
They are invoked from
.Nm inetd 
when a program connects to the
.Dq tcpmux
well-known port and specifies
the service name.  
This feature is useful for adding locally-developed servers.
.Pp
The
.Em service-name
entry is the name of a valid service in
the file
.Pa /etc/services .
For
.Dq internal
services (discussed below), the service
name
.Em must
be the official name of the service (that is, the first entry in
.Pa /etc/services ) .
When used to specify a
.Em Sun-RPC
based service, this field is a valid RPC service name in
the file
.Pa /etc/rpc . 
The part on the right of the 
.Dq /
is the RPC version number. This
can simply be a single numeric argument or a range of versions.
A range is bounded by the low version to the high version - 
.Dq rusers/1-3 .
For TCPMUX services, the value of the
.Em service-name
field consists of the string
.Dq tcpmux
followed by a slash and the
locally-chosen service name. 
The service names listed in 
.Pa /etc/services
and the name 
.Dq help
are reserved.
Try to choose unique names for your TCPMUX services by prefixing them with
your organization's name and suffixing them with a version number.
.Pp
The
.Em socket-type
should be one of
.Dq stream ,
.Dq dgram ,
.Dq raw ,
.Dq rdm ,
or
.Dq seqpacket ,
depending on whether the socket is a stream, datagram, raw,
reliably delivered message, or sequenced packet socket.
TCPMUX services must use 
.Dq stream .
.Pp
The
.Em protocol
must be a valid protocol as given in
.Pa /etc/protocols .
Examples might be
.Dq tcp
or
.Dq udp .
Rpc based services are specified with the 
.Dq rpc/tcp
or 
.Dq rpc/udp 
service type.
TCPMUX services must use 
.Dq tcp .
.Pp
The
.Em wait/nowait
entry specifies whether the server that is invoked by inetd will take over
the socket associated with the service access point, and thus whether
.Nm inetd
should wait for the server to exit before listening for new service
requests.
Datagram servers must use
.Dq wait ,
as they are always invoked with the original datagram socket bound
to the specified service address.
These servers must read at least one datagram from the socket
before exiting.
If a datagram server connects
to its peer, freeing the socket so
.Nm inetd
can received further messages on the socket, it is said to be
a
.Dq multi-threaded
server;
it should read one datagram from the socket and create a new socket
connected to the peer.
It should fork, and the parent should then exit
to allow
.Nm inetd
to check for new service requests to spawn new servers.
Datagram servers which process all incoming datagrams
on a socket and eventually time out are said to be
.Dq single-threaded .
.Xr Comsat 8 ,
.Pq Xr biff 1
and
.Xr talkd 8
are both examples of the latter type of
datagram server.
.Xr Tftpd 8
is an example of a multi-threaded datagram server.
.Pp
Servers using stream sockets generally are multi-threaded and
use the
.Dq nowait
entry.
Connection requests for these services are accepted by
.Nm inetd ,
and the server is given only the newly-accepted socket connected
to a client of the service.
Most stream-based services operate in this manner.
Stream-based servers that use
.Dq wait
are started with the listening service socket, and must accept
at least one connection request before exiting.
Such a server would normally accept and process incoming connection
requests until a timeout.
TCPMUX services must use 
.Dq nowait .
.Pp
The
.Em user
entry should contain the user name of the user as whom the server
should run.  This allows for servers to be given less permission
than root.
.Pp
The
.Em server-program
entry should contain the pathname of the program which is to be
executed by
.Nm inetd
when a request is found on its socket.  If
.Nm inetd
provides this service internally, this entry should
be
.Dq internal .
.Pp
The
.Em server program arguments
should be just as arguments
normally are, starting with argv[0], which is the name of
the program.  If the service is provided internally, the
word
.Dq internal
should take the place of this entry.
.Pp
The
.Nm inetd
program
provides several
.Dq trivial
services internally by use of
routines within itself.  These services are
.Dq echo ,
.Dq discard ,
.Dq chargen
(character generator),
.Dq daytime
(human readable time), and
.Dq time
(machine readable time, in the form of the number of seconds since
midnight, January 1, 1900).  All of these services are available in
both TCP and UDP versions; the UDP versions will refuse service if the
request specifies a reply port corresponding to any internal service.
(This is done as a defense against looping attacks; the remote IP address
is logged.)
For details of these services, consult the
appropriate
.Tn RFC
document.
.Pp
When given the
.Fl l
option
.Nm Inetd
will log an entry to syslog each time an 
.Xr accept 2 
is made, which notes the
service selected and the IP-number of the remote requestor.
.Pp
The
.Nm inetd
program
rereads its configuration file when it receives a hangup signal,
.Dv SIGHUP .
Services may be added, deleted or modified when the configuration file
is reread.
Except when started in debugging mode,
.Nm
records its process ID in the file
.Pa /var/run/inetd.pid
to assist in reconfiguration.
.Sh TCPMUX
.Pp
.Tn RFC 1078 
describes the TCPMUX protocol:
``A TCP client connects to a foreign host on TCP port 1.  It sends the
service name followed by a carriage-return line-feed <CRLF>.  The
service name is never case sensitive.  The server replies with a
single character indicating positive (+) or negative (\-)
acknowledgment, immediately followed by an optional message of
explanation, terminated with a <CRLF>.  If the reply was positive,
the selected protocol begins; otherwise the connection is closed.''
The program is passed the TCP connection as file descriptors 0 and 1.
.Pp
If the TCPMUX service name begins with a ``+'',
.Nm inetd
returns the positive reply for the program.
This allows you to invoke programs that use stdin/stdout
without putting any special server code in them.
.Pp
The special service name
.Dq help
causes
.Nm inetd
to list TCPMUX services in
.Pa inetd.conf .
.Sh "FILES"
.Bl -tag -width /var/run/inetd.pid -compact
.It Pa /etc/inetd.conf
configuration file.
.It Pa /etc/rpc
translation of service names to RPC program numbers.
.It Pa /etc/services
translation of service names to port numbers.
.It Pa /var/run/inetd.pid
the pid of the currently running
.Nm inetd .
.El
.Sh "EXAMPLES"
.Pp
Here are several example service entries for the various types of services:
.Bd -literal
ftp          stream  tcp   nowait root  /usr/libexec/ftpd        ftpd -l
ntalk        dgram   udp   wait   root  /usr/libexec/ntalkd      ntalkd
tcpmux/+date stream  tcp   nowait guest /bin/date                date
tcpmux/phonebook stream tcp nowait guest /usr/local/bin/phonebook phonebook
rstatd/1-3   dgram   rpc/udp wait root  /usr/libexec/rpc.rstatd  rpc.rstatd
.Ed
.Sh "ERROR MESSAGES"
The
.Nm inetd
server
logs error messages using
.Xr syslog 3 .
Important error messages and their explanations are:
.Bd -literal
\fIservice\fP/\fIprotocol\fP server failing (looping), service terminated.
.Ed
The number of requests for the specified service in the past minute
exceeded the limit. The limit exists to prevent a broken program
or a malicious user from swamping the system.
This message may occur for several reasons:
1) there are lots of hosts requesting the service within a short time period,
2) a 'broken' client program is requesting the service too frequently,
3) a malicious user is running a program to invoke the service in
a 'denial of service' attack, or
4) the invoked service program has an error that causes clients
to retry quickly.
Use the
.Op Fl R 
option,
as described above, to change the rate limit.
Once the limit is reached, the service will be
reenabled automatically in 10 minutes.
.sp
.Bd -literal
\fIservice\fP/\fIprotocol\fP: No such user '\fIuser\fP', service ignored
\fIservice\fP/\fIprotocol\fP: getpwnam: \fIuser\fP: No such user
.Ed
No entry for 
.Em user
exists in the 
.Pa passwd
file. The first message
occurs when
.Nm inetd
(re)reads the configuration file. The second message occurs when the
service is invoked.
.sp
.Bd -literal
\fIservice\fP: can't set uid \fInumber\fP
\fIservice\fP: can't set gid \fInumber\fP
.Ed
The user or group ID for the entry's 
.Em user
is invalid.
.Sh SEE ALSO
.Xr rpc 5 ,
.Xr services 5 ,
.Xr comsat 8 ,
.Xr fingerd 8 ,
.Xr ftpd 8 ,
.Xr rexecd 8 ,
.Xr rlogind 8 ,
.Xr rshd 8 ,
.Xr telnetd 8 ,
.Xr tftpd 8 ,
.Xr portmap 8 ,
.Xr rpc 5
.Sh HISTORY
The
.Nm
command appeared in
.Bx 4.3 .
TCPMUX is based on code and documentation by Mark Lottor.
Support for
.Tn "ONC RPC"
based services is modelled after that
provided by
.Tn SunOS
4.1.