Recent firmware versions round down the value passed here by the MSS
and subsequently mishandle transmitted PDUs larger than the rounded
down value.
Reported by: Jithesh Arakkan @ Chelsio
Sponsored by: Chelsio Communications
While nvlists are very useful in maximising flexibility for future
extensions their performance is simply unacceptably bad for the
getstates feature, where we can easily want to export a million states
or more.
The DIOCGETSTATESNV call has been MFCd, but has not hit a release on any
branch, so we can still remove it everywhere.
Reviewed by: mjg
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D31099
Add request submission status checks before checking req->ir_compcode,
otherwise it may be zero just because of initialization.
Add checks for req->ir_compcode errors in ipmi_reset_watchdog() and
ipmi_set_watchdog(). In first case explicitly check for 0x80, which
means timer was not previously set, that I found happening after BMC
cold reset. This change makes watchdog timer to recover instead of
permanently ignoring reset errors after BMC reset or upgraded.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Use of smp_rendezvous_cpus() instead of sched_bind() allows to not
block indefinitely if target CPU is running some thread with higher
priority, while all we need is single rdmsr/wrmsr instruction call.
I guess it should also be much cheaper than full thread migration.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
KASAN and KCSAN implement interceptors for various primitive operations
that are not instrumented by the compiler. KMSAN requires them as well.
Rather than adding new cases for each sanitizer which requires
interceptors, implement the following protocol:
- When interceptor definitions are required, define
SAN_NEEDS_INTERCEPTORS and SANITIZER_INTERCEPTOR_PREFIX.
- In headers that declare functions which need to be intercepted by a
sanitizer runtime, use SANITIZER_INTERCEPTOR_PREFIX to provide
declarations.
- When SAN_RUNTIME is defined, do not redefine the names of intercepted
functions. This is typically the case in files which implement
sanitizer runtimes but is also needed in, for example, files which
define ifunc selectors for intercepted operations.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
When an active g_vfs is orphaned due to an underlying disk going away
the destroy is deferred until the filesystem is unmounted in
g_vfs_done(). However, g_vfs_done() is invoked from a non-sleepable
context and cannot use M_WAITOK to allocate the event. Instead,
allocate the event in g_vfs_orphan() and save it in the softc to be
retrieved by the last call to g_vfs_done().
Reported by: Jithesh Arakkan @ Chelsio
Reviewed by: imp
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D31354
This ensures the TOE has finished processing any in-flight received
data before returning to the caller. The caller assumes it is safe to
free any open tasks or transfers (and associated buffers) after this
function returns.
Previously, data placed directly via DDP could be written to buffers
after the caller had freed the buffers.
Reported by: Jithesh Arakkan @ Chelsio
Sponsored by: Chelsio Communications
During forcible unmount after a disk failure there is a bug that
causes one or more indirdep dependency structures to fail to be
deallocated. Until we manage to track down why they fail to get
cleaned up, this code tracks them down and eliminates them so that
the unmount can succeed.
Reported by: Peter Holm
Help from: kib
Reviewed by: Chuck Silvers
Tested by: Peter Holm
MFC after: 7 days
Sponsored by: Netflix
The soft updates diagnotic code keeps a list for each type of soft
update dependency. When a new block is allocated for a file it is
initially tracked by a "newblk" dependency. The "newblk" dependency
eventually becomes either an "allocdirect" dependency or an "indiralloc"
dependency. The diagnotic code failed to move the "newblk" from the list
of "newblk"s to its new type list.
No functional change intended.
Reviewed by: Chuck Silvers (as part of a larger change)
Tested by: Peter Holm (as part of a larger change)
Sponsored by: Netflix
There is no reason now why do we need to allocate trampoline page very
early in the boot process. The only requirement for the page is that
it is below 1M to be usable by the real mode during init. This can be
handled by vm_alloc_contig() when we do the startup.
Also assert that startup trampoline fits into single page. In principle
we can do multi-page allocation if needed, but it is not.
Move the alloc_ap_trampoline() function and the boot_address variable to
i386/mp_machdep.c. Keep existing mechanism of early alloc on i386.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D31343
Note the high level differences with the latest one true awk
import. This list may grow as we learn more troublesome areas.
Updated description of the format fo the file to match the file.
I'll likely merge this change (and any followups) by direct commit to
stable/13 and stable/12 in a couple of weeks.
Sponsored by: Netflix
After b48a2770d4, static POWER8 definitions became unnecessary,
as all of them (and much more) are already present in libpmc's
PMU events.
Submitted by: Leonardo Bianconi <leonardo.bianconi@eldorado.org.br> (initial version)
Reviewed by: kbowling, mhorne
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D31334
of the /dev/hpet and /dev/hv_tsc devices, to not leak internal libc
filedescriptors on exec.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31344
KMSAN instrumentation requires thread-local storage to track
initialization state for function parameters and return values. This
buffer is accessed as part of each function prologue. It is provided by
the KMSAN runtime, which looks up a pointer in the current thread's
structure.
When KMSAN is configured, init_secondary() is instrumented, but this
means that GS.base must be initialized first, otherwise the runtime
cannot safely access curthread. Work around this by loading GS.base
before calling init_secondary(), so that the runtime can at least check
curthread == NULL and return a pointer to some dummy storage. Note that
init_secondary() still must reload GS.base after calling lgdt(), which
loads a selector into %gs, which in turn clears the base register.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31336
There is no reason to initialize it to anything else, and this matches
initialization of the BSP. No functional change intended.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31336
This is required for KASAN: when a module is unloaded, poisoned regions
(e.g., pad areas between global variables) are left as such, so if they
are reused as KLDs are loaded, false positives can arise.
Reported by: pho, Jenkins
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31339
FUTEX_LOCK_PI2 was added to support clock selection as FUTEX_LOCK_PI uses a
CLOCK_REALTIME based absolute value since it was implemented, but it does not
require that the FUTEX_CLOCK_REALTIME bit is set, because that was introduced
later.
MFC after: 2 weeks
In the Linux emulation layer linux_tdfind() has a special purpose to
handle glibc specific TID mangling and we should use it instead of tdfind().
MFC after: 2 weeks
Handle some races in handle_futex_death() which can prevents a wakeup of
potential waiters which can cause these waiters to block forever.
Differential Revision: https://reviews.freebsd.org/D31280
MFC after: 2 weeks
Linux futex documentation explicitly states that EINVAL is returned if
the futex is not 4-byte aligned. Check futex alignment as a Linux do
and return EINVAL.
Differential Revision: https://reviews.freebsd.org/D31279
MFC after: 2 weeks
Follow the r349951 (30b3018d), add check to react to stops and requests
to terminate between retries.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D31254
MFC after: 2 weeks
According to fetch(9) fueword facility designed to fetch atomically
small amount of data from user space.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D31239
MFC after: 2 weeks
The umtx_pi_frop() will be used by Linux emulation layer.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D31238
MFC after: 2 weeks
