HardenedBSD/etc/network.subr
Jordan K. Hubbard 919d435ace Neaten up some things which were inconsistent, add a few more flags
to things which need them, general cleanup.
Submitted by:	Brian Somers <brian@awfulhak.org>
1997-05-19 07:46:51 +00:00

209 lines
6.0 KiB
Bash

#!/bin/sh -
#
# $Id: rc.network,v 1.7 1997/05/13 08:22:27 jkh Exp $
# From: @(#)netstart 5.9 (Berkeley) 3/30/91
# Note that almost all the user-configurable behavior is no longer in
# this file, but rather in /etc/rc.conf. Please check that file
# first before contemplating any changes here. If you do need to change
# this file for some reason, we would like to know about it.
# First pass startup stuff.
network_pass1() {
echo -n 'Doing initial network setup:'
# Set the host name if it is not already set
if [ -z "`hostname -s`" ] ; then
hostname $hostname
echo -n ' hostname'
fi
# Set the domainname if we're using NIS
if [ -n "$nisdomainname" -a "x$nisdomainname" != "xNO" ] ; then
domainname $nisdomainname
echo -n ' domain'
fi
echo '.'
# Set up all the network interfaces, calling startup scripts if needed
for ifn in ${network_interfaces}; do
if [ -e /etc/start_if.${ifn} ]; then
. /etc/start_if.${ifn} ${ifn}
fi
# Do the primary ifconfig if specified
eval ifconfig_args=\$ifconfig_${ifn}
if [ -n "${ifconfig_args}" ] ; then
ifconfig ${ifn} ${ifconfig_args}
fi
# Check to see if aliases need to be added
alias=0
while :
do
eval ifconfig_args=\$ifconfig_${ifn}_alias${alias}
if [ -n "${ifconfig_args}" ]; then
ifconfig ${ifn} ${ifconfig_args} alias
alias=`expr ${alias} + 1`
else
break;
fi
done
# Do ipx address if specified
eval ifconfig_args=\$ifconfig_${ifn}_ipx
if [ -n "${ifconfig_args}" ]; then
ifconfig ${ifn} ${ifconfig_args}
fi
ifconfig ${ifn}
done
# If IP filtering
if [ -n "$firewall" -a "x$firewall" != "xNO" -a -f /etc/rc.firewall ] ; then
echo -n ' firewall'
. /etc/rc.firewall
fi
if [ "x$defaultrouter" != "xNO" ] ; then
static_routes="default ${static_routes}"
route_default="default ${defaultrouter}"
fi
# Set up any static routes. This should be done before router discovery.
if [ "x${static_routes}" != "x" ]; then
for i in ${static_routes}; do
eval route_args=\$route_${i}
route add ${route_args}
done
fi
echo -n 'Additional routing options:'
if [ "X$gateway_enable" = X"YES" ]; then
echo -n ' IP gateway=YES'
sysctl -w net.inet.ip.forwarding=1 >/dev/null 2>&1
fi
if [ "X$router_enable" = X"YES" ]; then
echo -n " ${router}"; ${router} ${router_flags}
fi
if [ "X$ipxgateway_enable" = X"YES" ]; then
echo -n ' IPX gateway=YES'
sysctl -w net.ipx.ipx.ipxforwarding=1 >/dev/null 2>&1
fi
if [ "X$ipxrouted_enable" = X"YES" ]; then
echo -n ' IPXrouted: '
IPXrouted ${ipxrouted_flags} > /dev/null 2>&1
fi
if [ "X$arpproxy_all" = X"YES" ]; then
echo -n ' enabling ARP_PROXY_ALL: '
sysctl -w net.link.ether.inet.proxyall=1 2>&1
fi
echo '.'
network_pass1_done=YES # Let future generations know we made it.
}
network_pass2() {
echo -n 'Doing additional network setup:'
if [ -n "$tcp_extensions" -a "x$tcp_extensions" != "xYES" ] ; then
echo -n ' tcp extensions=NO'
sysctl -w net.inet.tcp.rfc1323=0 >/dev/null 2>&1
sysctl -w net.inet.tcp.rfc1644=0 >/dev/null 2>&1
fi
if [ "X${named_enable}" = X"YES" ]; then
echo -n ' named'; named ${named_flags}
fi
if [ "X${ntpdate_enable}" = X"YES" -o "X${xntpd_enable}" = X"YES" ]; then
if [ "X${ntpdate_enable}" = X"YES" ]; then
echo -n ' ntpdate'; ntpdate ${ntpdate_flags} >/dev/null 2>&1
fi
if [ "X${xntpd_enable}" = X"YES" ]; then
echo -n ' xntpd'; xntpd ${xntpd_flags}
fi
fi
if [ "X${timed_enable}" = X"YES" ]; then
echo -n ' timed'; timed ${timed_flags}
fi
if [ "X${portmap_enable}" = X"YES" ]; then
echo -n ' portmap'; portmap ${portmap_flags}
fi
# Start ypserv if we're an NIS server.
# Run rpc.ypxfrd and rpc.yppasswdd only on the NIS master server.
if [ "X${nis_server_enable}" = X"YES" ]; then
echo -n ' ypserv'; ypserv ${nis_server_flags}
if [ "X${nis_ypxfrd_enable}" = X"YES" ]; then
echo -n ' rpc.ypxfrd'; rpc.ypxfrd ${nis_ypxfrd_flags}
fi
if [ "X${nis_yppasswdd_enable}" = X"YES" ]; then
echo -n ' rpc.yppasswdd'; rpc.yppasswdd ${nis_yppasswdd_flags}
fi
fi
# Start ypbind if we're an NIS client
if [ "X${nis_client_enable}" = X"YES" ]; then
echo -n ' ypbind'; ypbind ${nis_client_flags}
if [ "X${nis_ypset_enable}" = X"YES" ]; then
echo -n ' ypset'; ypset ${nis_ypset_flags}
fi
fi
echo '.'
network_pass2_done=YES
}
network_pass3() {
echo -n 'Starting final network daemons:'
if [ "X${nfs_server_enable}" = X"YES" -a -r /etc/exports ]; then
echo -n ' mountd'
if [ "X${weak_mountd_authentication}" = X"YES" ]; then
mountd_flags="-n"
fi
mountd ${mountd_flags}
if [ "X${nfs_reserved_port_only}" = X"YES" ]; then
echo -n ' nfsprivport=YES'
sysctl -w vfs.nfs.nfs_privport=1 >/dev/null 2>&1
fi
echo -n ' nfsd'; nfsd ${nfs_server_flags}
if [ "X$rpc_lockd_enable" = X"YES" ]; then
echo -n ' rpc.lockd'; rpc.lockd
fi
if [ "X$rpc_statd_enable" = X"YES" ]; then
echo -n ' rpc.statd'; rpc.statd
fi
fi
if [ "X${nfs_client_enable}" = X"YES" ]; then
echo -n ' nfsiod'; nfsiod ${nfs_client_flags}
fi
if [ "X${amd_enable}" = X"YES" ]; then
echo -n ' amd'
amd -p ${amd_flags} > /var/run/amd.pid 2> /dev/null
fi
if [ "X${rwhod_enable}" = X"YES" ]; then
echo -n ' rwhod'; rwhod
fi
# Kerberos runs ONLY on the Kerberos server machine
if [ "X${kerberos_server_enable}" = X"YES" ]; then
echo -n ' kerberos'; kerberos >> /var/log/kerberos.log &
echo -n ' kadmind'; \
(sleep 20; kadmind -n >/dev/null 2>&1 &) &
fi
# IP multicast routing daemon
if [ "X${mrouted_enable}" = X"YES" ]; then
echo -n ' mrouted'; mrouted ${mrouted_flags}
fi
echo '.'
network_pass3_done=YES
}