Stefan Eßer
7d44d0e3cf
ncrcontrol will be installed SETGID kmem in /usr/sbin.
1994-10-13 17:45:40 +00:00
Stefan Eßer
35321ba474
Moved into correct MAN section ...
1994-10-13 17:43:51 +00:00
Jordan K. Hubbard
c41b51643d
Silence the sub-makes.
1994-10-13 10:33:35 +00:00
Jordan K. Hubbard
3270fb5ece
Put back the `:' in the trinary ?: so this can actually compile again! :)
1994-10-13 08:46:44 +00:00
Jordan K. Hubbard
64324dc610
Change the way pre-install was done after a suggestion from Andrew.
...
Now both pre-install and install inherit the INSTALL_COOKIE.
1994-10-13 08:08:56 +00:00
Stefan Eßer
55f018a694
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
...
removed PCI mapping call from vga_attach() in pcisupport.c.
1994-10-13 01:12:31 +00:00
Stefan Eßer
152f2ff316
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
...
Debugging option changed, getirr() removed.
1994-10-13 01:11:13 +00:00
Jordan K. Hubbard
baaac71882
Re-work the way pre-install was being depended. I couldn't make the
...
install cookie work any other way (perhaps I'm just being stupid).
In any case, INSTALL_COOKIE now works as advertised, and prevents duplicate
installations. pre-install users will have to keep their own cookies if
they wish to avoid duplicate installations, or tell me how to make the
rules run properly.
1994-10-12 23:32:32 +00:00
Poul-Henning Kamp
72ab19aeb7
Added '-F file' option of mount_mfs. This allows me to make floppy images
...
without waiting for my floppy-drive all the time :-) Might have other
interesting uses too.
1994-10-12 22:04:36 +00:00
Søren Schmidt
2a460312c8
Don't allow the same MISC module loading more than once..
1994-10-12 20:28:32 +00:00
Bruce Evans
b2f6e97280
Work around FIFO bug in SMC UARTS.
...
Fix endless loop in siopoll() for an event on a tty with no tty struct.
Don't generate unwanted interrupts in the serial console driver. These
bugs probably don't matter unless the tty struct is dynamically allocated.
Support polled mode. To use it, leave out the irq and the vector in
the config file. It only causes extra overhead for open polled ports.
The maximum usable speed is approximately 1000 bps for a 16450 and
15000 bps for a 16550.
Other cosmetic changes.
1994-10-12 19:49:11 +00:00
Stefan Eßer
a9db861824
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
...
Config and statuts display utility for the NCR PCI SCSI driver.
1994-10-12 12:02:52 +00:00
Stefan Eßer
fb912bf5b8
Submitted by: Matt Thomas <thomas@lkg.dec.com>
...
#ifdef MULTICAST removed.
1994-10-12 11:39:37 +00:00
Stefan Eßer
140e168d9b
Submitted by: Matt Thomas <thomas@lkg.dec.com>
...
Preliminary FAST Ethernet support added (DEC21140).
1994-10-12 11:19:36 +00:00
Stefan Eßer
157823e855
Temporary disable scanning for VGA cards, was causing problems.
1994-10-12 11:06:49 +00:00
Stefan Eßer
5044407419
Submitted by: Bruce Evans <bde@zeta.org.au>
...
Function getirr() could clobber interrupt controller state.
1994-10-12 04:17:24 +00:00
Poul-Henning Kamp
1915df31ae
Added a 10ms delay after the HW-reset in bt_init(). This makes some funky
...
old boards more happy.
Reviewed by: Julian
Submitted by: Julian
1994-10-12 04:15:30 +00:00
Stefan Eßer
8f7b2bb2fb
Name change: pci_intel.c -> pcisupport.c
1994-10-12 03:56:49 +00:00
Andrey A. Chernov
3d1e296ec5
Oops, change ${MAKE_FLAGS} to ${MAKEFLAGS} in pre-configure line
1994-10-12 03:25:59 +00:00
Andrey A. Chernov
ec55794466
Move 'make pre-configure' inside .configure.done: target, or
...
it issued again and again instead.
1994-10-12 03:12:19 +00:00
Andrey A. Chernov
b82fc8c612
configure: pre-configure extract ... must be
...
configure: extract pre-configure ...
1994-10-12 02:58:38 +00:00
Stefan Eßer
468010e809
Small corrections:
...
pci config line now without irq
boot message changed
1994-10-12 02:41:21 +00:00
David Greenman
e1e293a5dc
Added '-b' option to display the number of in and out bytes on a given
...
interface (used with -i and -I flag).
1994-10-12 02:37:35 +00:00
Stefan Eßer
65772aee92
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
...
Bug fixed, that caused system hang on first interrupt on some motherboards.
New version of PCI bus configuration code, now supports dynamic interrupt
configuration (using BIOS supplied values).
NCR SCSI and DEC Ethernet driver patched to use this feature.
*** Remove PCI IRQ specifications from your kernel config file ! ***
1994-10-12 02:33:23 +00:00
Stefan Eßer
86e0c19b6c
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
...
Name change: pci_intel.c -> pcisupport.c
1994-10-12 02:27:08 +00:00
Stefan Eßer
8870af7f56
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
...
Files merged and name change: pci_device.h + pcibios.h -> pcireg.h
1994-10-12 02:25:03 +00:00
Stefan Eßer
22d3e9a6d7
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
...
Name change: ncrstat -> ncrcontrol
1994-10-12 02:23:14 +00:00
Stefan Eßer
a7d314a58f
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
...
Name change: ncr_reg.h -> ncrreg.h
1994-10-12 02:21:56 +00:00
Andrey A. Chernov
0f61271c87
Add LDADD += -lcurses
1994-10-12 02:13:39 +00:00
Andrey A. Chernov
e46d877d8d
Add LDADD+= -ltermcap
1994-10-12 02:06:02 +00:00
Andrey A. Chernov
9c9986c2c8
LDADD: = -> +=
1994-10-12 01:59:06 +00:00
Andrey A. Chernov
2041b760c8
SHARED_LDADD --> LDADD
...
cmp redirection removed
1994-10-12 01:57:56 +00:00
Andrey A. Chernov
ad37120909
SHARED_LDADD --> LDADD
1994-10-12 01:54:38 +00:00
Andrey A. Chernov
f8e42f876d
Fix two problems pointed by Bruce:
...
keys.tries generated in ${.CURDIR} which may be readonly
lib_options.{po,so} not properly rebuilded if keys.tries deleted
and no .depend
1994-10-12 01:51:27 +00:00
Andrey A. Chernov
52f2c9a10a
Output error diagnostics, if occurse.
...
Add radiolist test.
1994-10-11 23:52:16 +00:00
Andrey A. Chernov
52bc859d7c
Use libdialog now.
1994-10-11 23:51:09 +00:00
Andrey A. Chernov
20bb37a799
LIBDIALOG added
1994-10-11 23:38:19 +00:00
Andrey A. Chernov
02d988ba01
libdialog added
1994-10-11 23:34:13 +00:00
Andrey A. Chernov
4affe09b69
Add libdialog to beforeinstall section
1994-10-11 23:33:00 +00:00
Andrey A. Chernov
3728ed9c8f
Make all dialog box available from C programs via functions calls
1994-10-11 23:30:51 +00:00
Garrett Wollman
5df7296441
Fix a bug which caused panics when attempting to change just the flags of
...
a route. (This still doesn't work, but it doesn't panic now.) It looks
like there may be a number of incipient bugs in this code.
Also, get ready for the time when all IP gateway routes are cloning, which
is necessary to keep proper TCP statistics.
1994-10-11 23:16:38 +00:00
Søren Schmidt
fabbd9b7ce
Ouch, fixed bug in errno translation (ibcs2 support).
1994-10-11 22:37:14 +00:00
Søren Schmidt
bc576ac45e
Fixed bug in ibcs2 signal translation.
1994-10-11 20:42:01 +00:00
Søren Schmidt
99ec0d5b44
Removed static declaration of getvnode() (used in ibcs2)
1994-10-11 20:40:12 +00:00
Andrey A. Chernov
220553025d
Better IXANY/IXOFF processing into setflags.
...
Cosmetique 'tab' fix
1994-10-11 20:29:42 +00:00
Andrey A. Chernov
dec3cc9756
Fix old cs8->cs7 bug, bringed by rlogin.
...
Obtained from: FreeBSD 1.x
1994-10-11 20:04:49 +00:00
Andrey A. Chernov
8ea50e34cb
Implement meta bit in more cosher way after contacting with zmbenhal
...
Shut up compiler warning
1994-10-11 16:36:53 +00:00
Geoff Rehmet
65bbec73d7
- remove unnecessary #includes (I think a couple of redundant ones remain)
...
- excise some unused code (#if 0'd out - don't want to nuke it yet)
- fix problems with "make depend" - some macros were screwing it up
- get rid of some static local variables
There still seems to be a small reentrancy problem somewhere.
1994-10-11 11:29:17 +00:00
Garrett Wollman
f665d68d04
Make id' and groups' somewhat faster and less cpu-intensive :-)
...
Really!
1994-10-11 02:13:21 +00:00
Garrett Wollman
210df5b10c
Turn off OXTABS by default. Inspection of systems here finds no commercial
...
systems with it on by default (or the equivalent flag) and terminal control
sequences confuse it greatly. (Try running `ls' under bash in an XTerm,
for instance.)
1994-10-11 00:16:28 +00:00
