hardenedbsd/HardenedBSD
1
0
Fork 0
mirror of https://git.hardenedbsd.org/hardenedbsd/HardenedBSD.git synced 2024-11-18 17:00:49 +01:00
Code Issues Actions Packages Projects Releases Wiki Activity
d230622648
HardenedBSD/sys/kern/subr_trap.c
David Greenman d230622648 New interrupt code from Bruce Evans. In additional to Bruce's attached 
list of changes, I've made the following additional changes:

1) i386/include/ipl.h renamed to spl.h as the name conflicts with the
   file of the same name in i386/isa/ipl.h.
2) changed all use of *mask (i.e. netmask, biomask, ttymask, etc) to
   *_imask (net_imask, etc).
3) changed vestige of splnet use in if_is to splimp.
4) got rid of "impmask" completely (Bruce had gotten rid of netmask),
   and are now using net_imask instead.
5) dozens of minor cruft to glue in Bruce's changes.

   These require changes I made to config(8) as well, and thus it must
be rebuilt.

-DG

from Bruce Evans:

sio:
	o No diff is supplied.  Remove the define of setsofttty().  I hope
	  that is enough.

*.s:
	o i386/isa/debug.h no longer exists.  The event counters became too
	  much trouble to maintain.  All function call entry and exception
	  entry counters can be recovered by using profiling kernel (the new
	  profiling supports all entry points; however, it is too slow to
	  leave enabled all the time; it also).  Only BDBTRAP() from debug.h
	  is now used.  That is moved to exception.s.  It might be worth
	  preserving SHOW_BITS() and calling it from _mcount() (if enabled).
	o T_ASTFLT is now only set just before calling trap().
	o All exception handlers set SWI_AST_MASK in cpl as soon as possible
	  after entry and arrange for _doreti to restore it atomically with
	  exiting.  It is not possible to set it atomically with entering
	  the kernel, so it must be checked against the user mode bits in
	  the trap frame before committing to using it.  There is no place
	  to store the old value of cpl for syscalls or traps, so there are
	  some complications restoring it.

Profiling stuff (mostly in *.s):
	o Changes to kern/subr_mcount.c, gcc and gprof are not supplied yet.
	o All interesting labels `foo' are renamed `_foo' and all
	  uninteresting labels `_bar' are renamed `bar'.  A small change
	  to gprof allows ignoring labels not starting with underscores.
	o MCOUNT_LABEL() is to provide names for counters for times spent
	  in exception handlers.
	o FAKE_MCOUNT() is a version of MCOUNT() suitable for exception
	  handlers.  Its arg is the pc where the exception occurred.  The
	  new mcount() pretends that this was a call from that pc to a
	  suitable MCOUNT_LABEL().
	o MEXITCOUNT is to turn off any timer started by MCOUNT().

/usr/src/sys/i386/i386/exception.s:
	o The non-BDB BPTTRAP() macros were doing a sti even when interrupts
	  were disabled when the trap occurred.  The sti (fixed) sti is
	  actually a no-op unless you have my changes to machdep.c that make
	  the debugger trap gates interrupt gates, but fixing that would
	  make the ifdefs messier.  ddb seems to be unharmed by both
	  interrupts always disabled and always enabled (I had the branch in
	  the fix back to front for some time :-().
	o There is no known pushal bug.
	o tf_err can be left as garbage for syscalls.

/usr/src/sys/i386/i386/locore.s:
	o Fix and update BDE_DEBUGGER support.
	o ENTRY(btext) before initialization was dangerous.
	o Warm boot shot was longer than intended.

/usr/src/sys/i386/i386/machdep.c:
	o DON'T APPLY ALL OF THIS DIFF.  It's what I'm using, but may require
	  other changes.
	  Use the following:
		o Remove aston() and setsoftclock().
	  Maybe use the following:
		o No netisr.h.
		o Spelling fix.
		o Delay to read the Rebooting message.
		o Fix for vm system unmapping a reduced area of memory
		  after bounds_check_with_label() reduces the size of
		  a physical i/o for a partition boundary.  A similar
		  fix is required in kern_physio.c.
		o Correct use of __CONCAT.  It never worked here for non-
		  ANSI cpp's.  Is it time to drop support for non-ANSI?
		o gdt_segs init.  0xffffffffUL is bogus because ssd_limit
		  is not 32 bits.  The replacement may have the same
		  value :-), but is more natural.
		o physmem was one page too low.  Confusing variable names.
	  Don't use the following:
		o Better numbers of buffers.  Each 8K page requires up to
		  16 buffer headers.  On my system, this results in 5576
		  buffers containing [up to] 2854912 bytes of memory.
		  The usual allocation of about 384 buffers only holds
		  192K of disk if you use it on an fs with a block size
		  of 512.
		o gdt changes for bdb.
		o *TGT -> *IDT changes for bdb.
		o #ifdefed changes for bdb.

/usr/src/sys/i386/i386/microtime.s:
	o Use the correct asm macros.  I think asm.h was copied from Mach
	  just for microtime and isn't used now.  It certainly doesn't
	  belong in <sys>.  Various macros are also duplicated in
	  sys/i386/boot.h and libc/i386/*.h.
	o Don't switch to and from the IRR; it is guaranteed to be selected
	  (default after ICU init and explicitly selected in isa.c too, and
	  never changed until the old microtime clobbered it).

/usr/src/sys/i386/i386/support.s:
	o Non-essential changes (none related to spls or profiling).
	o Removed slow loads of %gs again.  The LDT support may require
	  not relying on %gs, but loading it is not the way to fix it!
	  Some places (copyin ...) forgot to load it.  Loading it clobbers
	  the user %gs.  trap() still loads it after certain types of
	  faults so that fuword() etc can rely on it without loading it
	  explicitly.  Exception handlers don't restore it.  If we want
	  to preserve the user %gs, then the fastest method is to not
	  touch it except for context switches.  Comparing with
	  VM_MAXUSER_ADDRESS and branching takes only 2 or 4 cycles on
	  a 486, while loading %gs takes 9 cycles and using it takes
	  another.
	o Fixed a signed branch to unsigned.

/usr/src/sys/i386/i386/swtch.s:
	o Move spl0() outside of idle loop.
	o Remove cli/sti from idle loop.  sw1 does a cli, and in the
	  unlikely event of an interrupt occurring and whichqs becoming
	  zero, sw1 will just jump back to _idle.
	o There's no spl0() function in asm any more, so use splz().
	o swtch() doesn't need to be superaligned, at least with the
	  new mcounting.
	o Fixed a signed branch to unsigned.
	o Removed astoff().

/usr/src/sys/i386/i386/trap.c:
	o The decentralized extern decls were inconsistent, of course.
	o Fixed typo MATH_EMULTATE in comments. */
	o Removed unused variables.
	o Old netmask is now impmask; print it instead.  Perhaps we
	  should print some of the new masks.
	o BTW, trap() should not print anything for normal debugger
	  traps.

/usr/src/sys/i386/include/asmacros.h:
	o DON'T APPLY ALL OF THIS DIFF.  Just use some of the null macros
	  as necessary.

/usr/src/sys/i386/include/cpu.h:
	o CLKF_BASEPRI() changes since cpl == SWI_AST_MASK is now normal
	  while the kernel is running.
	o Don't use var++ to set boolean variables.  It fails after a mere
	  4G times :-) and is slower than storing a constant on [3-4]86s.

/usr/src/sys/i386/include/cpufunc.h:
	o DON'T APPLY ALL OF THIS DIFF.  You need mainly the include of
	  <machine/ipl.h>.  Unfortunately, <machine/ipl.h> is needed by
	  almost everything for the inlines.

/usr/src/sys/i386/include/ipl.h:
	o New file.  Defines spl inlines and SWI macros and declares most
	  variables related to hard and soft interrupt masks.

/usr/src/sys/i386/isa/icu.h:
	o Moved definitions to <machine/ipl.h>

/usr/src/sys/i386/isa/icu.s:
	o Software interrupts (SWIs) and delayed hardware interrupts (HWIs)
	  are now handled uniformally, and dispatching them from splx() is
	  more like dispatching them from _doreti.  The dispatcher is
	  essentially *(handler[ffs(ipending & ~cpl)]().
	o More care (not quite enough) is taken to avoid unbounded nesting
	  of interrupts.
	o The interface to softclock() is changed so that a trap frame is
	  not required.
	o Fast interrupt handlers are now handled more uniformally.
	  Configuration is still too early (new handlers would require
	  bits in <machine/ipl.h> and functions to vector.s).
	o splnnn() and splx() are no longer here; they are inline functions
	  (could be macros for other compilers).  splz() is the nontrivial
	  part of the old splx().

/usr/src/sys/i386/isa/ipl.h
	o New file.  Supposed to have only bus-dependent stuff.  Perhaps
	  the h/w masks should be declared here.

/usr/src/sys/i386/isa/isa.c:
	o DON'T APPLY ALL OF THIS DIFF.  You need only things involving
	  *mask and *MASK and comments about them.  netmask is now a pure
	  software mask.  It works like the softclock mask.

/usr/src/sys/i386/isa/vector.s:
	o Reorganize AUTO_EOI* macros.
	o Option FAST_INTR_HANDLER_USERS_ES for people who don't trust
	  fastintr handlers.
	o fastintr handlers need to metamorphose into ordinary interrupt
	  handlers if their SWI bit has become set.  Previously, sio had
	  unintended latency for handling output completions and input
	  of SLIP framing characters because this was not done.

/usr/src/sys/net/netisr.h:
	o The machine-dependent stuff is now imported from <machine/ipl.h>.

/usr/src/sys/sys/systm.h
	o DON'T APPLY ALL OF THIS DIFF.  You need mainly the different
	  splx() prototype.  The spl*() prototypes are duplicated as
	  inlines in <machine/ipl.h> but they need to be duplicated here
	  in case there are no inlines.  I sent systm.h and cpufunc.h
	  to Garrett.  We agree that spl0 should be replaced by splnone
	  and not the other way around like I've done.

/usr/src/sys/kern/kern_clock.c
	o splsoftclock() now lowers cpl so the direct call to softclock()
	  works as intended.
	o softclock() interface changed to avoid passing the whole frame
	  (some machines may need another change for profile_tick()).
	o profiling renamed _profiling to avoid ANSI namespace pollution.
	  (I had to improve the mcount() interface and may as well fix it.)
	  The GUPROF variant doesn't actually reference profiling here,
	  but the 'U' in GUPROF should mean to select the microtimer
	  mcount() and not change the interface.
1994-04-02 07:00:53 +00:00

711 lines
17 KiB
C
Raw Blame History

/*-
* Copyright (c) 1990 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* the University of Utah, and William Jolitz.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: @(#)trap.c 7.4 (Berkeley) 5/13/91
* $Id: trap.c,v 1.20 1994/03/24 23:12:34 davidg Exp $
*/
/*
* 386 Trap and System call handleing
*/
#include "isa.h"
#include "npx.h"
#include "ddb.h"
#include "machine/cpu.h"
#include "machine/psl.h"
#include "machine/reg.h"
#include "machine/eflags.h"
#include "param.h"
#include "systm.h"
#include "proc.h"
#include "user.h"
#include "acct.h"
#include "kernel.h"
#ifdef KTRACE
#include "ktrace.h"
#endif
#include "vm/vm_param.h"
#include "vm/pmap.h"
#include "vm/vm_map.h"
#include "vm/vm_user.h"
#include "vm/vm_page.h"
#include "sys/vmmeter.h"
#include "machine/trap.h"
#ifdef __GNUC__
/*
* The "r" contraint could be "rm" except for fatal bugs in gas. As usual,
* we omit the size from the mov instruction to avoid nonfatal bugs in gas.
*/
#define read_gs() ({ u_short gs; __asm("mov %%gs,%0" : "=r" (gs)); gs; })
#define write_gs(newgs) __asm("mov %0,%%gs" : : "r" ((u_short) newgs))
#else /* not __GNUC__ */
u_short read_gs __P((void));
void write_gs __P((/* promoted u_short */ int gs));
#endif /* __GNUC__ */
extern int grow(struct proc *,int);
struct sysent sysent[];
int nsysent;
#define MAX_TRAP_MSG 27
char *trap_msg[] = {
"reserved addressing fault", /* 0 T_RESADFLT */
"privileged instruction fault", /* 1 T_PRIVINFLT */
"reserved operand fault", /* 2 T_RESOPFLT */
"breakpoint instruction fault", /* 3 T_BPTFLT */
"", /* 4 unused */
"system call trap", /* 5 T_SYSCALL */
"arithmetic trap", /* 6 T_ARITHTRAP */
"system forced exception", /* 7 T_ASTFLT */
"segmentation (limit) fault", /* 8 T_SEGFLT */
"protection fault", /* 9 T_PROTFLT */
"trace trap", /* 10 T_TRCTRAP */
"", /* 11 unused */
"page fault", /* 12 T_PAGEFLT */
"page table fault", /* 13 T_TABLEFLT */
"alignment fault", /* 14 T_ALIGNFLT */
"kernel stack pointer not valid", /* 15 T_KSPNOTVAL */
"bus error", /* 16 T_BUSERR */
"kernel debugger fault", /* 17 T_KDBTRAP */
"integer divide fault", /* 18 T_DIVIDE */
"non-maskable interrupt trap", /* 19 T_NMI */
"overflow trap", /* 20 T_OFLOW */
"FPU bounds check fault", /* 21 T_BOUND */
"FPU device not available", /* 22 T_DNA */
"double fault", /* 23 T_DOUBLEFLT */
"FPU operand fetch fault", /* 24 T_FPOPFLT */
"invalid TSS fault", /* 25 T_TSSFLT */
"segment not present fault", /* 26 T_SEGNPFLT */
"stack fault", /* 27 T_STKFLT */
};
#define pde_v(v) (PTD[((v)>>PD_SHIFT)&1023].pd_v)
/*
* trap(frame):
* Exception, fault, and trap interface to BSD kernel. This
* common code is called from assembly language IDT gate entry
* routines that prepare a suitable stack frame, and restore this
* frame after the exception has been processed. Note that the
* effect is as if the arguments were passed call by reference.
*/
/*ARGSUSED*/
void
trap(frame)
struct trapframe frame;
{
register int i;
register struct proc *p = curproc;
struct timeval syst;
int ucode, type, code, eva, fault_type;
frame.tf_eflags &= ~PSL_NT; /* clear nested trap XXX */
type = frame.tf_trapno;
#if NDDB > 0
if (curpcb && curpcb->pcb_onfault) {
if (frame.tf_trapno == T_BPTFLT
|| frame.tf_trapno == T_TRCTRAP)
if (kdb_trap (type, 0, &frame))
return;
}
#endif
if (curpcb == 0 || curproc == 0)
goto skiptoswitch;
if (curpcb->pcb_onfault && frame.tf_trapno != T_PAGEFLT) {
extern int _udatasel;
if (read_gs() != (u_short) _udatasel)
/*
* Some user has corrupted %gs but we depend on it in
* copyout() etc. Fix it up and retry.
*
* (We don't preserve %fs or %gs, so users can change
* them to either _ucodesel, _udatasel or a not-present
* selector, possibly ORed with 0 to 3, making them
* volatile for other users. Not preserving them saves
* time and doesn't lose functionality or open security
* holes.)
*/
write_gs(_udatasel);
else
copyfault:
frame.tf_eip = (int)curpcb->pcb_onfault;
return;
}
syst = p->p_stime;
if (ISPL(frame.tf_cs) == SEL_UPL) {
type |= T_USER;
p->p_regs = (int *)&frame;
}
skiptoswitch:
ucode=0;
eva = rcr2();
code = frame.tf_err;
if ((type & ~T_USER) == T_PAGEFLT)
goto pfault;
switch (type) {
case T_SEGNPFLT|T_USER:
case T_STKFLT|T_USER:
case T_PROTFLT|T_USER: /* protection fault */
ucode = code + BUS_SEGM_FAULT ;
i = SIGBUS;
break;
case T_PRIVINFLT|T_USER: /* privileged instruction fault */
case T_RESADFLT|T_USER: /* reserved addressing fault */
case T_RESOPFLT|T_USER: /* reserved operand fault */
case T_FPOPFLT|T_USER: /* coprocessor operand fault */
ucode = type &~ T_USER;
i = SIGILL;
break;
case T_ASTFLT|T_USER: /* Allow process switch */
astoff();
cnt.v_soft++;
if ((p->p_flag & SOWEUPC) && p->p_stats->p_prof.pr_scale) {
addupc(frame.tf_eip, &p->p_stats->p_prof, 1);
p->p_flag &= ~SOWEUPC;
}
goto out;
case T_DNA|T_USER:
#if NNPX > 0
/* if a transparent fault (due to context switch "late") */
if (npxdna()) return;
#endif /* NNPX > 0 */
#ifdef MATH_EMULATE
i = math_emulate(&frame);
if (i == 0) return;
#else /* MATH_EMULATE */
panic("trap: math emulation necessary!");
#endif /* MATH_EMULATE */
ucode = FPE_FPU_NP_TRAP;
break;
case T_BOUND|T_USER:
ucode = FPE_SUBRNG_TRAP;
i = SIGFPE;
break;
case T_OFLOW|T_USER:
ucode = FPE_INTOVF_TRAP;
i = SIGFPE;
break;
case T_DIVIDE|T_USER:
ucode = FPE_INTDIV_TRAP;
i = SIGFPE;
break;
case T_ARITHTRAP|T_USER:
ucode = code;
i = SIGFPE;
break;
pfault:
case T_PAGEFLT: /* allow page faults in kernel mode */
case T_PAGEFLT|T_USER: /* page fault */
{
vm_offset_t va;
struct vmspace *vm;
vm_map_t map = 0;
int rv = 0, oldflags;
vm_prot_t ftype;
unsigned v;
extern vm_map_t kernel_map;
va = trunc_page((vm_offset_t)eva);
/*
* Don't allow user-mode faults in kernel address space
*/
if ((type == (T_PAGEFLT|T_USER)) && (va >= KERNBASE)) {
goto nogo;
}
if ((p == 0) || (type == T_PAGEFLT && va >= KERNBASE)) {
vm = 0;
map = kernel_map;
} else {
vm = p->p_vmspace;
map = &vm->vm_map;
}
if (code & PGEX_W)
ftype = VM_PROT_READ | VM_PROT_WRITE;
else
ftype = VM_PROT_READ;
oldflags = p->p_flag;
if (map != kernel_map) {
vm_offset_t pa;
vm_offset_t v = (vm_offset_t) vtopte(va);
vm_page_t ptepg;
/*
* Keep swapout from messing with us during this
* critical time.
*/
p->p_flag |= SLOCK;
/*
* Grow the stack if necessary
*/
if ((caddr_t)va > vm->vm_maxsaddr
&& (caddr_t)va < (caddr_t)USRSTACK) {
if (!grow(p, va)) {
rv = KERN_FAILURE;
p->p_flag &= ~SLOCK;
p->p_flag |= (oldflags & SLOCK);
goto nogo;
}
}
/*
* Check if page table is mapped, if not,
* fault it first
*/
/* Fault the pte only if needed: */
*(volatile char *)v += 0;
ptepg = (vm_page_t) pmap_pte_vm_page(vm_map_pmap(map), v);
vm_page_hold(ptepg);
/* Fault in the user page: */
rv = vm_fault(map, va, ftype, FALSE);
vm_page_unhold(ptepg);
/*
* page table pages don't need to be kept if they
* are not held
*/
if( ptepg->hold_count == 0 && ptepg->wire_count == 0) {
pmap_page_protect( VM_PAGE_TO_PHYS(ptepg),
VM_PROT_NONE);
if( ptepg->flags & PG_CLEAN)
vm_page_free(ptepg);
}
p->p_flag &= ~SLOCK;
p->p_flag |= (oldflags & SLOCK);
} else {
/*
* Since we know that kernel virtual address addresses
* always have pte pages mapped, we just have to fault
* the page.
*/
rv = vm_fault(map, va, ftype, FALSE);
}
if (rv == KERN_SUCCESS) {
if (type == T_PAGEFLT)
return;
goto out;
}
nogo:
if (type == T_PAGEFLT) {
if (curpcb->pcb_onfault)
goto copyfault;
goto we_re_toast;
}
i = (rv == KERN_PROTECTION_FAILURE) ? SIGBUS : SIGSEGV;
/* kludge to pass faulting virtual address to sendsig */
ucode = type &~ T_USER;
frame.tf_err = eva;
break;
}
#if NDDB == 0
case T_TRCTRAP: /* trace trap -- someone single stepping lcall's */
frame.tf_eflags &= ~PSL_T;
/* Q: how do we turn it on again? */
return;
#endif
case T_BPTFLT|T_USER: /* bpt instruction fault */
case T_TRCTRAP|T_USER: /* trace trap */
frame.tf_eflags &= ~PSL_T;
i = SIGTRAP;
break;
#if NISA > 0
case T_NMI:
case T_NMI|T_USER:
#if NDDB > 0
/* NMI can be hooked up to a pushbutton for debugging */
printf ("NMI ... going to debugger\n");
if (kdb_trap (type, 0, &frame))
return;
#endif
/* machine/parity/power fail/"kitchen sink" faults */
if (isa_nmi(code) == 0) return;
/* FALL THROUGH */
#endif
default:
we_re_toast:
fault_type = type & ~T_USER;
if (fault_type <= MAX_TRAP_MSG)
printf("\n\nFatal trap %d: %s while in %s mode\n",
fault_type, trap_msg[fault_type],
ISPL(frame.tf_cs) == SEL_UPL ? "user" : "kernel");
if (fault_type == T_PAGEFLT) {
printf("fault virtual address = 0x%x\n", eva);
printf("fault code = %s %s, %s\n",
code & PGEX_U ? "user" : "supervisor",
code & PGEX_W ? "write" : "read",
code & PGEX_P ? "protection violation" : "page not present");
}
printf("instruction pointer = 0x%x\n", frame.tf_eip);
printf("processor eflags = ");
if (frame.tf_eflags & EFL_TF)
printf("trace/trap, ");
if (frame.tf_eflags & EFL_IF)
printf("interrupt enabled, ");
if (frame.tf_eflags & EFL_NT)
printf("nested task, ");
if (frame.tf_eflags & EFL_RF)
printf("resume, ");
if (frame.tf_eflags & EFL_VM)
printf("vm86, ");
printf("IOPL = %d\n", (frame.tf_eflags & EFL_IOPL) >> 12);
printf("current process = ");
if (curproc) {
printf("%d (%s)\n",
curproc->p_pid, curproc->p_comm ?
curproc->p_comm : "");
} else {
printf("Idle\n");
}
printf("interrupt mask = ");
if ((cpl & net_imask) == net_imask)
printf("net ");
if ((cpl & tty_imask) == tty_imask)
printf("tty ");
if ((cpl & bio_imask) == bio_imask)
printf("bio ");
if (cpl == 0)
printf("none");
printf("\n");
#ifdef KDB
if (kdb_trap(&psl))
return;
#endif
#if NDDB > 0
if (kdb_trap (type, 0, &frame))
return;
#endif
if (fault_type <= MAX_TRAP_MSG)
panic(trap_msg[fault_type]);
else
panic("unknown/reserved trap");
/* NOTREACHED */
}
trapsignal(p, i, ucode);
if ((type & T_USER) == 0)
return;
out:
while (i = CURSIG(p))
psig(i);
p->p_pri = p->p_usrpri;
if (want_resched) {
int s;
/*
* Since we are curproc, clock will normally just change
* our priority without moving us from one queue to another
* (since the running process is not on a queue.)
* If that happened after we setrq ourselves but before we
* swtch()'ed, we might not be on the queue indicated by
* our priority.
*/
s = splclock();
setrq(p);
p->p_stats->p_ru.ru_nivcsw++;
swtch();
splx(s);
while (i = CURSIG(p))
psig(i);
}
if (p->p_stats->p_prof.pr_scale) {
int ticks;
struct timeval *tv = &p->p_stime;
ticks = ((tv->tv_sec - syst.tv_sec) * 1000 +
(tv->tv_usec - syst.tv_usec) / 1000) / (tick / 1000);
if (ticks) {
#ifdef PROFTIMER
extern int profscale;
addupc(frame.tf_eip, &p->p_stats->p_prof,
ticks * profscale);
#else
addupc(frame.tf_eip, &p->p_stats->p_prof, ticks);
#endif
}
}
curpri = p->p_pri;
}
/*
* Compensate for 386 brain damage (missing URKR).
* This is a little simpler than the pagefault handler in trap() because
* it the page tables have already been faulted in and high addresses
* are thrown out early for other reasons.
*/
int trapwrite(addr)
unsigned addr;
{
struct proc *p;
vm_offset_t va, v;
struct vmspace *vm;
int oldflags;
int rv;
va = trunc_page((vm_offset_t)addr);
/*
* XXX - MAX is END. Changed > to >= for temp. fix.
*/
if (va >= VM_MAXUSER_ADDRESS)
return (1);
p = curproc;
vm = p->p_vmspace;
oldflags = p->p_flag;
p->p_flag |= SLOCK;
if ((caddr_t)va >= vm->vm_maxsaddr
&& (caddr_t)va < (caddr_t)USRSTACK) {
if (!grow(p, va)) {
p->p_flag &= ~SLOCK;
p->p_flag |= (oldflags & SLOCK);
return (1);
}
}
v = trunc_page(vtopte(va));
/*
* wire the pte page
*/
if (va < USRSTACK) {
vm_map_pageable(&vm->vm_map, v, round_page(v+1), FALSE);
}
/*
* fault the data page
*/
rv = vm_fault(&vm->vm_map, va, VM_PROT_READ|VM_PROT_WRITE, FALSE);
/*
* unwire the pte page
*/
if (va < USRSTACK) {
vm_map_pageable(&vm->vm_map, v, round_page(v+1), TRUE);
}
p->p_flag &= ~SLOCK;
p->p_flag |= (oldflags & SLOCK);
if (rv != KERN_SUCCESS)
return 1;
return (0);
}
/*
* syscall(frame):
* System call request from POSIX system call gate interface to kernel.
* Like trap(), argument is call by reference.
*/
/*ARGSUSED*/
void
syscall(frame)
volatile struct trapframe frame;
{
register int *locr0 = ((int *)&frame);
register caddr_t params;
register int i;
register struct sysent *callp;
register struct proc *p = curproc;
struct timeval syst;
int error, opc;
int args[8], rval[2];
int code;
#ifdef lint
r0 = 0; r0 = r0; r1 = 0; r1 = r1;
#endif
syst = p->p_stime;
if (ISPL(frame.tf_cs) != SEL_UPL)
panic("syscall");
code = frame.tf_eax;
p->p_regs = (int *)&frame;
params = (caddr_t)frame.tf_esp + sizeof (int) ;
/*
* Reconstruct pc, assuming lcall $X,y is 7 bytes, as it is always.
*/
opc = frame.tf_eip - 7;
if (code == 0) {
code = fuword(params);
params += sizeof (int);
}
if (code < 0 || code >= nsysent)
callp = &sysent[0];
else
callp = &sysent[code];
if ((i = callp->sy_narg * sizeof (int)) &&
(error = copyin(params, (caddr_t)args, (u_int)i))) {
frame.tf_eax = error;
frame.tf_eflags |= PSL_C; /* carry bit */
#ifdef KTRACE
if (KTRPOINT(p, KTR_SYSCALL))
ktrsyscall(p->p_tracep, code, callp->sy_narg, args);
#endif
goto done;
}
#ifdef KTRACE
if (KTRPOINT(p, KTR_SYSCALL))
ktrsyscall(p->p_tracep, code, callp->sy_narg, args);
#endif
rval[0] = 0;
rval[1] = frame.tf_edx;
/*pg("%d. s %d\n", p->p_pid, code);*/
error = (*callp->sy_call)(p, args, rval);
if (error == ERESTART)
frame.tf_eip = opc;
else if (error != EJUSTRETURN) {
if (error) {
/*pg("error %d", error);*/
frame.tf_eax = error;
frame.tf_eflags |= PSL_C; /* carry bit */
} else {
frame.tf_eax = rval[0];
frame.tf_edx = rval[1];
frame.tf_eflags &= ~PSL_C; /* carry bit */
}
}
/* else if (error == EJUSTRETURN) */
/* nothing to do */
done:
/*
* Reinitialize proc pointer `p' as it may be different
* if this is a child returning from fork syscall.
*/
p = curproc;
while (i = CURSIG(p))
psig(i);
p->p_pri = p->p_usrpri;
if (want_resched) {
int s;
/*
* Since we are curproc, clock will normally just change
* our priority without moving us from one queue to another
* (since the running process is not on a queue.)
* If that happened after we setrq ourselves but before we
* swtch()'ed, we might not be on the queue indicated by
* our priority.
*/
s = splclock();
setrq(p);
p->p_stats->p_ru.ru_nivcsw++;
swtch();
splx(s);
while (i = CURSIG(p))
psig(i);
}
if (p->p_stats->p_prof.pr_scale) {
int ticks;
struct timeval *tv = &p->p_stime;
ticks = ((tv->tv_sec - syst.tv_sec) * 1000 +
(tv->tv_usec - syst.tv_usec) / 1000) / (tick / 1000);
if (ticks) {
#ifdef PROFTIMER
extern int profscale;
addupc(frame.tf_eip, &p->p_stats->p_prof,
ticks * profscale);
#else
addupc(frame.tf_eip, &p->p_stats->p_prof, ticks);
#endif
}
}
curpri = p->p_pri;
#ifdef KTRACE
if (KTRPOINT(p, KTR_SYSRET))
ktrsysret(p->p_tracep, code, error, rval[0]);
#endif
#ifdef DIAGNOSTICx
{ extern int _udatasel, _ucodesel;
if (frame.tf_ss != _udatasel)
printf("ss %x call %d\n", frame.tf_ss, code);
if ((frame.tf_cs&0xffff) != _ucodesel)
printf("cs %x call %d\n", frame.tf_cs, code);
if (frame.tf_eip > VM_MAXUSER_ADDRESS) {
printf("eip %x call %d\n", frame.tf_eip, code);
frame.tf_eip = 0;
}
}
#endif
}
Reference in New Issue View Git Blame Copy Permalink