HardenedBSD/share/man/man4/spkr.4

.TH SPKR 4
.SH NAME
spkr \- console speaker device driver
.SH DESCRIPTION
The speaker device driver allows applications to control the PC console
speaker on an IBM-PC-compatible machine running UNIX.
.PP
Only one process may have this device open at any given time; open() and
close() are used to lock and relinquish it. An attempt to open() when
another process has the device locked will return -1 with an EBUSY error
indication. Writes to the device are interpreted as 'play strings' in a
simple ASCII melody notation. An ioctl() for tone generation at arbitrary
frequencies is also supported.
.PP
Sound-generation does \fInot\fR monopolize the processor; in fact, the driver
spends most of its time sleeping while the PC hardware is emitting
tones. Other processes may emit beeps while the driver is running.
.PP
Applications may call ioctl() on a speaker file descriptor to control the
speaker driver directly; definitions for the ioctl() interface are in
sys/spkr.h. The tone_t structure used in these calls has two fields,
specifying a frequency (in hz) and a duration (in 1/100ths of a second).
A frequency of zero is interpreted as a rest.
.PP
At present there are two such ioctls. SPKRTONE accepts a pointer to a
single tone structure as third argument and plays it. SPKRTUNE accepts a
pointer to the first of an array of tone structures and plays them in
continuous sequence; this array must be terminated by a final member with
a zero duration.
.PP
The play-string language is modelled on the PLAY statement conventions of
IBM BASIC 2.0. The MB, MF and X primitives of PLAY are not useful in a UNIX 
environment and are omitted. The `octave-tracking' feature is also new.
.PP
There are 84 accessible notes numbered 1-83 in 7 octaves, each running from
C to B, numbered 0-6; the scale is equal-tempered A440 and octave 3 starts
with middle C. By default, the play function emits half-second notes with the
last 1/16th second being `rest time'.
.PP
Play strings are interpreted left to right as a series of play command groups;
letter case is ignored. Play command groups are as follows:
.PP
CDEFGAB -- letters A through G cause the corresponding note to be played in the
current octave. A note letter may optionally be followed by an \fIaccidental
sign\fR, one of # + or -; the first two of these cause it to be sharped one
half-tone, the last causes it to be flatted one half-tone. It may also be
followed by a time value number and by sustain dots (see below). Time values
are interpreted as for the L command below;.
.PP
O <n> -- if <n> is numeric, this sets the current octave. <n> may also be one
of 'L' or 'N' to enable or disable octave-tracking (it is disabled by default).
When octave-tracking is on, interpretation of a pair of letter notes will
change octaves if necessary in order to make the smallest possible jump between
notes. Thus "olbc" will be played as "olb>c", and "olcb" as "olc<b". Octave
locking is disabled for one letter note following by >, < and O[0123456].
.PP
> -- bump the current octave up one.
.PP
< -- drop the current octave down one.
.PP
N <n> -- play note n, n being 1 to 84 or 0 for a rest of current time value.
May be followedv by sustain dots.
.PP
L <n> -- sets the current time value for notes. The default is L4, quarter
notes. The lowest possible value is 1; values up to 64 are accepted. L1 sets
whole notes, L2 sets half notes, L4 sets quarter notes, etc..
.PP
P <n> -- pause (rest), with <n> interpreted as for L. May be followed by
sustain dots. May also be written '~'.
.PP
T <n> -- Sets the number of quarter notes per minute; default is 120. Musical
names for common tempi are:

.TS
a a a.
        	Tempo    	Beats Per Minute
very slow	Larghissimo	
        	Largo    	40-60
         	Larghetto    	60-66
        	Grave       	
        	Lento       	
        	Adagio       	66-76
slow    	Adagietto    	
        	Andante   	76-108
medium   	Andantino	
        	Moderato	108-120
fast    	Allegretto	
        	Allegro   	120-168
        	Vivace    	
        	Veloce    	
        	Presto    	168-208
very fast	Prestissimo	
.TE
.PP
M[LNS] -- set articulation. MN (N for normal) is the default; the last 1/8th of
the note's value is rest time. You can set ML for legato (no rest space) or
MS (staccato) 1/4 rest space.
.PP
Notes (that is, CDEFGAB or N command character groups) may be followed by
sustain dots. Each dot causes the note's value to be lengthened by one-half
for each one. Thus, a note dotted once is held for 3/2 of its undotted value;
dotted twice, it is held 9/4, and three times would give 27/8. 
.PP
Whitespace in play strings is simply skipped and may be used to separate
melody sections.
.SH BUGS
Due to roundoff in the pitch tables and slop in the tone-generation and timer
hardware (neither of which was designed for precision), neither pitch accuracy
nor timings will be mathematically exact. There is no volume control.
.PP
In play strings which are very long (longer than your system's physical I/O
blocks) note suffixes or numbers may occasionally be parsed incorrectly due
to crossing a block boundary.
.SH FILES
/dev/speaker -- speaker device file
.SH AUTHOR
Eric S. Raymond (esr@snark.thyrsus.com) Feb 1990