HardenedBSD/usr.sbin/ppp/vars.h
Atsushi Murai a9c6b5df9c 1. Add a settable redial timer and logging of the process id in a file.
A settable redial timer helps to avoid the problem where both ends
   of a link want to dial at the same time and the line winds up busy
   for both ends. The process id is logged in /var/run/PPP.system where
   system is the name of the called system.  When both ends of a link
   are running in demand dial mode, you need an easy way to get the pid
   of the ppp on the called end so it can be killed and re-started with
   -direct or pppd started to handle the incoming ppp session.

2. Add secret description for "set timeout" to man.

Reviewed by:	Atsushi Murai <amurai@spec.co.jp>
Submitted by:	John Capo <jc@irbs.com>
1995-10-08 14:57:32 +00:00

105 lines
3.3 KiB
C

/*
* Written by Toshiharu OHNO (tony-o@iij.ad.jp)
*
* Copyright (C) 1993, Internet Initiative Japan, Inc. All rights reserverd.
*
* Redistribution and use in source and binary forms are permitted
* provided that the above copyright notice and this paragraph are
* duplicated in all such forms and that any documentation,
* advertising materials, and other materials related to such
* distribution and use acknowledge that the software was developed
* by the Internet Initiative Japan. The name of the
* IIJ may not be used to endorse or promote products derived
* from this software without specific prior written permission.
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
* WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*
* $Id: vars.h,v 1.3 1995/03/11 15:18:55 amurai Exp $
*
* TODO:
*/
#ifndef _VARS_H_
#define _VARS_H_
#include <sys/param.h>
struct confdesc {
char *name;
int myside, hisside;
};
#define CONF_DISABLE 0
#define CONF_ENABLE 1
#define CONF_DENY 0
#define CONF_ACCEPT 1
#define ConfVjcomp 0
#define ConfLqr 1
#define ConfChap 2
#define ConfPap 3
#define ConfAcfcomp 4
#define ConfProtocomp 5
#define ConfPred1 6
#define ConfProxy 7
#define MAXCONFS 8
#define Enabled(x) (pppConfs[x].myside & CONF_ENABLE)
#define Acceptable(x) (pppConfs[x].hisside & CONF_ACCEPT)
extern struct confdesc pppConfs[MAXCONFS+1];
struct pppvars {
u_long var_mru; /* Initial MRU value */
int var_accmap; /* Initial ACCMAP value */
int modem_speed; /* Current modem speed */
int modem_parity; /* Parity setting */
int idle_timeout; /* Idle timeout value */
int lqr_timeout; /* LQR timeout value */
int retry_timeout; /* Retry timeout value */
int redial_timeout; /* Redial timeout value */
int dial_tries; /* Dial attempts before giving up, 0 == forever */
char modem_dev[20]; /* Name of device */
int open_mode; /* LCP open mode */
#define LOCAL_AUTH 0x01
#define LOCAL_NO_AUTH 0x02
u_char lauth; /* Local Authorized status */
#define DIALUP_REQ 0x01
#define DIALUP_DONE 0x02
char dial_script[200]; /* Dial script */
char login_script[200]; /* Login script */
char auth_key[50]; /* PAP/CHAP key */
char auth_name[50]; /* PAP/CHAP system name */
char phone_number[50]; /* Telephone Number */
char shostname[MAXHOSTNAMELEN];/* Local short Host Name */
};
#define VarAccmap pppVars.var_accmap
#define VarMRU pppVars.var_mru
#define VarDevice pppVars.modem_dev
#define VarSpeed pppVars.modem_speed
#define VarParity pppVars.modem_parity
#define VarOpenMode pppVars.open_mode
#define VarLocalAuth pppVars.lauth
#define VarDialScript pppVars.dial_script
#define VarLoginScript pppVars.login_script
#define VarIdleTimeout pppVars.idle_timeout
#define VarLqrTimeout pppVars.lqr_timeout
#define VarRetryTimeout pppVars.retry_timeout
#define VarAuthKey pppVars.auth_key
#define VarAuthName pppVars.auth_name
#define VarPhone pppVars.phone_number
#define VarShortHost pppVars.shostname
#define VarRedialTimeout pppVars.redial_timeout
#define VarDialTries pppVars.dial_tries
#define DEV_IS_SYNC (VarSpeed == 0)
extern struct pppvars pppVars;
int ipInOctets, ipOutOctets, ipKeepAlive;
int ipConnectSecs, ipIdleSecs;
#endif