Justin T. Gibbs a515c85818 Fix the abort code in the BUS DEVICE RESET case. Needed to set cmdlen to 0. ... Ensure that queued commands are not touched by the abort code by setting the SCB status to indicate what queue it is in. Fix deadlocks when using SCB paging by using SCBs from the assigned_scbs queue or an SCB that completed during the same interrupt if needed. Don't ever use insl to pull SCBs from any of the controllers. You can only do 8bit PIO reads. This only affected SCB paging. With this checkin, SCB paging works quite a bit better, but I still have some problems with it that may be caused by a firmware problem in my PD1800s. It seems that using a tag number higher than the maximum number of tags allowed by the device, confuses it. For example, if I queue two commands, tagged 3 and 36, it never reconnects for tag 36.		1996-04-28 19:21:20 +00:00
..
apm
bios
boot
conf	Make install' depend on kernel'. Some idiot tried to install a	1996-04-27 07:30:49 +00:00
eisa
i386	Fix some bugs I introduced and some old ones as well.	1996-04-28 07:14:05 +00:00
ibcs2
include
isa
linux
pci
scsi	Fix the abort code in the BUS DEVICE RESET case. Needed to set cmdlen to 0.	1996-04-28 19:21:20 +00:00
Makefile