HardenedBSD/sys/dev/wpi/if_wpi_debug.h
Warner Losh 95ee2897e9 sys: Remove $FreeBSD$: two-line .h pattern
Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/
2023-08-16 11:54:11 -06:00

143 lines
4.3 KiB
C

/*-
* Copyright (c) 2006,2007
* Damien Bergamini <damien.bergamini@free.fr>
* Benjamin Close <Benjamin.Close@clearchain.com>
* Copyright (c) 2015 Andriy Voskoboinyk <avos@FreeBSD.org>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef __IF_WPI_DEBUG_H__
#define __IF_WPI_DEBUG_H__
#ifdef WPI_DEBUG
enum {
WPI_DEBUG_XMIT = 0x00000001, /* basic xmit operation */
WPI_DEBUG_RECV = 0x00000002, /* basic recv operation */
WPI_DEBUG_STATE = 0x00000004, /* 802.11 state transitions */
WPI_DEBUG_HW = 0x00000008, /* Stage 1 (eeprom) debugging */
WPI_DEBUG_RESET = 0x00000010, /* reset processing */
WPI_DEBUG_FIRMWARE = 0x00000020, /* firmware(9) loading debug */
WPI_DEBUG_BEACON = 0x00000040, /* beacon handling */
WPI_DEBUG_WATCHDOG = 0x00000080, /* watchdog timeout */
WPI_DEBUG_INTR = 0x00000100, /* ISR */
WPI_DEBUG_SCAN = 0x00000200, /* Scan related operations */
WPI_DEBUG_NOTIFY = 0x00000400, /* State 2 Notif intr debug */
WPI_DEBUG_TEMP = 0x00000800, /* TXPower/Temp Calibration */
WPI_DEBUG_CMD = 0x00001000, /* cmd submission */
WPI_DEBUG_TRACE = 0x00002000, /* Print begin and start driver function */
WPI_DEBUG_PWRSAVE = 0x00004000, /* Power save operations */
WPI_DEBUG_EEPROM = 0x00008000, /* EEPROM info */
WPI_DEBUG_NODE = 0x00010000, /* node addition/removal */
WPI_DEBUG_KEY = 0x00020000, /* node key management */
WPI_DEBUG_EDCA = 0x00040000, /* WME info */
WPI_DEBUG_REGISTER = 0x00080000, /* print chipset register */
WPI_DEBUG_BMISS = 0x00100000, /* print number of missed beacons */
WPI_DEBUG_ANY = 0xffffffff
};
#define DPRINTF(sc, m, ...) do { \
if (sc->sc_debug & (m)) \
printf(__VA_ARGS__); \
} while (0)
#define TRACE_STR_BEGIN "->%s: begin\n"
#define TRACE_STR_DOING "->Doing %s\n"
#define TRACE_STR_END "->%s: end\n"
#define TRACE_STR_END_ERR "->%s: end in error\n"
#define WPI_DESC(x) case x: return #x
static const char *wpi_cmd_str(int cmd)
{
switch (cmd) {
/* Notifications. */
WPI_DESC(WPI_UC_READY);
WPI_DESC(WPI_RX_DONE);
WPI_DESC(WPI_START_SCAN);
WPI_DESC(WPI_SCAN_RESULTS);
WPI_DESC(WPI_STOP_SCAN);
WPI_DESC(WPI_BEACON_SENT);
WPI_DESC(WPI_RX_STATISTICS);
WPI_DESC(WPI_BEACON_STATISTICS);
WPI_DESC(WPI_STATE_CHANGED);
WPI_DESC(WPI_BEACON_MISSED);
/* Command notifications. */
WPI_DESC(WPI_CMD_RXON);
WPI_DESC(WPI_CMD_RXON_ASSOC);
WPI_DESC(WPI_CMD_EDCA_PARAMS);
WPI_DESC(WPI_CMD_TIMING);
WPI_DESC(WPI_CMD_ADD_NODE);
WPI_DESC(WPI_CMD_DEL_NODE);
WPI_DESC(WPI_CMD_TX_DATA);
WPI_DESC(WPI_CMD_MRR_SETUP);
WPI_DESC(WPI_CMD_SET_LED);
WPI_DESC(WPI_CMD_SET_POWER_MODE);
WPI_DESC(WPI_CMD_SCAN);
WPI_DESC(WPI_CMD_SCAN_ABORT);
WPI_DESC(WPI_CMD_SET_BEACON);
WPI_DESC(WPI_CMD_TXPOWER);
WPI_DESC(WPI_CMD_BT_COEX);
default:
return "UNKNOWN CMD";
}
}
/*
* Translate CSR code to string
*/
static const char *wpi_get_csr_string(size_t csr)
{
switch (csr) {
WPI_DESC(WPI_HW_IF_CONFIG);
WPI_DESC(WPI_INT);
WPI_DESC(WPI_INT_MASK);
WPI_DESC(WPI_FH_INT);
WPI_DESC(WPI_GPIO_IN);
WPI_DESC(WPI_RESET);
WPI_DESC(WPI_GP_CNTRL);
WPI_DESC(WPI_EEPROM);
WPI_DESC(WPI_EEPROM_GP);
WPI_DESC(WPI_GIO);
WPI_DESC(WPI_UCODE_GP1);
WPI_DESC(WPI_UCODE_GP2);
WPI_DESC(WPI_GIO_CHICKEN);
WPI_DESC(WPI_ANA_PLL);
WPI_DESC(WPI_DBG_HPET_MEM);
default:
KASSERT(0, ("Unknown CSR: %d\n", csr));
return "UNKNOWN CSR";
}
}
static const char *wpi_get_prph_string(size_t prph)
{
switch (prph) {
WPI_DESC(WPI_APMG_CLK_CTRL);
WPI_DESC(WPI_APMG_PS);
WPI_DESC(WPI_APMG_PCI_STT);
WPI_DESC(WPI_APMG_RFKILL);
default:
KASSERT(0, ("Unknown register: %d\n", prph));
return "UNKNOWN PRPH";
}
}
#else
#define DPRINTF(sc, m, ...) do { (void) sc; } while (0)
#endif
#endif /* __IF_WPI_DEBUG_H__ */