echo | awk 'BEGIN {i=$1; print i}' prints a boatload of stack
garbage. NUL terminate the memory returned from malloc to prevent it.
Obtained from: OpenBSD run.c 1.40
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D12379
out. Since it can't be paged out, it is never actually enqueued in a
paging queue. Nonetheless, passing PQ_INACTIVE to vm_page_unwire()
creates the appearance that the page "frame" is being enqueued in the
inactive queue. As of r288122, we can avoid this false impression by
passing PQ_NONE.
MFC after: 1 week
- Import print_function from __future__ and use print(..) instead of `print ..`.
- Use repr instead of backticks when the object needs to be dumped, unless
print(..) can do it lazily. Use str instead of backticks as appropriate
for simplification reasons.
This doesn't fully convert these modules over py3k. It just gets over some of
the trivial compatibility hurdles.
Add a DDB command that mirrors sysctl debug.witness.badstacks.
Reapply r323935 after fixing trivial deficiency. I forgot to compile with
WITNESS enabled. Thanks emaste@ for fixing the build while I was asleep.
Reported by: rstone
Reviewed by: rstone (previous version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12468
1) Choose correct Firmware options for HW LRO for best performance
2) Delete TBD and other comments which are not required.
3) Added sysctl interface to enable / disable / modify different factors
of HW LRO.
4) Disabled HW LRO by default to avoid issues with packet forwarding
This allows much better control over the LRO configuration via sysctls, and
uses much better defaults. Hardware LRO can now be enabled/disabled
independantly from the software LRO, and the tuning parameters are exposed.
manpage updates coming soon.
Submitted by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed by: shurd, sbruno
Approved by: sbruno (mentor)
Sponsored by: Broadcom Limited
Differential Revision: https://reviews.freebsd.org/D12223
Move TX out of the enqueue() path. As a result, we need
to have ifmp_ring_check_drainage() pick up from the abdicate state.
We also need to either enqueue the TX task, or check drainage
after calling ifmp_ring_enqueue() to ensure it's sent.
This change results in a 30% small packet forwarding improvement.
Reviewed by: olivier, sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12439
Previously, it was just a pointer which was copied, but
some callers pass in a stack variable which will go out of scope.
Add GROUPTASK_NAMELEN macro (32) and snprintf() the name into it,
using "grouptask" if name is NULL. We can now safely include
gtask->gt_name in console messages.
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12449
This allows tuning the rx budget for special load profiles
as well as more easily testing to determine sane defaults.
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12445
Build a list of mbufs to pass to if_input() after LRO. Results in
12% small packet forwarding rate improvement.
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12444
If the packet is smaller than MTU, disable the TSO flags.
Move TCP header parsing inside the IS_TSO?() test.
Add a new IFLIB_NEED_ZERO_CSUM flag to indicate the checksums need to be zeroed before TX.
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12442
build on arm/armv6 images.
Pointyhat: gjb (myself)
MFC after: immediate
MFC note: releng/10.4 has broken because of this
Sponsored by: The FreeBSD Foundation
check hash to cylinder groups. If a check hash fails when a cylinder
group is read, no further allocations are attempted in that cylinder
group until it has been fixed by fsck. This avoids a class of
filesystem panics related to corrupted cylinder group maps. The
hash is done using crc32c.
Check hases are added only to UFS2 and not to UFS1 as UFS1 is primarily
used in embedded systems with small memories and low-powered processors
which need as light-weight a filesystem as possible.
Specifics of the changes:
sys/sys/buf.h:
Add BX_FSPRIV to reserve a set of eight b_xflags that may be used
by individual filesystems for their own purpose. Their specific
definitions are found in the header files for each filesystem
that uses them. Also add fields to struct buf as noted below.
sys/kern/vfs_bio.c:
It is only necessary to compute a check hash for a cylinder
group when it is actually read from disk. When calling bread,
you do not know whether the buffer was found in the cache or
read. So a new flag (GB_CKHASH) and a pointer to a function to
perform the hash has been added to breadn_flags to say that the
function should be called to calculate a hash if the data has
been read. The check hash is placed in b_ckhash and the B_CKHASH
flag is set to indicate that a read was done and a check hash
calculated. Though a rather elaborate mechanism, it should
also work for check hashing other metadata in the future. A
kernel internal API change was to change breada into a static
fucntion and add flags and a function pointer to a check-hash
function.
sys/ufs/ffs/fs.h:
Add flags for types of check hashes; stored in a new word in the
superblock. Define corresponding BX_ flags for the different types
of check hashes. Add a check hash word in the cylinder group.
sys/ufs/ffs/ffs_alloc.c:
In ffs_getcg do the dance with breadn_flags to get a check hash and
if one is provided, check it.
sys/ufs/ffs/ffs_vfsops.c:
Copy across the BX_FFSTYPES flags in background writes.
Update the check hash when writing out buffers that need them.
sys/ufs/ffs/ffs_snapshot.c:
Recompute check hash when updating snapshot cylinder groups.
sys/libkern/crc32.c:
lib/libufs/Makefile:
lib/libufs/libufs.h:
lib/libufs/cgroup.c:
Include libkern/crc32.c in libufs and use it to compute check
hashes when updating cylinder groups.
Four utilities are affected:
sbin/newfs/mkfs.c:
Add the check hashes when building the cylinder groups.
sbin/fsck_ffs/fsck.h:
sbin/fsck_ffs/fsutil.c:
Verify and update check hashes when checking and writing cylinder groups.
sbin/fsck_ffs/pass5.c:
Offer to add check hashes to existing filesystems.
Precompute check hashes when rebuilding cylinder group
(although this will be done when it is written in fsutil.c
it is necessary to do it early before comparing with the old
cylinder group)
sbin/dumpfs/dumpfs.c
Print out the new check hash flag(s)
sbin/fsdb/Makefile:
Needs to add libufs now used by pass5.c imported from fsck_ffs.
Reviewed by: kib
Tested by: Peter Holm (pho)
illumos/illumos-gate@42b141117242b1411172https://www.illumos.org/issues/8648
I'm opening this bug to track integration of the following ZFS on Linux
commit into illumos:
commit f763c3d1df
Author: LOLi <loli10K@users.noreply.github.com>
Date: Mon Aug 21 17:59:48 2017 +0200
Fix range locking in ZIL commit codepath
Since OpenZFS 7578 (1b7c1e5) if we have a ZVOL with logbias=throughput
we will force WR_INDIRECT itxs in zvol_log_write() setting itx->itx_lr
offset and length to the offset and length of the BIO from
zvol_write()->zvol_log_write(): these offset and length are later used
to take a range lock in zillog->zl_get_data function: zvol_get_data().
Now suppose we have a ZVOL with blocksize=8K and push 4K writes to
offset 0: we will only be range-locking 0-4096. This means the
ASSERTion we make in dbuf_unoverride() is no longer valid because now
dmu_sync() is called from zilog's get_data functions holding a partial
lock on the dbuf.
Fix this by taking a range lock on the whole block in zvol_get_data().
Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Alexander Motin <mav@FreeBSD.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: LOLi <loli10K@users.noreply.github.com>
MFC after: 10 days
illumos/illumos-gate@42b141117242b1411172https://www.illumos.org/issues/8648
I'm opening this bug to track integration of the following ZFS on Linux
commit into illumos:
commit f763c3d1df
Author: LOLi <loli10K@users.noreply.github.com>
Date: Mon Aug 21 17:59:48 2017 +0200
Fix range locking in ZIL commit codepath
Since OpenZFS 7578 (1b7c1e5) if we have a ZVOL with logbias=throughput
we will force WR_INDIRECT itxs in zvol_log_write() setting itx->itx_lr
offset and length to the offset and length of the BIO from
zvol_write()->zvol_log_write(): these offset and length are later used
to take a range lock in zillog->zl_get_data function: zvol_get_data().
Now suppose we have a ZVOL with blocksize=8K and push 4K writes to
offset 0: we will only be range-locking 0-4096. This means the
ASSERTion we make in dbuf_unoverride() is no longer valid because now
dmu_sync() is called from zilog's get_data functions holding a partial
lock on the dbuf.
Fix this by taking a range lock on the whole block in zvol_get_data().
Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Alexander Motin <mav@FreeBSD.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: LOLi <loli10K@users.noreply.github.com>
illumos/illumos-gate@bd9d3f9046bd9d3f9046https://www.illumos.org/issues/8661
The "zil-cw1" dtrace probe was previously removed in 8558, and the "zil-cw2"
probe should have been removed in that patch as well. Unfortunately, the "zil-
cw2" was not removed in 8558, so this bug is to track it's removal.
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Prakash Surya <prakash.surya@delphix.com>
MFC after: 1 week
illumos/illumos-gate@bd9d3f9046bd9d3f9046https://www.illumos.org/issues/8661
The "zil-cw1" dtrace probe was previously removed in 8558, and the "zil-cw2"
probe should have been removed in that patch as well. Unfortunately, the "zil-
cw2" was not removed in 8558, so this bug is to track it's removal.
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Prakash Surya <prakash.surya@delphix.com>
illumos/illumos-gate@2840dce1a02840dce1a0https://www.illumos.org/issues/8600
ZFS channel programs should be able to create snapshots.
In addition to the base snapshot functionality, this will likely entail adding
extra logic to handle edge cases which were formerly not possible, such as
creating then destroying a snapshot in the same transaction sync.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Chris Williamson <chris.williamson@delphix.com>
illumos/illumos-gate@000cce6b6f000cce6b6fhttps://www.illumos.org/issues/8592
ZFS channel programs should be able to perform a rollback. This logic will
probably look pretty similar to zfs.sync.destroy().
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Brad Lewis <brad.lewis@delphix.com>
illumos/illumos-gate@1c18e8fbd81c18e8fbd8https://www.illumos.org/issues/8502
The code in lib/libzfs/common/libzfs_mount.c already basically handles
the case when libshare is not installed. We just need to not fail in
zfs_init_libshare_impl. I tested this in lx and things work as
expected. I also tested there trying to set sharenfs and sharesmb on
the delegated dataset. Neither is allowed from within a zone. The
spew of msgs from a native zone is not ZFS specific. I see the same
spew simply running the share command.
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Yuri Pankov <yuripv@gmx.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Jerry Jelinek <jerry.jelinek@joyent.com>
Bump the FreeBSD version to force recompilation of external
kernel modules due to structure change.
PR: 222504
Submitted by: Greg V <greg@unrelenting.technology>
MFC after: 1 week
Sponsored by: Mellanox Technologies
The device index, partition index and reference counter are all positive
numbers. However, since our internal partition number may be negative
to indicate GPT table, the compare expression need to take care when comparing
pdinfo_t and partition data.
I accidentally introduced different whitespace style in r323878. I'm not
used to using tabs for indentation in Python scripts.
Whitespace only; no functional change.
Sponsored by: Dell EMC Isilon
Prevent cam_iosched_iops_tick() from discarding 'unspent' ios unless
it's a new accounting interval.
Previously ios that weren't used between ticks were lost, as a result
the iops limiter could enforce a limit below the configured maximum.
Obtained from: ElectroBSD
Submitted by: Fabian Keil
PR: 221974
Previously the iops limiter would always allow at least
quanta ios per second as cam_iosched_iops_tick() never set
ios->l_value1 below 1.
Submitted by: Fabian Keil <fk@fabiankeil.de>
Obtained from: ElectroBSD
PR: 221974
In particular, support chaining an AES cipher with an HMAC for a request
including AAD. This permits submitting requests from userland to encrypt
objects like IPSec packets using these algorithms.
In the non-GCM case, the authentication crypto descriptor covers both the
AAD and the ciphertext. The GCM case remains unchanged. This matches
the requests created internally in IPSec. For the non-GCM case, the
COP_F_CIPHER_FIRST is also supported since the ordering matters.
Note that while this can be used to simulate IPSec requests from userland,
this ioctl cannot currently be used to perform TLS requests using AES-CBC
and MAC-before-encrypt.
Reviewed by: cem
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D11759
This requests that the cipher be performed before rather than after
the HMAC when both are specified for a single operation.
Reviewed by: cem
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D11757
