HardenedBSD/sys/dev/ic/i8251.h
Yoshihiro Takahashi ebd2b74476 - Cleanup i8251 related defines.
- Move i8255 related defines into a separate file.
2008-09-07 04:35:04 +00:00

112 lines
4.5 KiB
C

/*-
* Copyright (c) 1991 The Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* modified for PC9801 by M.Ishii
* Kyoto University Microcomputer Club (KMC)
*
* modified for 8251(FIFO) by Seigo TANIMURA <tanimura@FreeBSD.org>
*/
/* i8251 mode register */
#define MOD8251_5BITS 0x00
#define MOD8251_6BITS 0x04
#define MOD8251_7BITS 0x08
#define MOD8251_8BITS 0x0c
#define MOD8251_PENAB 0x10 /* parity enable */
#define MOD8251_PEVEN 0x20 /* parity even */
#define MOD8251_STOP1 0x40 /* 1 stop bit */
#define MOD8251_STOP15 0x80 /* 1.5 stop bit */
#define MOD8251_STOP2 0xc0 /* 2 stop bit */
#define MOD8251_CLKx1 0x01 /* x1 */
#define MOD8251_CLKx16 0x02 /* x16 */
#define MOD8251_CLKx64 0x03 /* x64 */
/* i8251 command register */
#define CMD8251_TxEN 0x01 /* transmit enable */
#define CMD8251_DTR 0x02 /* assert DTR */
#define CMD8251_RxEN 0x04 /* receive enable */
#define CMD8251_SBRK 0x08 /* send break */
#define CMD8251_ER 0x10 /* error reset */
#define CMD8251_RTS 0x20 /* assert RTS */
#define CMD8251_RESET 0x40 /* internal reset */
#define CMD8251_EH 0x80 /* enter hunt mode */
/* i8251 status register */
#define STS8251_TxRDY 0x01 /* transmit READY */
#define STS8251_RxRDY 0x02 /* data exists in receive buffer */
#define STS8251_TxEMP 0x04 /* transmit buffer EMPTY */
#define STS8251_PE 0x08 /* perity error */
#define STS8251_OE 0x10 /* overrun error */
#define STS8251_FE 0x20 /* framing error */
#define STS8251_BI 0x40 /* break detect */
#define STS8251_DSR 0x80 /* DSR is asserted */
/* i8251F line status register */
#define FLSR_TxEMP 0x01 /* transmit buffer EMPTY */
#define FLSR_TxRDY 0x02 /* transmit READY */
#define FLSR_RxRDY 0x04 /* data exists in receive buffer */
#define FLSR_OE 0x10 /* overrun error */
#define FLSR_PE 0x20 /* perity error */
#define FLSR_BI 0x80 /* break detect */
/* i8251F modem status register */
#define MSR_DCD 0x80 /* Current Data Carrier Detect */
#define MSR_RI 0x40 /* Current Ring Indicator */
#define MSR_DSR 0x20 /* Current Data Set Ready */
#define MSR_CTS 0x10 /* Current Clear to Send */
#define MSR_DDCD 0x08 /* DCD has changed state */
#define MSR_TERI 0x04 /* RI has toggled low to high */
#define MSR_DDSR 0x02 /* DSR has changed state */
#define MSR_DCTS 0x01 /* CTS has changed state */
/* i8251F interrupt identification register */
#define IIR_FIFO_CK1 0x40
#define IIR_FIFO_CK2 0x20
#define IIR_IMASK 0x0f
#define IIR_RXTOUT 0x0c /* Receiver timeout */
#define IIR_RLS 0x06 /* Line status change */
#define IIR_RXRDY 0x04 /* Receiver ready */
#define IIR_TXRDY 0x02 /* Transmitter ready */
#define IIR_NOPEND 0x01 /* Transmitter ready */
#define IIR_MLSC 0x00 /* Modem status */
/* i8251F fifo control register */
#define FIFO_ENABLE 0x01 /* Turn the FIFO on */
#define FIFO_RCV_RST 0x02 /* Reset RX FIFO */
#define FIFO_XMT_RST 0x04 /* Reset TX FIFO */
#define FIFO_LSR_EN 0x08
#define FIFO_MSR_EN 0x10
#define FIFO_TRIGGER_1 0x00 /* Trigger RXRDY intr on 1 character */
#define FIFO_TRIGGER_4 0x40 /* ibid 4 */
#define FIFO_TRIGGER_8 0x80 /* ibid 8 */
#define FIFO_TRIGGER_14 0xc0 /* ibid 14 */