HardenedBSD/sys/conf/Makefile.powerpc
Peter Wemm 6c205e59db Delete the 'device-driver' suffix. It's been meaningless for a long time.
On the VAX, it used to be used for special compilation to avoid the
optimizer which would mess with memory mapped devices etc.  These days
we use 'volatile'.
1999-07-03 19:19:34 +00:00

286 lines
7.4 KiB
Makefile

# Makefile.i386 -- with config changes.
# Copyright 1990 W. Jolitz
# from: @(#)Makefile.i386 7.1 5/10/91
# $Id: Makefile.i386,v 1.157 1999/07/02 04:00:01 jkh Exp $
#
# Makefile for FreeBSD
#
# This makefile is constructed from a machine description:
# config machineid
# Most changes should be made in the machine description
# /sys/i386/conf/``machineid''
# after which you should do
# config machineid
# Generic makefile changes should be made in
# /sys/i386/conf/Makefile.i386
# after which config should be rerun for all machines.
#
# Which version of config(8) is required.
%VERSREQ= 400016
# Can be overridden by makeoptions or /etc/make.conf
KERNEL?= kernel
KERNFORMAT?= elf
STD8X16FONT?= iso
.if exists(./@/.)
S= ./@
.else
S= ../..
.endif
I386= ${S}/i386
COPTFLAGS?=-O
INCLUDES= -nostdinc -I- -I. -I$S
# This hack is to allow kernel compiles to succeed on machines w/out srcdist
.if exists($S/../include)
INCLUDES+= -I$S/../include
.else
INCLUDES+= -I/usr/include
.endif
COPTS= ${INCLUDES} ${IDENT} -DKERNEL -include opt_global.h
CFLAGS= ${COPTFLAGS} ${CWARNFLAGS} ${DEBUG} ${COPTS}
# XXX LOCORE means "don't declare C stuff" not "for locore.s".
ASM_CFLAGS= -x assembler-with-cpp -DLOCORE ${CFLAGS}
# Use the default object format for genassym, etc.
GEN_CFLAGS= ${COPTFLAGS} ${CWARNFLAGS} ${DEBUG} ${COPTS} -UKERNEL
# Select the correct set of tools. Can't set OBJFORMAT here because it
# doesn't get exported into the environment, and if it were exported
# then it might break building of genassym, etc.
.if ${KERNFORMAT} == "elf"
CFLAGS+= -elf
.else
CFLAGS+= -aout
.endif
LOAD_ADDRESS?= C0100000
DEFINED_PROF= ${PROF}
.if defined(PROF)
CFLAGS+= -malign-functions=4
.if ${PROFLEVEL} >= 2
IDENT+= -DGPROF4 -DGUPROF
PROF+= -mprofiler-epilogue
.endif
.endif
NORMAL_C= ${CC} -c ${CFLAGS} ${PROF} $<
NORMAL_C_C= ${CC} -c ${CFLAGS} ${PROF} $<
NORMAL_S= ${CC} -c ${ASM_CFLAGS} $<
PROFILE_C= ${CC} -c ${CFLAGS} $<
GEN_CFILES= ${I386}/i386/genassym.c
# setdef0.c and setdef1.c are intentionally
# omitted from SYSTEM_CFILES. They include setdefs.h, a header which
# is generated from all of ${OBJS}. We don't want to have to compile
# everything just to do a make depend.
SYSTEM_CFILES= ioconf.c param.c vnode_if.c config.c
SYSTEM_SFILES= ${I386}/i386/locore.s
SYSTEM_DEP= Makefile symbols.exclude symbols.sort ${SYSTEM_OBJS}
.if ${CFLAGS:M-g} == ""
SYMORDER_EXCLUDE=-x symbols.exclude
.endif
.if ${KERNFORMAT} == aout || ${KERNFORMAT} == aoutkld
SYSTEM_OBJS= locore.o vnode_if.o ${OBJS} ioconf.o param.o config.o
SYSTEM_LD= @${LD} -aout -Bforcedynamic -Z -T ${LOAD_ADDRESS} -o ${.TARGET} -X ${SYSTEM_OBJS} vers.o
SYSTEM_LD_TAIL= @echo rearranging symbols; \
symorder -m ${SYMORDER_EXCLUDE} symbols.sort ${.TARGET}; \
size -aout ${.TARGET} ; chmod 755 ${.TARGET}
.endif
.if ${KERNFORMAT} == elf
SYSTEM_OBJS= locore.o setdef0.o vnode_if.o ${OBJS} ioconf.o param.o config.o \
setdef1.o hack.So
SYSTEM_LD= @${LD} -elf -Bdynamic -T $S/i386/conf/kernel.script \
-export-dynamic -dynamic-linker /red/herring \
-o ${.TARGET} -X ${SYSTEM_OBJS} vers.o
SYSTEM_LD_TAIL= @size -elf ${.TARGET} ; chmod 755 ${.TARGET}
SYSTEM_DEP+= $S/i386/conf/kernel.script
.endif
%BEFORE_DEPEND
%OBJS
%CFILES
%SFILES
%MFILES
%CLEAN
all: ${KERNEL}
.if !defined(DEBUG)
FULLKERNEL= ${KERNEL}
.else
FULLKERNEL= ${KERNEL}.debug
${KERNEL}: ${FULLKERNEL}
.if ${KERNFORMAT} == "elf"
objcopy --strip-debug ${FULLKERNEL} ${KERNEL}
.else
cp ${FULLKERNEL} ${KERNEL}
strip -d ${KERNEL}
.endif
.endif
${FULLKERNEL}: ${BEFORE_DEPEND} ${SYSTEM_DEP} vers.o
@rm -f ${.TARGET}
@echo linking ${.TARGET}
${SYSTEM_LD}
${SYSTEM_LD_TAIL}
.if !exists(.depend)
${SYSTEM_OBJS}: vnode_if.h ${BEFORE_DEPEND:M*.h}
.endif
clean:
rm -f *.o *.so *.So *.ko *.s eddep errs genassym gensetdefs \
${KERNEL} ${FULLKERNEL} linterrs makelinks param.c \
setdef[01].c setdefs.h symbols.exclude symbols.sort tags \
vers.c vnode_if.c vnode_if.h ${CLEAN}
#lint: /tmp param.c
# @lint -hbxn -DGENERIC -Dvolatile= ${COPTS} \
# ${I386}/i386/Locore.c ${CFILES} ioconf.c param.c | \
# grep -v 'struct/union .* never defined' | \
# grep -v 'possible pointer alignment problem'
symbols.exclude:
echo "gcc2_compiled." >symbols.exclude
echo "___gnu_compiled_c" >>symbols.exclude
symbols.sort: ${I386}/i386/symbols.raw
grep -v '^#' ${I386}/i386/symbols.raw \
| sed 's/^ //' | sort -u > symbols.sort
locore.o: ${I386}/i386/locore.s assym.s
${NORMAL_S}
.if ${KERNFORMAT} == elf
# This is a hack. BFD "optimizes" away dynamic mode if there are no
# dynamic references. We could probably do a '-Bforcedynamic' mode like
# in the a.out ld. For now, this works.
hack.So: Makefile
touch hack.c
${CC} -elf -shared -nostdlib hack.c -o hack.So
rm -f hack.c
.endif
.ORDER: setdefs.h setdef0.c setdef1.c
setdef0.o: setdef0.c setdefs.h
${NORMAL_C}
setdef1.o: setdef1.c setdefs.h
${NORMAL_C}
setdef0.c setdef1.c setdefs.h: ${OBJS}
@gensetdefs ${OBJS}
# this rule stops ./assym.s in .depend from causing problems
./assym.s: assym.s
assym.s: genassym
./genassym >assym.s
genassym.o: ${I386}/i386/genassym.c
${CC} -c ${GEN_CFLAGS} ${I386}/i386/genassym.c
genassym: genassym.o
${CC} ${GEN_CFLAGS} genassym.o -o ${.TARGET}
${SYSTEM_OBJS} genassym.o vers.o: opt_global.h
depend: assym.s param.c vnode_if.h ${BEFORE_DEPEND}
rm -f .newdep
mkdep -a -f .newdep ${CFLAGS} ${CFILES} ${SYSTEM_CFILES}
mkdep -a -f .newdep ${GEN_CFLAGS} ${GEN_CFILES}
env MKDEP_CPP="${CC} -E" \
mkdep -a -f .newdep ${ASM_CFLAGS} ${SFILES} ${SYSTEM_SFILES}
rm -f .depend
mv -f .newdep .depend
cleandepend:
rm -f .depend
links:
egrep '#if' ${CFILES} | sed -f $S/conf/defines | \
sed -e 's/:.*//' -e 's/\.c/.o/' | sort -u > dontlink
echo ${CFILES} | tr -s ' ' '\12' | sed 's/\.c/.o/' | \
sort -u | comm -23 - dontlink | \
sed 's,../.*/\(.*.o\),rm -f \1;ln -s ../GENERIC/\1 \1,' > makelinks
sh makelinks && rm -f dontlink
tags:
@[ -f .depend ] || { echo "you must make depend first"; exit 1; }
sh $S/conf/systags.sh
rm -f tags1
sed -e 's, ../, ,' tags > tags1
install install.debug:
@if [ ! -f ${KERNEL}${.TARGET:S/install//} ] ; then \
echo "You must first build a kernel first." ; \
exit 1 ; \
fi
.if exists(${DESTDIR}/${KERNEL})
-chflags noschg ${DESTDIR}/${KERNEL}
mv ${DESTDIR}/${KERNEL} ${DESTDIR}/${KERNEL}.old
.endif
PATH=$${PATH}:/sbin:/usr/sbin; \
if [ `sysctl -n kern.bootfile` = ${DESTDIR}/${KERNEL} ] ; then \
sysctl -w kern.bootfile=${DESTDIR}/${KERNEL}.old ; \
if [ -f /var/db/kvm_${KERNEL}.db ] ; then \
mv -f /var/db/kvm_${KERNEL}.db /var/db/kvm_${KERNEL}.old.db ; \
fi \
fi
install -c -m 555 -o root -g wheel -fschg \
${KERNEL}${.TARGET:S/install//} ${DESTDIR}/${KERNEL}
reinstall reinstall.debug:
install -c -m 555 -o root -g wheel -fschg \
${KERNEL}${.TARGET:S/reinstall//} ${DESTDIR}/${KERNEL}
config.o:
${NORMAL_C}
ioconf.o:
${NORMAL_C}
param.c: $S/conf/param.c
-rm -f param.c
cp $S/conf/param.c .
param.o:
${NORMAL_C}
vers.c: $S/conf/newvers.sh $S/sys/param.h ${SYSTEM_DEP}
sh $S/conf/newvers.sh ${KERN_IDENT} ${IDENT}
# XXX strictly, everything depends on Makefile because changes to ${PROF}
# only appear there, but we don't handle that.
vers.o:
${NORMAL_C}
.ORDER: vnode_if.c vnode_if.h
vnode_if.c vnode_if.h: $S/kern/vnode_if.sh $S/kern/vnode_if.src
sh $S/kern/vnode_if.sh $S/kern/vnode_if.src
vnode_if.o:
${NORMAL_C}
.if exists($S/../share/mk)
.include "$S/../share/mk/bsd.kern.mk"
.else
.include <bsd.kern.mk>
.endif
%RULES
# DO NOT DELETE THIS LINE -- make depend uses it