mirror of
https://git.hardenedbsd.org/hardenedbsd/HardenedBSD.git
synced 2024-12-30 15:38:06 +01:00
435 lines
14 KiB
C
435 lines
14 KiB
C
|
/*******************************************************************************
|
|||
|
|
Copyright (C) 2013 Annapurna Labs Ltd.
|
|||
|
|
|
|||
|
|
This file may be licensed under the terms of the Annapurna Labs Commercial
|
|||
|
|
License Agreement.
|
|||
|
|
|
|||
|
|
Alternatively, this file can be distributed under the terms of the GNU General
|
|||
|
|
Public License V2 or V3 as published by the Free Software Foundation and can be
|
|||
|
|
found at http://www.gnu.org/licenses/gpl-2.0.html
|
|||
|
|
|
|||
|
|
Alternatively, redistribution and use in source and binary forms, with or
|
|||
|
|
without modification, are permitted provided that the following conditions are
|
|||
|
|
met:
|
|||
|
|
|
|||
|
|
* Redistributions of source code must retain the above copyright notice,
|
|||
|
|
this list of conditions and the following disclaimer.
|
|||
|
|
|
|||
|
|
* Redistributions in binary form must reproduce the above copyright
|
|||
|
|
notice, this list of conditions and the following disclaimer in
|
|||
|
|
the documentation and/or other materials provided with the
|
|||
|
|
distribution.
|
|||
|
|
|
|||
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
|||
|
|
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|||
|
|
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|||
|
|
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
|
|||
|
|
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|||
|
|
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|||
|
|
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
|||
|
|
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|||
|
|
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|||
|
|
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|||
|
|
|
|||
|
|
*******************************************************************************/
|
|||
|
|
|
|||
|
|
/**
|
|||
|
|
* @{
|
|||
|
|
* @file al_hal_serdes_c_regs.h
|
|||
|
|
*
|
|||
|
|
* @brief ... registers
|
|||
|
|
*
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
#ifndef __AL_HAL_serdes_c_REGS_H__
|
|||
|
|
#define __AL_HAL_serdes_c_REGS_H__
|
|||
|
|
|
|||
|
|
#include "al_hal_plat_types.h"
|
|||
|
|
|
|||
|
|
#ifdef __cplusplus
|
|||
|
|
extern "C" {
|
|||
|
|
#endif
|
|||
|
|
/*
|
|||
|
|
* Unit Registers
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
struct al_serdes_c_gen {
|
|||
|
|
/* [0x0] SERDES registers Version */
|
|||
|
|
uint32_t version;
|
|||
|
|
uint32_t rsrvd_0[3];
|
|||
|
|
/* [0x10] SERDES register file address */
|
|||
|
|
uint32_t reg_addr;
|
|||
|
|
/* [0x14] SERDES register file data */
|
|||
|
|
uint32_t reg_data;
|
|||
|
|
/* [0x18] SERDES control */
|
|||
|
|
uint32_t ctrl;
|
|||
|
|
/* [0x1c] SERDES cpu mem address */
|
|||
|
|
uint32_t cpu_prog_addr;
|
|||
|
|
/* [0x20] SERDES cpu mem data */
|
|||
|
|
uint32_t cpu_prog_data;
|
|||
|
|
/* [0x24] SERDES data mem address */
|
|||
|
|
uint32_t cpu_data_mem_addr;
|
|||
|
|
/* [0x28] SERDES data mem data */
|
|||
|
|
uint32_t cpu_data_mem_data;
|
|||
|
|
/* [0x2c] SERDES control */
|
|||
|
|
uint32_t rst;
|
|||
|
|
/* [0x30] SERDES control */
|
|||
|
|
uint32_t status;
|
|||
|
|
uint32_t rsrvd[51];
|
|||
|
|
};
|
|||
|
|
struct al_serdes_c_lane {
|
|||
|
|
uint32_t rsrvd_0[4];
|
|||
|
|
/* [0x10] Data configuration */
|
|||
|
|
uint32_t cfg;
|
|||
|
|
/* [0x14] Lane status */
|
|||
|
|
uint32_t stat;
|
|||
|
|
/* [0x18] SERDES control */
|
|||
|
|
uint32_t reserved;
|
|||
|
|
uint32_t rsrvd[25];
|
|||
|
|
};
|
|||
|
|
|
|||
|
|
struct al_serdes_c_regs {
|
|||
|
|
uint32_t rsrvd_0[64];
|
|||
|
|
struct al_serdes_c_gen gen; /* [0x100] */
|
|||
|
|
struct al_serdes_c_lane lane[2]; /* [0x200] */
|
|||
|
|
};
|
|||
|
|
|
|||
|
|
|
|||
|
|
/*
|
|||
|
|
* Registers Fields
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
|
|||
|
|
/**** version register ****/
|
|||
|
|
/* Revision number (Minor) */
|
|||
|
|
#define SERDES_C_GEN_VERSION_RELEASE_NUM_MINOR_MASK 0x000000FF
|
|||
|
|
#define SERDES_C_GEN_VERSION_RELEASE_NUM_MINOR_SHIFT 0
|
|||
|
|
/* Revision number (Major) */
|
|||
|
|
#define SERDES_C_GEN_VERSION_RELEASE_NUM_MAJOR_MASK 0x0000FF00
|
|||
|
|
#define SERDES_C_GEN_VERSION_RELEASE_NUM_MAJOR_SHIFT 8
|
|||
|
|
/* date of release */
|
|||
|
|
#define SERDES_C_GEN_VERSION_DATE_DAY_MASK 0x001F0000
|
|||
|
|
#define SERDES_C_GEN_VERSION_DATE_DAY_SHIFT 16
|
|||
|
|
/* month of release */
|
|||
|
|
#define SERDES_C_GEN_VERSION_DATA_MONTH_MASK 0x01E00000
|
|||
|
|
#define SERDES_C_GEN_VERSION_DATA_MONTH_SHIFT 21
|
|||
|
|
/* year of release (starting from 2000) */
|
|||
|
|
#define SERDES_C_GEN_VERSION_DATE_YEAR_MASK 0x3E000000
|
|||
|
|
#define SERDES_C_GEN_VERSION_DATE_YEAR_SHIFT 25
|
|||
|
|
/* Reserved */
|
|||
|
|
#define SERDES_C_GEN_VERSION_RESERVED_MASK 0xC0000000
|
|||
|
|
#define SERDES_C_GEN_VERSION_RESERVED_SHIFT 30
|
|||
|
|
|
|||
|
|
/**** reg_addr register ****/
|
|||
|
|
/* address value */
|
|||
|
|
#define SERDES_C_GEN_REG_ADDR_VAL_MASK 0x00007FFF
|
|||
|
|
#define SERDES_C_GEN_REG_ADDR_VAL_SHIFT 0
|
|||
|
|
|
|||
|
|
/**** reg_data register ****/
|
|||
|
|
/* data value */
|
|||
|
|
#define SERDES_C_GEN_REG_DATA_VAL_MASK 0x000000FF
|
|||
|
|
#define SERDES_C_GEN_REG_DATA_VAL_SHIFT 0
|
|||
|
|
/* Bit-wise write enable */
|
|||
|
|
#define SERDES_C_GEN_REG_DATA_STRB_MASK 0x0000FF00
|
|||
|
|
#define SERDES_C_GEN_REG_DATA_STRB_SHIFT 8
|
|||
|
|
|
|||
|
|
/**** ctrl register ****/
|
|||
|
|
/*
|
|||
|
|
* 0x0 – Select reference clock from Bump
|
|||
|
|
* 0x1 – Select inter-macro reference clock from the left side
|
|||
|
|
* 0x2 – Same as 0x0
|
|||
|
|
* 0x3 – Select inter-macro reference clock from the right side
|
|||
|
|
*/
|
|||
|
|
#define SERDES_C_GEN_CTRL_REFCLK_INPUT_SEL_MASK 0x00000003
|
|||
|
|
#define SERDES_C_GEN_CTRL_REFCLK_INPUT_SEL_SHIFT 0
|
|||
|
|
|
|||
|
|
#define SERDES_C_GEN_CTRL_REFCLK_INPUT_SEL_REF \
|
|||
|
|
(0 << (SERDES_C_GEN_CTRL_REFCLK_INPUT_SEL_SHIFT))
|
|||
|
|
#define SERDES_C_GEN_CTRL_REFCLK_INPUT_SEL_L2R \
|
|||
|
|
(1 << (SERDES_C_GEN_CTRL_REFCLK_INPUT_SEL_SHIFT))
|
|||
|
|
#define SERDES_C_GEN_CTRL_REFCLK_INPUT_SEL_R2L \
|
|||
|
|
(3 << (SERDES_C_GEN_CTRL_REFCLK_INPUT_SEL_SHIFT))
|
|||
|
|
|
|||
|
|
/*
|
|||
|
|
* 0x0 – Tied to 0 to save power
|
|||
|
|
* 0x1 – Select reference clock from Bump
|
|||
|
|
* 0x2 – Select inter-macro reference clock input from right side
|
|||
|
|
* 0x3 – Same as 0x2
|
|||
|
|
*/
|
|||
|
|
#define SERDES_C_GEN_CTRL_REFCLK_LEFT_SEL_MASK 0x00000030
|
|||
|
|
#define SERDES_C_GEN_CTRL_REFCLK_LEFT_SEL_SHIFT 4
|
|||
|
|
|
|||
|
|
#define SERDES_C_GEN_CTRL_REFCLK_LEFT_SEL_0 \
|
|||
|
|
(0 << (SERDES_C_GEN_CTRL_REFCLK_LEFT_SEL_SHIFT))
|
|||
|
|
#define SERDES_C_GEN_CTRL_REFCLK_LEFT_SEL_REF \
|
|||
|
|
(1 << (SERDES_C_GEN_CTRL_REFCLK_LEFT_SEL_SHIFT))
|
|||
|
|
#define SERDES_C_GEN_CTRL_REFCLK_LEFT_SEL_R2L \
|
|||
|
|
(2 << (SERDES_C_GEN_CTRL_REFCLK_LEFT_SEL_SHIFT))
|
|||
|
|
|
|||
|
|
/*
|
|||
|
|
* 0x0 – Tied to 0 to save power
|
|||
|
|
* 0x1 – Select reference clock from Bump
|
|||
|
|
* 0x2 – Select inter-macro reference clock input from left side
|
|||
|
|
* 0x3 – Same as 0x2
|
|||
|
|
*/
|
|||
|
|
#define SERDES_C_GEN_CTRL_REFCLK_RIGHT_SEL_MASK 0x000000C0
|
|||
|
|
#define SERDES_C_GEN_CTRL_REFCLK_RIGHT_SEL_SHIFT 6
|
|||
|
|
|
|||
|
|
#define SERDES_C_GEN_CTRL_REFCLK_RIGHT_SEL_0 \
|
|||
|
|
(0 << (SERDES_C_GEN_CTRL_REFCLK_RIGHT_SEL_SHIFT))
|
|||
|
|
#define SERDES_C_GEN_CTRL_REFCLK_RIGHT_SEL_REF \
|
|||
|
|
(1 << (SERDES_C_GEN_CTRL_REFCLK_RIGHT_SEL_SHIFT))
|
|||
|
|
#define SERDES_C_GEN_CTRL_REFCLK_RIGHT_SEL_L2R \
|
|||
|
|
(2 << (SERDES_C_GEN_CTRL_REFCLK_RIGHT_SEL_SHIFT))
|
|||
|
|
|
|||
|
|
/*
|
|||
|
|
* Program memory acknowledge - Only when the access
|
|||
|
|
* to the program memory is not
|
|||
|
|
* ready for the microcontroller, it
|
|||
|
|
* is driven to 0
|
|||
|
|
*/
|
|||
|
|
#define SERDES_C_GEN_CTRL_CPU_MEMPSACK (1 << 8)
|
|||
|
|
/*
|
|||
|
|
* Data memory acknowledge - Only when the access
|
|||
|
|
* to the program memory is not
|
|||
|
|
* ready for the microcontroller, it
|
|||
|
|
* is driven to 0
|
|||
|
|
*/
|
|||
|
|
#define SERDES_C_GEN_CTRL_CPU_MEMACK (1 << 12)
|
|||
|
|
/*
|
|||
|
|
* 0 - keep cpu clk as sb clk
|
|||
|
|
* 1 – cpu_clk is sb_clk divided by 2
|
|||
|
|
*/
|
|||
|
|
#define SERDES_C_GEN_CTRL_CPU_CLK_DIV (1 << 16)
|
|||
|
|
/*
|
|||
|
|
* 0x0 – OIF CEI-28G-SR
|
|||
|
|
* 0x1 – OIF CIE-25G-LR
|
|||
|
|
* 0x8 – XFI
|
|||
|
|
* Others – Reserved
|
|||
|
|
*
|
|||
|
|
* Note that phy_ctrl_cfg_i[3] is used to signify high-speed/low-speed
|
|||
|
|
*/
|
|||
|
|
#define SERDES_C_GEN_CTRL_PHY_CTRL_CFG_MASK 0x00F00000
|
|||
|
|
#define SERDES_C_GEN_CTRL_PHY_CTRL_CFG_SHIFT 20
|
|||
|
|
/*
|
|||
|
|
* 0 - Internal 8051 micro- controller is allowed to access the internal APB
|
|||
|
|
* CSR. Internal APB runs at cpu_clk_i, and the accesses from the external APB
|
|||
|
|
* in apb_clk_i domain to APB CSR are resynchronized to cpu_clk_i. 1 – Bypass
|
|||
|
|
* CPU. Internal 8051 micro-controller is blocked from accessing the internal
|
|||
|
|
* APB CSR. Internal APB runs at apb_clk_i.
|
|||
|
|
*/
|
|||
|
|
#define SERDES_C_GEN_CTRL_CPU_BYPASS (1 << 24)
|
|||
|
|
|
|||
|
|
/**** cpu_prog_addr register ****/
|
|||
|
|
/*
|
|||
|
|
* address value 32 bit,
|
|||
|
|
* The firmware data will be 1 byte with 64K rows
|
|||
|
|
*/
|
|||
|
|
#define SERDES_C_GEN_CPU_PROG_ADDR_VAL_MASK 0x00007FFF
|
|||
|
|
#define SERDES_C_GEN_CPU_PROG_ADDR_VAL_SHIFT 0
|
|||
|
|
|
|||
|
|
/**** cpu_data_mem_addr register ****/
|
|||
|
|
/* address value – 8K byte memory */
|
|||
|
|
#define SERDES_C_GEN_CPU_DATA_MEM_ADDR_VAL_MASK 0x00001FFF
|
|||
|
|
#define SERDES_C_GEN_CPU_DATA_MEM_ADDR_VAL_SHIFT 0
|
|||
|
|
|
|||
|
|
/**** cpu_data_mem_data register ****/
|
|||
|
|
/* data value */
|
|||
|
|
#define SERDES_C_GEN_CPU_DATA_MEM_DATA_VAL_MASK 0x000000FF
|
|||
|
|
#define SERDES_C_GEN_CPU_DATA_MEM_DATA_VAL_SHIFT 0
|
|||
|
|
|
|||
|
|
/**** rst register ****/
|
|||
|
|
/* Power on reset Signal – active low */
|
|||
|
|
#define SERDES_C_GEN_RST_POR_N (1 << 0)
|
|||
|
|
/* CMU reset Active low */
|
|||
|
|
#define SERDES_C_GEN_RST_CM0_RST_N (1 << 1)
|
|||
|
|
/*
|
|||
|
|
* 0x0 – Normal / Active
|
|||
|
|
* 0x1 – Partial power down
|
|||
|
|
* 0x2 – Near complete power down (only
|
|||
|
|
* refclk buffers and portions of analog bias
|
|||
|
|
* active)
|
|||
|
|
* 0x3 – complete power down (IDDQ mode)
|
|||
|
|
* Can be asserted when CMU is in normal
|
|||
|
|
* mode. These modes provide an increased
|
|||
|
|
* power savings compared to reset mode.
|
|||
|
|
* Signal is overridden by por_n_i so has no
|
|||
|
|
* effect in power on reset state.
|
|||
|
|
*/
|
|||
|
|
#define SERDES_C_GEN_RST_CM0_PD_MASK 0x00000030
|
|||
|
|
#define SERDES_C_GEN_RST_CM0_PD_SHIFT 4
|
|||
|
|
/* Lane0 reset signal active low */
|
|||
|
|
#define SERDES_C_GEN_RST_LN0_RST_N (1 << 6)
|
|||
|
|
/* Lane1 reset signal active low */
|
|||
|
|
#define SERDES_C_GEN_RST_LN1_RST_N (1 << 7)
|
|||
|
|
/*
|
|||
|
|
* 0x0 – Normal / Active
|
|||
|
|
* 0x1 – Partial power down
|
|||
|
|
* 0x2 – Most blocks powered down (only LOS
|
|||
|
|
* active)
|
|||
|
|
* 0x3 – complete power down (IDDQ mode)
|
|||
|
|
* Can be asserted when Lane is in normal
|
|||
|
|
* mode. These modes provide an increased
|
|||
|
|
* power savings compared to reset mode.
|
|||
|
|
* Signal is overridden by por_n_i so has no
|
|||
|
|
* affect in power on reset state
|
|||
|
|
*/
|
|||
|
|
#define SERDES_C_GEN_RST_LN0_PD_MASK 0x00000300
|
|||
|
|
#define SERDES_C_GEN_RST_LN0_PD_SHIFT 8
|
|||
|
|
/*
|
|||
|
|
* 0x0 – Normal / Active
|
|||
|
|
* 0x1 – Partial power down
|
|||
|
|
* 0x2 – Most blocks powered down (only LOS
|
|||
|
|
* active)
|
|||
|
|
* 0x3 – complete power down (IDDQ mode)
|
|||
|
|
* Can be asserted when Lane is in normal
|
|||
|
|
* mode. These modes provide an increased
|
|||
|
|
* power savings compared to reset mode.
|
|||
|
|
* Signal is overridden by por_n_i so has no
|
|||
|
|
* affect in power on reset state
|
|||
|
|
*/
|
|||
|
|
#define SERDES_C_GEN_RST_LN1_PD_MASK 0x00000C00
|
|||
|
|
#define SERDES_C_GEN_RST_LN1_PD_SHIFT 10
|
|||
|
|
|
|||
|
|
#define SERDES_C_GEN_RST_CPU_MEM_RESET (1 << 12)
|
|||
|
|
|
|||
|
|
#define SERDES_C_GEN_RST_CPU_MEM_SHUTDOWN (1 << 13)
|
|||
|
|
|
|||
|
|
#define SERDES_C_GEN_RST_CAPRI_APB_RESET (1 << 14)
|
|||
|
|
|
|||
|
|
/**** status register ****/
|
|||
|
|
/*
|
|||
|
|
* 0x0 – No error
|
|||
|
|
* 0x1 – PHY has an internal error
|
|||
|
|
*/
|
|||
|
|
#define SERDES_C_GEN_STATUS_ERR_O (1 << 0)
|
|||
|
|
/*
|
|||
|
|
* 0x0 – PHY is not ready to respond to
|
|||
|
|
* cm0_rst_n_i and cm0_pd_i[1:0]. The
|
|||
|
|
* signals should not be changed.
|
|||
|
|
* 0x1 - PHY is ready to respond to
|
|||
|
|
* cm0_rst_n_i and cm0_pd_i[1:0]
|
|||
|
|
*/
|
|||
|
|
#define SERDES_C_GEN_STATUS_CM0_RST_PD_READY (1 << 1)
|
|||
|
|
/*
|
|||
|
|
* Indicates CMU PLL has locked to the
|
|||
|
|
* reference clock and all output clocks are at
|
|||
|
|
* the correct frequency
|
|||
|
|
*/
|
|||
|
|
#define SERDES_C_GEN_STATUS_CM0_OK_O (1 << 2)
|
|||
|
|
/*
|
|||
|
|
* 0x0 – PHY is not ready to respond to
|
|||
|
|
* ln0_rst_n and ln0_pd[1:0]. The signals
|
|||
|
|
* should not be changed.
|
|||
|
|
* 0x1 - PHY is ready to respond to lnX_rst_n_i
|
|||
|
|
* and lnX_pd_i[1:0]
|
|||
|
|
*/
|
|||
|
|
#define SERDES_C_GEN_STATUS_LN0_RST_PD_READY (1 << 3)
|
|||
|
|
/*
|
|||
|
|
* 0x0 – PHY is not ready to respond to
|
|||
|
|
* ln1_rst_n_i and ln1_pd[1:0]. The signals
|
|||
|
|
* should not be changed.
|
|||
|
|
* 0x1 - PHY is ready to respond to lnX_rst_n_i
|
|||
|
|
* and lnX_pd_i[1:0]
|
|||
|
|
*/
|
|||
|
|
#define SERDES_C_GEN_STATUS_LN1_RST_PD_READY (1 << 4)
|
|||
|
|
/*
|
|||
|
|
* Active low when the CPU performs a wait cycle (internally or externally
|
|||
|
|
* generated)
|
|||
|
|
*/
|
|||
|
|
#define SERDES_C_GEN_STATUS_CPU_WAITSTATE (1 << 5)
|
|||
|
|
|
|||
|
|
#define SERDES_C_GEN_STATUS_TBUS_MASK 0x000FFF00
|
|||
|
|
#define SERDES_C_GEN_STATUS_TBUS_SHIFT 8
|
|||
|
|
|
|||
|
|
/**** cfg register ****/
|
|||
|
|
/* 1- Swap 32 bit data on RX side */
|
|||
|
|
#define SERDES_C_LANE_CFG_RX_LANE_SWAP (1 << 0)
|
|||
|
|
/* 1- Swap 32 bit data on TX side */
|
|||
|
|
#define SERDES_C_LANE_CFG_TX_LANE_SWAP (1 << 1)
|
|||
|
|
/* 1 – invert rx data polarity */
|
|||
|
|
#define SERDES_C_LANE_CFG_LN_CTRL_RXPOLARITY (1 << 2)
|
|||
|
|
/* 1 – invert tx data polarity */
|
|||
|
|
#define SERDES_C_LANE_CFG_TX_LANE_POLARITY (1 << 3)
|
|||
|
|
/*
|
|||
|
|
* 0x0 –Data on lnX_txdata_o will not be
|
|||
|
|
* transmitted. Transmitter will be placed into
|
|||
|
|
* electrical idle.
|
|||
|
|
* 0x1 – Data on the active bits of
|
|||
|
|
* lnX_txdata_o will be transmitted
|
|||
|
|
*/
|
|||
|
|
#define SERDES_C_LANE_CFG_LN_CTRL_TX_EN (1 << 4)
|
|||
|
|
/*
|
|||
|
|
* Informs the PHY to bypass the output of the
|
|||
|
|
* analog LOS detector and instead rely upon
|
|||
|
|
* a protocol LOS mechanism in the SoC/ASIC
|
|||
|
|
* 0x0 – LOS operates as normal
|
|||
|
|
* 0x1 – Bypass analog LOS output and
|
|||
|
|
* instead rely upon protocol-level LOS
|
|||
|
|
* detection via input lnX_ctrl_los_eii_value
|
|||
|
|
*/
|
|||
|
|
#define SERDES_C_LANE_CFG_LN_CTRL_LOS_EII_EN (1 << 5)
|
|||
|
|
/*
|
|||
|
|
* If lnX_ctrl_los_eii_en_i = 1 then Informs
|
|||
|
|
* the PHY that the received signal was lost
|
|||
|
|
*/
|
|||
|
|
#define SERDES_C_LANE_CFG_LN_CTRL_LOS_EII_VALUE (1 << 6)
|
|||
|
|
/* One hot mux */
|
|||
|
|
#define SERDES_C_LANE_CFG_TX_DATA_SRC_SELECT_MASK 0x00000F00
|
|||
|
|
#define SERDES_C_LANE_CFG_TX_DATA_SRC_SELECT_SHIFT 8
|
|||
|
|
/* 0x0 - 20-bit 0x1 – 40-bit */
|
|||
|
|
#define SERDES_C_LANE_CFG_LN_CTRL_DATA_WIDTH (1 << 12)
|
|||
|
|
|
|||
|
|
/**** stat register ****/
|
|||
|
|
/*
|
|||
|
|
* x0 – lane is not ready to send and receive data
|
|||
|
|
* 0x1 – lane is ready to send and receive data
|
|||
|
|
*/
|
|||
|
|
#define SERDES_C_LANE_STAT_LNX_STAT_OK (1 << 0)
|
|||
|
|
/*
|
|||
|
|
* 0x0 – received data run length has not
|
|||
|
|
* exceed the programmable run length
|
|||
|
|
* detector threshold
|
|||
|
|
* 0x1 – received data run length has
|
|||
|
|
* exceeded the programmable run length
|
|||
|
|
* detector threshold
|
|||
|
|
*/
|
|||
|
|
#define SERDES_C_LANE_STAT_LN_STAT_RUNLEN_ERR (1 << 1)
|
|||
|
|
/*
|
|||
|
|
* 0x0 – data on lnX_rxdata_o are invalid
|
|||
|
|
* 0x1 – data on the active bits of
|
|||
|
|
* lnX_rxdata_o are valid
|
|||
|
|
*/
|
|||
|
|
#define SERDES_C_LANE_STAT_LN_STAT_RXVALID (1 << 2)
|
|||
|
|
/*
|
|||
|
|
* Loss of Signal (LOS) indicator that includes
|
|||
|
|
* the combined functions of the digitally
|
|||
|
|
* assisted analog LOS, digital LOS, and
|
|||
|
|
* protocol LOS override features
|
|||
|
|
* 0x0 – Signal detected on lnX_rxp_i /
|
|||
|
|
* lnX_rxm_i pins
|
|||
|
|
* 0x1 – No signal detected on lnX_rxp_i /
|
|||
|
|
* lnX_rxm_i pins
|
|||
|
|
*/
|
|||
|
|
#define SERDES_C_LANE_STAT_LN_STAT_LOS (1 << 3)
|
|||
|
|
|
|||
|
|
#define SERDES_C_LANE_STAT_LN_STAT_LOS_DEGLITCH (1 << 4)
|
|||
|
|
|
|||
|
|
/**** reserved register ****/
|
|||
|
|
|
|||
|
|
#define SERDES_C_LANE_RESERVED_DEF_0_MASK 0x0000FFFF
|
|||
|
|
#define SERDES_C_LANE_RESERVED_DEF_0_SHIFT 0
|
|||
|
|
|
|||
|
|
#define SERDES_C_LANE_RESERVED_DEF_1_MASK 0xFFFF0000
|
|||
|
|
#define SERDES_C_LANE_RESERVED_DEF_1_SHIFT 16
|
|||
|
|
|
|||
|
|
#ifdef __cplusplus
|
|||
|
|
}
|
|||
|
|
#endif
|
|||
|
|
|
|||
|
|
#endif /* __AL_HAL_serdes_c_REGS_H__ */
|
|||
|
|
|
|||
|
|
/** @} end of ... group */
|
|||
|
|
|
|||
|
|
|