mirror of
https://git.hardenedbsd.org/hardenedbsd/HardenedBSD.git
synced 2024-11-15 06:42:51 +01:00
b499ab877f
Add missing model numbers M20h (Dali, Zen1), M60H (Renoir, Zen2), and M90H (Van Gogh, Zen2). Submitted by: Greg V <greg AT unrelenting.technology>
851 lines
23 KiB
C
851 lines
23 KiB
C
/*-
|
|
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
|
|
*
|
|
* Copyright (c) 2008, 2009 Rui Paulo <rpaulo@FreeBSD.org>
|
|
* Copyright (c) 2009 Norikatsu Shigemura <nork@FreeBSD.org>
|
|
* Copyright (c) 2009-2012 Jung-uk Kim <jkim@FreeBSD.org>
|
|
* All rights reserved.
|
|
* Copyright (c) 2017-2020 Conrad Meyer <cem@FreeBSD.org>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
|
|
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Driver for the AMD CPU on-die thermal sensors.
|
|
* Initially based on the k8temp Linux driver.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/module.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/systm.h>
|
|
|
|
#include <machine/cpufunc.h>
|
|
#include <machine/md_var.h>
|
|
#include <machine/specialreg.h>
|
|
|
|
#include <dev/pci/pcivar.h>
|
|
#include <x86/pci_cfgreg.h>
|
|
|
|
#include <dev/amdsmn/amdsmn.h>
|
|
|
|
typedef enum {
|
|
CORE0_SENSOR0,
|
|
CORE0_SENSOR1,
|
|
CORE1_SENSOR0,
|
|
CORE1_SENSOR1,
|
|
CORE0,
|
|
CORE1,
|
|
CCD1,
|
|
CCD_BASE = CCD1,
|
|
CCD2,
|
|
CCD3,
|
|
CCD4,
|
|
CCD5,
|
|
CCD6,
|
|
CCD7,
|
|
CCD8,
|
|
CCD_MAX = CCD8,
|
|
NUM_CCDS = CCD_MAX - CCD_BASE + 1,
|
|
} amdsensor_t;
|
|
|
|
struct amdtemp_softc {
|
|
int sc_ncores;
|
|
int sc_ntemps;
|
|
int sc_flags;
|
|
#define AMDTEMP_FLAG_CS_SWAP 0x01 /* ThermSenseCoreSel is inverted. */
|
|
#define AMDTEMP_FLAG_CT_10BIT 0x02 /* CurTmp is 10-bit wide. */
|
|
#define AMDTEMP_FLAG_ALT_OFFSET 0x04 /* CurTmp starts at -28C. */
|
|
int32_t sc_offset;
|
|
int32_t (*sc_gettemp)(device_t, amdsensor_t);
|
|
struct sysctl_oid *sc_sysctl_cpu[MAXCPU];
|
|
struct intr_config_hook sc_ich;
|
|
device_t sc_smn;
|
|
};
|
|
|
|
/*
|
|
* N.B. The numbers in macro names below are significant and represent CPU
|
|
* family and model numbers. Do not make up fictitious family or model numbers
|
|
* when adding support for new devices.
|
|
*/
|
|
#define VENDORID_AMD 0x1022
|
|
#define DEVICEID_AMD_MISC0F 0x1103
|
|
#define DEVICEID_AMD_MISC10 0x1203
|
|
#define DEVICEID_AMD_MISC11 0x1303
|
|
#define DEVICEID_AMD_MISC14 0x1703
|
|
#define DEVICEID_AMD_MISC15 0x1603
|
|
#define DEVICEID_AMD_MISC15_M10H 0x1403
|
|
#define DEVICEID_AMD_MISC15_M30H 0x141d
|
|
#define DEVICEID_AMD_MISC15_M60H_ROOT 0x1576
|
|
#define DEVICEID_AMD_MISC16 0x1533
|
|
#define DEVICEID_AMD_MISC16_M30H 0x1583
|
|
#define DEVICEID_AMD_HOSTB17H_ROOT 0x1450
|
|
#define DEVICEID_AMD_HOSTB17H_M10H_ROOT 0x15d0
|
|
#define DEVICEID_AMD_HOSTB17H_M30H_ROOT 0x1480 /* Also M70H, F19H M00H/M20H */
|
|
#define DEVICEID_AMD_HOSTB17H_M60H_ROOT 0x1630
|
|
|
|
static const struct amdtemp_product {
|
|
uint16_t amdtemp_vendorid;
|
|
uint16_t amdtemp_deviceid;
|
|
/*
|
|
* 0xFC register is only valid on the D18F3 PCI device; SMN temp
|
|
* drivers do not attach to that device.
|
|
*/
|
|
bool amdtemp_has_cpuid;
|
|
} amdtemp_products[] = {
|
|
{ VENDORID_AMD, DEVICEID_AMD_MISC0F, true },
|
|
{ VENDORID_AMD, DEVICEID_AMD_MISC10, true },
|
|
{ VENDORID_AMD, DEVICEID_AMD_MISC11, true },
|
|
{ VENDORID_AMD, DEVICEID_AMD_MISC14, true },
|
|
{ VENDORID_AMD, DEVICEID_AMD_MISC15, true },
|
|
{ VENDORID_AMD, DEVICEID_AMD_MISC15_M10H, true },
|
|
{ VENDORID_AMD, DEVICEID_AMD_MISC15_M30H, true },
|
|
{ VENDORID_AMD, DEVICEID_AMD_MISC15_M60H_ROOT, false },
|
|
{ VENDORID_AMD, DEVICEID_AMD_MISC16, true },
|
|
{ VENDORID_AMD, DEVICEID_AMD_MISC16_M30H, true },
|
|
{ VENDORID_AMD, DEVICEID_AMD_HOSTB17H_ROOT, false },
|
|
{ VENDORID_AMD, DEVICEID_AMD_HOSTB17H_M10H_ROOT, false },
|
|
{ VENDORID_AMD, DEVICEID_AMD_HOSTB17H_M30H_ROOT, false },
|
|
{ VENDORID_AMD, DEVICEID_AMD_HOSTB17H_M60H_ROOT, false },
|
|
};
|
|
|
|
/*
|
|
* Reported Temperature Control Register, family 0Fh-15h (some models), 16h.
|
|
*/
|
|
#define AMDTEMP_REPTMP_CTRL 0xa4
|
|
|
|
#define AMDTEMP_REPTMP10H_CURTMP_MASK 0x7ff
|
|
#define AMDTEMP_REPTMP10H_CURTMP_SHIFT 21
|
|
#define AMDTEMP_REPTMP10H_TJSEL_MASK 0x3
|
|
#define AMDTEMP_REPTMP10H_TJSEL_SHIFT 16
|
|
|
|
/*
|
|
* Reported Temperature, Family 15h, M60+
|
|
*
|
|
* Same register bit definitions as other Family 15h CPUs, but access is
|
|
* indirect via SMN, like Family 17h.
|
|
*/
|
|
#define AMDTEMP_15H_M60H_REPTMP_CTRL 0xd8200ca4
|
|
|
|
/*
|
|
* Reported Temperature, Family 17h
|
|
*
|
|
* According to AMD OSRR for 17H, section 4.2.1, bits 31-21 of this register
|
|
* provide the current temp. bit 19, when clear, means the temp is reported in
|
|
* a range 0.."225C" (probable typo for 255C), and when set changes the range
|
|
* to -49..206C.
|
|
*/
|
|
#define AMDTEMP_17H_CUR_TMP 0x59800
|
|
#define AMDTEMP_17H_CUR_TMP_RANGE_SEL (1u << 19)
|
|
/*
|
|
* The following register set was discovered experimentally by Ondrej Čerman
|
|
* and collaborators, but is not (yet) documented in a PPR/OSRR (other than
|
|
* the M70H PPR SMN memory map showing [0x59800, +0x314] as allocated to
|
|
* SMU::THM). It seems plausible and the Linux sensor folks have adopted it.
|
|
*/
|
|
#define AMDTEMP_17H_CCD_TMP_BASE 0x59954
|
|
#define AMDTEMP_17H_CCD_TMP_VALID (1u << 11)
|
|
|
|
/*
|
|
* AMD temperature range adjustment, in deciKelvins (i.e., 49.0 Celsius).
|
|
*/
|
|
#define AMDTEMP_CURTMP_RANGE_ADJUST 490
|
|
|
|
/*
|
|
* Thermaltrip Status Register (Family 0Fh only)
|
|
*/
|
|
#define AMDTEMP_THERMTP_STAT 0xe4
|
|
#define AMDTEMP_TTSR_SELCORE 0x04
|
|
#define AMDTEMP_TTSR_SELSENSOR 0x40
|
|
|
|
/*
|
|
* DRAM Configuration High Register
|
|
*/
|
|
#define AMDTEMP_DRAM_CONF_HIGH 0x94 /* Function 2 */
|
|
#define AMDTEMP_DRAM_MODE_DDR3 0x0100
|
|
|
|
/*
|
|
* CPU Family/Model Register
|
|
*/
|
|
#define AMDTEMP_CPUID 0xfc
|
|
|
|
/*
|
|
* Device methods.
|
|
*/
|
|
static void amdtemp_identify(driver_t *driver, device_t parent);
|
|
static int amdtemp_probe(device_t dev);
|
|
static int amdtemp_attach(device_t dev);
|
|
static void amdtemp_intrhook(void *arg);
|
|
static int amdtemp_detach(device_t dev);
|
|
static int32_t amdtemp_gettemp0f(device_t dev, amdsensor_t sensor);
|
|
static int32_t amdtemp_gettemp(device_t dev, amdsensor_t sensor);
|
|
static int32_t amdtemp_gettemp15hm60h(device_t dev, amdsensor_t sensor);
|
|
static int32_t amdtemp_gettemp17h(device_t dev, amdsensor_t sensor);
|
|
static void amdtemp_probe_ccd_sensors17h(device_t dev, uint32_t model);
|
|
static void amdtemp_probe_ccd_sensors19h(device_t dev, uint32_t model);
|
|
static int amdtemp_sysctl(SYSCTL_HANDLER_ARGS);
|
|
|
|
static device_method_t amdtemp_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_identify, amdtemp_identify),
|
|
DEVMETHOD(device_probe, amdtemp_probe),
|
|
DEVMETHOD(device_attach, amdtemp_attach),
|
|
DEVMETHOD(device_detach, amdtemp_detach),
|
|
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
static driver_t amdtemp_driver = {
|
|
"amdtemp",
|
|
amdtemp_methods,
|
|
sizeof(struct amdtemp_softc),
|
|
};
|
|
|
|
static devclass_t amdtemp_devclass;
|
|
DRIVER_MODULE(amdtemp, hostb, amdtemp_driver, amdtemp_devclass, NULL, NULL);
|
|
MODULE_VERSION(amdtemp, 1);
|
|
MODULE_DEPEND(amdtemp, amdsmn, 1, 1, 1);
|
|
MODULE_PNP_INFO("U16:vendor;U16:device", pci, amdtemp, amdtemp_products,
|
|
nitems(amdtemp_products));
|
|
|
|
static bool
|
|
amdtemp_match(device_t dev, const struct amdtemp_product **product_out)
|
|
{
|
|
int i;
|
|
uint16_t vendor, devid;
|
|
|
|
vendor = pci_get_vendor(dev);
|
|
devid = pci_get_device(dev);
|
|
|
|
for (i = 0; i < nitems(amdtemp_products); i++) {
|
|
if (vendor == amdtemp_products[i].amdtemp_vendorid &&
|
|
devid == amdtemp_products[i].amdtemp_deviceid) {
|
|
if (product_out != NULL)
|
|
*product_out = &amdtemp_products[i];
|
|
return (true);
|
|
}
|
|
}
|
|
return (false);
|
|
}
|
|
|
|
static void
|
|
amdtemp_identify(driver_t *driver, device_t parent)
|
|
{
|
|
device_t child;
|
|
|
|
/* Make sure we're not being doubly invoked. */
|
|
if (device_find_child(parent, "amdtemp", -1) != NULL)
|
|
return;
|
|
|
|
if (amdtemp_match(parent, NULL)) {
|
|
child = device_add_child(parent, "amdtemp", -1);
|
|
if (child == NULL)
|
|
device_printf(parent, "add amdtemp child failed\n");
|
|
}
|
|
}
|
|
|
|
static int
|
|
amdtemp_probe(device_t dev)
|
|
{
|
|
uint32_t family, model;
|
|
|
|
if (resource_disabled("amdtemp", 0))
|
|
return (ENXIO);
|
|
if (!amdtemp_match(device_get_parent(dev), NULL))
|
|
return (ENXIO);
|
|
|
|
family = CPUID_TO_FAMILY(cpu_id);
|
|
model = CPUID_TO_MODEL(cpu_id);
|
|
|
|
switch (family) {
|
|
case 0x0f:
|
|
if ((model == 0x04 && (cpu_id & CPUID_STEPPING) == 0) ||
|
|
(model == 0x05 && (cpu_id & CPUID_STEPPING) <= 1))
|
|
return (ENXIO);
|
|
break;
|
|
case 0x10:
|
|
case 0x11:
|
|
case 0x12:
|
|
case 0x14:
|
|
case 0x15:
|
|
case 0x16:
|
|
case 0x17:
|
|
case 0x19:
|
|
break;
|
|
default:
|
|
return (ENXIO);
|
|
}
|
|
device_set_desc(dev, "AMD CPU On-Die Thermal Sensors");
|
|
|
|
return (BUS_PROBE_GENERIC);
|
|
}
|
|
|
|
static int
|
|
amdtemp_attach(device_t dev)
|
|
{
|
|
char tn[32];
|
|
u_int regs[4];
|
|
const struct amdtemp_product *product;
|
|
struct amdtemp_softc *sc;
|
|
struct sysctl_ctx_list *sysctlctx;
|
|
struct sysctl_oid *sysctlnode;
|
|
uint32_t cpuid, family, model;
|
|
u_int bid;
|
|
int erratum319, unit;
|
|
bool needsmn;
|
|
|
|
sc = device_get_softc(dev);
|
|
erratum319 = 0;
|
|
needsmn = false;
|
|
|
|
if (!amdtemp_match(device_get_parent(dev), &product))
|
|
return (ENXIO);
|
|
|
|
cpuid = cpu_id;
|
|
family = CPUID_TO_FAMILY(cpuid);
|
|
model = CPUID_TO_MODEL(cpuid);
|
|
|
|
/*
|
|
* This checks for the byzantine condition of running a heterogenous
|
|
* revision multi-socket system where the attach thread is potentially
|
|
* probing a remote socket's PCI device.
|
|
*
|
|
* Currently, such scenarios are unsupported on models using the SMN
|
|
* (because on those models, amdtemp(4) attaches to a different PCI
|
|
* device than the one that contains AMDTEMP_CPUID).
|
|
*
|
|
* The ancient 0x0F family of devices only supports this register from
|
|
* models 40h+.
|
|
*/
|
|
if (product->amdtemp_has_cpuid && (family > 0x0f ||
|
|
(family == 0x0f && model >= 0x40))) {
|
|
cpuid = pci_read_config(device_get_parent(dev), AMDTEMP_CPUID,
|
|
4);
|
|
family = CPUID_TO_FAMILY(cpuid);
|
|
model = CPUID_TO_MODEL(cpuid);
|
|
}
|
|
|
|
switch (family) {
|
|
case 0x0f:
|
|
/*
|
|
* Thermaltrip Status Register
|
|
*
|
|
* - ThermSenseCoreSel
|
|
*
|
|
* Revision F & G: 0 - Core1, 1 - Core0
|
|
* Other: 0 - Core0, 1 - Core1
|
|
*
|
|
* - CurTmp
|
|
*
|
|
* Revision G: bits 23-14
|
|
* Other: bits 23-16
|
|
*
|
|
* XXX According to the BKDG, CurTmp, ThermSenseSel and
|
|
* ThermSenseCoreSel bits were introduced in Revision F
|
|
* but CurTmp seems working fine as early as Revision C.
|
|
* However, it is not clear whether ThermSenseSel and/or
|
|
* ThermSenseCoreSel work in undocumented cases as well.
|
|
* In fact, the Linux driver suggests it may not work but
|
|
* we just assume it does until we find otherwise.
|
|
*
|
|
* XXX According to Linux, CurTmp starts at -28C on
|
|
* Socket AM2 Revision G processors, which is not
|
|
* documented anywhere.
|
|
*/
|
|
if (model >= 0x40)
|
|
sc->sc_flags |= AMDTEMP_FLAG_CS_SWAP;
|
|
if (model >= 0x60 && model != 0xc1) {
|
|
do_cpuid(0x80000001, regs);
|
|
bid = (regs[1] >> 9) & 0x1f;
|
|
switch (model) {
|
|
case 0x68: /* Socket S1g1 */
|
|
case 0x6c:
|
|
case 0x7c:
|
|
break;
|
|
case 0x6b: /* Socket AM2 and ASB1 (2 cores) */
|
|
if (bid != 0x0b && bid != 0x0c)
|
|
sc->sc_flags |=
|
|
AMDTEMP_FLAG_ALT_OFFSET;
|
|
break;
|
|
case 0x6f: /* Socket AM2 and ASB1 (1 core) */
|
|
case 0x7f:
|
|
if (bid != 0x07 && bid != 0x09 &&
|
|
bid != 0x0c)
|
|
sc->sc_flags |=
|
|
AMDTEMP_FLAG_ALT_OFFSET;
|
|
break;
|
|
default:
|
|
sc->sc_flags |= AMDTEMP_FLAG_ALT_OFFSET;
|
|
}
|
|
sc->sc_flags |= AMDTEMP_FLAG_CT_10BIT;
|
|
}
|
|
|
|
/*
|
|
* There are two sensors per core.
|
|
*/
|
|
sc->sc_ntemps = 2;
|
|
|
|
sc->sc_gettemp = amdtemp_gettemp0f;
|
|
break;
|
|
case 0x10:
|
|
/*
|
|
* Erratum 319 Inaccurate Temperature Measurement
|
|
*
|
|
* http://support.amd.com/us/Processor_TechDocs/41322.pdf
|
|
*/
|
|
do_cpuid(0x80000001, regs);
|
|
switch ((regs[1] >> 28) & 0xf) {
|
|
case 0: /* Socket F */
|
|
erratum319 = 1;
|
|
break;
|
|
case 1: /* Socket AM2+ or AM3 */
|
|
if ((pci_cfgregread(pci_get_bus(dev),
|
|
pci_get_slot(dev), 2, AMDTEMP_DRAM_CONF_HIGH, 2) &
|
|
AMDTEMP_DRAM_MODE_DDR3) != 0 || model > 0x04 ||
|
|
(model == 0x04 && (cpuid & CPUID_STEPPING) >= 3))
|
|
break;
|
|
/* XXX 00100F42h (RB-C2) exists in both formats. */
|
|
erratum319 = 1;
|
|
break;
|
|
}
|
|
/* FALLTHROUGH */
|
|
case 0x11:
|
|
case 0x12:
|
|
case 0x14:
|
|
case 0x15:
|
|
case 0x16:
|
|
sc->sc_ntemps = 1;
|
|
/*
|
|
* Some later (60h+) models of family 15h use a similar SMN
|
|
* network as family 17h. (However, the register index differs
|
|
* from 17h and the decoding matches other 10h-15h models,
|
|
* which differ from 17h.)
|
|
*/
|
|
if (family == 0x15 && model >= 0x60) {
|
|
sc->sc_gettemp = amdtemp_gettemp15hm60h;
|
|
needsmn = true;
|
|
} else
|
|
sc->sc_gettemp = amdtemp_gettemp;
|
|
break;
|
|
case 0x17:
|
|
case 0x19:
|
|
sc->sc_ntemps = 1;
|
|
sc->sc_gettemp = amdtemp_gettemp17h;
|
|
needsmn = true;
|
|
break;
|
|
default:
|
|
device_printf(dev, "Bogus family 0x%x\n", family);
|
|
return (ENXIO);
|
|
}
|
|
|
|
if (needsmn) {
|
|
sc->sc_smn = device_find_child(
|
|
device_get_parent(dev), "amdsmn", -1);
|
|
if (sc->sc_smn == NULL) {
|
|
if (bootverbose)
|
|
device_printf(dev, "No SMN device found\n");
|
|
return (ENXIO);
|
|
}
|
|
}
|
|
|
|
/* Find number of cores per package. */
|
|
sc->sc_ncores = (amd_feature2 & AMDID2_CMP) != 0 ?
|
|
(cpu_procinfo2 & AMDID_CMP_CORES) + 1 : 1;
|
|
if (sc->sc_ncores > MAXCPU)
|
|
return (ENXIO);
|
|
|
|
if (erratum319)
|
|
device_printf(dev,
|
|
"Erratum 319: temperature measurement may be inaccurate\n");
|
|
if (bootverbose)
|
|
device_printf(dev, "Found %d cores and %d sensors.\n",
|
|
sc->sc_ncores,
|
|
sc->sc_ntemps > 1 ? sc->sc_ntemps * sc->sc_ncores : 1);
|
|
|
|
/*
|
|
* dev.amdtemp.N tree.
|
|
*/
|
|
unit = device_get_unit(dev);
|
|
snprintf(tn, sizeof(tn), "dev.amdtemp.%d.sensor_offset", unit);
|
|
TUNABLE_INT_FETCH(tn, &sc->sc_offset);
|
|
|
|
sysctlctx = device_get_sysctl_ctx(dev);
|
|
SYSCTL_ADD_INT(sysctlctx,
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO,
|
|
"sensor_offset", CTLFLAG_RW, &sc->sc_offset, 0,
|
|
"Temperature sensor offset");
|
|
sysctlnode = SYSCTL_ADD_NODE(sysctlctx,
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO,
|
|
"core0", CTLFLAG_RD | CTLFLAG_MPSAFE, 0, "Core 0");
|
|
|
|
SYSCTL_ADD_PROC(sysctlctx,
|
|
SYSCTL_CHILDREN(sysctlnode),
|
|
OID_AUTO, "sensor0",
|
|
CTLTYPE_INT | CTLFLAG_RD | CTLFLAG_NEEDGIANT,
|
|
dev, CORE0_SENSOR0, amdtemp_sysctl, "IK",
|
|
"Core 0 / Sensor 0 temperature");
|
|
|
|
if (family == 0x17)
|
|
amdtemp_probe_ccd_sensors17h(dev, model);
|
|
else if (family == 0x19)
|
|
amdtemp_probe_ccd_sensors19h(dev, model);
|
|
else if (sc->sc_ntemps > 1) {
|
|
SYSCTL_ADD_PROC(sysctlctx,
|
|
SYSCTL_CHILDREN(sysctlnode),
|
|
OID_AUTO, "sensor1",
|
|
CTLTYPE_INT | CTLFLAG_RD | CTLFLAG_NEEDGIANT,
|
|
dev, CORE0_SENSOR1, amdtemp_sysctl, "IK",
|
|
"Core 0 / Sensor 1 temperature");
|
|
|
|
if (sc->sc_ncores > 1) {
|
|
sysctlnode = SYSCTL_ADD_NODE(sysctlctx,
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
|
|
OID_AUTO, "core1", CTLFLAG_RD | CTLFLAG_MPSAFE,
|
|
0, "Core 1");
|
|
|
|
SYSCTL_ADD_PROC(sysctlctx,
|
|
SYSCTL_CHILDREN(sysctlnode),
|
|
OID_AUTO, "sensor0",
|
|
CTLTYPE_INT | CTLFLAG_RD | CTLFLAG_NEEDGIANT,
|
|
dev, CORE1_SENSOR0, amdtemp_sysctl, "IK",
|
|
"Core 1 / Sensor 0 temperature");
|
|
|
|
SYSCTL_ADD_PROC(sysctlctx,
|
|
SYSCTL_CHILDREN(sysctlnode),
|
|
OID_AUTO, "sensor1",
|
|
CTLTYPE_INT | CTLFLAG_RD | CTLFLAG_NEEDGIANT,
|
|
dev, CORE1_SENSOR1, amdtemp_sysctl, "IK",
|
|
"Core 1 / Sensor 1 temperature");
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Try to create dev.cpu sysctl entries and setup intrhook function.
|
|
* This is needed because the cpu driver may be loaded late on boot,
|
|
* after us.
|
|
*/
|
|
amdtemp_intrhook(dev);
|
|
sc->sc_ich.ich_func = amdtemp_intrhook;
|
|
sc->sc_ich.ich_arg = dev;
|
|
if (config_intrhook_establish(&sc->sc_ich) != 0) {
|
|
device_printf(dev, "config_intrhook_establish failed!\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
void
|
|
amdtemp_intrhook(void *arg)
|
|
{
|
|
struct amdtemp_softc *sc;
|
|
struct sysctl_ctx_list *sysctlctx;
|
|
device_t dev = (device_t)arg;
|
|
device_t acpi, cpu, nexus;
|
|
amdsensor_t sensor;
|
|
int i;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
/*
|
|
* dev.cpu.N.temperature.
|
|
*/
|
|
nexus = device_find_child(root_bus, "nexus", 0);
|
|
acpi = device_find_child(nexus, "acpi", 0);
|
|
|
|
for (i = 0; i < sc->sc_ncores; i++) {
|
|
if (sc->sc_sysctl_cpu[i] != NULL)
|
|
continue;
|
|
cpu = device_find_child(acpi, "cpu",
|
|
device_get_unit(dev) * sc->sc_ncores + i);
|
|
if (cpu != NULL) {
|
|
sysctlctx = device_get_sysctl_ctx(cpu);
|
|
|
|
sensor = sc->sc_ntemps > 1 ?
|
|
(i == 0 ? CORE0 : CORE1) : CORE0_SENSOR0;
|
|
sc->sc_sysctl_cpu[i] = SYSCTL_ADD_PROC(sysctlctx,
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(cpu)),
|
|
OID_AUTO, "temperature",
|
|
CTLTYPE_INT | CTLFLAG_RD | CTLFLAG_NEEDGIANT,
|
|
dev, sensor, amdtemp_sysctl, "IK",
|
|
"Current temparature");
|
|
}
|
|
}
|
|
if (sc->sc_ich.ich_arg != NULL)
|
|
config_intrhook_disestablish(&sc->sc_ich);
|
|
}
|
|
|
|
int
|
|
amdtemp_detach(device_t dev)
|
|
{
|
|
struct amdtemp_softc *sc = device_get_softc(dev);
|
|
int i;
|
|
|
|
for (i = 0; i < sc->sc_ncores; i++)
|
|
if (sc->sc_sysctl_cpu[i] != NULL)
|
|
sysctl_remove_oid(sc->sc_sysctl_cpu[i], 1, 0);
|
|
|
|
/* NewBus removes the dev.amdtemp.N tree by itself. */
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
amdtemp_sysctl(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
device_t dev = (device_t)arg1;
|
|
struct amdtemp_softc *sc = device_get_softc(dev);
|
|
amdsensor_t sensor = (amdsensor_t)arg2;
|
|
int32_t auxtemp[2], temp;
|
|
int error;
|
|
|
|
switch (sensor) {
|
|
case CORE0:
|
|
auxtemp[0] = sc->sc_gettemp(dev, CORE0_SENSOR0);
|
|
auxtemp[1] = sc->sc_gettemp(dev, CORE0_SENSOR1);
|
|
temp = imax(auxtemp[0], auxtemp[1]);
|
|
break;
|
|
case CORE1:
|
|
auxtemp[0] = sc->sc_gettemp(dev, CORE1_SENSOR0);
|
|
auxtemp[1] = sc->sc_gettemp(dev, CORE1_SENSOR1);
|
|
temp = imax(auxtemp[0], auxtemp[1]);
|
|
break;
|
|
default:
|
|
temp = sc->sc_gettemp(dev, sensor);
|
|
break;
|
|
}
|
|
error = sysctl_handle_int(oidp, &temp, 0, req);
|
|
|
|
return (error);
|
|
}
|
|
|
|
#define AMDTEMP_ZERO_C_TO_K 2731
|
|
|
|
static int32_t
|
|
amdtemp_gettemp0f(device_t dev, amdsensor_t sensor)
|
|
{
|
|
struct amdtemp_softc *sc = device_get_softc(dev);
|
|
uint32_t mask, offset, temp;
|
|
|
|
/* Set Sensor/Core selector. */
|
|
temp = pci_read_config(dev, AMDTEMP_THERMTP_STAT, 1);
|
|
temp &= ~(AMDTEMP_TTSR_SELCORE | AMDTEMP_TTSR_SELSENSOR);
|
|
switch (sensor) {
|
|
case CORE0_SENSOR1:
|
|
temp |= AMDTEMP_TTSR_SELSENSOR;
|
|
/* FALLTHROUGH */
|
|
case CORE0_SENSOR0:
|
|
case CORE0:
|
|
if ((sc->sc_flags & AMDTEMP_FLAG_CS_SWAP) != 0)
|
|
temp |= AMDTEMP_TTSR_SELCORE;
|
|
break;
|
|
case CORE1_SENSOR1:
|
|
temp |= AMDTEMP_TTSR_SELSENSOR;
|
|
/* FALLTHROUGH */
|
|
case CORE1_SENSOR0:
|
|
case CORE1:
|
|
if ((sc->sc_flags & AMDTEMP_FLAG_CS_SWAP) == 0)
|
|
temp |= AMDTEMP_TTSR_SELCORE;
|
|
break;
|
|
default:
|
|
__assert_unreachable();
|
|
}
|
|
pci_write_config(dev, AMDTEMP_THERMTP_STAT, temp, 1);
|
|
|
|
mask = (sc->sc_flags & AMDTEMP_FLAG_CT_10BIT) != 0 ? 0x3ff : 0x3fc;
|
|
offset = (sc->sc_flags & AMDTEMP_FLAG_ALT_OFFSET) != 0 ? 28 : 49;
|
|
temp = pci_read_config(dev, AMDTEMP_THERMTP_STAT, 4);
|
|
temp = ((temp >> 14) & mask) * 5 / 2;
|
|
temp += AMDTEMP_ZERO_C_TO_K + (sc->sc_offset - offset) * 10;
|
|
|
|
return (temp);
|
|
}
|
|
|
|
static uint32_t
|
|
amdtemp_decode_fam10h_to_17h(int32_t sc_offset, uint32_t val, bool minus49)
|
|
{
|
|
uint32_t temp;
|
|
|
|
/* Convert raw register subfield units (0.125C) to units of 0.1C. */
|
|
temp = (val & AMDTEMP_REPTMP10H_CURTMP_MASK) * 5 / 4;
|
|
|
|
if (minus49)
|
|
temp -= AMDTEMP_CURTMP_RANGE_ADJUST;
|
|
|
|
temp += AMDTEMP_ZERO_C_TO_K + sc_offset * 10;
|
|
return (temp);
|
|
}
|
|
|
|
static uint32_t
|
|
amdtemp_decode_fam10h_to_16h(int32_t sc_offset, uint32_t val)
|
|
{
|
|
bool minus49;
|
|
|
|
/*
|
|
* On Family 15h and higher, if CurTmpTjSel is 11b, the range is
|
|
* adjusted down by 49.0 degrees Celsius. (This adjustment is not
|
|
* documented in BKDGs prior to family 15h model 00h.)
|
|
*/
|
|
minus49 = (CPUID_TO_FAMILY(cpu_id) >= 0x15 &&
|
|
((val >> AMDTEMP_REPTMP10H_TJSEL_SHIFT) &
|
|
AMDTEMP_REPTMP10H_TJSEL_MASK) == 0x3);
|
|
|
|
return (amdtemp_decode_fam10h_to_17h(sc_offset,
|
|
val >> AMDTEMP_REPTMP10H_CURTMP_SHIFT, minus49));
|
|
}
|
|
|
|
static uint32_t
|
|
amdtemp_decode_fam17h_tctl(int32_t sc_offset, uint32_t val)
|
|
{
|
|
bool minus49;
|
|
|
|
minus49 = ((val & AMDTEMP_17H_CUR_TMP_RANGE_SEL) != 0);
|
|
return (amdtemp_decode_fam10h_to_17h(sc_offset,
|
|
val >> AMDTEMP_REPTMP10H_CURTMP_SHIFT, minus49));
|
|
}
|
|
|
|
static int32_t
|
|
amdtemp_gettemp(device_t dev, amdsensor_t sensor)
|
|
{
|
|
struct amdtemp_softc *sc = device_get_softc(dev);
|
|
uint32_t temp;
|
|
|
|
temp = pci_read_config(dev, AMDTEMP_REPTMP_CTRL, 4);
|
|
return (amdtemp_decode_fam10h_to_16h(sc->sc_offset, temp));
|
|
}
|
|
|
|
static int32_t
|
|
amdtemp_gettemp15hm60h(device_t dev, amdsensor_t sensor)
|
|
{
|
|
struct amdtemp_softc *sc = device_get_softc(dev);
|
|
uint32_t val;
|
|
int error;
|
|
|
|
error = amdsmn_read(sc->sc_smn, AMDTEMP_15H_M60H_REPTMP_CTRL, &val);
|
|
KASSERT(error == 0, ("amdsmn_read"));
|
|
return (amdtemp_decode_fam10h_to_16h(sc->sc_offset, val));
|
|
}
|
|
|
|
static int32_t
|
|
amdtemp_gettemp17h(device_t dev, amdsensor_t sensor)
|
|
{
|
|
struct amdtemp_softc *sc = device_get_softc(dev);
|
|
uint32_t val;
|
|
int error;
|
|
|
|
switch (sensor) {
|
|
case CORE0_SENSOR0:
|
|
/* Tctl */
|
|
error = amdsmn_read(sc->sc_smn, AMDTEMP_17H_CUR_TMP, &val);
|
|
KASSERT(error == 0, ("amdsmn_read"));
|
|
return (amdtemp_decode_fam17h_tctl(sc->sc_offset, val));
|
|
case CCD_BASE ... CCD_MAX:
|
|
/* Tccd<N> */
|
|
error = amdsmn_read(sc->sc_smn, AMDTEMP_17H_CCD_TMP_BASE +
|
|
(((int)sensor - CCD_BASE) * sizeof(val)), &val);
|
|
KASSERT(error == 0, ("amdsmn_read2"));
|
|
KASSERT((val & AMDTEMP_17H_CCD_TMP_VALID) != 0,
|
|
("sensor %d: not valid", (int)sensor));
|
|
return (amdtemp_decode_fam10h_to_17h(sc->sc_offset, val, true));
|
|
default:
|
|
__assert_unreachable();
|
|
}
|
|
}
|
|
|
|
static void
|
|
amdtemp_probe_ccd_sensors(device_t dev, uint32_t maxreg)
|
|
{
|
|
char sensor_name[16], sensor_descr[32];
|
|
struct amdtemp_softc *sc;
|
|
uint32_t i, val;
|
|
int error;
|
|
|
|
sc = device_get_softc(dev);
|
|
for (i = 0; i < maxreg; i++) {
|
|
error = amdsmn_read(sc->sc_smn, AMDTEMP_17H_CCD_TMP_BASE +
|
|
(i * sizeof(val)), &val);
|
|
if (error != 0)
|
|
continue;
|
|
if ((val & AMDTEMP_17H_CCD_TMP_VALID) == 0)
|
|
continue;
|
|
|
|
snprintf(sensor_name, sizeof(sensor_name), "ccd%u", i);
|
|
snprintf(sensor_descr, sizeof(sensor_descr),
|
|
"CCD %u temperature (Tccd%u)", i, i);
|
|
|
|
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO,
|
|
sensor_name, CTLTYPE_INT | CTLFLAG_RD | CTLFLAG_MPSAFE,
|
|
dev, CCD_BASE + i, amdtemp_sysctl, "IK", sensor_descr);
|
|
}
|
|
}
|
|
|
|
static void
|
|
amdtemp_probe_ccd_sensors17h(device_t dev, uint32_t model)
|
|
{
|
|
uint32_t maxreg;
|
|
|
|
switch (model) {
|
|
case 0x00 ... 0x2f: /* Zen1, Zen+ */
|
|
maxreg = 4;
|
|
break;
|
|
case 0x30 ... 0x3f: /* Zen2 TR (Castle Peak)/EPYC (Rome) */
|
|
case 0x60 ... 0x7f: /* Zen2 Ryzen (Renoir APU, Matisse) */
|
|
case 0x90 ... 0x9f: /* Zen2 Ryzen (Van Gogh APU) */
|
|
maxreg = 8;
|
|
_Static_assert((int)NUM_CCDS >= 8, "");
|
|
break;
|
|
default:
|
|
device_printf(dev,
|
|
"Unrecognized Family 17h Model: %02xh\n", model);
|
|
return;
|
|
}
|
|
|
|
amdtemp_probe_ccd_sensors(dev, maxreg);
|
|
}
|
|
|
|
static void
|
|
amdtemp_probe_ccd_sensors19h(device_t dev, uint32_t model)
|
|
{
|
|
uint32_t maxreg;
|
|
|
|
switch (model) {
|
|
case 0x00 ... 0x0f: /* Zen3 EPYC "Milan" */
|
|
case 0x20 ... 0x2f: /* Zen3 Ryzen "Vermeer" */
|
|
maxreg = 8;
|
|
_Static_assert((int)NUM_CCDS >= 8, "");
|
|
break;
|
|
default:
|
|
device_printf(dev,
|
|
"Unrecognized Family 19h Model: %02xh\n", model);
|
|
return;
|
|
}
|
|
|
|
amdtemp_probe_ccd_sensors(dev, maxreg);
|
|
}
|