mirror of
https://git.hardenedbsd.org/hardenedbsd/HardenedBSD.git
synced 2024-12-28 22:36:24 +01:00
e7f0d7cf47
This turns ieee80211_node_pwrsave(), ieee80211_sta_pwrsave() and ieee80211_recv_pspoll() into methods. The intent is to let drivers override these and tie into the power save management pathway. For ath(4), this is the beginning of forcing a node software queue to stop and start as needed, as well as supporting "leaking" single frames from the software queue to the hardware. Right now, ieee80211_recv_pspoll() will attempt to transmit a single frame to the hardware (whether it be a data frame on the power-save queue or a NULL data frame) but the driver may have hardware/software queued frames queued up. This initial work is an attempt at providing the hooks required to implement correct behaviour. Allowing ieee80211_node_pwrsave() to be overridden allows the ath(4) driver to pause and unpause the entire software queue for a given node. It doesn't make sense to transmit anything whilst the node is asleep. Please note that there are other corner cases to correctly handle - specifically, setting the MORE data bit correctly on frames to a station, as well as keeping the TIM updated. Those particular issues can be addressed later.
920 lines
26 KiB
C
920 lines
26 KiB
C
/*-
|
|
* Copyright (c) 2007-2009 Sam Leffler, Errno Consulting
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
#ifdef __FreeBSD__
|
|
__FBSDID("$FreeBSD$");
|
|
#endif
|
|
|
|
/*
|
|
* IEEE 802.11 IBSS mode support.
|
|
*/
|
|
#include "opt_inet.h"
|
|
#include "opt_wlan.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/kernel.h>
|
|
|
|
#include <sys/socket.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/sysctl.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_media.h>
|
|
#include <net/if_llc.h>
|
|
#include <net/ethernet.h>
|
|
|
|
#include <net/bpf.h>
|
|
|
|
#include <net80211/ieee80211_var.h>
|
|
#include <net80211/ieee80211_adhoc.h>
|
|
#include <net80211/ieee80211_input.h>
|
|
#ifdef IEEE80211_SUPPORT_SUPERG
|
|
#include <net80211/ieee80211_superg.h>
|
|
#endif
|
|
#ifdef IEEE80211_SUPPORT_TDMA
|
|
#include <net80211/ieee80211_tdma.h>
|
|
#endif
|
|
|
|
#define IEEE80211_RATE2MBS(r) (((r) & IEEE80211_RATE_VAL) / 2)
|
|
|
|
static void adhoc_vattach(struct ieee80211vap *);
|
|
static int adhoc_newstate(struct ieee80211vap *, enum ieee80211_state, int);
|
|
static int adhoc_input(struct ieee80211_node *, struct mbuf *, int, int);
|
|
static void adhoc_recv_mgmt(struct ieee80211_node *, struct mbuf *,
|
|
int subtype, int, int);
|
|
static void ahdemo_recv_mgmt(struct ieee80211_node *, struct mbuf *,
|
|
int subtype, int, int);
|
|
static void adhoc_recv_ctl(struct ieee80211_node *, struct mbuf *, int subtype);
|
|
|
|
void
|
|
ieee80211_adhoc_attach(struct ieee80211com *ic)
|
|
{
|
|
ic->ic_vattach[IEEE80211_M_IBSS] = adhoc_vattach;
|
|
ic->ic_vattach[IEEE80211_M_AHDEMO] = adhoc_vattach;
|
|
}
|
|
|
|
void
|
|
ieee80211_adhoc_detach(struct ieee80211com *ic)
|
|
{
|
|
}
|
|
|
|
static void
|
|
adhoc_vdetach(struct ieee80211vap *vap)
|
|
{
|
|
}
|
|
|
|
static void
|
|
adhoc_vattach(struct ieee80211vap *vap)
|
|
{
|
|
vap->iv_newstate = adhoc_newstate;
|
|
vap->iv_input = adhoc_input;
|
|
if (vap->iv_opmode == IEEE80211_M_IBSS)
|
|
vap->iv_recv_mgmt = adhoc_recv_mgmt;
|
|
else
|
|
vap->iv_recv_mgmt = ahdemo_recv_mgmt;
|
|
vap->iv_recv_ctl = adhoc_recv_ctl;
|
|
vap->iv_opdetach = adhoc_vdetach;
|
|
#ifdef IEEE80211_SUPPORT_TDMA
|
|
/*
|
|
* Throw control to tdma support. Note we do this
|
|
* after setting up our callbacks so it can piggyback
|
|
* on top of us.
|
|
*/
|
|
if (vap->iv_caps & IEEE80211_C_TDMA)
|
|
ieee80211_tdma_vattach(vap);
|
|
#endif
|
|
}
|
|
|
|
static void
|
|
sta_leave(void *arg, struct ieee80211_node *ni)
|
|
{
|
|
struct ieee80211vap *vap = arg;
|
|
|
|
if (ni->ni_vap == vap && ni != vap->iv_bss)
|
|
ieee80211_node_leave(ni);
|
|
}
|
|
|
|
/*
|
|
* IEEE80211_M_IBSS+IEEE80211_M_AHDEMO vap state machine handler.
|
|
*/
|
|
static int
|
|
adhoc_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
|
|
{
|
|
struct ieee80211com *ic = vap->iv_ic;
|
|
struct ieee80211_node *ni;
|
|
enum ieee80211_state ostate;
|
|
|
|
IEEE80211_LOCK_ASSERT(vap->iv_ic);
|
|
|
|
ostate = vap->iv_state;
|
|
IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: %s -> %s (%d)\n",
|
|
__func__, ieee80211_state_name[ostate],
|
|
ieee80211_state_name[nstate], arg);
|
|
vap->iv_state = nstate; /* state transition */
|
|
if (ostate != IEEE80211_S_SCAN)
|
|
ieee80211_cancel_scan(vap); /* background scan */
|
|
ni = vap->iv_bss; /* NB: no reference held */
|
|
switch (nstate) {
|
|
case IEEE80211_S_INIT:
|
|
switch (ostate) {
|
|
case IEEE80211_S_SCAN:
|
|
ieee80211_cancel_scan(vap);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
if (ostate != IEEE80211_S_INIT) {
|
|
/* NB: optimize INIT -> INIT case */
|
|
ieee80211_reset_bss(vap);
|
|
}
|
|
break;
|
|
case IEEE80211_S_SCAN:
|
|
switch (ostate) {
|
|
case IEEE80211_S_RUN: /* beacon miss */
|
|
/* purge station table; entries are stale */
|
|
ieee80211_iterate_nodes(&ic->ic_sta, sta_leave, vap);
|
|
/* fall thru... */
|
|
case IEEE80211_S_INIT:
|
|
if (vap->iv_des_chan != IEEE80211_CHAN_ANYC &&
|
|
!IEEE80211_IS_CHAN_RADAR(vap->iv_des_chan)) {
|
|
/*
|
|
* Already have a channel; bypass the
|
|
* scan and startup immediately.
|
|
*/
|
|
ieee80211_create_ibss(vap, vap->iv_des_chan);
|
|
break;
|
|
}
|
|
/*
|
|
* Initiate a scan. We can come here as a result
|
|
* of an IEEE80211_IOC_SCAN_REQ too in which case
|
|
* the vap will be marked with IEEE80211_FEXT_SCANREQ
|
|
* and the scan request parameters will be present
|
|
* in iv_scanreq. Otherwise we do the default.
|
|
*/
|
|
if (vap->iv_flags_ext & IEEE80211_FEXT_SCANREQ) {
|
|
ieee80211_check_scan(vap,
|
|
vap->iv_scanreq_flags,
|
|
vap->iv_scanreq_duration,
|
|
vap->iv_scanreq_mindwell,
|
|
vap->iv_scanreq_maxdwell,
|
|
vap->iv_scanreq_nssid, vap->iv_scanreq_ssid);
|
|
vap->iv_flags_ext &= ~IEEE80211_FEXT_SCANREQ;
|
|
} else
|
|
ieee80211_check_scan_current(vap);
|
|
break;
|
|
case IEEE80211_S_SCAN:
|
|
/*
|
|
* This can happen because of a change in state
|
|
* that requires a reset. Trigger a new scan
|
|
* unless we're in manual roaming mode in which
|
|
* case an application must issue an explicit request.
|
|
*/
|
|
if (vap->iv_roaming == IEEE80211_ROAMING_AUTO)
|
|
ieee80211_check_scan_current(vap);
|
|
break;
|
|
default:
|
|
goto invalid;
|
|
}
|
|
break;
|
|
case IEEE80211_S_RUN:
|
|
if (vap->iv_flags & IEEE80211_F_WPA) {
|
|
/* XXX validate prerequisites */
|
|
}
|
|
switch (ostate) {
|
|
case IEEE80211_S_SCAN:
|
|
#ifdef IEEE80211_DEBUG
|
|
if (ieee80211_msg_debug(vap)) {
|
|
ieee80211_note(vap,
|
|
"synchronized with %s ssid ",
|
|
ether_sprintf(ni->ni_bssid));
|
|
ieee80211_print_essid(vap->iv_bss->ni_essid,
|
|
ni->ni_esslen);
|
|
/* XXX MCS/HT */
|
|
printf(" channel %d start %uMb\n",
|
|
ieee80211_chan2ieee(ic, ic->ic_curchan),
|
|
IEEE80211_RATE2MBS(ni->ni_txrate));
|
|
}
|
|
#endif
|
|
break;
|
|
default:
|
|
goto invalid;
|
|
}
|
|
/*
|
|
* When 802.1x is not in use mark the port authorized
|
|
* at this point so traffic can flow.
|
|
*/
|
|
if (ni->ni_authmode != IEEE80211_AUTH_8021X)
|
|
ieee80211_node_authorize(ni);
|
|
/*
|
|
* Fake association when joining an existing bss.
|
|
*/
|
|
if (!IEEE80211_ADDR_EQ(ni->ni_macaddr, vap->iv_myaddr) &&
|
|
ic->ic_newassoc != NULL)
|
|
ic->ic_newassoc(ni, ostate != IEEE80211_S_RUN);
|
|
break;
|
|
case IEEE80211_S_SLEEP:
|
|
vap->iv_sta_ps(vap, 0);
|
|
break;
|
|
default:
|
|
invalid:
|
|
IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE,
|
|
"%s: unexpected state transition %s -> %s\n", __func__,
|
|
ieee80211_state_name[ostate], ieee80211_state_name[nstate]);
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Decide if a received management frame should be
|
|
* printed when debugging is enabled. This filters some
|
|
* of the less interesting frames that come frequently
|
|
* (e.g. beacons).
|
|
*/
|
|
static __inline int
|
|
doprint(struct ieee80211vap *vap, int subtype)
|
|
{
|
|
switch (subtype) {
|
|
case IEEE80211_FC0_SUBTYPE_BEACON:
|
|
return (vap->iv_ic->ic_flags & IEEE80211_F_SCAN);
|
|
case IEEE80211_FC0_SUBTYPE_PROBE_REQ:
|
|
return 1;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Process a received frame. The node associated with the sender
|
|
* should be supplied. If nothing was found in the node table then
|
|
* the caller is assumed to supply a reference to iv_bss instead.
|
|
* The RSSI and a timestamp are also supplied. The RSSI data is used
|
|
* during AP scanning to select a AP to associate with; it can have
|
|
* any units so long as values have consistent units and higher values
|
|
* mean ``better signal''. The receive timestamp is currently not used
|
|
* by the 802.11 layer.
|
|
*/
|
|
static int
|
|
adhoc_input(struct ieee80211_node *ni, struct mbuf *m, int rssi, int nf)
|
|
{
|
|
#define HAS_SEQ(type) ((type & 0x4) == 0)
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
struct ieee80211com *ic = ni->ni_ic;
|
|
struct ifnet *ifp = vap->iv_ifp;
|
|
struct ieee80211_frame *wh;
|
|
struct ieee80211_key *key;
|
|
struct ether_header *eh;
|
|
int hdrspace, need_tap = 1; /* mbuf need to be tapped. */
|
|
uint8_t dir, type, subtype, qos;
|
|
uint8_t *bssid;
|
|
uint16_t rxseq;
|
|
|
|
if (m->m_flags & M_AMPDU_MPDU) {
|
|
/*
|
|
* Fastpath for A-MPDU reorder q resubmission. Frames
|
|
* w/ M_AMPDU_MPDU marked have already passed through
|
|
* here but were received out of order and been held on
|
|
* the reorder queue. When resubmitted they are marked
|
|
* with the M_AMPDU_MPDU flag and we can bypass most of
|
|
* the normal processing.
|
|
*/
|
|
wh = mtod(m, struct ieee80211_frame *);
|
|
type = IEEE80211_FC0_TYPE_DATA;
|
|
dir = wh->i_fc[1] & IEEE80211_FC1_DIR_MASK;
|
|
subtype = IEEE80211_FC0_SUBTYPE_QOS;
|
|
hdrspace = ieee80211_hdrspace(ic, wh); /* XXX optimize? */
|
|
goto resubmit_ampdu;
|
|
}
|
|
|
|
KASSERT(ni != NULL, ("null node"));
|
|
ni->ni_inact = ni->ni_inact_reload;
|
|
|
|
type = -1; /* undefined */
|
|
|
|
if (m->m_pkthdr.len < sizeof(struct ieee80211_frame_min)) {
|
|
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
|
|
ni->ni_macaddr, NULL,
|
|
"too short (1): len %u", m->m_pkthdr.len);
|
|
vap->iv_stats.is_rx_tooshort++;
|
|
goto out;
|
|
}
|
|
/*
|
|
* Bit of a cheat here, we use a pointer for a 3-address
|
|
* frame format but don't reference fields past outside
|
|
* ieee80211_frame_min w/o first validating the data is
|
|
* present.
|
|
*/
|
|
wh = mtod(m, struct ieee80211_frame *);
|
|
|
|
if ((wh->i_fc[0] & IEEE80211_FC0_VERSION_MASK) !=
|
|
IEEE80211_FC0_VERSION_0) {
|
|
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
|
|
ni->ni_macaddr, NULL, "wrong version, fc %02x:%02x",
|
|
wh->i_fc[0], wh->i_fc[1]);
|
|
vap->iv_stats.is_rx_badversion++;
|
|
goto err;
|
|
}
|
|
|
|
dir = wh->i_fc[1] & IEEE80211_FC1_DIR_MASK;
|
|
type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK;
|
|
subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK;
|
|
if ((ic->ic_flags & IEEE80211_F_SCAN) == 0) {
|
|
if (dir != IEEE80211_FC1_DIR_NODS)
|
|
bssid = wh->i_addr1;
|
|
else if (type == IEEE80211_FC0_TYPE_CTL)
|
|
bssid = wh->i_addr1;
|
|
else {
|
|
if (m->m_pkthdr.len < sizeof(struct ieee80211_frame)) {
|
|
IEEE80211_DISCARD_MAC(vap,
|
|
IEEE80211_MSG_ANY, ni->ni_macaddr,
|
|
NULL, "too short (2): len %u",
|
|
m->m_pkthdr.len);
|
|
vap->iv_stats.is_rx_tooshort++;
|
|
goto out;
|
|
}
|
|
bssid = wh->i_addr3;
|
|
}
|
|
/*
|
|
* Validate the bssid.
|
|
*/
|
|
if (!IEEE80211_ADDR_EQ(bssid, vap->iv_bss->ni_bssid) &&
|
|
!IEEE80211_ADDR_EQ(bssid, ifp->if_broadcastaddr)) {
|
|
/* not interested in */
|
|
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT,
|
|
bssid, NULL, "%s", "not to bss");
|
|
vap->iv_stats.is_rx_wrongbss++;
|
|
goto out;
|
|
}
|
|
/*
|
|
* Data frame, cons up a node when it doesn't
|
|
* exist. This should probably done after an ACL check.
|
|
*/
|
|
if (type == IEEE80211_FC0_TYPE_DATA &&
|
|
ni == vap->iv_bss &&
|
|
!IEEE80211_ADDR_EQ(wh->i_addr2, ni->ni_macaddr)) {
|
|
/*
|
|
* Beware of frames that come in too early; we
|
|
* can receive broadcast frames and creating sta
|
|
* entries will blow up because there is no bss
|
|
* channel yet.
|
|
*/
|
|
if (vap->iv_state != IEEE80211_S_RUN) {
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
|
|
wh, "data", "not in RUN state (%s)",
|
|
ieee80211_state_name[vap->iv_state]);
|
|
vap->iv_stats.is_rx_badstate++;
|
|
goto err;
|
|
}
|
|
/*
|
|
* Fake up a node for this newly
|
|
* discovered member of the IBSS.
|
|
*/
|
|
ni = ieee80211_fakeup_adhoc_node(vap, wh->i_addr2);
|
|
if (ni == NULL) {
|
|
/* NB: stat kept for alloc failure */
|
|
goto err;
|
|
}
|
|
}
|
|
IEEE80211_RSSI_LPF(ni->ni_avgrssi, rssi);
|
|
ni->ni_noise = nf;
|
|
if (HAS_SEQ(type)) {
|
|
uint8_t tid = ieee80211_gettid(wh);
|
|
if (IEEE80211_QOS_HAS_SEQ(wh) &&
|
|
TID_TO_WME_AC(tid) >= WME_AC_VI)
|
|
ic->ic_wme.wme_hipri_traffic++;
|
|
rxseq = le16toh(*(uint16_t *)wh->i_seq);
|
|
if (! ieee80211_check_rxseq(ni, wh)) {
|
|
/* duplicate, discard */
|
|
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT,
|
|
bssid, "duplicate",
|
|
"seqno <%u,%u> fragno <%u,%u> tid %u",
|
|
rxseq >> IEEE80211_SEQ_SEQ_SHIFT,
|
|
ni->ni_rxseqs[tid] >>
|
|
IEEE80211_SEQ_SEQ_SHIFT,
|
|
rxseq & IEEE80211_SEQ_FRAG_MASK,
|
|
ni->ni_rxseqs[tid] &
|
|
IEEE80211_SEQ_FRAG_MASK,
|
|
tid);
|
|
vap->iv_stats.is_rx_dup++;
|
|
IEEE80211_NODE_STAT(ni, rx_dup);
|
|
goto out;
|
|
}
|
|
ni->ni_rxseqs[tid] = rxseq;
|
|
}
|
|
}
|
|
|
|
switch (type) {
|
|
case IEEE80211_FC0_TYPE_DATA:
|
|
hdrspace = ieee80211_hdrspace(ic, wh);
|
|
if (m->m_len < hdrspace &&
|
|
(m = m_pullup(m, hdrspace)) == NULL) {
|
|
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
|
|
ni->ni_macaddr, NULL,
|
|
"data too short: expecting %u", hdrspace);
|
|
vap->iv_stats.is_rx_tooshort++;
|
|
goto out; /* XXX */
|
|
}
|
|
if (dir != IEEE80211_FC1_DIR_NODS) {
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
|
|
wh, "data", "incorrect dir 0x%x", dir);
|
|
vap->iv_stats.is_rx_wrongdir++;
|
|
goto out;
|
|
}
|
|
/* XXX no power-save support */
|
|
|
|
/*
|
|
* Handle A-MPDU re-ordering. If the frame is to be
|
|
* processed directly then ieee80211_ampdu_reorder
|
|
* will return 0; otherwise it has consumed the mbuf
|
|
* and we should do nothing more with it.
|
|
*/
|
|
if ((m->m_flags & M_AMPDU) &&
|
|
ieee80211_ampdu_reorder(ni, m) != 0) {
|
|
m = NULL;
|
|
goto out;
|
|
}
|
|
resubmit_ampdu:
|
|
|
|
/*
|
|
* Handle privacy requirements. Note that we
|
|
* must not be preempted from here until after
|
|
* we (potentially) call ieee80211_crypto_demic;
|
|
* otherwise we may violate assumptions in the
|
|
* crypto cipher modules used to do delayed update
|
|
* of replay sequence numbers.
|
|
*/
|
|
if (wh->i_fc[1] & IEEE80211_FC1_WEP) {
|
|
if ((vap->iv_flags & IEEE80211_F_PRIVACY) == 0) {
|
|
/*
|
|
* Discard encrypted frames when privacy is off.
|
|
*/
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
|
|
wh, "WEP", "%s", "PRIVACY off");
|
|
vap->iv_stats.is_rx_noprivacy++;
|
|
IEEE80211_NODE_STAT(ni, rx_noprivacy);
|
|
goto out;
|
|
}
|
|
key = ieee80211_crypto_decap(ni, m, hdrspace);
|
|
if (key == NULL) {
|
|
/* NB: stats+msgs handled in crypto_decap */
|
|
IEEE80211_NODE_STAT(ni, rx_wepfail);
|
|
goto out;
|
|
}
|
|
wh = mtod(m, struct ieee80211_frame *);
|
|
wh->i_fc[1] &= ~IEEE80211_FC1_WEP;
|
|
} else {
|
|
/* XXX M_WEP and IEEE80211_F_PRIVACY */
|
|
key = NULL;
|
|
}
|
|
|
|
/*
|
|
* Save QoS bits for use below--before we strip the header.
|
|
*/
|
|
if (subtype == IEEE80211_FC0_SUBTYPE_QOS) {
|
|
qos = (dir == IEEE80211_FC1_DIR_DSTODS) ?
|
|
((struct ieee80211_qosframe_addr4 *)wh)->i_qos[0] :
|
|
((struct ieee80211_qosframe *)wh)->i_qos[0];
|
|
} else
|
|
qos = 0;
|
|
|
|
/*
|
|
* Next up, any fragmentation.
|
|
*/
|
|
if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
|
|
m = ieee80211_defrag(ni, m, hdrspace);
|
|
if (m == NULL) {
|
|
/* Fragment dropped or frame not complete yet */
|
|
goto out;
|
|
}
|
|
}
|
|
wh = NULL; /* no longer valid, catch any uses */
|
|
|
|
/*
|
|
* Next strip any MSDU crypto bits.
|
|
*/
|
|
if (key != NULL && !ieee80211_crypto_demic(vap, key, m, 0)) {
|
|
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT,
|
|
ni->ni_macaddr, "data", "%s", "demic error");
|
|
vap->iv_stats.is_rx_demicfail++;
|
|
IEEE80211_NODE_STAT(ni, rx_demicfail);
|
|
goto out;
|
|
}
|
|
|
|
/* copy to listener after decrypt */
|
|
if (ieee80211_radiotap_active_vap(vap))
|
|
ieee80211_radiotap_rx(vap, m);
|
|
need_tap = 0;
|
|
|
|
/*
|
|
* Finally, strip the 802.11 header.
|
|
*/
|
|
m = ieee80211_decap(vap, m, hdrspace);
|
|
if (m == NULL) {
|
|
/* XXX mask bit to check for both */
|
|
/* don't count Null data frames as errors */
|
|
if (subtype == IEEE80211_FC0_SUBTYPE_NODATA ||
|
|
subtype == IEEE80211_FC0_SUBTYPE_QOS_NULL)
|
|
goto out;
|
|
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT,
|
|
ni->ni_macaddr, "data", "%s", "decap error");
|
|
vap->iv_stats.is_rx_decap++;
|
|
IEEE80211_NODE_STAT(ni, rx_decap);
|
|
goto err;
|
|
}
|
|
eh = mtod(m, struct ether_header *);
|
|
if (!ieee80211_node_is_authorized(ni)) {
|
|
/*
|
|
* Deny any non-PAE frames received prior to
|
|
* authorization. For open/shared-key
|
|
* authentication the port is mark authorized
|
|
* after authentication completes. For 802.1x
|
|
* the port is not marked authorized by the
|
|
* authenticator until the handshake has completed.
|
|
*/
|
|
if (eh->ether_type != htons(ETHERTYPE_PAE)) {
|
|
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT,
|
|
eh->ether_shost, "data",
|
|
"unauthorized port: ether type 0x%x len %u",
|
|
eh->ether_type, m->m_pkthdr.len);
|
|
vap->iv_stats.is_rx_unauth++;
|
|
IEEE80211_NODE_STAT(ni, rx_unauth);
|
|
goto err;
|
|
}
|
|
} else {
|
|
/*
|
|
* When denying unencrypted frames, discard
|
|
* any non-PAE frames received without encryption.
|
|
*/
|
|
if ((vap->iv_flags & IEEE80211_F_DROPUNENC) &&
|
|
(key == NULL && (m->m_flags & M_WEP) == 0) &&
|
|
eh->ether_type != htons(ETHERTYPE_PAE)) {
|
|
/*
|
|
* Drop unencrypted frames.
|
|
*/
|
|
vap->iv_stats.is_rx_unencrypted++;
|
|
IEEE80211_NODE_STAT(ni, rx_unencrypted);
|
|
goto out;
|
|
}
|
|
}
|
|
/* XXX require HT? */
|
|
if (qos & IEEE80211_QOS_AMSDU) {
|
|
m = ieee80211_decap_amsdu(ni, m);
|
|
if (m == NULL)
|
|
return IEEE80211_FC0_TYPE_DATA;
|
|
} else {
|
|
#ifdef IEEE80211_SUPPORT_SUPERG
|
|
m = ieee80211_decap_fastframe(vap, ni, m);
|
|
if (m == NULL)
|
|
return IEEE80211_FC0_TYPE_DATA;
|
|
#endif
|
|
}
|
|
if (dir == IEEE80211_FC1_DIR_DSTODS && ni->ni_wdsvap != NULL)
|
|
ieee80211_deliver_data(ni->ni_wdsvap, ni, m);
|
|
else
|
|
ieee80211_deliver_data(vap, ni, m);
|
|
return IEEE80211_FC0_TYPE_DATA;
|
|
|
|
case IEEE80211_FC0_TYPE_MGT:
|
|
vap->iv_stats.is_rx_mgmt++;
|
|
IEEE80211_NODE_STAT(ni, rx_mgmt);
|
|
if (dir != IEEE80211_FC1_DIR_NODS) {
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
|
|
wh, "data", "incorrect dir 0x%x", dir);
|
|
vap->iv_stats.is_rx_wrongdir++;
|
|
goto err;
|
|
}
|
|
if (m->m_pkthdr.len < sizeof(struct ieee80211_frame)) {
|
|
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
|
|
ni->ni_macaddr, "mgt", "too short: len %u",
|
|
m->m_pkthdr.len);
|
|
vap->iv_stats.is_rx_tooshort++;
|
|
goto out;
|
|
}
|
|
#ifdef IEEE80211_DEBUG
|
|
if ((ieee80211_msg_debug(vap) && doprint(vap, subtype)) ||
|
|
ieee80211_msg_dumppkts(vap)) {
|
|
if_printf(ifp, "received %s from %s rssi %d\n",
|
|
ieee80211_mgt_subtype_name[subtype >>
|
|
IEEE80211_FC0_SUBTYPE_SHIFT],
|
|
ether_sprintf(wh->i_addr2), rssi);
|
|
}
|
|
#endif
|
|
if (wh->i_fc[1] & IEEE80211_FC1_WEP) {
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
|
|
wh, NULL, "%s", "WEP set but not permitted");
|
|
vap->iv_stats.is_rx_mgtdiscard++; /* XXX */
|
|
goto out;
|
|
}
|
|
vap->iv_recv_mgmt(ni, m, subtype, rssi, nf);
|
|
goto out;
|
|
|
|
case IEEE80211_FC0_TYPE_CTL:
|
|
vap->iv_stats.is_rx_ctl++;
|
|
IEEE80211_NODE_STAT(ni, rx_ctrl);
|
|
vap->iv_recv_ctl(ni, m, subtype);
|
|
goto out;
|
|
|
|
default:
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY,
|
|
wh, "bad", "frame type 0x%x", type);
|
|
/* should not come here */
|
|
break;
|
|
}
|
|
err:
|
|
ifp->if_ierrors++;
|
|
out:
|
|
if (m != NULL) {
|
|
if (need_tap && ieee80211_radiotap_active_vap(vap))
|
|
ieee80211_radiotap_rx(vap, m);
|
|
m_freem(m);
|
|
}
|
|
return type;
|
|
}
|
|
|
|
static int
|
|
is11bclient(const uint8_t *rates, const uint8_t *xrates)
|
|
{
|
|
static const uint32_t brates = (1<<2*1)|(1<<2*2)|(1<<11)|(1<<2*11);
|
|
int i;
|
|
|
|
/* NB: the 11b clients we care about will not have xrates */
|
|
if (xrates != NULL || rates == NULL)
|
|
return 0;
|
|
for (i = 0; i < rates[1]; i++) {
|
|
int r = rates[2+i] & IEEE80211_RATE_VAL;
|
|
if (r > 2*11 || ((1<<r) & brates) == 0)
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
static void
|
|
adhoc_recv_mgmt(struct ieee80211_node *ni, struct mbuf *m0,
|
|
int subtype, int rssi, int nf)
|
|
{
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
struct ieee80211com *ic = ni->ni_ic;
|
|
struct ieee80211_frame *wh;
|
|
uint8_t *frm, *efrm, *sfrm;
|
|
uint8_t *ssid, *rates, *xrates;
|
|
|
|
wh = mtod(m0, struct ieee80211_frame *);
|
|
frm = (uint8_t *)&wh[1];
|
|
efrm = mtod(m0, uint8_t *) + m0->m_len;
|
|
switch (subtype) {
|
|
case IEEE80211_FC0_SUBTYPE_PROBE_RESP:
|
|
case IEEE80211_FC0_SUBTYPE_BEACON: {
|
|
struct ieee80211_scanparams scan;
|
|
/*
|
|
* We process beacon/probe response
|
|
* frames to discover neighbors.
|
|
*/
|
|
if (ieee80211_parse_beacon(ni, m0, &scan) != 0)
|
|
return;
|
|
/*
|
|
* Count frame now that we know it's to be processed.
|
|
*/
|
|
if (subtype == IEEE80211_FC0_SUBTYPE_BEACON) {
|
|
vap->iv_stats.is_rx_beacon++; /* XXX remove */
|
|
IEEE80211_NODE_STAT(ni, rx_beacons);
|
|
} else
|
|
IEEE80211_NODE_STAT(ni, rx_proberesp);
|
|
/*
|
|
* If scanning, just pass information to the scan module.
|
|
*/
|
|
if (ic->ic_flags & IEEE80211_F_SCAN) {
|
|
if (ic->ic_flags_ext & IEEE80211_FEXT_PROBECHAN) {
|
|
/*
|
|
* Actively scanning a channel marked passive;
|
|
* send a probe request now that we know there
|
|
* is 802.11 traffic present.
|
|
*
|
|
* XXX check if the beacon we recv'd gives
|
|
* us what we need and suppress the probe req
|
|
*/
|
|
ieee80211_probe_curchan(vap, 1);
|
|
ic->ic_flags_ext &= ~IEEE80211_FEXT_PROBECHAN;
|
|
}
|
|
ieee80211_add_scan(vap, &scan, wh, subtype, rssi, nf);
|
|
return;
|
|
}
|
|
if (scan.capinfo & IEEE80211_CAPINFO_IBSS) {
|
|
if (!IEEE80211_ADDR_EQ(wh->i_addr2, ni->ni_macaddr)) {
|
|
/*
|
|
* Create a new entry in the neighbor table.
|
|
*/
|
|
ni = ieee80211_add_neighbor(vap, wh, &scan);
|
|
} else if (ni->ni_capinfo == 0) {
|
|
/*
|
|
* Update faked node created on transmit.
|
|
* Note this also updates the tsf.
|
|
*/
|
|
ieee80211_init_neighbor(ni, wh, &scan);
|
|
} else {
|
|
/*
|
|
* Record tsf for potential resync.
|
|
*/
|
|
memcpy(ni->ni_tstamp.data, scan.tstamp,
|
|
sizeof(ni->ni_tstamp));
|
|
}
|
|
if (ni != NULL) {
|
|
IEEE80211_RSSI_LPF(ni->ni_avgrssi, rssi);
|
|
ni->ni_noise = nf;
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
|
|
case IEEE80211_FC0_SUBTYPE_PROBE_REQ:
|
|
if (vap->iv_state != IEEE80211_S_RUN) {
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
|
|
wh, NULL, "wrong state %s",
|
|
ieee80211_state_name[vap->iv_state]);
|
|
vap->iv_stats.is_rx_mgtdiscard++;
|
|
return;
|
|
}
|
|
if (IEEE80211_IS_MULTICAST(wh->i_addr2)) {
|
|
/* frame must be directed */
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
|
|
wh, NULL, "%s", "not unicast");
|
|
vap->iv_stats.is_rx_mgtdiscard++; /* XXX stat */
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* prreq frame format
|
|
* [tlv] ssid
|
|
* [tlv] supported rates
|
|
* [tlv] extended supported rates
|
|
*/
|
|
ssid = rates = xrates = NULL;
|
|
sfrm = frm;
|
|
while (efrm - frm > 1) {
|
|
IEEE80211_VERIFY_LENGTH(efrm - frm, frm[1] + 2, return);
|
|
switch (*frm) {
|
|
case IEEE80211_ELEMID_SSID:
|
|
ssid = frm;
|
|
break;
|
|
case IEEE80211_ELEMID_RATES:
|
|
rates = frm;
|
|
break;
|
|
case IEEE80211_ELEMID_XRATES:
|
|
xrates = frm;
|
|
break;
|
|
}
|
|
frm += frm[1] + 2;
|
|
}
|
|
IEEE80211_VERIFY_ELEMENT(rates, IEEE80211_RATE_MAXSIZE, return);
|
|
if (xrates != NULL)
|
|
IEEE80211_VERIFY_ELEMENT(xrates,
|
|
IEEE80211_RATE_MAXSIZE - rates[1], return);
|
|
IEEE80211_VERIFY_ELEMENT(ssid, IEEE80211_NWID_LEN, return);
|
|
IEEE80211_VERIFY_SSID(vap->iv_bss, ssid, return);
|
|
if ((vap->iv_flags & IEEE80211_F_HIDESSID) && ssid[1] == 0) {
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
|
|
wh, NULL,
|
|
"%s", "no ssid with ssid suppression enabled");
|
|
vap->iv_stats.is_rx_ssidmismatch++; /*XXX*/
|
|
return;
|
|
}
|
|
|
|
/* XXX find a better class or define it's own */
|
|
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_INPUT, wh->i_addr2,
|
|
"%s", "recv probe req");
|
|
/*
|
|
* Some legacy 11b clients cannot hack a complete
|
|
* probe response frame. When the request includes
|
|
* only a bare-bones rate set, communicate this to
|
|
* the transmit side.
|
|
*/
|
|
ieee80211_send_proberesp(vap, wh->i_addr2,
|
|
is11bclient(rates, xrates) ? IEEE80211_SEND_LEGACY_11B : 0);
|
|
break;
|
|
|
|
case IEEE80211_FC0_SUBTYPE_ACTION:
|
|
case IEEE80211_FC0_SUBTYPE_ACTION_NOACK:
|
|
if (ni == vap->iv_bss) {
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
|
|
wh, NULL, "%s", "unknown node");
|
|
vap->iv_stats.is_rx_mgtdiscard++;
|
|
} else if (!IEEE80211_ADDR_EQ(vap->iv_myaddr, wh->i_addr1) &&
|
|
!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
|
|
wh, NULL, "%s", "not for us");
|
|
vap->iv_stats.is_rx_mgtdiscard++;
|
|
} else if (vap->iv_state != IEEE80211_S_RUN) {
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
|
|
wh, NULL, "wrong state %s",
|
|
ieee80211_state_name[vap->iv_state]);
|
|
vap->iv_stats.is_rx_mgtdiscard++;
|
|
} else {
|
|
if (ieee80211_parse_action(ni, m0) == 0)
|
|
(void)ic->ic_recv_action(ni, wh, frm, efrm);
|
|
}
|
|
break;
|
|
|
|
case IEEE80211_FC0_SUBTYPE_ASSOC_REQ:
|
|
case IEEE80211_FC0_SUBTYPE_ASSOC_RESP:
|
|
case IEEE80211_FC0_SUBTYPE_REASSOC_REQ:
|
|
case IEEE80211_FC0_SUBTYPE_REASSOC_RESP:
|
|
case IEEE80211_FC0_SUBTYPE_ATIM:
|
|
case IEEE80211_FC0_SUBTYPE_DISASSOC:
|
|
case IEEE80211_FC0_SUBTYPE_AUTH:
|
|
case IEEE80211_FC0_SUBTYPE_DEAUTH:
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
|
|
wh, NULL, "%s", "not handled");
|
|
vap->iv_stats.is_rx_mgtdiscard++;
|
|
break;
|
|
|
|
default:
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY,
|
|
wh, "mgt", "subtype 0x%x not handled", subtype);
|
|
vap->iv_stats.is_rx_badsubtype++;
|
|
break;
|
|
}
|
|
}
|
|
#undef IEEE80211_VERIFY_LENGTH
|
|
#undef IEEE80211_VERIFY_ELEMENT
|
|
|
|
static void
|
|
ahdemo_recv_mgmt(struct ieee80211_node *ni, struct mbuf *m0,
|
|
int subtype, int rssi, int nf)
|
|
{
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
struct ieee80211com *ic = ni->ni_ic;
|
|
struct ieee80211_frame *wh;
|
|
|
|
/*
|
|
* Process management frames when scanning; useful for doing
|
|
* a site-survey.
|
|
*/
|
|
if (ic->ic_flags & IEEE80211_F_SCAN)
|
|
adhoc_recv_mgmt(ni, m0, subtype, rssi, nf);
|
|
else {
|
|
wh = mtod(m0, struct ieee80211_frame *);
|
|
switch (subtype) {
|
|
case IEEE80211_FC0_SUBTYPE_ASSOC_REQ:
|
|
case IEEE80211_FC0_SUBTYPE_ASSOC_RESP:
|
|
case IEEE80211_FC0_SUBTYPE_REASSOC_REQ:
|
|
case IEEE80211_FC0_SUBTYPE_REASSOC_RESP:
|
|
case IEEE80211_FC0_SUBTYPE_PROBE_REQ:
|
|
case IEEE80211_FC0_SUBTYPE_PROBE_RESP:
|
|
case IEEE80211_FC0_SUBTYPE_BEACON:
|
|
case IEEE80211_FC0_SUBTYPE_ATIM:
|
|
case IEEE80211_FC0_SUBTYPE_DISASSOC:
|
|
case IEEE80211_FC0_SUBTYPE_AUTH:
|
|
case IEEE80211_FC0_SUBTYPE_DEAUTH:
|
|
case IEEE80211_FC0_SUBTYPE_ACTION:
|
|
case IEEE80211_FC0_SUBTYPE_ACTION_NOACK:
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
|
|
wh, NULL, "%s", "not handled");
|
|
vap->iv_stats.is_rx_mgtdiscard++;
|
|
break;
|
|
default:
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY,
|
|
wh, "mgt", "subtype 0x%x not handled", subtype);
|
|
vap->iv_stats.is_rx_badsubtype++;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
adhoc_recv_ctl(struct ieee80211_node *ni, struct mbuf *m, int subtype)
|
|
{
|
|
|
|
switch (subtype) {
|
|
case IEEE80211_FC0_SUBTYPE_BAR:
|
|
ieee80211_recv_bar(ni, m);
|
|
break;
|
|
}
|
|
}
|