mirror of
https://git.hardenedbsd.org/hardenedbsd/HardenedBSD.git
synced 2024-12-20 15:26:43 +01:00
32 lines
1.2 KiB
Plaintext
32 lines
1.2 KiB
Plaintext
# $FreeBSD$
|
|
# $OpenBSD: ackpri,v 1.3 2006/10/07 04:48:01 mcbride Exp $
|
|
|
|
# Use a simple priority queue to prioritize empty (no payload) TCP ACKs,
|
|
# which dramatically improves throughput on (asymmetric) links when the
|
|
# reverse direction is saturated. The empty ACKs use an insignificant
|
|
# part of the bandwidth, but if they get delayed, downloads suffer
|
|
# badly, so prioritize them.
|
|
|
|
# Example: 512/128 kbps ADSL. Download is 50 kB/s. When a concurrent
|
|
# upload saturates the uplink, download drops to 7 kB/s. With the
|
|
# priority queue below, download drops only to 48 kB/s.
|
|
|
|
# Replace lo0 with your real external interface
|
|
|
|
ext_if="lo0"
|
|
|
|
# For a 512/128 kbps ADSL with PPPoE link, using "bandwidth 100Kb"
|
|
# is optimal. Some experimentation might be needed to find the best
|
|
# value. If it's set too high, the priority queue is not effective, and
|
|
# if it's set too low, the available bandwidth is not fully used.
|
|
# A good starting point would be real_uplink_bandwidth * 90 / 100.
|
|
|
|
altq on $ext_if priq bandwidth 100Kb queue { q_pri, q_def }
|
|
queue q_pri priority 7
|
|
queue q_def priority 1 priq(default)
|
|
|
|
pass out on $ext_if proto tcp from $ext_if to any queue (q_def, q_pri)
|
|
|
|
pass in on $ext_if proto tcp from any to $ext_if queue (q_def, q_pri)
|
|
|